scholarly journals Effect of various plant starches on the quality characteristics of starch-based sweetened cow milk yoghurt

2016 ◽  
Vol 14 (1) ◽  
pp. 119-126 ◽  
Author(s):  
MA Alim ◽  
A Wadehra ◽  
AK Singh
Keyword(s):  
Corn Starch ◽  
Potato Starch ◽  
Linear Increase ◽  
Cow Milk ◽  
Modified Starch ◽  
Colour Properties ◽  
Ph Values ◽  
Significant Difference ◽  
Addition Level ◽  
Level 2

In this study, the textural, rheological and colour properties of different starch-based sweetened cow milk yoghurt were analyzed. Stickiness increased with increased addition level of modified starch for both homogenized (-2.231 to -5.304 N) and unhomogenized (-1.505 to -4.834 N) yoghurt sample. Firmness increased linearly for unhomogenized cow milk yoghurt sample at different incorporation level (3.019 to 4.887 N) but the homogenized cow milk yoghurt samples did not shown any clear significant difference. Viscosity also increased with increased addition level of modified starch and unhomogenized yoghurt sample at different incorporation level of modified starch showed clear and significant difference from sample to sample. Firmness, stickiness and viscosity of potato starch-based cow milk yoghurt with homogenization did not show any significant difference, but unhomogenized yoghurt sample showed linear increase of viscosity and firmness that ranged from 0.213 to 0.525 Pa.s and from 2.669 to 4.014 N, respectively. Stickiness of unhomogenized sample also increased with increased potato starch incorporation level. Viscosity increased with increased corn starch incorporation for homogenized sample. The pH values were more or less similar and the colour values showed it was lightness as white for all cases. The highest incorporation level (2%) was found for corn starch followed by potato (1.5%) and modified (1.0%) starch.J. Bangladesh Agril. Univ. 14(1): 119-126, June 2016

Effect of Plant Starch on the Production of Glucoamylase from Aspergillus niger

2011 ◽  
Vol 396-398 ◽  
pp. 1502-1505 ◽  
Author(s):  
Xin Hong Liang ◽  
Gong Ling Zhao ◽  
Zu Feng Guo ◽  
Yu Tang
Keyword(s):  
Sweet Potato ◽  
Corn Starch ◽  
Ph Value ◽  
Potato Starch ◽  
Wheat Starch ◽  
Ph Change ◽  
Fermentation Time ◽  
Glucoamylase Activity ◽  
Significant Difference ◽  
Sweet Potato Starch

Abstract. Glucoamylase is an inducible enzyme and generally induced in the presence of starch. Corn starch, wheat starch, sweet potato starch and potato starch were used as the carbon sources to produce the glucoamylase by A. niger FJL0801. The results showed that the maximum glucoamylase activity was 594.511.7 U/mL when 4% sweet potato starch was used as the carbon source, its enzyme activity was increased by 34.9% than potato starch, by 17.2% than wheat starch and by 4.6% than corn starch. In the four media, the adaptive phage of A. niger FJL0801 were all 0-12 h, the logarithmic growth phase all 12-60 h, and the stationary phase all 60-192 h. The maximum biomass of the strain was 1.950.09 μg/mL in the corn starch medium. The glucoamylase activity was inversely proportional to the growth rate of A. niger FJL0801. The final pH value was all within 6.960.057.110.07 in the four midia. There was no significant difference at 0.05 probability level between the pH of the four media at the same fermentation time. The pH change was not the reason for glucoamylase activity by A. niger FJL0801 used different plant starch.

scholarly journals Comparative Analysis of Different Local Anesthetic Solutions Available in Market: An In Vitro and Clinical Study

2021 ◽  
Author(s):  
Eisha Imran ◽  
Faisal Moeen ◽  
Beenish Abbas ◽  
Bakhtawar Yaqoob ◽  
Mehreen Wajahat ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Local Anesthetic ◽  
Compositional Analysis ◽  
Bacterial Activity ◽  
Similar Composition ◽  
Ph Values ◽  
Significant Difference ◽  
The Mean ◽  
The Difference

