scholarly journals Characterization of Physical, Thermal and Spectroscopic Properties of Biofield Treated Ortho-Toluic Acid

2016 ◽  
pp. 21-28
Author(s):  
Mahendra Kumar Trivedi ◽  
Alice Branton ◽  
Dahryn Trivedi ◽  
Gopal Nayak ◽  
Ragini Singh ◽  
...  

Toluic acid isomers are widely used as a chemical intermediate in manufacturing of dyes, pharmaceuticals, polymer stabilizers, insect repellent and other organic synthesis. The aim of present study was to evaluate the impact of biofield treatment on physical, thermal and spectroscopic properties of ortho isomer of toluic acid (OTA). The OTA sample was divided into two groups, served as control and treated. The treated group received Mr. Trivedi’s biofield treatment. Subsequently, the control and treated samples were evaluated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis/ derivative thermogravimetry (TGA/DTG), Fourier transform infrared (FT-IR) and ultraviolet-visible (UV-Vis) spectroscopy. XRD result showed 26.66% decrease in crystallite size in treated OTA sample as compared to control. Furthermore, DSC analysis result showed that latent heat of fusion was considerably reduced by 6.68% in treated OTA sample as compared to control. However, an increase in melting point was observed in treated sample. The melting point of treated OTA sample was found to be 107.96°C as compared to control (105.47°C) sample. Moreover, TGA/ DTG studies showed that Tmax (temperature, at which sample lost its maximum weight) was decreased by 1.21% in treated OTA sample as compared to control. It indicates that vaporisation of treated OTA sample might increase as compared to control. The FT-IR and UV-Vis spectra did not show any significant changes in spectral properties of treated OTA sample as compared to control. These findings suggest that biofield treatment has significantly altered the physical and thermal properties of OTA, which could make it more useful as chemical intermediate.

2011 ◽  
Vol 415-417 ◽  
pp. 390-394
Author(s):  
Shao Hui Wang

A new Modifier with Silicon radicals as anchoring group and poly(butyl acrylate) as solvatable chain was synthesized and its effect on the properties of HDPE/Anhydrite composites was investigated in this paper. Fourier transmission infrared spectroscopy (FT-IR) results show that the modifier react on the Anhydrite powder particles surface and the modified Anhydrite powder particles particles. compared with that of HDPE/Anhydrite (filled with same non-modified fraction), The impact strength, tensile strength, bending strength and Young’s modulus of modified HDPE/Anhydrite composites increased about 36.6%, 7.5%, 15.6% and 34% respectively. Based on surface analysis by scanning electron microscope (SEM), the Anhydrite powder particles buried well in HDPE matrix when Anhydrite powder particles was coated with the YB modifier. It was found that Anhydrite powder particles significantly increased the crystallization temperature and crystallization rate of HDPE by differential scanning calorimetry (DSC). At same time, through the X-ray diffraction (XRD) found the addition of the YB modifier modified Anhydrite powder particles can not change the formation of crystal HDPE, but can reduce the crystallite size.


2018 ◽  
Vol 25 (4) ◽  
pp. 745-751 ◽  
Author(s):  
Yanwei Jing ◽  
Xueying Nai ◽  
Li Dang ◽  
Donghai Zhu ◽  
Yabin Wang ◽  
...  

Abstract The influence of calcium carbonate (CaCO3) with different polymorphs (calcite and aragonite) and morphologies (granular and rod-like) on mechanical and crystallization properties of polypropylene (PP) was investigated. Meanwhile, these CaCO3 fillers coated with oleic acid were added in different contents to PP. The results indicate that the tensile strength, flexural strength, modulus, and crystallization property of the filler-treated samples are improved, but the impact strength decreased. The crystallinity of the composites is higher than that of neat PP. Moreover, in the rod shape filler-treated sample, in both whisker species, the mechanical properties of composites are superior to the particles filled. Differential scanning calorimetry, X-ray diffraction, and mechanical tests display that calcite whisker-reinforced composite has higher crystallization enthalpy, melting enthalpy, degree of crystallinity, and mechanical properties than aragonite whiskers and calcite particles filled composites.


2012 ◽  
Vol 602-604 ◽  
pp. 254-258
Author(s):  
Chun Qing Huo ◽  
Hong Juan Gu ◽  
Zai Qian Yu ◽  
Long Zhang

An OMMT (organic montmorillonite) was prepared by ion exchanging between Na-montmorillonite and cetyl trimethyl ammonium bromide (CTAB) and was applied to modify Dicyclopentadiene Dioxide Epoxy(R-122). FT-IR spectra showed that the organic molecules had intercalated into the layers of MMT successfully, X-ray diffraction illustrated that the spacing of layers of MMT increased from 1.43 nm to 3.85 nm. R-122 composite was prepared with this nano-organic montmorillonite. When the content of OMMT was 4.0% (wt%), the impact strenth of the composite reached to the highest(21.2 J/m), which is 92.7% higher than the pure R-122 . Morphology of the fracture checked by SEM, reveals a depth depended distribution which generated more new surface, thus can absorb more impact energy. Differential scanning calorimetry(DSC) showed that the thermal stability of the composite had improved compared with the pure resin. And what’s more, the improvement of toughness doesn’t hurt the resin’s heat resistance, it may provid a new way to prepare high performance R-122 composites.


