scholarly journals Crop Response to Leaf and Seed Applications of the Biostimulant ComCat® under Stress Conditions

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1161
Author(s):  
Roland Gerhards ◽  
Fructueuse N. Ouidoh ◽  
André Adjogboto ◽  
Vodéa Armand Pascal Avohou ◽  
Berteulot Latus Sètondji Dossounon ◽  
...  
Keyword(s):  
Seed Treatment ◽  
Crop Production ◽  
Field Experiments ◽  
Nutrient Deficiency ◽  
Natural Compounds ◽  
Application Rate ◽  
Winter Barley ◽  
Block Designs ◽  
Crop Response ◽  
Yield Data

Although clear evidence for benefits in crop production is partly missing, several natural compounds and microorganisms have been introduced to the market as biostimulants. They are supposed to enhance nutrient efficiency and availability in the rhizosphere, reduce abiotic stress, and improve crop quality parameters. Biostimulants often derive from natural compounds, such as microorganisms, algae, and plant extracts. In this study, the commercial plant extract-based biostimulant ComCat® was tested in two field experiments with maize in the communities of Banikoara and Matéri in Northern Benin and six pot experiments (four with maize and two with winter barley) at the University of Hohenheim in Germany. Maize was grown under nutrient deficiency, drought, and weed competition, and winter barley was stressed by the herbicide Luximo (cinmethylin). ComCat® was applied at half, full, and double the recommended field rate (50, 100, and 200 g ha−1) on the stressed and unstressed control plants as leaf or seed treatment. The experiments were conducted in randomized complete block designs with four replications. The above-ground biomass and yield data of one experiment in Benin were collected. The biostimulant did not promote maize and winter barley biomass production of the unstressed plants. When exposed to stress, ComCat@ resulted only in one out of eight experiments in higher barley biomass compared to the stressed treatment without ComCat® application. There was a reduced phytotoxic effect of cinmethylin after seed treatment with ComCat®. Crop response to ComCat® was independent of the application rate. Basic and applied studies are needed to investigate the response of crops to biostimulants and their mechanisms of action in the plants before they should be used in practical farming.

scholarly journals Induction of defense-related enzymes and enhanced disease resistance in maize against Fusarium verticillioides by seed treatment with Jacaranda mimosifolia formulations

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rabia Naz ◽  
Asghari Bano ◽  
Asia Nosheen ◽  
Humaira Yasmin ◽  
Rumana Keyani ◽  
...  
Keyword(s):  
Seed Treatment ◽  
Crop Production ◽  
Field Experiments ◽  
Lipid Transfer Protein ◽  
Fusarium Verticillioides ◽  
Protective Effects ◽  
Leaf Extracts ◽  
Stalk Rot ◽  
Half Strength ◽  
Jacaranda Mimosifolia

AbstractFusarium verticillioides is an important fungal pathogen of maize, causing stalk rot and severely affecting crop production. The aim of this study was to characterize the protective effects of formulations based on Jacaranda mimosifolia leaf extracts against F. verticillioides in maize. We compared different seed treatments comprising J. mimosifolia extracts, chemical fungicide (mefenoxam) and salicylic acid to modulate the defense system of maize host plants. Both aqueous and methanolic leaf extracts of J. mimosifolia (1.2% w/v) resulted in 96–97% inhibition of mycelial growth of F. verticillioides. While a full-dose (1.2%) extract of J. mimosifolia provided significant protective effects on maize plants compared to the inoculated control, a half-dose (0.6% w/v) application of J. mimosifolia in combination with half-strength mefenoxam was the most effective treatment in reducing stalk rot disease in pot and field experiments. The same seed treatment significantly upregulated the expression of genes in the leaves encoding chitinase, glucanase, lipid transfer protein, and pathogenesis-related proteins PR-1, PR-5 and PR-10, 72 h after inoculation. This treatment also induced the activities of peroxidase, polyphenol oxidase, protease, acid invertase, chitinase and phenylalanine ammonia lyase. We conclude that seed pre-treatment with J. mimosifolia extract with half-strength chemical mefenoxam is a promising approach for the management of stalk rot in maize.

Calibration and assessment of soil tests for estimating fertilizer requirements. I. Statistical models and tests of significance.

