scholarly journals The Gel Soap with Raw Materials of Lerak Fruit (Sapindus rarak DC)

2020 ◽  
Vol 2 (1) ◽  
pp. 1-6
Author(s):  
Fitria Wijayanti ◽  
Mayang Sari ◽  
Roni Suprayitno ◽  
Dian Aminin
Keyword(s):  
Secondary Metabolites ◽  
Secondary Metabolite ◽  
Noble Metal ◽  
Raw Materials ◽  
Raw Material ◽  
Soy Sauce ◽  
Test Results ◽  
Natural Materials ◽  
Quality Testing

Lerak (sapindus rarak DC) is one of the plants that is often used as a noble metal washer, facial cleanser as a remover for acne and as an insecticide, especially earthworms. In this study the manufacture of soap gel by using Lerak plants. Lerak fruit (Sapindus rarak DC) is one of the natural ingredients that can be used as an alternative in soap raw materials. Lerak fruit (S. rarak) contains several secondary metabolites. The most dominant secondary metabolite is saponin. These saponins act as raw material for making soap. The purpose of this study is the use of natural materials, especially Lerak fruit as raw material for gel soap Tests conducted on soap are foam test, soap quality with experiments on several stains and organoleptic soap tests. The results obtained Lerak fruit can be used as raw materials for soap. The foam test results on the soap found that the soap foaming durability was longer. The results of soap quality testing on several stains namely charcoal stains, soy sauce stains and sauces prove the soap can clean stains well. The organoleptic results get a distinctive aroma, odor, and average of density are 1.01.

PEMBUATAN PESTISIDA ORGANIK MENGGUNAKAN METODE EKSTRAKSI DARI SAMPAH DAUN PEPAYA DAN UMBI BAWANG PUTIH

Jurnal Dampak ◽  
2013 ◽  
Vol 10 (1) ◽  
pp. 46 ◽  
Author(s):  
Elvie Yennie ◽  
Shinta Elystia
Keyword(s):  
Secondary Metabolites ◽  
Raw Materials ◽  
Larval Mortality ◽  
Maximum Yield ◽  
Ethanol Extract ◽  
Operating Conditions ◽  
Raw Material ◽  
Mosquito Larvae ◽  
Soaking Time ◽  
Natural Materials

ABSTRAKPestisida adalah substansi kimia dan bahan lain yang digunakan untuk mengendalikan berbagai hama yang terbukti mengganggu. Pestisida dapat dibuat dari bahan alam yang salah satunya dari daun pepaya dan umbi bawang putih. Hal ini diiringi dengan mudahnya didapatkan bahan alam tersebut sehingga muncullah ide untuk membuat pestisida dari bahan tersebut. Tujuan dari penelitian ini adalah mempelajari pengaruh variasi waktu perendaman bahan baku dengan variasi pelarut, menghitung rendemen dari variasi waktu perendaman bahan baku dan menguji senyawa metabolit sekunder dari rendemen maksimum lalu menguji toksisitas ekstrak yang diperoleh terhadap larva nyamuk. Penelitian ini dilakukan dengan metode ekstraksi maserasi menggunakan pelarut metanol dan etanol. Variasi waktu perendaman 3,5,7 hari dengan suhu lingkungan, nisbah larutan padatan sebesar 1 : 4, setelah proses perendaman dilakukan penyaringan dan hasil saringan berupa filtrat didestilasi dengan kondisi operasi temperatur 80o C selama 50 menit. Lalu ekstrak diuji senyawa metabolit sekundernya, diukur pHnya dan toksisitas terhadap hewan uji. Kondisi operasi maksimum diperoleh pada waktu perendaman selama 7 hari dengan kadar rendemen sebesar 41,35 % dengan pH 5,79 untuk hasil ekstrak metanol dan 36,06 % dengan pH 5,86 untuk hasil ekstrak etanol. Metabolit sekunder yang berhasil diidentifikasi adalah alkaloid, flavonoid, saponin, tanin dan sulfur. Konsentrasi maksimum yang membunuh larva nyamuk adalah sebesar 3000 ppm dengan rata-rata kematian larva 95 % untuk ekstrak etanol dan 97,5 % untuk ekstrak metanol.Kata kunci: pestisida alami, daun pepaya dan umbi bawang putih, ekstraksiABSTRACTPesticides are chemicals and other substances used to control pests that could prove disruptive. Pesticides can be made from natural materials, one of which from the leaves of papaya and garlic bulbs. It is accompanied by easily obtained natural materials that came the idea to create pesticide of these materials. The purpose of this research was to study the effect of variations in the time of immersion of raw materials with a variety of solvents, calculate the yield of raw material variation of soaking time and the test compounds secondary metabolites of maximum yield and test the toxicity of exstracts obtained against mosquito larvae. The research was done by maceration extraction method using methanol and ethanol. 3,5,7 days soaking time variation with temperature, the solid solution ratio 1 : 4, after immersion do filtering was done and filter the results in the form of the filtrate is distilled at 80o C temperature operating conditions for 50 minutes. Then extract secondary metabolites were tested, measured their pH and toxicity towards the test animals. Maximum operating conditions obtained at the time of immersion for 7 days with high levels of yields at 41.35 % with a pH of 5.79 for methanol extract and 36.06 % with a pH 5.86 to extract the ethanol. Secondary metabolites that were succesfuly identified are alkaloids, flavonoids, saponins, tannins, and sulfur.Maximum concentration that killed mosquito larvae is equal to 3000 ppm with an average of 95 % larval mortality for ethanol extract and 97.5 % for methanol extract.Keyword : natural pesticides, papaya and garlic bulbs, extraction