Author(s):  
SHANTHALA H. K. ◽  
JAYAPRAKASH H. V. ◽  
MUNIGANTI RADHAKRISHNA ◽  
JASWANTH GOWDA B. H. ◽  
KARTHIKA PAUL ◽  
...  

Objective: This study aims to synthesize acetylsalicylic acid (ASA) cocrystals using valine as a coformer via a co-crystallization technique to increase the solubility and dissolution rate of ASA. Methods: The ASA-valine cocrystal (1:1 molar ratio) was prepared using the solvent evaporation technique with ethanol: water (50:50). The cocrystal was characterized using Fourier transform infrared spectroscopy (FT-IR), Differential scanning calorimetry (DSC), Powder X-ray diffraction (PXRD), Scanning electron microscopy (SEM), melting point to confirm the formation of cocrystal. The evaluation of cocrystal was done by drug content determination, solubility and dissolution studies. Results: The prepared cocrystal was successfully confirmed for the formation of a hydrogen bond. The melting point of prepared cocrystal was decreased compared to pure ASA and valine, which indicated the formation of a new crystalline form. The FT-IR studies showed the formation of a new hydrogen bond by shifting the-O-H,-C=O and-N-H functional groups. SEM studies ensured that the prepared cocrystals were in needle-like appearance. Finally, DSC and PXRD studies were also indicated the successful formation of ASA-valine cocrystal. The drug release of cocrystal was found to be 100% at 60th min. Where in the case of pure ASA and marketed product of ASA exhibited the dissolution rate of 59% and 69% at 60th min respectively. Conclusion: The co-crystallization technique can be adopted as the best strategy to increase the solubility and dissolution rate of BCS class 2 drugs. Therefore the prepared ASA-valine cocrystal can be a greater alternative to increase the solubility and dissolution rate compared with pure and marketed ASA.


e-Polymers ◽  
2010 ◽  
Vol 10 (1) ◽  
Author(s):  
Shahram Mehdipour-Ataei ◽  
Leila Akbarian-Feizi

AbstractA diamine monomer containing ester, amide and ether functional groups was prepared and its polymerization reaction with different diisocyanates to give main chain poly(ester amide ether urea)s was investigated. The monomer was synthesized via reaction of terephthaloyl chloride with 4-hydroxybenzoic acid and subsequent reaction of the resulted diacid with 1,8-diamino-3,6-dioxaoctane. The polymers were characterized by FT-IR and 1H-NMR spectroscopic method and elemental analysis. The resulting polymers exhibited excellent solubility in polar solvents. Crystallinity of the resulted polymers was evaluated by wide-angle X-ray diffraction (WXRD) method, and they exhibited semi-crystalline patterns. The glass transition temperatures (Tg) of the polymers determined by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) were in the range of 88-112 °C. The temperatures for 10% weight loss (T10) from their thermogravimetric analysis (TGA) curves were found to be in the range of 297-312 °C in air. Also the prepared polyureas showed liquid crystalline character.


2010 ◽  
Vol 428-429 ◽  
pp. 126-131
Author(s):  
Wei Zhong Lu ◽  
Chun Wei ◽  
Qui Shan Gao

Polymethylene bis(p-hydroxybenzoates) were prepared from methyl p-hydroxybenzoate and different diols by melted transesterification reaction. Three liquid crystalline polyesters were synthesized from terephthaloyl dichloride and polymethylene bis(p-hydroxybenzoates). Its structure, morphology and properties were characterized by Ubbelohde viscometer, Fourier transform infrared spectroscopy (FT-IR), Differential scanning calorimetry (DSC), polarized optical microscopy (POM) with a hot stage, and wide-angle X-ray diffraction (WAXD). Results indicated that the intrinsic viscosities were between 0.088 and 0.210 dL/g. Optical microscopy showed that the TLCP has a highly threaded liquid crystalline texture and a high birefringent schlieren texture character of nematic phase and has wider mesophase temperature ranges for all polyesters. DSC analysis were found that the melting point (Tm), isotropic temperature (Ti) of TLCPs decreased and the temperature range of the liquid crystalline phase became wider with increased number of methylene spacers in the polyester. The WAXD results showed that TLCPs owned two strong diffraction peaks at 2θ near 19° and 23°.


