scholarly journals Billing Management System Design for Cellular Phone Network Practicum Module 2.4 Ghz WiFi Transmission

2018 ◽  
Vol 6 (1) ◽  
pp. 17-22
Author(s):  
Anky Ismas Sasongko
Keyword(s):  
System Design ◽  
Research Method ◽  
Cellular Phone ◽  
Initial Pulse ◽  
Billing System ◽  
Program Calculation ◽  
Billing Management ◽  
The Cost ◽  
Manual Calculation

This study aims to design and build a VoIP billing server that is used for calculating the cost of telephone conversations and designing a VoIP practicum module for students.The research method was carried out by conducting literature studies, network design planning, device configuration, determination of billing parameters and VoIP call testing to determine call quality and VoIP billing function.The result of this thesis is a telephone billing system application that is used to calculate VoIP-based telephone costs and the softphone application as a telecommunications medium. Where the billing server is well configured with the softphone application, the softphone application uses the simcard as data verification provided by the admin. The results of testing the success of telephone charges when 2 clients make calls with an initial pulse of 100 Rupiah, the result is a calculation of 100% between manual calculations and program calculations. And when the test was carried out, making calls more than 2 clients produced different data between manual and program calculations with an average of 101.75, the program calculation was on manual calculation of 100.The results of this difference were only for the first and second callers, the next caller had the results which is the same as manual calculation.

Approximate Determination of Basic Data for Twin-Hoist Motor A.C. Electric Overhead Travelling Grabbing Cranes

1968 ◽  
Vol 183 (1) ◽  
pp. 353-364
Author(s):  
B. V. Morgan
Keyword(s):  
System Design ◽  
Power Supply ◽  
Approximate Determination ◽  
Empirical Equations ◽  
Bulk Materials ◽  
Total Cost ◽  
Materials Handling ◽  
Supply Costs ◽  
The Cost

In system design of a bulk materials handling plant it is essential, in the early stages, to be able to quickly assess the effects of various layouts and designs. A plant using a twin-hoist motor a.c. electric overhead travelling (e.o.t.) grabbing crane would require the study of various plant layouts. For any particular layout under investigation the total cost will be a combination of crane costs, civil and structural costs and power supply costs which are all interrelated. Use of the graphs and empirical equations contained in this paper will enable the appropriate crane data to be approximately determined such as crane cost, wheel loads and power consumption. The establishment of these facts will enable the plant layout engineer to determine the cost of the civil, structural and electrical sectors and hence the overall costs.

Mekanisme Dan Proteksi Jaminan Nasabah Pada Gadai Informal

Liquidity ◽  
2017 ◽  
Vol 6 (2) ◽  
pp. 103-109
Author(s):  
Yuri Nanda Larasati ◽  
Jafril Khalil
Keyword(s):  
Qualitative Research ◽  
Research Methods ◽  
Financial Services ◽  
Field Data ◽  
Qualitative Research Methods ◽  
Research Field ◽  
Consumer Society ◽  
Library Research ◽  
The Cost

Regulation of the financial services authority (OJK) No. 31/POJK.05/2016 on Venture had arranged that the financial services agency on the basis of the law of pledge is in coaching and supervision OJK. Yet the existence of laws – invitation to Governing Enterprise pawn shops causing business activities conducted by the above parties are not yet regulated. The condition is feared could cause harm to the consumer society. The purpose of this research is to know the procedures, mechanisms, protection of goods and guarantee the consumer on an informal pledge financing, methods of determination of the cost of maintenance of the goods and the goods of the execution mechanism of the pledge as well as protection for the collateral items are viewed from the side of the consumer by looking at laws-invitations and Sharia. To find out whether the pledge have gotten permission from OJK. This research uses qualitative research methods with the study of library research, field data and simulations. The approach used in this study is the empirical juridical approach. Elaboration upon the results is discussed further in this article.

The Awareness Level of the Safety and Health of the Operational Level

2017 ◽  
Vol 3 (1) ◽  
pp. 42
Author(s):  
Roshanira Che Mohd Noor ◽  
Nur Atiqah Rochin Demong
Keyword(s):  
Health And Safety ◽  
Health Conditions ◽  
Effective Strategies ◽  
Operational Level ◽  
Safety And Health ◽  
Health Factors ◽  
The Cost ◽  
The Relationship ◽  
Awareness Level

Providing a safe and healthy workplace is one of the most effective strategies in for holding down the cost of doing construction business. It was a part of the overall management system to facilitate themanagement of the occupational health and safety risk that are associated with the business of the organization. Factors affected the awareness level inclusive of safety and health conditions, dangerous working area, long wait care and services and lack of emergency communication werethe contributed factors to the awareness level for the operational level. Total of 122 incidents happened at Telekom Malaysia Berhad as compared to year 2015 only 86 cases. Thus, the main objective of this study was to determine the relationship between safety and health factors and the awareness level among operational workers.The determination of this research was to increase the awareness level among the operational level workerswho committing to safety and health environment.

