Mechanical Properties and Bio-Corrosion Properties of CaO added ZM21 alloys as Biodegradable Materials

2014 ◽  
Vol 52 (11) ◽  
pp. 949-956
Author(s):  
Hyunkyu Lim ◽  
Wonseok Yang ◽  
Young-Gil Jung ◽  
Shae K. Kim ◽  
Do-Hyang Kim
Keyword(s):  
Mechanical Properties ◽  
Biodegradable Materials ◽  
Corrosion Properties

Possibilities of using biodegradable polymeric materials in the agricultural sector

2020 ◽  
Vol 67 (2) ◽  
pp. 115-120
Author(s):  
Raisa A. Alekhina ◽  
Victoriya E. Slavkina ◽  
Yuliya A. Lopatina
Keyword(s):  
Mechanical Properties ◽  
Biodegradable Polymers ◽  
Biodegradable Polymer ◽  
Agricultural Sector ◽  
Polymeric Materials ◽  
Polymer Materials ◽  
Limiting Factors ◽  
Research Purpose ◽  
Biodegradable Materials ◽  
Advantages And Disadvantages

The article presents options for recycling polymers. The use of biodegradable materials is promising. This is a special class of polymers that can decompose under aerobic or anaerobic conditions under the action of microorganisms or enzymes forming natural products such as carbon dioxide, nitrogen, water, biomass, and inorganic salts. (Research purpose) The research purpose is in reviewing biodegradable materials that can be used for the manufacture of products used in agriculture. (Materials and methods) The study are based on open information sources containing information about biodegradable materials. Research methods are collecting, studying and comparative analysis of information. (Results and discussion) The article presents the advantages and disadvantages of biodegradable materials, mechanical properties of the main groups of biodegradable polymers. The article provides a summary list of agricultural products that can be made from biodegradable polymer materials. It was found that products from the general group are widely used in agriculture. Authors have found that products from a special group can only be made from biodegradable polymers with a controlled decomposition period in the soil, their use contributes to increasing the productivity of crops. (Conclusions) It was found that biodegradable polymer materials, along with environmental safety, have mechanical properties that allow them producing products that do not carry significant loads during operation. We have shown that the creation of responsible products (machine parts) from biodegradable polymers requires an increase in their strength properties, which is achievable by creating composites based on them. It was found that the technological complexity of their manufacture and high cost are the limiting factors for the widespread use of biodegradable polymers at this stage.

scholarly journals Biological Applications of Severely Plastically Deformed Nano-Grained Medical Devices: A Review

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 748
Author(s):  
Katayoon Kalantari ◽  
Bahram Saleh ◽  
Thomas J. Webster
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Bacterial Colonization ◽  
Antibiotic Use ◽  
Bone Cell ◽  
Corrosion Properties ◽  
Biomedical Implant ◽  
Specific Strength ◽  
Biological Functionality ◽  
Bone Cell Proliferation

Metallic materials are widely used for fabricating medical implants due to their high specific strength, biocompatibility, good corrosion properties, and fatigue resistance. Recently, titanium (Ti) and its alloys, as well as stainless steel (SS), have attracted attention from researchers because of their biocompatibility properties within the human body; however, improvements in mechanical properties while keeping other beneficial properties unchanged are still required. Severe plastic deformation (SPD) is a unique process for fabricating an ultra-fine-grained (UFG) metal with micrometer- to nanometer-level grain structures. SPD methods can substantially refine grain size and represent a promising strategy for improving biological functionality and mechanical properties. This present review paper provides an overview of different SPD techniques developed to create nano-/ultra-fine-grain-structured Ti and stainless steel for improved biomedical implant applications. Furthermore, studies will be covered that have used SPD techniques to improve bone cell proliferation and function while decreasing bacterial colonization when cultured on such nano-grained metals (without resorting to antibiotic use).

scholarly journals Development of Al–Mg–Si alloy performance by addition of grain refiner Al–5Ti–1B alloy

2021 ◽  
Vol 104 (2) ◽  
pp. 003685042110294
Author(s):  
Khaled Abd El-Aziz ◽  
Emad M Ahmed ◽  
Abdulaziz H Alghtani ◽  
Bassem F Felemban ◽  
Hafiz T Ali ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Corrosion Resistance ◽  
Testing Machine ◽  
Dendritic Structure ◽  
Grain Refiner ◽  
Corrosion Properties ◽  
Average Grain Size ◽  
Structural Applications ◽  
Alloy Addition

