scholarly journals Life Cycle Assessment of Sustainable Broiler Production Systems: Effects of Low-Protein Diet and Litter Incineration

Agriculture ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 921
Author(s):  
Akifumi Ogino ◽  
Kazato Oishi ◽  
Akira Setoguchi ◽  
Takashi Osada
Keyword(s):  
Climate Change ◽  
Life Cycle Assessment ◽  
Energy Consumption ◽  
Environmental Impacts ◽  
Broiler Chicken ◽  
Production Systems ◽  
Ghg Emissions ◽  
Manure Management ◽  
Low Protein ◽  
Broiler Production

We conducted a life cycle assessment (LCA) to compare environmental impacts of conventional (CNV) broiler chicken production in Japan with those of three mitigation options: a low-protein diet supplemented with more crystalline amino acids (LP), incineration of broiler litter (IC), and their combination (LP + IC). Feed production, feed transport, broiler housing, and manure management were included in the LCA, with 1 kg of liveweight of broiler chicken as the functional unit. The CNV environmental impacts were: climate change, 1.86 kg CO2e; acidification, 52.6 g SO2e; eutrophication, 18.3 g PO4e; energy consumption, 18.8 MJ. Since broiler manure management has a lower N2O emission factor, the LP diet’s effects on greenhouse gas (GHG) emissions were limited. Because a large amount of ammonia is emitted from broiler-litter composting and the LP diet reduced nitrogen excretion and consequent NH3 emission, the LP showed lower acidification and eutrophication potentials than CNV. The IC system reduced fuel consumption by utilizing the generated heat for broiler-house heating and thus had lower GHG emissions and energy consumption; it reduced ammonia emission from the manure-management process by incineration and thus had lower acidification and eutrophication potentials even when including NOX generation by litter incineration. The LP + IC system had lower environmental impacts than CNV: for climate change (by 16%), acidification (48%), eutrophication (24%), and energy consumption (15%). Mitigation opportunities for broiler chickens remain, and broiler production systems with mitigation options help produce chickens more sustainably.

scholarly journals Life Cycle Assessment of Heaven Mushroom Product

2021 ◽  
Vol 228 ◽  
pp. 02003
Author(s):  
Phatcharapron Sukkanta ◽  
Krittaphas Mongkolkoldhumrongkul
Keyword(s):  
Climate Change ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Greenhouse Gas ◽  
Environmental Impacts ◽  
Functional Unit ◽  
Assessment Method ◽  
Cradle To Gate ◽  
Impacts Of Climate Change

Climate change affects all regions around the world, so efforts to minimize the environmental impacts of climate change have high importance. The aim of this study is to evaluate the environmental impacts on the production of heaven mushroom product at the Ban Tai Khod community in Rayong, Thailand. In this study, cradle to gate was selected as the system boundary and functional unit from the life cycle assessment method. The results found that the process of building a mushroom house has the highest greenhouse gas emissions of 1, 496.609 kgCO2eq. The mushroom cubes mixing process has the highest energy consumption throughout the production process, requiring an energy consumption of 5.595 kWh. The greenhouse gas is released amount 3, 588.362 kgCO2eq. throughout this process. Additionally, the payback period of the heaven mushroom product is 0.92 years.

scholarly journals ANALISIS POTENSI DAMPAK LINGKUNGAN DARI BUDIDAYA TEBU MENGGUNAKAN PENDEKATAN LIFE CYCLE ASSESSMENT (LCA)

2019 ◽  
Vol 15 (1) ◽  
pp. 51-64
Author(s):  
Arieyanti Dwi Astuti
Keyword(s):  
Climate Change ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Natural Resources ◽  
Environmental Impacts ◽  
Raw Material ◽  
Photochemical Oxidation ◽  
Primary Data ◽  
Human Toxicity