scholarly journals Nori Preference Level based on the Condition of the Raw Material Eucheuma cottonii Seaweed

2019 ◽  
pp. 1-10 ◽  
Author(s):  
Dinda Widu Ramasari ◽  
Evi Liviawaty ◽  
Atikah Nurhayati ◽  
Rusky Intan Pratama ◽  
Eddy Afrianto
Keyword(s):  
Water Content ◽  
Raw Materials ◽  
Kappaphycus Alvarezii ◽  
Raw Material ◽  
Crude Fiber ◽  
Test Results ◽  
Crude Fiber Content ◽  
Physical Tests ◽  
Bayes Test ◽  
Eucheuma Cottonii

Aims: To determine the level of preference of panelists for Nori based on the condition of raw materials of dry and semi-dried Kappaphycus alvarezii (formerly Eucheuma cottonii) seaweed. Study Design: The research was conducted experimentally. Place and Duration of Study: Organoleptic tests were carried out in the Laboratory of Fisheries Product Processing Faculty of Fisheries and Marine Sciences, University of Padjadjaran. Physical tests and chemical tests conducted at the Laboratory of Research and Biological Resources and Biotechnology Research Institute at the Society (LPPM), IPB, between March 2019 and April 2019. Methodology: The research was conducted experimentally consisted of 3 treatments with 20 semi-trained panelists as replication from Fisheries students of Fisheries and Marine Science Faculty, University of Padjadjaran who had experienced the organoleptic assessment. Hedonic tests were to determine the level of panelists preference for the products which included appearance, aroma, texture, and flavor, the results were statistically analyzed using Friedman Test and Bayes Test. Physical tests (thickness and hardness) and chemical tests (water content and crude fiber content) were carried out on the most preferred treatment product and analyzed descriptively. Results: The organoleptic test results of Nori from Kappaphycus alvarezii (formerly Eucheuma cottonii) seaweed with dry raw material conditions had the highest average value on each characteristic compared to other treatments, appearance of 7.70, aroma of 7.00, texture of 7.50, and flavor of 7.90. The Bayes test results on the treatment of Nori from Kappaphycus alvarezii (formerly Eucheuma cottonii) seaweed with dry raw materials conditions having the highest alternative which was 8.54 with the most influential taste criteria for the assessment. The thickness of the Nori was 0.108 mm, the hardness was 1916.16 gf, water content of Nori was 17.23% and crude fiber content was 10.10%. Conclusion: The treatment of Nori with raw materials of dry conditions was the most preferred by panelists.