Abstract Objectives The study aimed to evaluate and compare various commercially available local anesthetic solutions. Materials and Methods A total of 150 commercially available local anesthetic cartridges of similar composition (2% lidocaine with epinephrine 1:100,000) were randomly collected and divided into 3 groups. The designations of groups were selected from their product names such that each group consisted of 60 cartridges. Group S (Septodont, France) Group M (Medicaine, Korea) and Group H (HD-Caine, Pakistan). The samples were divided into five sub-groups, each consisting of 10 cartridges from each group to investigate each parameter. Results The acquired data was statistically analyzed and compared (using SPSS version 12). Compositional analysis revealed a non-significant (P>0.05) difference when the three Groups were compared with standard lidocaine and epinephrine solutions. The mean pH values of samples from group S, M and H respectively fell within the range of pH values of commercially available solutions. Non-significant difference in EPT values of Group S and H was found when efficacy was compared (p = 0.3), however a significant difference (p < 0.01) was observed in contrast to Group M. Anti-bacterial activity was observed in all the group and a non-significant difference in cell viability values of Group S and M was found (p = 0.6), while the difference was significant in comparison to Group H. Conclusion Within the limitations of these investigations, it appears that the properties of different manufacturers fall within the recommended ranges as mentioned in literature and do not appear to be statistically different in the variables we have tested.

scholarly journals Modern Biodegradable Plastics—Processing and Properties Part II

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2523
Author(s):  
Janusz W. Sikora ◽  
Łukasz Majewski ◽  
Andrzej Puszka
Keyword(s):  
Water Vapor ◽  
Rotational Speed ◽  
Corn Starch ◽  
Potato Starch ◽  
Reference Sample ◽  
Film Surface ◽  
Barrier Properties ◽  
Processing Parameters ◽  
Biodegradable Plastics ◽  
Film Blowing

Four different plastics were tested: potato starch based plastic (TPS-P)–BIOPLAST GF 106/02; corn starch based plastic (TPS-C)–BioComp BF 01HP; polylactic acid (polylactide) plastic (PLA)—BioComp BF 7210 and low density polyethylene, trade name Malen E FABS 23-D022; as a petrochemical reference sample. Using the blown film extrusion method and various screw rotational speeds, films were obtained and tested, as a result of which the following were determined: breaking stress, strain at break, static and dynamic friction coefficient of film in longitudinal and transverse direction, puncture resistance and strain at break, color, brightness and gloss of film, surface roughness, barrier properties and microstructure. The biodegradable plastics tested are characterized by comparable or even better mechanical strength than petrochemical polyethylene for the range of film blowing processing parameters used here. The effect of the screw rotational speed on the mechanical characteristics of the films obtained was also demonstrated. With the increase in the screw rotational speed, the decrease of barrier properties was also observed. No correlation between roughness and permeability of gases and water vapor was shown. It was indicated that biodegradable plastics might be competitive for conventional petrochemical materials used in film blowing niche applications where cost, recyclability, optical and water vapor barrier properties are not critical.

Probiotic Greek yogurt: effect of the addition of prebiotic fat substitutes on the physicochemical characteristics, probiotic survival, and sensory acceptance

2021 ◽  
Vol 88 (1) ◽  
pp. 98-104
Author(s):  
Sofia Sestito Dias ◽  
Damarys de Souza Vergílio ◽  
Arthur Marroni Pereira ◽  
Suellen Jensen Klososki ◽  
Vanessa Aparecida Marcolino ◽  
...  
Keyword(s):  
Negative Impact ◽  
Storage Period ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Modified Starch ◽  
Sensory Acceptance ◽  
Ph Values ◽  
Fat Substitutes ◽  
Gastrointestinal Conditions ◽  
The Impact

