scholarly journals Biodegradation of High Concentrations of Aliphatic Hydrocarbons in Soil from a Petroleum Refinery: Implications for Applicability of New Actinobacterial Strains

2018 ◽  
Vol 8 (10) ◽  
pp. 1855 ◽  
Author(s):  
Josef Trögl ◽  
Catherine Esuola ◽  
Sylvie Kříženecká ◽  
Pavel Kuráň ◽  
Lenka Seidlová ◽  
...  
Keyword(s):  
Nutrient Medium ◽  
Petroleum Refinery ◽  
Rhodococcus Erythropolis ◽  
Dry Weight ◽  
Aliphatic Hydrocarbons ◽  
Bacillus Sp ◽  
Polluted Soils ◽  
Great Demand ◽  
High Concentrations ◽  
Petroleum Pollutants

At present, there is great demand for new resistant and metabolically active strains of biodegrading bacteria capable of degrading high concentrations of petroleum pollutants. In this study, we undertook a series of pot-based biodegradation experiments on soil from a petroleum refinery lagoon heavily polluted with aliphatic hydrocarbons (81.6 ± 2.5 g·kg−1 dry weight) and metals. Periodical bioaugmentation with either a mixture of isolated degraders identified as Bacillus sp. and Ochrobactrum sp. or biostimulation with nutrient medium, singly or in combination, did not produce any significant decrease in hydrocarbons, even after 455 days. Inoculation with Gordonia rubripertincta CWB2 and Rhodococcus erythropolis S43 in iron-limited media, however, resulted in a significant decrease in hydrocarbons 45 days after bioaugmentation. These actinobacterial strains, therefore, show significant potential for bioremediation of such highly polluted soils.

Potential Contribution of Nutrients and Polycyclic Aromatic Hydrocarbons from the Creeks of Cootes Paradise Marsh

1996 ◽  
Vol 31 (3) ◽  
pp. 485-504 ◽  
Author(s):  
Patricia Chow-Fraser ◽  
Barb Crosbie ◽  
Douglas Bryant ◽  
Brian McCarry
Keyword(s):  
Aromatic Hydrocarbons ◽  
Laboratory Experiments ◽  
Dry Weight ◽  
Common Source ◽  
Potential Contribution ◽  
Nitrogen And Phosphorus ◽  
Engine Combustion ◽  
Polycyclic Aromatic ◽  
High Concentrations ◽  
Derivatives Of

Abstract During the summer of 1994, we compared the physical and nutrient characteristics of the three main tributaries of Cootes Paradise: Spencer, Chedoke and Borer’s creeks. On all sampling occasions, concentrations of CHL α and nutrients were always lowest in Borer’s Creek and highest in Chedoke Creek. There were generally 10-fold higher CHL α concentrations and 2 to 10 times higher levels of nitrogen and phosphorus in Chedoke Creek compared with Spencer Creek. Despite this, the light environment did not differ significantly between Spencer and Chedoke creeks because the low algal biomass in Spencer Creek was balanced by a relatively high loading of inorganic sediments from the watershed. Laboratory experiments indicated that sediments from Chedoke Creek released up to 10 µg/g of soluble phosphorus per gram (dry weight) of sediment, compared with only 2 µg/g from Spencer Creek. By contrast, sediment samples from Spencer Creek contained levels of polycyclic aromatic hydrocarbon that were as high as or higher than those from Chedoke Creek, and much higher than those found in Borer’s Creek. The distribution of normalized PAH concentrations suggests a common source of PAHs in all three tributaries, most likely automobile exhaust, since there were high concentrations of fluoranthene and pyrene, both of which are derivatives of engine combustion.

scholarly journals Temporal and spatial variation on heavy metal concentrations in the oyster Ostrea equestris on the northern coast of Rio de Janeiro State, Brazil

2005 ◽  
Vol 65 (1) ◽  
pp. 67-76 ◽  
Author(s):  
A. G Ferreira ◽  
A. L. S. Machado ◽  
I. R. Zalmon
Keyword(s):  
Heavy Metal ◽  
Spatial Variation ◽  
Rio De Janeiro ◽  
Dry Weight ◽  
Temporal Variations ◽  
Average Concentration ◽  
Northern Coast ◽  
High Concentrations ◽  
Janeiro State ◽  
Ostrea Equestris