Author(s):  
Mateusz Gołdyn ◽  
Anna Komasa ◽  
Mateusz Pawlaczyk ◽  
Aneta Lewandowska ◽  
Elżbieta Bartoszak-Adamska

The study of various forms of pharmaceutical substances with specific physicochemical properties suitable for putting them on the market is one of the elements of research in the pharmaceutical industry. A large proportion of active pharmaceutical ingredients (APIs) occur in the salt form. The use of an acidic coformer with a given structure and a suitable pK a value towards purine alkaloids containing a basic imidazole N atom can lead to salt formation. In this work, 2,6-dihydroxybenzoic acid (26DHBA) was used for cocrystallization of theobromine (TBR) and caffeine (CAF). Two novel salts, namely, theobrominium 2,6-dihydroxybenzoate, C7H9N4O2 +·C7H5O4 − (I), and caffeinium 2,6-dihydroxybenzoate, C8H11N4O2 +·C7H5O4 − (II), were synthesized. Both salts were obtained independently by slow evaporation from solution, by neat grinding and also by microwave-assisted slurry cocrystallization. Powder X-ray diffraction measurements proved the formation of the new substances. Single-crystal X-ray diffraction studies confirmed proton transfer between the given alkaloid and 26DHBA, and the formation of N—H...O hydrogen bonds in both I and II. Unlike the caffeine cations in II, the theobromine cations in I are paired by noncovalent N—H...O=C interactions and a cyclic array is observed. As expected, the two hydroxy groups in the 26DHBA anion in both salts are involved in two intramolecular O—H...O hydrogen bonds. C—H...O and π–π interactions further stabilize the crystal structures of both compounds. Steady-state UV–Vis spectroscopy showed changes in the water solubility of xanthines after ionizable complex formation. The obtained salts I and II were also characterized by theoretical calculations, Fourier-transform IR spectroscopy (FT–IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and elemental analysis.


2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Jiangtao Xing ◽  
Weili Wang ◽  
Wenzheng Xu ◽  
Tianle Yao ◽  
Jun Dong ◽  
...  

In order to improve the safety of hexanitrohexaazaisowurtzitane (CL-20), submicron CL-20 particles were prepared by a siphon ultrasonic-assisted spray refining experimental device. The samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimetry (DSC), and the impact sensitivity of the samples was tested. The results show that the particle size of siphon-refined CL-20 is about 800 nm~1 μm, which is more smooth, mellow, and dense than that of CL-20 prepared by a traditional pressure-refined method. The peak diffraction angle of pressure- and siphon-refined CL-20 is basically the same as that of raw CL-20, and their crystal forms are ε type. The peak strength of pressure- and siphon-refined CL-20 decreased obviously. The apparent activation energy of pressure-refined CL-20 and siphon-refined CL-20 is 13.3 kJ/mol and 11.95 kJ/mol higher than that of raw CL-20, respectively. The thermal stability of CL-20 is improved. The activation enthalpy (ΔH#) is significantly higher than that of raw CL-20, and the characteristic drop is 70.4% and 82.7% higher than that of raw CL-20. The impact sensitivity of siphon-refined CL-20 is lower than that of pressure-refined CL-20, so the safety performance of an explosive is improved obviously.


Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4242
Author(s):  
Tianliang Feng ◽  
Yangzhou Li ◽  
Liang Fang ◽  
Zhenming Chen

As artificial marble is abundant and widely used in residential and commercial fields, the resource utilization of artificial marble wastes (AMWs) has become extremely important in order to protect the environment. In this paper, polybutylene terephthalate/artificial marble wastes (PBT/AMWs) composites were prepared by melt blending to maximize resource utilization and increase PBT performance. The research results showed that the filling of AMWs was beneficial to the improvement of PBT-related performance. X-ray diffraction analysis results indicated that after filling AMWs into the PBT matrix, the crystal structure of PBT was not changed. Heat deflection temperature (HDT) analysis results indicated that the HDT of PBT composites with 20 wt% AMWs reached 66.68 °C, which was 9.12 °C higher than that of neat PBT. Differential scanning calorimetry analysis results showed that heterogeneous nucleation could be well achieved when the filling content was 15 wt%; impact and scanning electron microscope analysis results showed that due to the partial core-shell structure of the AMWs, the impact strength of PBT was significantly improved after filling. When the filling amount was 20 wt%, the impact strength of the PBT composites reached 23.20 kJ/m2, which was 17.94 kJ/m2 higher than that of neat PBT. This research will not only provide new insights into the efficient and high-value utilization of AMWs, but also provide a good reference for improved applications of other polymers.


2020 ◽  
Vol 1 (4) ◽  
pp. 22-25
Author(s):  
Azwan Morni

This study reports a green method for the synthesis of gold nanoparticles (AuNPs) using the aqueous extract of Salix aegyptiaca extract. The effects of gold salt concentration, extract concentration and extract quantity were investigated on nanoparticles synthesis. Novel methods of ideally synthesizing AuNPs are thus thought that are formed at ambient temperatures, neutral pH, low costs and environmentally friendly fashion. AuNPs were characterized with different techniques such as UV–vis spectroscopy, FT-IR spectroscopy, X-ray diffraction, and TEM. FT-IR spectroscopy revealed that gold nanoparticles were functionalized with biomolecules that have primary carbonyl group, -OH groups and other stabilizing functional groups. TEM experiments showed that these nanoparticles are formed with various shapes and X-ray diffraction pattern showed high purity and face centered cubic structure of AuNPs. For electrochemical properties of AuNPs, a modified glassy carbon electrode using AuNPs (AuNPs/GCE) was investigated. The results show that electronic transmission rate between the modified electrode and [Fe (CN)6]3-/4- increased.


Sign in / Sign up

Export Citation Format

Share Document