ENGLISHMinimizing the adverse impact of sugarcane plantation can be carried out through many ways including increasing the efficiency of energy and natural resources consumption as well as improving the management of waste and emissions. Life Cycle Assessment (LCA) was applied to assess the environmental impact of sugarcane plantation without considering sugarcane usage as a raw material in the sugar industry (gate to gate). CML (baseline) was used as Life Cycle Impact Assessment (LCIA) method. This study aimed to: 1) examine the natural resources and energy consumption; 2) analyze and identify potential environmental impacts; and 3) recommend alternative improvements to reduce environmental impacts. It used primary data and secondary data. The results showed that: 1) natural resources were used to produce 16,097 ton of sugarcane or 1 ton of sugar, were land requirement (0.233 ha), water consumption (2,223.117 m3), and energy consumption (19,234.254 MJ); 2) there are five most potential environmental impacts which are analyzed by using openLCA including climate change (134,275.23 kg CO2 eq), eutrophication (120.24 kg PO4 eq), acidification (1.54 kg SO2 eq), photochemical oxidation (0.36 kg ethylene eq), and human toxicity (0.15 kg 1.4-dichlorobenzene eq); 3) alternative recommendation could be conducted by reducing the usage of inorganic fertilizer, and utilizing cane trash (dry leaves, green leaves, and tops) as boiler fuel for production process in sugar factory. INDONESIABudidaya tebu menimbulkan dampak negatif terhadap lingkungan sehingga diperlukan upaya untuk meminimalisir dampak negatif tersebut melalui efisiensi konsumsi energi, konsumsi sumber daya alam (SDA), serta pengelolaan limbah dan emisi. LCA merupakan salah satu metode untuk menganalisis dampak lingkungan dari budidaya tebu tanpa mempertimbangkan penggunaan tebu panen sebagai bahan baku industri gula (gate to gate). Metode yang digunakan untuk LCIA adalah CML (baseline). Penelitian ini  bertujuan untuk: 1) menghitung penggunaan SDA dan energy, 2) menganalisis dan mengidentifikasi potensi dampak lingkungan, dan 3) menyajikan rekomendasi perbaikan untuk menurunkan dampak lingkungan. Data penelitian berupa data primer dan data sekunder. Unit fungsional pada penelitian ini adalah produksi 1 ton gula untuk satu tahun. Hasil penelitian menunjukkan bahwa: 1) konsumsi SDA berupa lahan tebu seluas 0,233 ha, air sebanyak 2.223,117 m3 dan energi sebesar 19.234,254 MJ; 2) potensi dampak lingkungan yang dianalisis menggunakan OpenLCA menghasilkan 5 dampak lingkungan tertinggi, yaitu climate change (134.275,23 kg CO2 eq), eutrophication (120,24 kg PO4 eq), acidification (1,54 kg SO2 eq), photochemical oxidation (0,36 kg ethylene eq), and human toxicity (0,15 kg 1,4-dichlorobenzene eq); 3) alternatif perbaikan yang direkomendasikan berupa penggunaan pupuk anorganik dengan dosis yang tepat dan memanfaatkan limbah pasca pane n (daun kering, serasah) sebagai bahan bakar boiler untuk proses produksi industri gula.

scholarly journals A partial life cycle assessment approach to evaluate the energy intensity and related greenhouse gas emission in dairy farms

2013 ◽  
Vol 44 (2s) ◽  
Author(s):  
Lelia Murgia ◽  
Giuseppe Todde ◽  
Maria Caria ◽  
Antonio Pazzona
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Milk Production ◽  
Environmental Sustainability ◽  
Greenhouse Gas Emission ◽  
Production Systems ◽  
Dairy Farms ◽  
Dairy Farming ◽  
Feeding Management

