scholarly journals Champion Position Analysis in Short Track Speed Skating Competitions From 2007 to 2019

2021 ◽  
Vol 12 ◽  
Author(s):  
Lixin Sun ◽  
Tianxiao Guo ◽  
Fei Liu ◽  
Kuan Tao
Keyword(s):  
Energy Consumption ◽  
Standard Deviation ◽  
Short Distance ◽  
Long Distance ◽  
Average Standard Deviation ◽  
Starting Position ◽  
Speed Skating ◽  
Cost Of Energy ◽  
Positioning Strategy ◽  
The Relationship

Purpose: Short track speed skating is a racing sport with racing tactics are equally crucial to speed and technical skating skills. Therefore, to investigate the relationship between starting and finishing positions for elite skaters and subsequently, explore pacing patterns for champions are necessary.Methods: To investigate a pattern of effective tactical positioning strategy, Kendall’s tau-b correlations between starting and finishing position were calculated, with 500 m races having the most positive correlation (0.347, P < 0.05).Results: Furthermore, starting position distributions of winners in each round, as well as the fluctuations in champion starting positions across rounds were analyzed. Our findings showed that skaters on the first track were inclined to win the rounds in 500, 1,000, and 1,500 m (28, 28, and 22%, respectively), and the differences between starting and finishing positions for champions were minimized in semi-finals. Meanwhile, the pacing patterns were gaining more fluctuations by the increase of race distances for champions, as the average standard deviation of lap rankings equaled 0.90, 1.15, and 2.21 for 500, 1,000, and 1,500 m races, respectively.Conclusion: In conclusion, elite skaters should adopt flexible tactics at the lowest cost of energy consumption. The overall variability of lap ranking in long-distance races were distinctly higher than it in short distance.

scholarly journals Teknik Konservasi Energi Pada Pompa Submersible Dengan Menggunakan Variable Frequency Drive

2018 ◽  
Vol 1 (2) ◽  
pp. 84-93
Author(s):  
Haji Sofyar M.Eng
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Simulation Model ◽  
Induction Motor ◽  
Centrifugal Pump ◽  
Variable Frequency ◽  
Variable Frequency Drive ◽  
Cost Of Energy ◽  
The Cost ◽  
The Relationship

Energy conservation is beneficial not only to reduce consumption and the cost of energy consumption, but also to give a better impact on the environment. In this study a simulation model is created which is a reflection of the relationship con-dition between variable frequency drive (VFD), induction motor and centrifugal pump. By creating a simulation model will be able to know the potential savings that will be provided if the variable frequency drive is used.

Reliability of the Minimum Masking Level as Outcome Variable in Tinnitus Clinical Research

2020 ◽  
Vol 29 (3) ◽  
pp. 429-435
Author(s):  
Patricia C. Mancini ◽  
Richard S. Tyler ◽  
Hyung Jin Jun ◽  
Tang-Chuan Wang ◽  
Helena Ji ◽  
...  
Keyword(s):  
Standard Deviation ◽  
High Frequency ◽  
Pearson Correlation ◽  
Correlation Coefficients ◽  
Outcome Variable ◽  
Reliable Estimate ◽  
Moderate Correlation ◽  
Trained Subjects ◽  
The Relationship ◽  
Minimum Intensity

Purpose The minimum masking level (MML) is the minimum intensity of a stimulus required to just totally mask the tinnitus. Treatments aimed at reducing the tinnitus itself should attempt to measure the magnitude of the tinnitus. The objective of this study was to evaluate the reliability of the MML. Method Sample consisted of 59 tinnitus patients who reported stable tinnitus. We obtained MML measures on two visits, separated by about 2–3 weeks. We used two noise types: speech-shaped noise and high-frequency emphasis noise. We also investigated the relationship between the MML and tinnitus loudness estimates and the Tinnitus Handicap Questionnaire (THQ). Results There were differences across the different noise types. The within-session standard deviation averaged across subjects varied between 1.3 and 1.8 dB. Across the two sessions, the Pearson correlation coefficients, range was r = .84. There was a weak relationship between the dB SL MML and loudness, and between the MML and the THQ. A moderate correlation ( r = .44) was found between the THQ and loudness estimates. Conclusions We conclude that the dB SL MML can be a reliable estimate of tinnitus magnitude, with expected standard deviations in trained subjects of about 1.5 dB. It appears that the dB SL MML and loudness estimates are not closely related.