Soil Research ◽  
1967 ◽  
Vol 5 (2) ◽  
pp. 275 ◽  
Author(s):  
JD Colwell
Keyword(s):  
Field Experiments ◽  
Fertilizer Application ◽  
Application Rate ◽  
Yield Response ◽  
Soil Test ◽  
Regression Equations ◽  
Soil Tests ◽  
Yield Data ◽  
Fertilizer Application Rate ◽  
The Relationship

The calibration of soil tests requires a statistical model to describe the relationship between yield of crop, fertilizer application rate, and soil test. Yield response to fertilizers can be represented by polynomials both in the natural and square-root scales, and these polynomials can be generalized for a given crop and region, using soil test expressions. The generalization can be done using orthogonal polynomials and simultaneous regression equations that relate the coefficients of the polynomials to the soil test variables. This procedure is necessary because of heterogeneity in the residual sum of squares of regressions fitted to the yield data of several fertilizer field experiments within a region. The set of simultaneous regression equations constitutes a direct calibration of the soil test, since it can be used for the estimation of economic fertilizer requirement. Highly significant calibrations are demonstrated for a phosphorus soil test with wheat and a potassium test with potatoes. A nitrogen test gave only non-significant (P > 0.05) relationships.

The questions of methodology of field experiments in agriculture and crop production

2018 ◽  
Vol 1 (94) ◽  
pp. 38-44
Author(s):  
А.M. Malienkо ◽  
N.E. Borуs ◽  
N.G. Buslaeva
Keyword(s):  
Labor Productivity ◽  
Crop Production ◽  
Field Experiments ◽  
Weather Conditions ◽  
High Accuracy ◽  
Experimental Plot ◽  
Increase Labor Productivity ◽  
Biometric Parameters ◽  
Field Crops ◽  
High Condition

In the article, the results of research on the methodology for conducting studies with corn culture under various methods of sowing and weather conditions. The aim of the research was to establish and evaluate the reliability and high accuracy of the experiment, with a decrease in the area's acreage and taking one plant per repetition. Based on the results of the analysis of biometric parameters and yields, the possibility of sampling from 5 to 108 plants was established statistically and mathematically to establish the accuracy of the experiment. The established parameters of sites in experiments with maize indicate the possibility of obtaining much more information from a smaller unit of area, that is, to increase labor productivity not only with tilled crops. This is the goal of further scientific research with other field crops taking 1 plant of repetitions, observing the conditions of leveling the experimental plot according to the fertility of the soil and sowing seeds with high condition. The data obtained give grounds for continuing research on the minimum space required and the sample in the experiments.

MODELING AND EXPERIMENTAL VERIFICATION OF AIR-THERMAL AND MICROWAVE-CONVECTIVE PRESOWING SEED TREATMENT

2020 ◽  
Vol 4 (41) ◽  
pp. 35-43
Author(s):  
ALEKSEY A. VASIL’EV ◽  
◽  
ALEKSEY N. VASIL’EV ◽  
DMITRIY BUDNIKOV ◽  
ANTON SHARKO
Keyword(s):  
High Frequency ◽  
Seed Treatment ◽  
Field Experiments ◽  
Research Purpose ◽  
Dense Layer ◽  
Technological Equipment ◽  
External Influence ◽  
Ultra High Frequency ◽  
Grain Processing ◽  
Seed Processing

The use of electrophysical influences for pre-sowing treatment of seeds is an effective way to increase their sowing quality. The use of these methods is limited by the fact that their implementation requires new technological equipment in grain processing lines. This problem is solved more easily when pre-sowing processing is performed using installations for active ventilation and grain drying. (Research purpose) The research purpose is in determining the possibility of using active ventilation units and ultra-high-frequency convective grain dryers for pre-sowing grain processing and to evaluating the effectiveness of such processing using computer modeling. (Materials and methods) It is necessary to ensure the uniformity of processing with external influence the seeds placed in a dense layer. Authors carried out pre-sowing treatment of seeds on real installations. Treated seeds were sown in experimental plots and the results of treatment were evaluated. (Results and discussion) The article presents graphs of changes in grain temperature and humidity during processing. To check the feasibility of pre-sowing treatment, authors performed modeling of air-heat and ultra-high-frequency convective seed treatment processes. Based on the results of field experiments, air-heat treatment stimulates the development of secondary plant roots, contributes to an intensive increase in the green mass of plants; ultra-high-frequency convective seed treatment allows increasing the number of productive stems in plants, the number of ears in one plant. (Conclusions) Technological equipment designed for drying and active ventilation of grain can be effectively used for pre-sowing seed processing. In the course of field experiments, it was revealed the possibility of controlling the structure of the crop using different types of external influence on seeds during their pre-sowing processing.

