scholarly journals Possibilities of Dental Titanium Implants Surface Coating With Nano Particles from Nano Silver Solution

2021 ◽  
Vol 7 (9) ◽  
pp. 308-314
Author(s):  
M. Smanaliev ◽  
I. Yuldashev
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Surface Coating ◽  
Titanium Implants ◽  
Nano Particles ◽  
X Ray ◽  
Nano Silver ◽  
Silver Solution ◽  
Titanium Dental Implants ◽  
Scanning Electron

Studied the silver nanoparticles antibacterial action when it coated titanium dental implants. The accumulation of nano-silver on implants surface obtained by scanning electron microscopy and energy dispersive X-ray spectroscopy. The distribution of nano silver is uneven throughout the entire length of the implant. Nano silver is scattered over the surface of the implant with a particle size of up to 5 nM.

Ethylenediamine Processed Cu2SnS3 Nano Particles via Mild Solution Route

2016 ◽  
Vol 19 (1) ◽  
pp. 001-005 ◽  
Author(s):  
Paul Nesamony Prathiba Jeya Helan ◽  
Kannusamy Mohanraj ◽  
Sethuramachandran Thanikaikarasan ◽  
Thaiyan Mahalingam ◽  
Ganesan Sivakumar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Fourier Transform Infrared ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electron Microscopy Analysis ◽  
Microscopy Techniques ◽  
Scanning Electron

Copper tin sulphide nanoparticles have been prepared by solution growth technique at various ethylenediamine concentrations. Prepared samples have been characterized using x-ray diffraction, fourier transform infrared, Raman and scanning electron microscopy techniques. x-ray diffraction results revealed that the prepared samples are nanocrystalline in nature with tetragonal structure. Fourier transform infrared spectroscopy analysis results showed the presence of Cu-O, Sn-O and Sn-S vibrations in the wavenumber range between 450 and 620 cm-1. Vibrational symmetry of prepared samples have been analyzed using Raman spectroscopy. Scanning electron microscopy analysis indicated the formation of flower like nanocrystals for samples prepared at various Ethylenediamine concentrations.

Effects of Anion on the Morphologies of ZnO Synthesized by an Aqueous Solution Method

2011 ◽  
Vol 284-286 ◽  
pp. 781-785 ◽  
Author(s):  
Shi Cai Cui ◽  
Da Feng Zhang ◽  
Xi Peng Pu ◽  
Xian Hua Qian ◽  
Tian Tian Ge ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Scanning Electron Microscopy ◽  
Zinc Sulfate ◽  
Solution Method ◽  
Nano Particles ◽  
X Ray ◽  
Zinc Salts ◽  
Aqueous Solution Method ◽  
Scanning Electron

ZnO were rapidly synthesized using different zinc salts (Zn(NO3)2, Zn(CH3CO2)2, ZnCl2and ZnSO4) by an aqueous solution method at 90°C. The products were characterized by X-ray diffractometry and scanning electron microscopy. The results show that the anions have remarkable effects on the morphologies of ZnO. When Zn(NO3)2, Zn(CH3CO2)2or ZnCl2was used, ZnO was obtained with ellipsoidal, under-developed ellipsoidal and nano-particles morphologies, respectively. In the case of ZnSO4, layered basic zinc sulfate was obtained. The remarkable effects of anions on ZnO can be ascribed to the adsorption of the anions on the surface of ZnO, which hinders the further growth of ZnO nuclei. The effect of SO42-was further investigated by changing the mole ratio of SO42-to NO3-.

scholarly journals Estimation of Lattice Strain in Lanthanum Hexa Aluminate Nanoparticles Using X-Ray Peak Profile Analysis