Heavy metal (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) concentrations were determined by ICP-AES in Ostrea equestris from three beaches (Barra do Furado, Buena, and Ponta do Retiro) on the northern coast of Rio de Janeiro State. The average concentration was 0.8 ± 0.18, 0.4 ± 0.21, 58 ± 25.6, 249 ± 52.3, 11 ± 1.31, 0.55 ± 0.16, 0.13 ± 0.11, and 1131 ± 321 µg.g-1 dry weight for Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn respectively. Significant spatial variation (p < 0.05) between the samples areas occurred for Cr, Pb, and Zn with higher values in Barra do Furado; and for Cu in Ponta do Retiro. Significant temporal variations (p < 0.05) were observed for all metals except Cu. Temporal variability may be related to changes in the inputs of metals associated with suspended particles. Concentrations were similar to those found in areas under low pollution impact, except for Zn, the high concentrations of which probably reflect the physiological characteristics of these organisms.

scholarly journals Cadmium affects the regeneration of the leafy vegetable Talinum portulacifolium stem cuttings in nutrient solution

2020 ◽  
pp. 147-159
Author(s):  
Thangavelu Muthukumar ◽  
Selvam Dinesh-Babu
Keyword(s):  
Morphological Characteristics ◽  
Dry Weight ◽  
Hydroponic Culture ◽  
Leafy Vegetable ◽  
Regeneration Ability ◽  
Tolerance Index ◽  
Stem Cuttings ◽  
Polluted Soils ◽  
Cd Accumulation ◽  
Plant Parts

Investigamos el efecto de varias concentraciones (0,0-5,0 ppm) de cadmio (Cd) en la capacidad de regeneración; las características morfológicas y la acumulación de Cd en los esquejes de tallo de la verdura de hoja Talinum portulacifolium cultivada en cultivo hidropónico. El Cd retrasó la brotación de los esquejes en un 7%, la callosidad en un 8% y el enraizamiento en un 38%. Las diferentes concentraciones de Cd afectaron significativamente a los pesos fresco y seco de las partes de la planta, excepto las raíces. La acumulación de Cd fue mayor en los tallos que en las hojas (2,22 vs 0,57 ppm). El índice de tolerancia calculado osciló entre el 59% y el 88%. Basándose en las observaciones, se concluyó que el Cd interfiere con la regeneración de los esquejes de tallo de T. portulacifolium e implica preocupación sobre el consumo y el uso terapéutico de esta hortaliza de hoja que crece en suelos contaminados. We investigated the effect of various concentrations (0.0-5.0 ppm) of cadmium (Cd) on the regeneration ability; morphological characteristics and Cd accumulation in the leafy vegetable Talinum portulacifolium stem cuttings grown in hydroponic culture. Cd delayed sprouting of stem cuttings by 7%, callusing by 8% and rooting by 38%. Different Cd concentrations significantly affected fresh and dry weight of plant parts except roots. Accumulation of Cd was more in the stems than in leaves (2.22 vs 0.57 ppm). The calculated tolerance index ranged from 59% to 88%. Based on the observations it was concluded that Cd interferes with the regeneration of T. portulacifolium stem cuttings and imply concerns on the consumption and therapeutic use of this leafy vegetable growing on polluted soils.

scholarly journals Production characteristics of the diatom Cylindrotheca closterium (Ehrenb.) Reimann et Lewin grown in an intensive culture at various nitrogen sources in the medium

2019 ◽  
Vol 4 (1) ◽  
pp. 33-44 ◽  
Author(s):  
S. N. Zheleznova
Keyword(s):  
Stationary Phase ◽  
Nitrogen Source ◽  
Nutrient Medium ◽  
Maximum Yield ◽  
Nitrogen Sources ◽  
Dry Weight ◽  
Sole Source ◽  
Active Growth ◽  
Cylindrotheca Closterium ◽  
Production Characteristics