LEGAL ISSUES REGARDING IMPOSITION OF E-FORM D AS A BASIS FOR DETERMINATION OF PREFERENTIAL TARIFFS IN ATIGA

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Aditya Subur Purwana ◽  
Wahyu Hidayat ◽  
Mursal Maulana
Keyword(s):  
Research Method ◽  
Descriptive Analysis ◽  
Legal Issues ◽  
Legal Certainty ◽  
Layer System ◽  
Legal Provisions ◽  
Directorate General ◽  
Domestic Law

Submission of Certificate of Origin (e-Form D) is conducted through a three-layer system named ASW Gateway, LNSW, and CEISA has raised issues related to the period/time of receipt of e-Form D given by customs authorities for the purposes of charging preferential tariffs in the ATIGA scheme. This article aims to analyze the legal certainty in submitting e-Form D to the customs authorities in the importing country, in this case, the Directorate General of Customs and Excise for the purpose of charging preferential tariffs, so that it can be in line with the presentation principle based on the ATIGA OCP and Indonesian domestic legal provisions. The research method used is a normative juridical approach with descriptive analysis and normative qualitative to draw conclusions. Based on the research, it was concluded that with regard to the submission of e-Form D, Customs and Excise Officials must have confidence based on factual evidence to determine whether the principle of submission of e-Form D has been accomplished or refused when an interruption in the ASW Gateway, LNSW or CEISA happened so the Customs Officer and Excise can determine tariffs based on OCP as well as domestic law in force in Indonesia.Keywords: ATIGA, Customs Authority, Directorate General of Customs and Excise, e-Form D, Tariffs Preference.ABSTRAK: Penyerahan SKA e-Form D dilakukan melalui tiga layer system yakni ASW Gateway, LNSW, dan CEISA memunculkan permasalahan terkait dengan jangka waktu/saat diterimanya e-Form D oleh otoritas kepabeanan untuk kepentingan pengenaan tarif preferensi dalam skema ATIGA. Penelitian bertujuan menganalisis kepastian hukum dalam penyerahan e-Form D ke otoritas kepabeanan di negara importir, dalam hal ini Direktorat Jenderal Bea dan Cukai untuk kepentingan pengenaan tarif preferensi, sehingga dapat sejalan dengan prinsip presentasi berdasarkan OCP ATIGA dan ketentuan hukum domestik Indonesia. Metode penelitian dilakukan dengan pendekatan yuridis normatif secara deskriptif analisis dan penarikan kesimpulan secara normatif kualitatif. Berdasarkan penelitian, disimpulkan bahwa berkenaan dengan penyerahan e-Form D, Pejabat Bea dan Cukai harus memiliki keyakinan berdasarkan bukti faktual untuk menentukan apakah prinsip penyerahan e-Form D sudah dipenuhi/tidak ketika terjadi gangguan pada ASW Gateway, LNSW atau CEISA sehingga Pejabat Bea dan Cukai dapat menentukan tarif berdasarkan OCP maupun hukum domestik yang berlaku di Indonesia. Kata Kunci: ATIGA, Direktorat Jenderal Bea dan Cukai, e-Form D, Otoritas Kepabeanan, Tarif Preferensi. 

PROFITABILITY ANALYSIS OF TERUBUK FARMING (SACCHARUM EDULE HASSKARL) IN SUBDISTRICT TOSA DISTRICT OF EAST TIDORE OF TIDORE ISLAND

2018 ◽  
Author(s):  
Suwandi S. Sangadji
Keyword(s):  
Data Collection ◽  
Research Method ◽  
Quantitative Method ◽  
Secondary Data ◽  
Primary Data ◽  
Profitability Analysis ◽  
Sample Method ◽  
Document Review ◽  
Revenue Production

The purpose of this researchment is to ascertain how wide the farming of species Saccharun Edule Hasskarl (terubuk) in sub district Tosa, district of East Tidore of Tidore Island through the indicator of the value revenue, production and selling prices so that the farmers will achieve The Break Event Point (BEP). The research method was used a quantitative method with the number of samples of 30 people. The determination of the sample method is using the census method or involving all members of the population into a sample of researchment. The secondary data collection was done by using library literature in the form of document review and relevant references to research object while primary data collection was done by using questionnaire. The data is using equation R /C Ratio, BEP Revenue, BEP Price, and BEP Production. Therefore from the results of the researchment it can be explained that the two of the thirty farmers come through the break event point, while the other twenty-eight farmers declared having a business that worth to be develop or experiencing profit, because the R/C ratio is above 1.0 with average profit reach Rp. 989.000, - per production / farmer.