Interference of Three Annual Grasses with Grain Sorghum (Sorghum bicolor)

1990 ◽  
Vol 4 (2) ◽  
pp. 245-249 ◽  
Author(s):  
Brenda S. Smith ◽  
Don S. Murray ◽  
J. D. Green ◽  
Wan M. Wanyahaya ◽  
David L. Weeks
Keyword(s):  
Linear Regression ◽  
Grain Yield ◽  
Field Experiments ◽  
Grain Sorghum ◽  
Grass Species ◽  
Row Spacing ◽  
Yield Data ◽  
Weed Density ◽  
Annual Grasses ◽  
Wide Row Spacing

Barnyardgrass, large crabgrass, and Texas panicum were evaluated in field experiments over 3 yr to measure their duration of interference and density on grain sorghum yield. When grain yield data were converted to a percentage of the weed-free control, linear regression predicted a 3.6% yield loss for each week of weed interference regardless of year or grass species. Grain sorghum grown in a narrow (61-cm) row spacing was affected little by full-season interference; however, in wide (91-cm) rows, interference increased as grass density increased. Data from the wide-row spacing were described by linear regression following conversion of grain yield to percentages and weed density to log10. A separate nonlinear model also was derived which could predict the effect of weed density on grain sorghum yield.

scholarly journals Interaction of dicamba, fluthiacet-methyl, and glyphosate for control of velvetleaf (Abutilon theopharsti) in dicamba/glyphosate-resistant soybean

2021 ◽  
pp. 1-21
Author(s):  
Jose H. S. de Sanctis ◽  
Amit J. Jhala
Keyword(s):  
United States ◽  
Field Experiments ◽  
The United States ◽  
Application Rate ◽  
Herbicide Application ◽  
Soybean Yield ◽  
Agronomic Crops ◽  
Split Plot ◽  
Main Plot ◽  
Biomass Reduction

Abstract Velvetleaf is an economically important weed in agronomic crops in Nebraska and the United States. Dicamba applied alone usually does not provide complete velvetleaf control, particularly when velvetleaf is greater than 15 cm tall. The objectives of this experiment were to evaluate the interaction of dicamba, fluthiacet-methyl, and glyphosate applied alone or in a mixture in two- or three-way combinations for velvetleaf control in dicamba/glyphosate-resistant (DGR) soybean and to evaluate whether velvetleaf height (≤ 12 cm or ≤ 20 cm) at the time of herbicide application influences herbicide efficacy, velvetleaf density, biomass, and soybean yield. Field experiments were conducted near Clay Center, Nebraska in 2019 and 2020. The experiment was arranged in a split-plot with velvetleaf height (≤ 12 cm or ≤ 20 cm) as the main plot treatment and herbicides as sub-plot treatment. Fluthiacet provided ≥ 94% velvetleaf control 28 d after treatment (DAT) and ≥ 96% biomass reduction regardless of application rate or velvetleaf height. Velvetleaf control was 31% to 74% at 28 DAT when dicamba or glyphosate was applied alone to velvetleaf ≤ 20 cm tall compared with 47% to 100% control applied to ≤ 12 cm tall plants. Dicamba applied alone to ≤ 20 cm tall velvetleaf provided < 75% control and < 87% biomass reduction 28 DAT compared with ≥ 90% control with dicamba at 560 g ae ha−1 + fluthiacet at 7.2 g ai ha−1 or glyphosate at 1,260 g ae ha−1. Dicmaba at 280 g ae ha−1 + glyphosate at 630 g ae ha−1 applied to ≤ 20 cm tall velvetleaf resulted in 86% control 28 DAT compared with the expected 99% control. The interaction of dicamba + fluthiacet + glyphosate was additive for velvetleaf control and biomass reduction regardless of application rate and velvetleaf height.