The diatom Cylindrotheca closterium (Ehrenberg) Reimann et Levin is characterized by high productivity (up to 1.5 g·l-1·day-1) and the ability to accumulate a valuable carotenoid fucoxanthin (up to 2 % of dry weight). In the development of biotechnology based on microalgae, the key issue is the creation of concentrated nutrient medium. Nitrogen is one of the most important components in the nutrient medium that significantly affects the production characteristics of all microalgae. The aim of this study is to compare the production characteristics of C. closterium in an intensive storage culture using different forms of nitrogen in the medium. In the first experiment, nitrate and sodium nitrite, urea, and nitrogen in the form of ammonium were used as a source of nitrogen. The amount of nitrates, nitrites, ammonium, and urea in the medium was calculated from the nitrogen content of the RS nutrient medium, with a nitrogen to phosphorus ratio of 15 : 1. In the second experiment, amino acids were used as a nitrogen source – arginine, asparagine, cysteine. The possibility of using the microalgae C. closterium for the growth of various organic sources of nitrogen (urea, cysteine, asparagine) was shown. Productive characteristics in the intensive storage culture of C. closterium using urea, cysteine, and asparagine as the sole source of nitrogen in the RS nutrient medium were determined. It is shown that when urea was used, the productivity reached its maximum values and amounted to 1.5 g·l-1·day-1. Thus, the expediency of using urea in the medium for obtaining the maximum yield of biomass was shown. The use of cysteine in the stationary phase of growth to achieve a long stationary phase with minimal concentrations of the nitrogen source in the nutrient medium is also advisable. It was found that C. closterium was able to grow and vegetate at sufficiently high concentrations of nitrite, and the addition of nitrogen in ammonium form to the nutrient medium during the active growth of C. closterium led to inhibition of all metabolic processes and to the death of the culture.

scholarly journals PP2A Methylation is Necessary for Broad Stress Tolerance

2021 ◽  
Author(s):  
Maria T. Creighton ◽  
Dugassa Nemie-Feyissa ◽  
Nabeela Zaman ◽  
Sverre S. Johansen ◽  
Hege Dysjaland ◽  
...  
Keyword(s):  
Oxidative Stress ◽  
Stress Tolerance ◽  
Dry Weight ◽  
Sodium Concentration ◽  
Post Translational Modification ◽  
Iron Starvation ◽  
Methyl Transferase ◽  
High Concentrations ◽  
Fe Homeostasis ◽  
Rock Wool

Abstract Background: LEUCINE CARBOXYL METHYL TRANSFERASE 1 (LCMT1) transfers a methyl group from the methyl donor S-adenosylmethionine (SAM) to the catalytic subunit of PROTEIN PHOSPHATASE 2A (PP2A). This post-translational modification of PP2A is manifested throughout eukaryotes from yeast to plants and animals. Although highly conserved, the importance of the methylation is poorly understood. Since Arabidopsis plants with knocked out LCMT1 grow and develop fairly normally, we decided to search for conditions that may reveal the benefits of this regulation. We compared the effects of various stressful conditions on Arabidopsis wild type (WT) and a lcmt1 mutant possessing only non-methylated PP2A. Results: Seedlings were grown in Petri dishes for 5-12 days, or in rock wool and soil for up to 7 weeks. A significant increase in sodium concentration was found for lcmt1 relative to WT, but this was not linked with stressful conditions. Plants were exposed to variable levels of the chelator EDTA, iron, zinc, aluminium, heat, and hydrogen peroxide. The lcmt1 mutant was clearly more sensitive than WT to all the various stresses, as demonstrated by effects on seedling root growth and on shoots of rosette stage plants on rock wool. When omitting EDTA, expression of genes known as signature genes for iron deficiency, FIT1, bHLH100, IMA1, IRT1 was strongly enhanced in lcmt1. Although an iron starvation response was induced, Fe homeostasis was apparently maintained by slowed growth in lcmt1 and the Fe level related to tissue dry weight was not changed. Among genes induced in lcmt1 were also the Zn induced gene ZIF1, and heat shock protein HSP90-1. Concentrations of non-iron transition metals, Cu, Mn and Zn, increased significantly in response to lack of EDTA for both lcmt1 and WT tissue, and especially the growth of lcmt1 was strongly hampered. Conclusions: Presence of the LCMT1 gene was necessary to cope efficiently with an imbalance in the micronutrients, heat stress, and oxidative stress. Methylation of PP2A appears important to ameliorate the toxic effects of metals present in unfavourable high concentrations as well as heat or oxidative stress. The experiments establish LCMT1 as a key component in broad stress tolerance.