Is it worth doing fieldwork with this organisation? A method for considering context before conducting fieldwork research in Sport for development and peace.

2020 ◽  
Author(s):  
Tegwen Gadais ◽  
Laurie Décarpentrie ◽  
Andrew Webb ◽  
Marie Belle Ayoub ◽  
Mariann Bardocz-Bencsik ◽  
...  
Keyword(s):  
Sustainable Development ◽  
Research Method ◽  
Sustainable Development Goals ◽  
Field Work ◽  
Limited Resources ◽  
Limited Time ◽  
Sport For Development ◽  
Development Goals ◽  
The Cost ◽  
Existing Data

Much has been written about sport as a tool for development and peace. But more research on Sport for Development and Peace (SDP) organizations, is needed to better understand their actual contributions to the UNs sustainable development goals. Yet, the unstable, risky, and restricted contexts in which many NGOs and SDP agencies operate often leaves researchers struggling to find effective yet feasible methods through which to examine agencies in these fields. Indeed, conducting field work on and with SDP agency often implies allocating significant quantities of researcher’s limited time, funding, and other vital resources. And as limited resources need to be invested wisely, SDP researchers will clearly need to prepare their fieldwork. Nevertheless, there are but a handful of methodological papers that address the question of how to prepare for SDP field work. In other words, the question of how we know if it is worthwhile, and safe enough, to proceed with SDP field work remains. Building on previous research, the purpose of this study is to raise important ontological and epistemological questions about what can be known about a given context, before setting off on fieldwork. We further explore the use of the Actantial Model as a research method for analyzing existing data before deciding whether to conduct fieldwork in complex and frequently insecure situations. In other words, will the cost (material, temporal, financial, and physical) of conducting fieldwork be worth it? By applying the Actantial Model, with the specific aim of informing decisions regarding subsequent fieldwork, to one specific case, contributions regarding the pertinence of conducting fieldwork are provided.

ANALISIS PERHITUNGAN HARGA POKOK PRODUKSI DAN PENENTUAN HARGA JUAL ATAS PRODUK (Studi Kasus Pada PT Dasa Windu Agung)

2016 ◽  
Vol 1 (2) ◽  
pp. 183-190
Author(s):  
Dwi Urip Wardoyo
Keyword(s):  
Manufacturing Industry ◽  
Sampling Method ◽  
Manufacturing Companies ◽  
Test Analysis ◽  
Automotive Components ◽  
Convenience Sampling ◽  
Cost Of Production ◽  
The Cost ◽  
Keywords Cost

This study aims to determine the determination of the cost of production for products produced by PT. DWA. The Company is engaged in the manufacturing industry specialized in automotive components. Its activity is carried out through a series of production processes, so that expenses spent in the production will be calculated into the cost of the production sold. The population in this study were all manufacturing companies in Jakarta. Convenience sampling method selected one of the companies that get the confidence to assemble three national car project in Indonesia, namely Timor, Bakrie and Maleo. Test analysis used in this study is to test the calculation of full costing with job order costing. This study shows that (a) determination of the cost elements associated with the cost of production and (b) determining the cost of production on a product-based job costing with full costing approach. Keywords: cost of production, full costing

Determination of the minimum number of technological bases of a part

2020 ◽  
pp. 73-75
Author(s):  
B.M. Bazrov ◽  
T.M. Gaynutdinov
Keyword(s):  
Cost Price ◽  
Labor Input ◽  
Part Surface ◽  
Technological Base ◽  
Size Accuracy ◽  
Minimum Number ◽  
The Cost ◽  
Input Cost ◽  
Selection Of

The selection of technological bases is considered before the choice of the type of billet and the development of the route of the technological process. A technique is proposed for selecting the minimum number of sets of technological bases according to the criterion of equality in the cost price of manufacturing the part according to the principle of unity and combination of bases at this stage. Keywords: part, surface, coordinating size, accuracy, design and technological base, labor input, cost price. [email protected]

Sign in / Sign up

Export Citation Format

Share Document