Effect of Borax on Lightweight Material from Cullet and Fly Ash

2016 ◽  
Vol 690 ◽  
pp. 109-113 ◽  
Author(s):  
Sutthima Sriprasertsuk ◽  
Phatthiya Suwannason ◽  
Wanna T. Saengchantara
Keyword(s):  
Thermal Conductivity ◽  
Heat Treatment ◽  
Compressive Strength ◽  
Fly Ash ◽  
Sodium Silicate ◽  
Raw Materials ◽  
Raw Material ◽  
Test Results ◽  
Heat Process ◽  
Lightweight Material

This work investigated the recycling of fly ash waste and cullet as the raw materials for lightweight bodies produced by heat treatment and using sodium silicate as the binder. Borax was mixed with fly ash and cullet, and put into the block in dimension 10x10x2 cm3. The lightweight materials thus produced were then sintered at temperature of 800 °C. Density, compressive strength and thermal conductivity were determined. Borax showed a positive sintering effect on the porosity of lightweight material during the heat process. The compressive strength of lightweight material diminished with the reduction of density and thermal conductivity. Lightweight material manufactured with borax showed the lower density and thermal conductivity accompanied by the higher compressive strength. The test results indicated that using fly ash and cullet as the raw material with borax could obtain the lightweight material, thus enhancing the possibility of its reuse in a sustainable way.

scholarly journals PROSES PEMBUATAN DAN PENGUJIAN BENDA UJI KERAMIK UNTUK BAHAN BAKU ISOLATOR LISTRIK KERAMIK PORSELEN (MANUFACTURING AND TESTING PROCESS OF CERAMIC SPECIMENS FOR RAW MATERIALS OF ELECTRICAL ISOLATOR PORCELAIN CERAMIC)

2016 ◽  
Vol 10 (3) ◽  
pp. 173-180
Author(s):  
Wahyu wahyu Garinas
Keyword(s):  
Test Object ◽  
Test Specimen ◽  
Raw Materials ◽  
Separation Process ◽  
Raw Material ◽  
Materials Processing ◽  
Test Results ◽  
Composition Materials ◽  
Ball Clay

Penelitian ini merupakan bagian dari kegiatan mencari bahan baku untuk pembuatan isolator keramik porselen. Bahan baku untuk pembuatan benda uji keramik sebagian besar menggunakan bahan baku lokal.Proses pengolahan bahan baku pada penelitian ini  : pembuatan komposisi, pengolahan bahan dan pembuatan benda uji.Metode yang akan dilakukan dalam pengolahan ini  yaitu proses pemisahan dengan cara basah dan kering.Untuk mengetahui kualitas kelistrikan dari bahan baku keramik maka dibuat benda uji dan dilakukan uji tegangan tembus listrik.Hasil uji terhadap benda uji ternyata  semua benda uji masih belum memenuhi standar IEC maupun ASTM. Nilai hasil uji terhadap sampel  sekitar   (7,99 - 9,35) kV/mm dan semua sampel  belum memenuhi  standar yang direkomendasikan oleh PLN (9,85 kV/mm). Hasil uji tersebut menunjukkan bahwa sampel no. 5 dan 6 yang mendekati standar dari PLN. Perlu evaluasi terhadap  komposisi , bahan dan proses pembuatan dari benda uji keramik. Kata Kunci : Bahan mentah keramik (kaolin, felspar, ball clay,kuarsa), pengujian  benda uji, pengujian tegangan tembus, kualitas bahan keramik. Abstract This study is part of the looking for raw materials for the manufacture of ceramic porcelain insulators.The raw material for the manufacture of ceramic test specimens mostly using local raw materials.The processing of the raw material in this study: preparing a composition, materials processing and manufacturing of the test object. The method will be done in this processing is the separation process by means of wet and dry.To know the the quality of the electrical ceramic raw materials then created of the test specimen and test the electrical Puncture Voltage.The test results of the test specimen it turns out all specimens still does not meet PLN (IEC and ASTM) standards.Value test results on samples approximately (7.99 to 9.35) kV / mm and all samples do not meet the standards recommended by PLN.The test results showed that the samples no. 5 and 6 are closer to a standard of PLN.Needs to be evaluation of the composition, materials and manufacturing process of ceramic test specimen. Keywords :  raw material ceramic, specimens test, puncture voltage test, ceramic material quality.