2021 ◽  
Vol 31 (1) ◽  
pp. 13-19
Author(s):  
Naga Venkata Sai Ram Yellapragada ◽  
Tara Sasanka Cherukuri ◽  
Prabakaran Jayaraman ◽  
Sameer Kumar Devarakonda
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Crystallite Size ◽  
Profile Analysis ◽  
Xrd Analysis ◽  
Nano Particles ◽  
X Ray ◽  
Peak Broadening ◽  
Average Grain Size ◽  
Scanning Electron

This work confers to the preparation of Lanthanum Hexa Aluminate (LHA) nanoparticles by chemical precipitation and filtration technique followed by characterization studies conducted through X-ray peak profile analysis (XPPA) and Field Emission Scanning Electron Microscopy (FESEM) supported by Energy Dispersive Spectroscopy (EDS). From the X-ray diffraction (XRD) analysis, it has been observed that the prepared powder has hexagonal crystal structure. Further, Scherrer Method (S-M), modified Williamson–Hall (W-H), and Size–Strain Plot (SSP) methods have been implemented to all LHA reflection peaks for the comprehensive crystalline analysis. The influence of crystallite size, stress, strain, and energy density values on the peak broadening of LHA nanoparticles has been critically examined and discussed in the current work. In addition to regular mathematical models this paper also provides an insight into the calculation of Youngs modulus without tedious experimental procedure. The predicted crystallite size estimated from Scherrer’s formula, and W-H models are correlated to scanning electron microscopy results and observed that the average grain size of LHA nano particles estimated from SEM analysis, and models have less deviation in the present study.

Structural and Optical Properties of ZnO Nano Particles Synthesised by Mixture of Fuel Approach in Solution Chemical Combustion

2012 ◽  
Vol 629 ◽  
pp. 273-278
Author(s):  
Rameshwar Rao ◽  
V. Rajendar ◽  
K. Venkateswara Rao
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Nano Particles ◽  
Energy Dispersive ◽  
Spontaneous Ignition ◽  
Visible Absorption ◽  
X Ray ◽  
Morphological Studies ◽  
Zno Nanopowder ◽  
Scanning Electron

Zinc oxide has been used for many applications, for example optoelectronic devices, ceramics, catalysts, pigments, varistors and many other important applications. In this study, ZnO nanoparticles were synthesized by mixture of fuel approach in solution chemical combustion method. Mixtures of Urea and Zinc salts were mixed at room temperature resulting in spontaneous ignition because these are hypergolic materials resulting in production of ZnO nanopowder. The crystal structure and size of the synthesized powder were determined by X- ray diffractometer (XRD), which revealed that the synthesized ZnO nanopowder has the pure wurtzite structure having average crystallite size of 30nm. Morphological studies were carried out by scanning electron microscopy (SEM), Energy Dispersive X-ray analysis (EDAX) was carried out by Scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDAX), Optical studies were examined by FT-IR and UV-Visible absorption spectrum and the particle size was estimated from Nanoparticle size analyzer.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Scanning Electron Microscopy and X-Ray Analyses of Dental Tissues from a Hibernator

1976 ◽  
Vol 34 ◽  
pp. 178-179
Author(s):  
M. L. Zimny ◽  
A. C. Haller
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Body Temperature ◽  
Ground Squirrel ◽  
Alveolar Bone ◽  
X Ray ◽  
Dental Tissues ◽  
Bone Minerals ◽  
Apical Tooth ◽  
Scanning Electron

During hibernation the ground squirrel is immobile, body temperature reduced and metabolism depressed. Hibernation has been shown to affect dental tissues varying degrees, although not much work has been done in this area. In limited studies, it has been shown that hibernation results in (1) mobilization of bone minerals; (2) deficient dentinogenesis and degeneration of alveolar bone; (3) presence of calculus and tears in the cementum; and (4) aggrevation of caries and pulpal and apical tooth abscesses. The purpose of this investigation was to study the effects of hibernation on dental tissues employing scanning electron microscopy (SEM) and related x-ray analyses.