Cytochalasin B: Aspects of Phagocytosis in Nutrient Uptake in Tetrahymena

1974 ◽  
Vol 15 (2) ◽  
pp. 403-406
Author(s):  
ELSE K. HOFFMANN ◽  
L. RASMUSSEN ◽  
E. ZEUTHEN
Keyword(s):  
Nutrient Uptake ◽  
Nutrient Medium ◽  
Cytochalasin B ◽  
Tetrahymena Pyriformis ◽  
Food Vacuole ◽  
Vacuole Formation ◽  
Proteose Peptone ◽  
High Concentrations

Cytochalasin B (37 µg per ml) reduces the rate of food vacuole formation, i.e. the rate of phagocytosis, in Tetrahymena pyriformis. Cytochalasin B in this concentration suppresses multiplication rates in a nutrient medium consisting of 2 % proteose peptone, but multiplication is unaffected if this medium is supplemented with glucose and high concentrations of nucleosides. Thus nutrients in high concentrations circumvent the necessity for phagocytosis in Tetrahymena.

Inorganic Bromide in Higher Fungi

1984 ◽  
Vol 39 (9-10) ◽  
pp. 863-866 ◽  
Author(s):  
T. Stijve
Keyword(s):  
Trace Element ◽  
Dry Weight ◽  
Mean Value ◽  
Inorganic Salts ◽  
Chromatographic Methods ◽  
The Mean ◽  
High Concentrations

Abstract A total of 138 samples of higher fungi, representing 35 species (15 belonging to the genus Amanita), were analysed for the trace element bromine using spectrophotometric and gas chromatographic methods. High concentrations of bromine, up to 100 mg/kg on dry weight, were encountered in Amanitaceae, especially in members of the subsections Phalloideae and Eu-Amanita, whereas in other fungi the mean value for this element was only 3,3 m g/kg. Some bromine-accumulating Amanitas also contained unusually high chlorine levels. Am axi­mum concentration of 3 percent on dry weight was measured in A. phalloides. It could be demonstrated that most, if not all of bromine and chlorine was present in the fungi as ionisable inorganic salts. Two organochlorine metabolites, previously reported in some mushrooms, were absent in A. phalloides and A. muscaria.

scholarly journals Physiological Response of Populus balsamifera and Salix eriocephala to Salinity and Hydraulic Fracturing Wastewater: Potential for Phytoremediation Applications

2020 ◽  
Vol 17 (20) ◽  
pp. 7641
Author(s):  
Michael A. Bilek ◽  
Raju Y. Soolanayakanahally ◽  
Robert D. Guy ◽  
Shawn D. Mansfield
Keyword(s):  
Hydraulic Fracturing ◽  
Physiological Response ◽  
Dry Weight ◽  
Populus Balsamifera ◽  
Practical Application ◽  
Polluted Soils ◽  
Native Canadian ◽  
Anthropogenic Soil ◽  
Root Tissues ◽  
Substantial Rise