Aluminum alloys are the most essential part of all shaped castings manufactured, mainly in the automotive, food industry, and structural applications. There is little consensus as to the precise relationship between grain size after grain refinement and corrosion resistance; conflicting conclusions have been published showing that reduced grain size can decrease or increase corrosion resistance. The effect of Al–5Ti–1B grain refiner (GR alloy) with different percentages on the mechanical properties and corrosion behavior of Aluminum-magnesium-silicon alloy (Al–Mg–Si) was studied. The average grain size is determined according to the E112ASTM standard. The compressive test specimens were made as per ASTM: E8/E8M-16 standard to get their compressive properties. The bulk hardness using Vickers hardness testing machine at a load of 50 g. Electrochemical corrosion tests were carried out in 3.5 % NaCl solution using Autolab Potentiostat/Galvanostat (PGSTAT 30).The grain size of the Al–Mg–Si alloy was reduced from 82 to 46 µm by the addition of GR alloy. The morphology of α-Al dendrites changes from coarse dendritic structure to fine equiaxed grains due to the addition of GR alloy and segregation of Ti, which controls the growth of primary α-Al. In addition, the mechanical properties of the Al–Mg–Si alloy were improved by GR alloy addition. GR alloy addition to Al–Mg–Si alloy produced fine-grained structure and better hardness and compressive strength. The addition of GR alloy did not reveal any marked improvements in the corrosion properties of Al–Mg–Si alloy.

Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61

2020 ◽  
Vol 62 (4) ◽  
pp. 395-399
Author(s):  
Jiehui Liu ◽  
Hongjun Hu ◽  
Yang Liu ◽  
Dingfei Zhang ◽  
Zhongwen Ou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Magnesium Alloy ◽  
Equal Channel Angular Extrusion ◽  
Extrusion Process ◽  
Corrosion And Wear ◽  
Nacl Solution ◽  
Corrosion Properties ◽  
Manufacturing Method ◽  
Az61 Magnesium Alloy

Abstract Compound extrusion (CE) is a newly developed plastic deformation technique which combines direct extrusion (DE) with a two-pass equal channel angular extrusion (ECAE). This paper focuses on the strength, ductility and anti-corrosion properties of an NaCl solution at certain concentrations and the wear-resistance of dry sliding AZ61 magnesium alloy prepared by CE and DE. It is found that the strength and elongation of the AZ61 alloy prepared by CE are enhanced because of grain refinement. Furthermore, AZ61 magnesium alloy made by CE displays higher corrosion and wear resistance than that prepared by DE. Experimental results prove that CE is a prospective manufacturing method for improving the mechanical properties, anti-corrosion and anti-wear of AZ61 magnesium alloy.

Characteristics of the Al-Brasses Affected Corrosion Properties

2016 ◽  
Vol 844 ◽  
pp. 38-45 ◽  
Author(s):  
Tatiana Liptáková ◽  
Martin Lovíšek ◽  
Branislav Hadzima
Keyword(s):  
Mechanical Properties ◽  
Chemical Composition ◽  
Research Work ◽  
Construction Materials ◽  
Experimental Methods ◽  
Energy Industry ◽  
Corrosion Properties ◽  
Corrosion Resistant ◽  
Operation Conditions ◽  
Similar Chemical

The Al-brasses are considered corrosion resistant construction materials often used to pipe systems in energy industry, where they are exposed to flowing liquids environments. In that system the brasses are loaded chemically and mechanically. The aim of our research work is to compare corrosion properties of four Al-brasses produced by different manufactures because in operation conditions they have dissimilar reliability and durability. The examined Al-brasses have similar chemical composition but differ in microstructure, surface state what affects their corrosion and mechanical properties. The effect of the mentioned parameters on corrosion and mechanical susceptibility to degradation are investigated by chosen experimental methods.

Effect of CeCl3-Containing Flux on Microstructure and Mechanical Properties of Mg Alloy Containing Rare Earth

2007 ◽  
Vol 546-549 ◽  
pp. 563-566
Author(s):  
Wen Jiang Ding ◽  
Guo Hua Wu ◽  
Bong Sun You ◽  
Dong Yim Chang
Keyword(s):  
Mechanical Properties ◽  
Rare Earth ◽  
High Temperature ◽  
Magnesium Alloy ◽  
Loss Rate ◽  
Alloy Element ◽  
Corrosion Properties ◽  
High Temperature Mechanical Properties ◽  
Β Phase ◽  
Element Loss

The effects of CeCl3-containing fluxes on RE element loss, the high temperature mechanical properties, microstructure and corrosion properties of magnesium alloy containing RE have been studied. The results showed that a certain amount of CeCl3 in purification fluxes restrained the reaction between the Ce element and fluxes to decrease the loss of Ce in alloys. With the flux containing 9% CeCl3, the loss rate of alloy element Ce can be reduced from 26.9% to 3.4%, and the σb and δ of the alloys at 150°C counld be improved from 160.9MPa and 6.2% to 176.5MPa and 7.9% compared with that of conventional MgCl2-containing flux , respectively. Besides, the coarse β phase and rod-like RE phase were refined effectively by CeCl3-containing fluxes.