Dairy farming is constantly evolving towards more intensive levels of mechanization and automation which demand more energy consumption and result in higher economic and environmental costs. The usage of fossil energy in agricultural processes contributes to climate change both with on-farm emissions from the combustion of fuels, and by off-farm emissions due to the use of grid power. As a consequence, a more efficient use of fossil resources together with an increased use of renewable energies can play a key role for the development of more sustainable production systems. The aims of this study were to evaluate the energy requirements (fuels and electricity) in dairy farms, define the distribution of the energy demands among the different farm operations, identify the critical point of the process and estimate the amount of CO2 associated with the energy consumption. The inventory of the energy uses has been outlined by a partial Life Cycle Assessment (LCA) approach, setting the system boundaries at the farm level, from cradle to farm gate. All the flows of materials and energy associated to milk production process, including crops cultivation for fodder production, were investigated in 20 dairy commercial farms over a period of one year. Self-produced energy from renewable sources was also accounted as it influence the overall balance of emissions. Data analysis was focused on the calculation of energy and environmental sustainability indicators (EUI, CO2-eq) referred to the functional units. The production of 1 kg of Fat and Protein Corrected Milk (FPCM) required on average 0.044 kWhel and 0.251 kWhth, corresponding to a total emission of 0.085 kg CO2-eq). The farm activities that contribute most to the electricity requirements were milk cooling, milking and slurry management, while feeding management and crop cultivation were the greatest diesel fuel consuming operation and the largest in terms of environmental impact of milk production (73% of energy CO2-eq emissions). The results of the study can assist in the development of dairy farming models based on a more efficient and profitable use of the energy resources.

Comprehensive analysis of environmental impacts and energy consumption of biomass-to-methanol and coal-to-methanol via life cycle assessment

Energy ◽  
2020 ◽  
Vol 204 ◽  
pp. 117961 ◽  
Author(s):  
Yigang Liu ◽  
Guoxuan Li ◽  
Zhengrun Chen ◽  
Yuanyuan Shen ◽  
Hongru Zhang ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Environmental Impacts ◽  
Comprehensive Analysis

scholarly journals Unraveling Green Information Technology Systems as a Global Greenhouse Gas Emission Game-Changer

2019 ◽  
Vol 9 (2) ◽  
pp. 43 ◽  
Author(s):  
Katundu Imasiku ◽  
Valerie Thomas ◽  
Etienne Ntagwirumugara
Keyword(s):  
Climate Change ◽  
Information Technology ◽  
Sustainable Development ◽  
Environmental Impacts ◽  
Carbon Emissions ◽  
Renewable Resources ◽  
Carbon Emission ◽  
Ghg Emissions ◽  
Green Growth ◽  
Green Information Technology

Green information technology systems (Green ITS) are proposed as a strategy to reduce greenhouse gases (GHGs) emissions and other environmental impacts while supporting ecological sustainable development. The Green ITS concept combines both Green information technology (IT) and Green information system (IS) applications. The Green ITS concept has the potential to combat the carbon emission problem globally, beyond simply Green IT, because it combines management, organizational, and technology dimensions of climate change mitigation and adaptation, especially if supported by global policy. Examples include life cycle assessment software for measuring GHG emissions, and software for monitoring GHG emissions. Previous studies on environmental burdens such as GHGs, water and air pollution, energy losses and other forms of waste alongside socio-economic dependent variables including renewable resources and climate change policies are reviewed and synthesized. The research analysis conjointly points to the usage of renewable resources such as solar and wind as a critical strategy to scale back GHG emissions and enhance green growth. Empirical evidence shows that developed countries can reduce their carbon emissions while developing countries can utilize carbon emission-free technologies as they aspire to achieve development. The two significant benefits of the Green ITS strategy are first, to provide the environmental benefits of reducing greenhouse emissions and other environmental impacts and second, to enhance global green growth, which supports achievement of ecological sustainable development. Green ITS tools support achievement of the UN SDG 7, 13 and 15, which emphasize clean energy, climate action and ecological sustainable development, respectively. Future research directions include the formulation of a strategy to combat GHGs and design of a system to monitor carbon emissions and other waste remotely.

scholarly journals Scenario Analysis for GHG Emission Reduction Potential of the Building Sector for New City in South Korea

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5514
Author(s):  
Seo-Hoon Kim ◽  
SungJin Lee ◽  
Seol-Yee Han ◽  
Jong-Hun Kim
Keyword(s):  
Climate Change ◽  
Energy Consumption ◽  
South Korea ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Ghg Emissions ◽  
Building Energy ◽  
Building Sector ◽  
Ghg Reduction ◽  
New City