AbstractIn this research communication we evaluate the impact of the addition of prebiotic components (inulin, polydextrose, and modified starch, 40 g/l) as fat substitutes on the physicochemical characteristics, probiotic survival, and sensory acceptance of probiotic (Lacticaseibacillus casei 01, 108 CFU/ml) Greek yogurts during storage (7 °C, 28 d). All formulations had probiotic counts higher than 107 CFU/ml during storage and simulated gastrointestinal conditions (SGIC). The prebiotic components increased the probiotic survival to the enteric phase of the SGIC, with inulin producing the most pronounced effect. Inulin addition resulted in products with lower pH values and consistency and higher titratable acidity during storage, with negative impact on the sensory acceptance (flavor, texture, and overall impression) at the end of the storage period. Modified starch addition impacted negatively on the acceptance of the products (appearance, flavor, texture, and overall impression). Polydextrose addition resulted in products with lower consistency, but similar sensory acceptance to the full-fat yogurt. It can be concluded that it is possible to prepare potentially synbiotic Greek yogurts by desorption technique using L. casei as probiotic culture and inulin, polydextrose or modified starch as prebiotic components, with the utilization of polydextrose being advisable.

EFFECTS OF ADRENALECTOMY ON REPRODUCTION IN THE MOUSE

1980 ◽  
Vol 86 (1) ◽  
pp. 155-164
Author(s):  
BARBARA M. WHITE ◽  
A. A. GIDLEY-BAIRD ◽  
C. W. EMMENS
Keyword(s):  
Single Injection ◽  
Sesame Seed ◽  
Linear Increase ◽  
Prednisolone Acetate ◽  
Methyl Prednisolone ◽  
Ovariectomized Mice ◽  
Significant Difference ◽  
Sesame Seed Oil ◽  
Pregnant Mice ◽  
Desoxycorticosterone Acetate

Survival of mice treated with sesame seed oil after adrenalectomy was very low and suggested no beneficial effect, whereas treatment with progesterone improved the chances of survival. Treatment with desoxycorticosterone acetate (DOCA) and methyl prednisolone acetate also increased the number of animals surviving after adrenalectomy. The corticosteroids were significantly more effective in ensuring survival than was progesterone. There was no significant difference in survival between mice receiving a single injection of 10 mg DOCA and those being given an injection of 1·0 mg DOCA per day for 3 days after the operation. To ensure minimum interference of exogenous corticosteroid with the experimental investigation, animals routinely received only a single injection of 1·0 mg DOCA after the operation. The chance of survival after adrenalectomy was higher in pregnant than in non-pregnant mice. There was a significant linear increase in survival during the first 5 days of pregnancy. Progesterone and prolactin both appeared to be involved in increasing the chance of survival in adrenalectomized pregnant mice. Adrenalectomy had no effect on the number of mice mating and ovulating. Adrenalectomized mice were apparently having normal cycles and 4 weeks after adrenalectomy they were able to mate and ovulate. Compensatory ovulation was seen in hemi-ovariectomized mice and was not abolished by adrenalectomy. Implantation was also unaffected by the operation.

Effect of the Enzymatic Hydrolysis on Starch Properties

2015 ◽  
Vol 723 ◽  
pp. 701-704
Author(s):  
Jing Li
Keyword(s):  
Tensile Strength ◽  
Enzymatic Hydrolysis ◽  
Corn Starch ◽  
Modified Starch ◽  
Starch Granules ◽  
Compound Structure ◽  
Starch Properties ◽  
Better Than

In this article, corn starch was modified by α-amylase with different hydrolytic time (30, 60, 90 and 120 min) and the effects of modification technology on its properties of viscosity, compound structure and mechanical were studied. The result showed that structure of modified starch was conserved with hydrolytic time increased, whereas tensile strength were increased and viscosity was decreased. The performance of modified starch that hydrolyzed by 30 min was better than others and pinholes were generated in the surface of starch granules

COMPARATIVE EVALUATION OF YOGHURT SAMPLES FROM GOATS AND COWS MILK AND COMMERCIAL RETAIL OUTLET

2021 ◽  
Vol 34 (1) ◽  
Author(s):  
V. A. Obatolu ◽  
E. A. Adebowale ◽  
F. Omidokun ◽  
E. O. Farinde
Keyword(s):  
Goat Milk ◽  
Storage Period ◽  
Total Solid ◽  
Cow Milk ◽  
Microbial Count ◽  
Significant Drop ◽  
Overall Acceptability ◽  
Count Range ◽  
Significant Difference ◽  
Mineral Acidity