Enzyme-assisted pulp refining: an energy saving approach

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Amit Kumar ◽  
Chhotu Ram ◽  
Adebabay Tazeb
Keyword(s):  
Energy Consumption ◽  
Paper Industry ◽  
Electrical Power ◽  
Manufacturing Cost ◽  
Paper Properties ◽  
Paper Making ◽  
Paper Manufacturing ◽  
Cost Of Energy ◽  
Refining Time ◽  
Electrical Power Consumption

AbstractEnergy conservation has become an essential step in pulp and paper industry due to diminishing fossil reserves and high cost of energy. Refining is a mechanical treatment of pulp that modifies the structure of the fibres in order to achieve desired paper-making properties. However, it consumes considerable amount of energy. The electrical power consumption has a direct impact on paper manufacturing cost. Therefore, there is a requirement to minimize the energy cost. Enzyme-assisted refining is the environment friendly option that reduces the energy consumption for papermaking. Enzyme-assisted refining is defined as mechanical refining after pretreatment of pulp with enzymes such as cellulases and hemicellulases. It not only reduces the energy consumption but also improves the quality of finished paper. Enzymes improve the beatability of pulp at same refining degree (°SR) and desired paper properties can be achieved at decreased refining time. The selection of suitable enzyme, optimization of enzyme dose and appropriate reaction time are the key factors for energy reduction and pulp quality improvement during enzyme-assisted refining.

scholarly journals Empirical Research on the Relationship amongst Renewable Energy Consumption, Economic Growth and Foreign Direct Investment in Kazakhstan and Uzbekistan

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 332
Author(s):  
Janusz Grabara ◽  
Arsen Tleppayev ◽  
Malika Dabylova ◽  
Leonardus W. W. Mihardjo ◽  
Zdzisława Dacko-Pikiewicz
Keyword(s):  
Economic Growth ◽  
Foreign Direct Investment ◽  
Renewable Energy ◽  
Energy Consumption ◽  
Direct Investment ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Renewable Energy Consumption ◽  
Integration Test ◽  
The Relationship

In this contemporary era, environmental problems spread at different levels in all countries of the world. Economic growth does not just depend on prioritizing the environment or improving the environmental situation. If the foreign direct investment is directed to the polluting industries, they will increase pollution and damage the environment. The purpose of the study is to consider the relationship between foreign direct investment in Kazakhstan and Uzbekistan and economic growth and renewable energy consumption. The study is based on data obtained from 1992 to 2018. The results show that there is a two-way link between foreign direct investment and renewable energy consumption in the considered two countries. The Granger causality test approach is applied to explore the causal relationship between the variables. The Johansen co-integration test approach is also employed to test for a relationship. The empirical results verify the existence of co-integration between the series. The main factors influencing renewable energy are economic growth and electricity consumption. To reduce dependence on fuel-based energy sources, Kazakhstan and Uzbekistan need to attract energy to renewable energy sources and implement energy efficiency based on rapid progress. This is because renewable energy sources play the role of an engine that stimulates the production process in the economy for all countries.

scholarly journals Correlation between L-Lactate Concentrations in Beef Cattle, Obtained Using a Hand-Held Lactate Analyzer and a Lactate Assay Colorimetric Kit

Animals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 926
Author(s):  
Daniela M. Meléndez ◽  
Sonia Marti ◽  
Luigi Faucitano ◽  
Derek B. Haley ◽  
Timothy D. Schwinghamer ◽  
...  
Keyword(s):  
Statistical Significance ◽  
Road Transportation ◽  
Long Distance ◽  
Suitable Alternative ◽  
Blood Samples ◽  
Time Points ◽  
Pooled Data ◽  
Red Angus ◽  
Relationship Of ◽  
The Relationship

Lactate is a product of anaerobic glycolysis, used in animal research as an indicator of muscle fatigue. Therefore, it has been used as an indicator of cattle response to long distance transportation. The aim of this study was to assess the relationship of L-lactate concentrations measured using a Lactate Scout+ analyzer and a traditional lactate assay colorimetric kit. Blood samples were collected by venipuncture from 96 steers (Black or Red Angus × Hereford/Simmental and Black or Red Angus × Charolais; 247 ± 38.2 kg BW) prior to loading (LO1) and after 36 h of transport, and prior to reloading and after an additional 4 h of road transportation, and on d 1, 2, 3, 5, 14, and 28 after transport. The Lactate Scout+ analyzer strip was dipped in blood at the time of sampling, while blood samples were collected into sodium fluoride tubes for use in the colorimetric analysis. Pearson correlations were calculated to assess the strength of the relationship between the experimental methods for the quantification of L-lactate concentrations. The magnitude and direction of the correlation, and the level of statistical significance varied over the observed time points, ranging from r = −0.03 (p = 0.75; LO1) to r = 0.75 (p < 0.0001; d 3). The correlation for the pooled data was weak but statistically significant (r = 0.33, p < 0.0001). Based on the low magnitude of the correlation due to variability across sampling time points in this study, the Lactate Scout+ analyzer is not a suitable alternative to a lab-based assay (considered the gold standard) for measuring L-lactate in transported cattle.

scholarly journals A Long-Distance Communication Architecture for Medical Devices Based on LoRaWAN Protocol