scholarly journals The interaction of seasonal rainfall and nitrogen fertiliser rate on soil N2O emission, total N loss and crop yield of dryland sorghum and sunflower grown on sub-tropical Vertosols

Soil Research ◽  
2016 ◽  
Vol 54 (5) ◽  
pp. 604 ◽  
Author(s):  
G. D. Schwenke ◽  
B. M. Haigh
Keyword(s):  
Crop Yield ◽  
Crop Production ◽  
Field Experiments ◽  
N2o Emission ◽  
N2o Emissions ◽  
N Loss ◽  
N Losses ◽  
Total N ◽  
Tropical Regions ◽  
The Impact

Summer crop production on slow-draining Vertosols in a sub-tropical climate has the potential for large emissions of soil nitrous oxide (N2O) from denitrification of applied nitrogen (N) fertiliser. While it is well established that applying N fertiliser will increase N2O emissions above background levels, previous research in temperate climates has shown that increasing N fertiliser rates can increase N2O emissions linearly, exponentially or not at all. Little such data exists for summer cropping in sub-tropical regions. In four field experiments at two locations across two summers, we assessed the impact of increasing N fertiliser rate on both soil N2O emissions and crop yield of grain sorghum (Sorghum bicolor L.) or sunflower (Helianthus annuus L.) in Vertosols of sub-tropical Australia. Rates of N fertiliser, applied as urea at sowing, included a nil application, an optimum N rate and a double-optimum rate. Daily N2O fluxes ranged from –3.8 to 2734g N2O-Nha–1day–1 and cumulative N2O emissions ranged from 96 to 6659g N2O-Nha–1 during crop growth. Emissions of N2O increased with increased N fertiliser rates at all experimental sites, but the rate of N loss was five times greater in wetter-than-average seasons than in drier conditions. For two of the four experiments, periods of intense rainfall resulted in N2O emission factors (EF, percent of applied N emitted) in the range of 1.2–3.2%. In contrast, the EFs for the two drier experiments were 0.41–0.56% with no effect of N fertiliser rate. Additional 15N mini-plots aimed to determine whether N fertiliser rate affected total N lost from the soil–plant system between sowing and harvest. Total 15N unaccounted was in the range of 28–45% of applied N and was presumed to be emitted as N2O+N2. At the drier site, the ratio of N2 (estimated by difference)to N2O (measured) lost was a constant 43%, whereas the ratio declined from 29% to 12% with increased N fertiliser rate for the wetter experiment. Choosing an N fertiliser rate aimed at optimum crop production mitigates potentially high environmental (N2O) and agronomic (N2+N2O) gaseous N losses from over-application, particularly in seasons with high intensity rainfall occurring soon after fertiliser application.

Participatory soil quality assessment: The case of smallholder farmers in Ethiopian highlands

Soil Research ◽  
2004 ◽  
Vol 42 (7) ◽  
pp. 793 ◽  
Author(s):  
Teklu Erkossa ◽  
Karl Stahr ◽  
Thomas Gaiser
Keyword(s):  
Quality Assessment ◽  
Soil Quality ◽  
Crop Production ◽  
Smallholder Farmers ◽  
Soil Management ◽  
Triticum Aestivum L ◽  
Soil Functions ◽  
Yield Data ◽  
Management Interventions ◽  
Soil Quality Assessment

The study was conducted at Caffee Doonsa (08°88′N, 39°08′E; 2400 m asl), a small watershed in the central highlands of Ethiopia, in order to identify farmers’ goals of soil management and the indicators they use in selecting soils for a certain function, and to categorise the soils in different quality groups with respect to the major functions. Thirty-six male farmers of different age and wealth groups participated in a Participatory Rural Appraisal technique. They listed and prioritised 12 soil functions in the area and itemised the soil quality indicators (characteristics). Based on the indicators, the soils in the watershed were classified into 3 soil quality (SQ) groups (Abolse, Kooticha, and Carii). The SQ groups have been evaluated and ranked for the major soil functions. For crop production, Abolse was graded best, followed by Kooticha and Carii, respectively. The grain and straw yield data of wheat (Triticum aestivum L.) taken from the SQ groups confirmed the farmers claim, in that Abolse gave the highest grain yield (4573 kg/ha), followed by 4411 and 3657 kg/ha for Kooticha and Carii, respectively. Local insights should be included in systematic soil quality assessment, and in planning and implementation of various soil management interventions.