Natural and anthropogenic soil degradation is resulting in a substantial rise in the extension of saline and industrially-polluted soils. Phytoremediation offers an environmentally and economically advantageous solution to soil contamination. Three growth trials were conducted to assess the stress tolerance of native Canadian genotypes of Populus balsamifera L., Salix eriocephala Michx., and one hybrid willow (S. discolor × S. dasyclados) to salinity and hydraulic fracturing (fracking) wastewater. Thirty-three genotypes were grown in NaCl or fracking wastewater solutions between 0 and 7 mS−1 over a period of 3–4 months. P. balsamifera was observed to be relatively salt-intolerant compared to S. eriocephala and hybrid willow, which is likely caused by an inability of P. balsamifera to restrict Na+ translocation. Photosynthesis and transpiration decreased with salinity treatments, and severe reductions occurred with exposure to fracking solutions. Raffinose and stachyose content was tripled in leaf and root tissues. In willows, Na+ was primarily confined to root tissues, Cl− accumulated up to 5% dry weight in leaves, and K+ was translocated from roots to leaves. Willow genotypes CAM-2 and STL-2 displayed the greatest maintenance of growth and resistance to necrotic symptoms in all trials, suggesting that these genotypes may be useful for practical application and further field study.

Relationships between organic matter composition and methyl mercury content of offshore and carbon-rich littoral sediments in an oligotrophic lake

2003 ◽  
Vol 60 (7) ◽  
pp. 888-896 ◽  
Author(s):  
Martin Kainz ◽  
Marc Lucotte ◽  
Christopher C Parrish
Keyword(s):  
Organic Matter ◽  
Methyl Mercury ◽  
Lacustrine Sediments ◽  
Desulfovibrio Desulfuricans ◽  
Dry Weight ◽  
Mercury Content ◽  
Sulfate Reducing ◽  
Littoral Sediments ◽  
High Concentrations ◽  
Offshore Sediments

Relationships between organic matter (OM) compounds and methyl mercury concentrations ([MeHg]) have been examined in littoral and offshore sediments of Lake Lusignan (Québec). The highest [MeHg] were generally found at the sediment–water interface with exceptionally high concentrations at littoral sites (5.8 ± 1.3 ng·g dry weight–1), which were four times more elevated than at offshore sites (1.6 ± 0.77 ng·g dry weight–1). Source-specific fatty acid (FA) biomarkers identified that littoral sediments contained more than twice as much terrestrial and bacterial OM compounds than offshore sediments, whereas the amount of labile algal OM was three times higher at littoral sites. Results indicate that [MeHg] were higher in the presence of labile OM substrates, and the amount of terrestrial OM compounds could not predict [MeHg]. Correlations between [MeHg] and FA of Desulfovibrio desulfuricans (a sulfate-reducing bacterium producing MeHg) could significantly account for 36% of [MeHg] at offshore sites; however, no significant relationships were found at littoral sites. This study illustrates that the microbial dynamics involved in producing and degrading MeHg in lacustrine sediments are complex and cannot be predicted solely by the quantification of FA biomarkers in D. desulfuricans or by biomarkers in the OM itself.

Burning Nettle, Common Purslane, and Rye Response to a Clove Oil Herbicide

2006 ◽  
Vol 20 (3) ◽  
pp. 646-650 ◽  
Author(s):  
Nathan S. Boyd ◽  
Eric B. Brennan
Keyword(s):  
Weed Management ◽  
Production Systems ◽  
Dry Weight ◽  
Organic Production ◽  
Management Tool ◽  
Vegetable Production ◽  
Clove Oil ◽  
Organic Farms ◽  
High Concentrations ◽  
Common Purslane

Weed management is often difficult and expensive in organic production systems. Clove oil is an essential oil that functions as a contact herbicide and may provide an additional weed management tool for use on organic farms. Burning nettle, purslane, and rye responses to 5, 10, 20, 40, and 80% v/v clove oil mixture applied in spray volumes of 281 and 468 L/ha were examined. Log-logistic curves were fitted to the nettle and purslane data to determine the herbicide dose required to reduce plant dry weight 50% (GR50) and 90% (GR90). A three-parameter Gaussian curve was fitted to the rye data. The GR50 and GR90 were largely unaffected by spray volume. Nettle dry weight was reduced by 90% with 12 to 61 L clove oil/ha, whereas 21 to 38 L clove oil/ha were required to reduce purslane biomass to the same level. Rye was not effectively controlled by clove oil. Clove oil controls broadleaf weeds at high concentrations, but its cost makes broadcast applications prohibitive, even in high-value vegetable production systems.

Sign in / Sign up

Export Citation Format

Share Document