scholarly journals FEASIBILITY OF THE UTILIZATION CONDENSATE AS RAW MATERIAL FOR PETROCHEMICAL

2018 ◽  
Vol 39 (3) ◽  
Author(s):  
Holisoh Holisoh
Keyword(s):  
Crude Oil ◽  
Petrochemical Industry ◽  
Raw Materials ◽  
Raw Material ◽  
Process Unit ◽  
Test Results ◽  
Economic Calculation ◽  
Hydrocarbon Product

The utilization of condensate is currently not optimal yet, where most of its production are mixed with crude oil which results in significant shrinkage in oil volume. As a hydrocarbon product, condensate can be utilized as a raw material for petrochemical industry, fuel and solvent. Currently raw materials of petrochemical industry in Indonesia are imported from other countries. To optimize the utilization of condensate it is necessary to conduct a characteristic test of several types of condensate and then conducted a utilization analysis based on their number and its nature. Paraffin, Olefin, Naphthenic and Aromatic (PONA) test results showed that the six samples of condensate in the test had a fairly high paraffin content of above 60%. The highest paraffin content was 82.84% for condensate B and the lowest was 61.4% for condensate E. The six condensate samples contain higher paraffin, which are suitable for use as raw material for petrochemical olefin.The results of the economic calculation of the construction unit Olefin Process Center with a capacity of 100,000 BPSD, which is an IRR as 22.8 %, the NPV as of US $ 1,801,491,951.12 , POT for 4.1 years, and PI as 1.87. Developing of Olefin Process Unit Center being constructed in Indonesia is economical worthy.

scholarly journals Analisis faktor – faktor yang mempengaruhi produksi pada industri rumah tangga (studi kasus : industri kerupuk udang di Desa Lambur Luar Kecamatan Muara Sabak Timur Kabupaten Tanjung Jabung Timur)

2020 ◽  
Vol 9 (1) ◽  
pp. 13-25
Author(s):  
Trisa Mushandry Pratiwi ◽  
Hardiani Hardiani ◽  
Adi Bhakti
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Coefficient Of Determination ◽  
Test Results ◽  
Socioeconomic Characteristics ◽  
Independent Variables ◽  
The Village

The purpose of this study is (1) To analyze the socioeconomic characteristics of Producers in the Shrimp Crackers Home Industry in the Village of Lambur Luar Tanjung Jabung Timur Regency, (2) To analyze the effect of capital, labor, prices and raw materials on production in the Home Industry Shrimp Crackers in Lambur Luar Village, Tanjung Jabung Timur Regency. The results showed that all independent variables (capital, labor, prices and raw materials) affected the production of the shrimp cracker industry in Lambur Luar Village. Judging from the test results obtained by the coefficient of determination ( ) of 0.963460. This is aimed at capital, labor, prices and raw materials able to influence production by 96.34 percent and the remaining 3.66 percent for other variables not included in this study. Whereas if tested partially, capital, labor, price and raw material variables have a positive and significant effect on production in the shrimp cracker industry in Lambur Luar Village.

PERBAIKAN MUTU BALL CLAY UNTUK BAHAN BAKU KERAMIK HALUS DENGAN PROSES PENGENDAPAN = THE IMPROVEMENT QUALITY OF BALL CLAY FOR FINE CERAMIC RAW MATERIALS USING PRECIPITATION PROCESS.