A new government report on climate change shows that global emissions of greenhouse gases have increased to very high levels despite various policies to reduce climate change. Building energy accounts for 40% of the world’s energy consumption and accounts for 33% of the world’s greenhouse gas emissions. This study applied the LEAP (Long-range energy alternatives planning) model and Bass diffusion method for predicting the total energy consumption and GHG (Greenhouse Gas) emissions from the residential and commercial building sector of Sejong City in South Korea. Then, using the Bass diffusion model, three scenarios were analyzed (REST: Renewable energy supply target, BES: Building energy saving, BEP: Building energy policy) for GHG reduction. The GHG emissions for Sejong City for 2015–2030 were analyzed, and the past and future GHG emissions of the city were predicted in a Business-as-Usual (BAU) scenario. In the REST scenario, the GHG emissions would attain a 24.5% reduction and, in the BES scenario, the GHG emissions would attain 12.81% reduction by 2030. Finally, the BEP scenario shows the potential for a 19.81% GHG reduction. These results could be used to guide the planning and development of the new city.

scholarly journals Life Cycle Assessment and Environmental Valuation of Biochar Production: Two Case Studies in Belgium

Energies ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2166 ◽  
Author(s):  
Sara Rajabi Hamedani ◽  
Tom Kuppens ◽  
Robert Malina ◽  
Enrico Bocci ◽  
Andrea Colantoni ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Production Systems ◽  
Point Of View ◽  
Environmental Benefits ◽  
Pig Manure ◽  
Future Research ◽  
Life Cycle Perspective ◽  
The Impact

It is unclear whether the production of biochar is economically feasible. As a consequence, firms do not often invest in biochar production plants. However, biochar production and application might be desirable from a societal perspective as it might entail net environmental benefits. Hence, the aim of this work has been to assess and monetize the environmental impacts of biochar production systems so that the environmental aspects can be integrated with the economic and social ones later on to quantify the total return for society. Therefore, a life cycle analysis (LCA) has been performed for two potential biochar production systems in Belgium based on two different feedstocks: (i) willow and (ii) pig manure. First, the environmental impacts of the two biochar production systems are assessed from a life cycle perspective, assuming one ton of biochar as the functional unit. Therefore, LCA using SimaPro software has been performed both on the midpoint and endpoint level. Biochar production from willow achieves better results compared to biochar from pig manure for all environmental impact categories considered. In a second step, monetary valuation has been applied to the LCA results in order to weigh environmental benefits against environmental costs using the Ecotax, Ecovalue, and Stepwise approach. Consequently, sensitivity analysis investigates the impact of variation in NPK savings and byproducts of the biochar production process on monetized life cycle assessment results. As a result, it is suggested that biochar production from willow is preferred to biochar production from pig manure from an environmental point of view. In future research, those monetized environmental impacts will be integrated within existing techno-economic models that calculate the financial viability from an investor’s point of view, so that the total return for society can be quantified and the preferred biochar production system from a societal point of view can be identified.

Life Cycle Assessment of Silicate Cementitious Material Production Using Calcium Carbide Sludge

2014 ◽  
Vol 599 ◽  
pp. 324-327 ◽  
Author(s):  
Jia Ping Cui ◽  
Yu Liu ◽  
Zhi Hong Wang ◽  
Li Li Zhao ◽  
Fei Fei Shi ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Environmental Impacts ◽  
Waste Heat ◽  
Calcium Carbide ◽  
Cementitious Material ◽  
Environmental Benefits ◽  
Drying Process ◽  
Cement Production

The environmental impacts of cement production using two pre-drying processes, i.e., coal-fired pre-drying process and pre-drying process by waste heat from kiln tail process were analyzed and compared through life cycle assessment (LCA). The results show that the energy consumption, GWP, AP, POCP, HT and EP of pre-drying process by waste heat from kiln tail are about 1%, 2%, 5.2%, 5% ,3.5% and 3.8% lower than coal-fired process; therefore the application of pre-drying process by waste heat from kiln tail has obvious environmental benefits.

Sign in / Sign up

Export Citation Format

Share Document