Water demand and water use efficiency of winter barley in Hungary

2011 ◽  
Vol 59 (1) ◽  
pp. 13-22
Author(s):  
Z. Varga-Haszonits ◽  
E. Enzsölné Gerencsér ◽  
Z. Lantos ◽  
Z. Varga
Keyword(s):  
Soil Moisture ◽  
Water Supply ◽  
Water Use Efficiency ◽  
Water Use ◽  
Potential Evapotranspiration ◽  
Growth Period ◽  
Winter Barley ◽  
Potential Yield ◽  
Yield Data ◽  
Use Efficiency

The temporal and spatial variability of soil moisture, evapotranspiration and water use were investigated for winter barley. Evaluations were carried out on a database containing meteorological and yield data from 15 stations. The spatial distribution of soil moisture, evapotranspiration and water use efficiency (WUE) was evaluated from 1951 to 2000 and the moisture conditions during the growth period of winter barley were investigated. The water supply was found to be favourable, since the average values of soil moisture remained above the lower limit of favourable water content throughout the growth period, except for September–December and May–June. The actual evapotranspiration tended to be close to the potential evapotranspiration, so the water supplies were favourable throughout the vegetation period. The calculated values of WUE showed an increasing trend from 1960 to 1990, but the lower level of agricultural inputs caused a decline after 1990. The average values of WUE varied between 0.87 and 1.09 g/kg in different counties, with higher values in the northern part of the Great Hungarian Plain. The potential yield of winter barley can be calculated from the maximum value of WUE. Except in the cooler northern and western parts of the country, the potential yield of winter barley, based on the water supply, could exceed 10 t/ha.

Do applications of sulfur or sulfate influence infestations of root maggots (Delia spp.) (Diptera: Anthomyiidae) in canola?

2002 ◽  
Vol 82 (3) ◽  
pp. 599-610 ◽  
Author(s):  
L. M. Dosdall ◽  
R. -C. Yang ◽  
P. M. Conway
Keyword(s):  
Brassica Rapa ◽  
Field Experiments ◽  
Elemental Sulfur ◽  
Insect Pest ◽  
Soil Surface ◽  
Application Rate ◽  
Delia Radicum ◽  
Application Methods ◽  
Root Maggot ◽  
Sulfur Nutrition

While the importance of sulfur nutrition for the development of healthy stands of canola is well documented, the role of sulfur in the management of insect pest infestations has not previously been investigated in this crop. Field experiments were conducted at three sites in central Alberta in 1997 and 1998 to determine the influence of sulfur and sulfate applications on infestations of root maggots (Delia spp.) (Diptera: Anthomyiidae) in canola (Brassica rapa L.). Different formulations (granules, powder, prills, and sprays), application methods (either drilled in with the seed or top-dressed on the soil surface), and application rates were evaluated. To assess the degree of root maggot infestation, oviposition throughout the season and damage to taproots at the end of the season were monitored. Sulfur contents were analyzed from leaf samples collected mid-season and seed yields were measured from all treatment plots. Root maggot responses to the different sulfur treatments and application methods varied among years and sites, indicating that environmental factors have great importance in determining infestation levels by these pests, and the oxidation rate of elemental sulfur in soil. Sulfur formulation and application rate had significant effects on root maggot egg deposition and root damage for some sites and years, but even at high rates of application (112 kg ha-1) reductions in infestation levels were not substantial relative to the controls. While sulfur additions alone will not greatly reduce root maggot infestation levels in canola, growers should employ adequate sulfur nutrition for optimum crop health to enable plants to better compensate for damage by these pests. Key words: Brassica rapa, Delia radicum, Delia floralis, elemental sulfur, sulfate, canola

Sign in / Sign up

Export Citation Format

Share Document