2015 ◽  
Vol 9 (3) ◽  
pp. 157-166
Author(s):  
Wahyu Garinas
Keyword(s):  
Grain Size ◽  
Chemical Composition ◽  
Raw Materials ◽  
Ceramic Materials ◽  
Raw Material ◽  
Precipitation Process ◽  
Test Results ◽  
Fine Ceramic ◽  
West Kalimantan ◽  
Ball Clay

Ball clay quality are derived from within the country is very variety and generally rather difficult to get raw materials as needed. This research used ball clay from the West Kalimantan and West Java area.Ball clay is one of the most important raw materials for the manufacture of fine ceramic. To get the ball clay raw materials in accordance with the standards it is necessary to processing of raw materials. Processing of ball clay in this research conducted by precipitation and filtration magnet. Testing of ball clay raw materials are : test chemical composition by wet methods (SNI. 15-0449-1989) and grain size of raw material (SNI.15-0578-1996). Ball clay that has been processed will be tested with the same method of SNI. Test results before and processed will be compared with a standard of quality ball clay(SNI, NGK, India) for fine ceramic materials. The test results of chemical composition and grain size ball clay raw material showed that samples from west kalimantan qualified for fine ceramic materials and samples from other areas did not meet the standards (SNI, NGK, India). ABSTRAKMutu ballclay yang terdapat di dalam negeri sangat beragam dan umumnya agak sulit mendapatkan bahan baku yang sesuai dengan kebutuhan. Pada penelitian ini digunakan ball clay yang berasal dari daerah Kalimantan Barat, Jawa Barat dan Jawa Timur. Ball clay merupakan salah satu bahan baku penting untuk pembuatan keramik halus. Untuk mendapatkan bahan baku ball clay sesuai dengan standar maka perlu dilakukan pengolahan bahan baku. Pengolahan ball clay dalam penelitian ini dilakukan dengan cara pengendapan dan penyaringan magnet. Pengujian terhadap bahan mentah ball clay meliputi : uji komposisi kimia dengan metode basah (SNI. 15-0449-1989) dan pengujian besar butir (SNI.15-0578-1996). Ball clay yang sudah diolah nantinya akan diuji dengan metode SNI yang sama. Hasil uji sebelum dan terolah akan dibandingkan dengan standar mutu ball clay untuk bahan keramik halus. Hasil uji dari komposisi kimia dan besar butir ball clay bahan mentah menunjukan bahwa sampel dari Kalbar memenuhi syarat untuk bahan keramik halus dan sampel dari daerah lainnya ternyata tidak memenuhi standar (SNI, NGK. India).

Research on the Technical Conditions on Synthesizing Calcium Zirconate Material

2011 ◽  
Vol 287-290 ◽  
pp. 1765-1770
Author(s):  
Jie Gang You ◽  
Guo Dong Zhang ◽  
Dian Li Qu
Keyword(s):  
Firing Temperature ◽  
Raw Materials ◽  
Raw Material ◽  
Calcium Zirconate ◽  
Test Results ◽  
Zirconia Powder ◽  
Impurity Composition ◽  
Synthetic Rate ◽  
Moulding Pressure ◽  
Transmission Quality

The synthesizing CaZrO3are prepared with fused zirconia powder (0.044mm), monoatomic zirconia powder (0.044mm), desilication zirconia powder (0.044mm) and calcium oxide powder (0.044mm). The effect of different moulding pressure and firing temperature on synthesizing CaZrO3has been studied in this paper. The test results show that: The impurity composition SiO2and Al2O3in raw material have participated in reaction, and generated liquid, accelerated transmission quality speed of reaction. Desilication ZrO2is the best ZrO2raw material to synthesizing CaZrO3in above three ZrO2raw materials, firing temperature markedly influence the synthetic rate of CaZrO3, but moulding pressure is not this. Desilication ZrO2and CaO as raw material, firing 1600°C for 3h, pressure at 160Mpa and one stage burning process are the best technical conditions to synthesize CaZrO3.

scholarly journals Analisis Pengendalian Kualitas Bahan Baku Acrylic Resin Pada Produk Spray Paint di PT X