This paper compared the chemical (Proximate and mineral), acidity, microbial count and organoleptic properties of yoghurt samples produced from Nigeria locally bred goat and cow milk with commercially retail yoghurt during 14days of refrigerated storage. Yoghurt production was conducted by inoculation of the milk samples at 43oC for 6hrs with 2% of streptococcus thermophillus and lactobacillus bulgarus active culture. The total ash content of yoghurt ranges from 0.23g/100g in the commercial yoghurt sample to 0.84g/100g in yoghurt from goat  milk which is considered significantly higher than that observed for yoghurt from cow milk. The commercially retail yoghurt had a significantly higher (P < 0.05) total solid matter than yoghurt from goat and cow milk. Calcium and phosphorus contents were significantly (P < 0.05) lowest in the commercial yoghurt (0.28%) to a significant higher value of 0.28% in goat milk. A statisitically significant drop in pH values was observed in the commercial yoghurt sample after one and two week storage compared to yoghurt from goat and cow milk. High lactic acid bacteria were observed in yoghurt from cow milk with lactococci group being higher than the lactobacilli group throughout the storage period. The yeast count range from a significant low (P < 05) value of 2.22 cfu/ml-1 in commercial yoghurt sample to 3.22 and 3.24 in goat and cow milk respectively on day zero of storage. By the 7days of storage, the commercially retail yoghurt was significant (P < 0.05) least desirable with respect to colour, taste and overall acceptability while there was no significant difference in the consistency of all the yoghurt samples.

Occurrence of aflatoxin M1 in bovine milk and associated risk factors among dairy farms of Punjab, India

2021 ◽  
pp. 1-10
Author(s):  
H. Thukral ◽  
P. Dhaka ◽  
J. Singh Bedi ◽  
R. Singh Aulakh
Keyword(s):  
Risk Factors ◽  
European Union ◽  
Bovine Milk ◽  
Dairy Farms ◽  
Buffalo Milk ◽  
Cow Milk ◽  
Milk Samples ◽  
Significant Difference ◽  
Associated Risk Factors ◽  
Mean Concentration

Aflatoxin M1 (AFM1) contamination in milk and milk products may pose a major public health concern. The present cross-sectional study was aimed to estimate the prevalence of AFM1 in bovine milk across all districts of Punjab, India and to identify the associated animal and farm level risk factors. A total of 402 milk samples (266 cow milk and 136 buffalo milk) were analysed using commercial ELISA and representative samples were confirmed using HPLC-FLD. The results revealed that 56.2 and 13.4% of the milk samples exceeded the maximum levels of the European Union, i.e. 0.05 μg/l and Food Safety and Standards Authority of India (FSSAI), i.e. 0.5 μg/l for AFM1 in milk, respectively. On analysis of species variation, buffalo milk (prevalence: 56.6%; mean concentration: 0.42±0.9 μg/l) was found to have higher AFM1 levels than cow milk (prevalence: 56.0%; mean concentration: 0.19±0.3 μg/l), with statistically significant difference between mean concentrations (P<0.01) and non-significant difference between AFM1 prevalence (P=0.91). Furthermore, milk from commercial dairy farms (prevalence: 64.7%; mean concentration: 0.34±0.65 μg/l) was found to be more contaminated than from household dairy establishments (prevalence: 47.8%; mean concentration: 0.19±0.65 μg/l). The risk factors ‘above average milk yield/day’ (odds ratio (OR): 2.4) and ‘poor animal hygiene’ (OR: 1.9) were identified at animal level, and ‘intensive dairy farming’ (OR: 3.1) and ‘animal feed without aflatoxin binder’ (OR: 4.7) as farm level risk factors for AFM1 excretion above maximum levels of European Union in milk. Among cow breeds, the milk from ‘non-descript’ breed (OR: 11.5) was found to be most contaminated with AFM1 and the least from Jersey breed (OR: 1.0). The present study highlighted the presence of AFM1 in milk samples; therefore, regular monitoring of AFM1 in milk is required so that high risk regions and associated risk factors can be addressed appropriately.

scholarly journals Modification of Cassava Starch Using Lactic Acid Hydrolysis in The Rotary-UV Dryer to Improve Physichocemical Properties