Scanning Electron Microscopy and x-ray analysis of microparticles and early hydration effects

1995 ◽  
Vol 53 ◽  
pp. 692-693
Author(s):  
Yun Lu ◽  
David C. Joy
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Resolution ◽  
Morphological Development ◽  
Early Hydration ◽  
X Ray ◽  
Blended Cements ◽  
Powder Particles ◽  
Chemical Wastes ◽  
Scanning Electron

High resolution scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA) were performed to investigate microparticles in blended cements and their hydration products containing sodium-rich chemical wastes. The physical appearance of powder particles and the morphological development at different hydration stages were characterized by using high resolution SEM Hitachi S-900 and by SEM S-800 with a EDX spectrometer. Microparticles were dispersed on the sample holder and glued by 1% palomino solution. Hydrated bulk samples were dehydrated by acetone and mounted on the holder by silver paste. Both fracture surfaces and flat cutting sections of hydrating samples were prepared and examined. Some specimens were coated with an 3 nm thick Au-Pd or Cr layer to provide good conducting surfaces. For high resolution SEM S-900 observations the accelerating voltage of electrons was 1-2 KeV to protect the electron charging. Microchemical analyses were carried out by S800/EDS equipped with a LINK detector of take-off angle =40°.

Defects of Platelet Function Recognized by X-Ray Imaging and Scanning Electron Microscopy

1985 ◽  
Vol 43 ◽  
pp. 610-613
Author(s):  
M.G. Baldini ◽  
S. Morinaga ◽  
D. Minasian ◽  
R. Feder ◽  
D. Sayre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Biology ◽  
Imaging Technique ◽  
Human Platelets ◽  
X Rays ◽  
X Ray ◽  
X Ray Imaging ◽  
Complex Phenomena ◽  
Scanning Electron

Contact X-ray imaging is presently developing as an important imaging technique in cell biology. Our recent studies on human platelets have demonstrated that the cytoskeleton of these cells contains photondense structures which can preferentially be imaged by soft X-ray imaging. Our present research has dealt with platelet activation, i.e., the complex phenomena which precede platelet appregation and are associated with profound changes in platelet cytoskeleton. Human platelets suspended in plasma were used. Whole cell mounts were fixed and dehydrated, then exposed to a stationary source of soft X-rays as previously described. Developed replicas and respective grids were studied by scanning electron microscopy (SEM).

Environmental scanning electron microscopy of fresh human gallstones reveals new morphologies of precipitated calcium salts

1992 ◽  
Vol 50 (2) ◽  
pp. 1322-1323
Author(s):  
Howard S. Kaufman ◽  
Keith D. Lillemoe ◽  
John T. Mastovich ◽  
Henry A. Pitt
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Environmental Scanning Electron Microscopy ◽  
Environmental Scanning ◽  
X Ray Diffraction ◽  
Calcium Salts ◽  
Cholesterol Gallstones ◽  
X Ray ◽  
Ca Carbonate ◽  
Scanning Electron

Gallstones contain precipitated cholesterol, calcium salts, and proteins. Calcium (Ca) bilirubinate, palmitate, phosphate, and carbonate occurring in gallstones have variable morphologies but characteristic windowless energy dispersive x-ray (EDX) spectra. Previous studies of gallstone microstructure and composition using scanning electron microscopy (SEM) with EDX have been limited to dehydrated samples. In this state, Ca bilirubinates appear as either glassy masses, which predominate in black pigment stones, or as clusters, which are found mostly in cholesterol gallstones. The three polymorphs of Ca carbonate, calcite, vaterite, and aragonite, have been identified in gallstones by x-ray diffraction, however; the morphologies of these crystals vary in the literature. The purpose of this experiment was to study fresh gallstones by environmental SEM (ESEM) to determine if dehydration affects gallstone Ca salt morphology.Gallstones and bile were obtained fresh at cholecystectomy from 6 patients. To prevent dehydration, stones were stored in bile at 37°C. All samples were studied within 4 days of procurement.

Sign in / Sign up

Export Citation Format

Share Document