2021 ◽  
Vol 1 (1) ◽  
pp. 31-41
Author(s):  
Nurlita Utami ◽  
Sena Atmaja ◽  
Yogi Priyo Istiyono
Keyword(s):  
Raw Materials ◽  
Film Formation ◽  
Acrylic Resin ◽  
Raw Material ◽  
Test Results ◽  
Literature Study ◽  
Factors Affecting ◽  
Analysis Process ◽  
Poor Adhesion

Thermo Plastic Acrylic resin has an important role in the manufacture of spray paint, namely as a binder or binder. The resin in paint has a function as a film formation, has adhesion to the substrate as well as pigment binders and additives, so that to produce a spray paint with good quality mechanical properties, PT X must be selective in controlling the quality of the raw material for Thermo Plasic Acrylic Resin. The purpose of this study was to determine the problems faced by PT X related to the quality of Thermo Plastic Acrylic Resin raw materials, to identify the most dominant factors affecting the quality of these raw materials and to formulate the most appropriate solutions to be applied in improving the quality of these raw materials. This research uses observation, interview, and literature study methods. Sources of data came from stakeholders and quality control staff of PT X. This study used check sheets, histogram diagrams, u-control maps, and fishbone diagrams to complete the analysis process. From the test results of the Thermoplastic Acrylic Resin raw material, it is known that the factor that causes rejection is due to adhesion, namely 53.57%, gloss 33.33%, and dry touch 13.10%, all three of the total raw materials that are rejected when the raw material is applied in form paint and spray on the film plate. The most dominant cause of reject was poor adhesion, namely 53.57% of the total reject raw materials.

scholarly journals The study of primary productivity of lichenized epigeic fungi in the pine forests of the Kostroma Region

2021 ◽  
Vol 10 (1) ◽  
pp. 102-106
Author(s):  
Ksenia Vyacheslavovna Malakhova
Keyword(s):  
Secondary Metabolites ◽  
Primary Productivity ◽  
Raw Materials ◽  
Abiotic Factors ◽  
Pine Forest ◽  
Projective Cover ◽  
Lichenized Fungi ◽  
Raw Material ◽  
Pine Forests ◽  
High Biological Activity

Thalli of epigeic lichenized fungi of the genus Cladonia P. Browne are sources of high biological activity substances with a proven pharmaceutical potential. Its necessary to study characteristics of the accumulation of biomass by thalli, as well as conditions affecting the accumulation of secondary metabolites by lesions. For the first time, studies of the primary productivity and concentrations of secondary metabolites in lichens of the genus Cladonia in pine forests in the center of the European part of Russia are presented on the example of the Kostroma Region. The primary productivity of bushy lichens of the genus Cladonia in the pine forests of the Kostroma Region is in the range of 16,0534,72 g/m per year for C. arbuscula and 14,7028,18 g/m per year for C. rangiferina. The weight gain of the living part of the subset is in direct proportion to the intensity of sunlight: the optimum for C. arbuscula is 41006100 lx (0,0250 g/year), for C. rangiferina it is 38005800 lx (0,0407 g/year). The influence of abiotic factors (biotope humidity and sunlight intensity) on the parameters of primary productivity and the accumulation of secondary metabolites by thalli was revealed. The influence of biotic factors is manifested on the projective cover of species. The highest values of the projective cover, 85,67% (C. arbuscula) and 61% (C. rangiferina), are confined to well-illuminated biotopes with rarefied sunlight (thin sphagnum pine forest, sphagnum-heather pine forest slope). The maximum amount of acetone extract of secondary metabolites per weight of air-dry raw material of lichenized fungi of the genus Cladonia was isolated from well-illuminated areas of pine forests at 58007400 lx (11,541 and 15,916 mg/g q.s. of C. rangiferina and C. arbuscula raw materials, respectively). The increased humidity of the biotope and shading conditions slow down the accumulation of secondary metabolites in the subsets.

Sign in / Sign up

Export Citation Format

Share Document