2018 ◽  
Vol 156 ◽  
pp. 01018 ◽  
Author(s):  
Siswo Sumardiono ◽  
Bakti Jos ◽  
Denny Firmansyah ◽  
Rahmi Hidayatunajah ◽  
Isti Pudjihastuti
Keyword(s):  
Lactic Acid ◽  
Acid Hydrolysis ◽  
Wheat Flour ◽  
Uv Light ◽  
Import Substitution ◽  
Cassava Starch ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Modified Starch ◽  
Significant Difference

Food security should be supported in an effort to utilize local products into import substitution products. Cassava starch has the potential to be developed into semi-finished products in the form of flour or starch which does not contain gluten but can inflate large baking process, potentially as a substitute for wheat flour-the main ingredient for making bread. The characteristic of the starch is influenced by the type of starch composition and structure. Natural starch has physicochemical properties i.e. a long time cooking and pasta formed hard. These constraints allow us to modify cassava starch by a combination of lactic acid hydrolysis and drying with rotary UV system. Modified cassava starch is expected to be used as a substitute for wheat flour. The aim of the research which is a combination of lactic acid hydrolysis and drying using a rotary UV system is to examine the optimum operating conditions in the drying process of starch hydrolysis with parameter the physicochemical and rheological properties of modified cassava starch. The initial process study is to hydrolyze cassava starch using lactic acid. Furthermore, hydrolyzed cassava starch is then dried using UV light in the rotary dryers system. There are a variety of changing variables, i.e. time of irradiation cassava starch-lactic acid hydrolysis products in the rotary UV light and air drying temperature. The research results show that modified starch has a better characteristic than the natural starch. From the analysis, the best point of swelling power, solubility and baking expansion is consequently 15.62 g/g; 24.19 %; 2.21 ml/gr. The FTIR result shows that there is no significant difference of the chemical structure because the starch modification only change the physical characteristics. From the SEM analysis, we can know that the size of the starch’s granule changes between the natural starch and the modified starch..

ATRP Synthesis and Characterization of μ,αω-allyl-terminated Macromonomers as Precursors for End-linked Gels and Hydrogels

2003 ◽  
Vol 774 ◽  
Author(s):  
Lucy Vojtova ◽  
Nicholas J. Turro ◽  
Jeffrey T. Koberstein
Keyword(s):  
Molecular Weight ◽  
Monomer Concentration ◽  
Monomer Conversion ◽  
Catalyst System ◽  
Linear Increase ◽  
Butyl Methacrylate ◽  
First Order Kinetics ◽  
Significant Difference ◽  
Ft Ir

AbstractSynthesis of α,ω-allyl-terminated telechelic macromonomers based on poly(tert-butyl methacrylate) (poly(t-BMA)) and poly(methacrylic acid) (poly(MAA)) was studied with the aim of preparing end-linked gels and hydrogels. Low molecular weight α-allyl-terminated poly(t-BMA) macromonomers with narrow polydispersities (Mw/Mn = 1.16) were synthesized via controlled atom transfer radical polymerization (ATRP) using a Cu(I)Br/N,N,N',N',N',N'-hexamethyltriethylenetetraamine catalyst system in conjunction with an allyl-2-bromoisobutyrate as the functional initiator. The polymerizations exhibited a linear increase of molecular weight in direct proportion to the monomer conversion and first-order kinetics with respect to monomer concentration. No significant difference was found between using polar or non-polar solvents (tetrahydrofuran or benzene, respectively). Optimization of reaction conditions to obtain the highest degree of active terminal bromine is discussed. Quenching the ATRP reaction with allyltributyltin yielded α,ω-allyl-terminated poly(t-BMA) macromonomers by replacing the terminal bromine with ω-allyl functional group. Poly(MAA) macromonomers were prepared by deprotection of the tert-butyl group from α,ω-allyl-terminated poly(t-BMA) macromonomers using concentrated trifluoroacetic acid at room temperature. Successful synthetic steps were confirmed by 1H NMR, FT-IR and MALDI-TOF MS analyses. The α,ω-allyl-terminated macromonomers were proven to be candidates for further polymerization by forming end-linked, non-soluble gels.

Sign in / Sign up

Export Citation Format

Share Document