Experimental investigation and empirical modeling for corrosion rate prediction of biodegradable zinc based composite considering the effect of constituent materials

2021 ◽  
pp. 095440622110556
Author(s):  
Dayanidhi Krishana Pathak ◽  
Pulak Mohan Pandey
Keyword(s):  
Mechanical Properties ◽  
Corrosion Rate ◽  
Biomedical Applications ◽  
Microwave Sintering ◽  
Research Work ◽  
Simulated Body Fluid Solution ◽  
Corrosion Current ◽  
Essential Elements ◽  
Empirical Modeling ◽  
Corrosion Properties

Biodegradable zinc (Zn) has shown great potential in the area of biomedical applications. Though, the mechanical properties are decisive for the use of Zn for orthopedic and cardiovascular applications. Consequently, one needs to focus on improving the mechanical properties of Zn for its suitability in biomedical applications. Alloying of essential elements of the human body resulted in enhancement of Zn’s mechanical properties in recent years. The corrosion rate of pure Zn is ideal; however, the addition of other elements has resulted in a loss of its ideal corrosion rate. The inclusion of hydroxyapatite (HA) and iron (Fe) in Zn has also been reported in improving the mechanical properties. Hence, a need is raised for the development of a model which can predict the corrosion rate after adding HA along with Fe in Zn. In this research work, empirical based modeling is proposed to predict the corrosion rate, which incorporates the outcome of addition of Fe and HA in Zn. The Zn based materials were fabricated with the help of microwave sintering for developing the empirical model. The corrosion properties of the materials were assessed through a potentiodynamic polarization test in a simulated body fluid solution. The enhanced corrosion rate was attained with the rise in HA (wt%) and Fe (wt%) in Zn. An empirical correlation was established between the influencing controlling parameters (i.e., corrosion current, equivalent weight, and material density) of corrosion rate. Confirmation experiments were conducted to validate the developed model, and the highest error of 6.12% was obtained between the experimental and predicted values exhibiting the efficaciousness of the proposed model.

Corrosion characterization of Sn-Zn solder: a review

2019 ◽  
Vol 31 (1) ◽  
pp. 52-67 ◽  
Author(s):  
Muhammad Firdaus Mohd Nazeri ◽  
Muhamad Zamri Yahaya ◽  
Ali Gursel ◽  
Fakhrozi Cheani ◽  
Mohamad Najmi Masri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Potentiodynamic Polarization ◽  
Electrochemical Impedance ◽  
Alloy System ◽  
Future Research ◽  
Corrosion Properties ◽  
Content Type ◽  
Characterization Techniques ◽  
Recent Developments ◽  
Potentiostatic Polarization

PurposeThe purpose of this paper is to review and examine three of the most common corrosion characterization techniques specifically on Sn-Zn solders. The discussion will highlight the configurations and recent developments on each of the compiled characterization techniques of potentiodynamic polarization, potentiostatic polarization and electrochemical impedance spectroscopy (EIS).Design/methodology/approachThe approach will incorporate a literature review of previous works related to the experimental setups and common parameters.FindingsThe potentiostatic polarization, potentiodynamic polarization and EIS were found to provide crucial and vital information on the corrosion properties of Sn-Zn solders. Accordingly, this solder relies heavily on the amount of Zn available because of the inability to produce the intermetallic compound in between the elements. Further, the excellent mechanical properties and low melting temperature of the Sn-Zn solder is undeniable, however, the limitations regarding corrosion resistance present opportunities in furthering research in this field to identify improvements. This is to ensure that the corrosion performance can be aligned with the outstanding mechanical properties. The review also identified and summarized the advantages, recent trends and important findings in this field.Originality/valueThe unique challenges and future research directions regarding corrosion measurement in Sn-Zn solders were shown to highlight the rarely discussed risks and problems in the reliability of lead-free soldering. Many prior reviews have been undertaken of the Sn-Zn system, but limited studies have investigated the corrosive properties. Therefore, this review focuses on the corrosive characterizations of the Sn-Zn alloy system.

Sign in / Sign up

Export Citation Format

Share Document