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 940
Author(s):  
Nicoleta Cristina Gaitan
Keyword(s):  
Energy Consumption ◽  
Long Range ◽  
Medical Devices ◽  
Low Energy ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
Communication Architecture ◽  
Low Energy Consumption ◽  
Distance Communication

Recent market studies show that the market for remote monitoring devices of different medical parameters will grow exponentially. Globally, more than 4 million individuals will be monitored remotely from the perspective of different health parameters by 2023. Of particular importance is the way of remote transmission of the information acquired from the medical sensors. At this time, there are several methods such as Bluetooth, WI-FI, or other wireless communication interfaces. Recently, the communication based on LoRa (Long Range) technology has had an explosive development that allows the transmission of information over long distances with low energy consumption. The implementation of the IoT (Internet of Things) applications using LoRa devices based on open Long Range Wide-Area Network (LoRaWAN) protocol for long distances with low energy consumption can also be used in the medical field. Therefore, in this paper, we proposed and developed a long-distance communication architecture for medical devices based on the LoRaWAN protocol that allows data communications over a distance of more than 10 km.

scholarly journals PSVII-3 Correlations between L-lactate concentrations obtained using a handheld lactate analyser and a lactate assay colorimetric kit in beef cattle transported by road

2020 ◽  
Vol 98 (Supplement_4) ◽  
pp. 296-297
Author(s):  
Daniela M Meléndez ◽  
Sonia Marti ◽  
Luigi Faucitano ◽  
Derek B Haley ◽  
Timothy D Schwinghamer ◽  
...  
Keyword(s):  
Statistical Significance ◽  
Cost Effective ◽  
Road Transportation ◽  
Long Distance ◽  
Suitable Alternative ◽  
Blood Samples ◽  
Handheld Device ◽  
Time Points ◽  
Relationship Of ◽  
The Relationship

Abstract Blood metabolites are used to assess a variety of animal conditions for veterinary diagnosis and research. Concentration of metabolites in blood can be measured using a commercially-available lab-based assay or in real-time using a handheld device developed to be more time- and cost-effective than the lab-based method. Lactate is a product of anaerobic glycolysis, used in animal research as an indicator of muscle fatigue. Therefore, it has been used as an indicator of cattle response to long distance transportation. The aim of this study was to assess the relationship of L-lactate concentrations measured using a Lactate Scout+ analyzer (Lactate Scout, EFK Diagnostics, Barleben, Germany) and a lactate assay colorimetric kit (Lactate Assay Kit, Cell Biolabs Inc., San Diego, CA). Blood samples were collected by venipuncture from 96 steers (245 ± 35.7 kg BW) prior to (L1) and after 36 h, and prior to and after an additional 4 h of road transportation, and on d 1, 2, 3, 5, 14, and 28 after transport. The Lactate Scout+ analyzer strip was dipped in blood at the time of sampling, while blood samples were collected into sodium fluoride tubes for use in colorimetric analysis. Pearson correlations were calculated to determine the relationship between the experimental methods for the quantification of L-lactate concentrations. The strengths and levels of statistical significance of the correlation varied over the observed time points, r = -0.03, P = 0.75 (L1) to r = 0.75, P = &lt; 0.0001 (d 3). The correlation for the pooled data was weak but statistically significant (r = 0.33, P &lt; 0.001). Based on the experimental results, the Lactate Scout+ analyzer is not a suitable alternative to a lab-based assay for measuring L-lactate in transported cattle, due to variability across sampling time points and weak correlation with the traditional enzymatic method.

scholarly journals K → μ+μ− as a clean probe of short-distance physics

2021 ◽  
Vol 2021 (7) ◽  
Author(s):  
Avital Dery ◽  
Mitrajyoti Ghosh ◽  
Yuval Grossman ◽  
Stefan Schacht
Keyword(s):  
Matrix Element ◽  
Standard Model ◽  
Short Distance ◽  
Time Dependent ◽  
Final States ◽  
Interference Effects ◽  
Fundamental Theory ◽  
Long Distance ◽  
Ckm Matrix ◽  
The Standard Model

Abstract The K → μ+μ− decay is often considered to be uninformative of fundamental theory parameters since the decay is polluted by long-distance hadronic effects. We demonstrate that, using very mild assumptions and utilizing time-dependent interference effects, ℬ(KS → μ+μ−)ℓ=0 can be experimentally determined without the need to separate the ℓ = 0 and ℓ = 1 final states. This quantity is very clean theoretically and can be used to test the Standard Model. In particular, it can be used to extract the CKM matrix element combination $$ \mid {V}_{ts}{V}_{td}\sin \left(\beta +{\beta}_s\right)\mid \approx \mid {A}^2{\lambda}^5\overline{\eta}\mid $$ ∣ V ts V td sin β + β s ∣ ≈ ∣ A 2 λ 5 η ¯ ∣ with hadronic uncertainties below 1%.

Sign in / Sign up

Export Citation Format

Share Document