scholarly journals Stability Evaluation and Degradation Studies of DAC® Hyaluronic-Polylactide Based Hydrogel by DOSY NMR Spectroscopy

Biomolecules ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1478
Author(s):  
Tatiana Guzzo ◽  
Fabio Barile ◽  
Cecilia Marras ◽  
Davide Bellini ◽  
Walter Mandaliti ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Nmr Spectroscopy ◽  
Bone Growth ◽  
Orthopedic Implants ◽  
Structured Surfaces ◽  
Physiological Conditions ◽  
Hydrophilic Character ◽  
Dosy Nmr ◽  
The Stability

The stability and the degradation of polymers in physiological conditions are very important issues in biomedical applications. The copolymer of hyaluronic acid and poly-D,L-lactic acid (made available in a product called DAC®) produces a hydrogel which retains the hydrophobic character of the poly-D,L-lactide sidechains and the hydrophilic character of a hyaluronic acid backbone. This hydrogel is a suitable device for the coating of orthopedic implants with structured surfaces. In fact, this gel creates a temporary barrier to bacterial adhesion by inhibiting colonization, thus preventing the formation of the biofilm and the onset of an infection. Reabsorbed in about 72 h after the implant, this hydrogel does not hinder bone growth processes. In the need to assess stability and degradation of both the hyaluronan backbone and of the polylactic chains along time and temperature, we identified NMR spectroscopy as a privileged technique for the characterization of the released species, and we applied diffusion-ordered NMR spectroscopy (DOSY-NMR) for the investigation of molecular weight dispersion. Our diffusion studies of DAC® in physiological conditions provided a full understanding of the product degradation by overcoming the limitations observed in applying classical chromatography approaches by gel permeation UV.

Hydrolysis of ethylenediphosphinetetraacetate anions

1983 ◽  
Vol 48 (6) ◽  
pp. 1552-1557
Author(s):  
Jana Podlahová ◽  
Jaroslav Podlaha
Keyword(s):  
Nmr Spectroscopy ◽  
Aqueous Solutions ◽  
Stability Of Solutions ◽  
Laboratory Temperature ◽  
H Nmr ◽  
Isolation And Characterization ◽  
Acid And Base ◽  
The Stability ◽  
Hydrolysis Of

The anions of ethylenediphosphinetetraacetic acid are hydrolyzed in aqueous solutions at 80 °C in the two following reactions: ((OOCCH2)2PCH2CH2P(CH2COO)2)4- → (OOCCH2(O)HPCH2CH2PH(O)CH2COO)2- → (O(O)HPCH2CH2PH(O)O)2-. Both reactions are acid and base catalyzed so that, at pH < 12, the first reaction is much faster than the second. The reaction course was studied by 1H NMR spectroscopy and by isolation and characterization of the products. The effect of both reactions on the stability of solutions of ethylenediphosphinetetraacetic acid and their salts is negligible at laboratory temperature.

TEM characterization of Au/Polysilicon interactions

1990 ◽  
Vol 48 (4) ◽  
pp. 650-651
Author(s):  
N. David Theodore ◽  
Leslie H. Allen ◽  
C. Barry Carter ◽  
James W. Mayer
Keyword(s):  
Solid Phase ◽  
Single Crystal Silicon ◽  
Chemical Vapor ◽  
Electrical Contacts ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Transmission Electron ◽  
Polysilicon Films ◽  
The Stability

Metal/polysilicon investigations contribute to an understanding of issues relevant to the stability of electrical contacts in semiconductor devices. These investigations also contribute to an understanding of Si lateral solid-phase epitactic growth. Metals such as Au, Al and Ag form eutectics with Si. reactions in these metal/polysilicon systems lead to the formation of large-grain silicon. Of these systems, the Al/polysilicon system has been most extensively studied. In this study, the behavior upon thermal annealing of Au/polysilicon bilayers is investigated using cross-section transmission electron microscopy (XTEM). The unique feature of this system is that silicon grain-growth occurs at particularly low temperatures ∽300°C).Gold/polysilicon bilayers were fabricated on thermally oxidized single-crystal silicon substrates. Lowpressure chemical vapor deposition (LPCVD) at 620°C was used to obtain 100 to 400 nm polysilicon films. The surface of the polysilicon was cleaned with a buffered hydrofluoric acid solution. Gold was then thermally evaporated onto the samples.

Removal of Hydrophobic and Hydrophilic Constituents by Anion Exchange Resin

1999 ◽  
Vol 40 (9) ◽  
pp. 207-214 ◽  
Author(s):  
J.-P. Croué ◽  
D. Violleau ◽  
C. Bodaire ◽  
B. Legube
Keyword(s):  
Molecular Weight ◽  
Anion Exchange ◽  
Water Source ◽  
Atomic Ratio ◽  
Size Exclusion ◽  
Salting Out ◽  
Anion Exchange Resins ◽  
Hydrophilic Character ◽  
Exchange Resins

The objective of this work was to compare the affinity of well characterized NOM fractions isolated from two surface waters with strong (gel matrix and macroporous matrix) and weak anion exchange resins (AER) using batch experiment conditions. The structural characterization of the fraction of NOM has shown that the higher the hydrophilic character, the lower the C/O atomic ratio, the lower the SUVA, the lower the aromatic carbon content and the lower the molecular weight. In general (not always), strong AER was more efficient to remove DOC than weak AER. For the same water source (Suwannee River), the higher the molecular weight of the NOM fraction, the lower the affinity with AER. Increasing the ionic strength favored the removal of the hydrophobic NOM fraction (“salting out” effect) while increasing the pH apparently reduced the removal of the hydrophilic NOM fraction. Results were discussed in terms of size exclusion, adsorption, anion exchange and also hydrophobic/hydrophilic repulsion.

Preparation and Characterization of β-glucosidase Films for Stabilization and Handling in Dry Configurations

2020 ◽  
Vol 21 (8) ◽  
pp. 741-747
Author(s):  
Liguang Zhang ◽  
Yanan Shen ◽  
Wenjing Lu ◽  
Lengqiu Guo ◽  
Min Xiang ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Protein Function ◽  
Protein Stabilization ◽  
Functional Protein ◽  
Elongation At Break ◽  
Gelatin Films ◽  
The Stability ◽  
And Function ◽  
General Method

Background: Although the stability of proteins is of significance to maintain protein function for therapeutical applications, this remains a challenge. Herein, a general method of preserving protein stability and function was developed using gelatin films. Method: Enzymes immobilized onto films composed of gelatin and Ethylene Glycol (EG) were developed to study their ability to stabilize proteins. As a model functional protein, β-glucosidase was selected. The tensile properties, microstructure, and crystallization behavior of the gelatin films were assessed. Result: Our results indicated that film configurations can preserve the activity of β-glucosidase under rigorous conditions (75% relative humidity and 37°C for 47 days). In both control films and films containing 1.8 % β-glucosidase, tensile strength increased with increased EG content, whilst the elongation at break increased initially, then decreased over time. The presence of β-glucosidase had a negligible influence on tensile strength and elongation at break. Scanning electron-microscopy (SEM) revealed that with increasing EG content or decreasing enzyme concentrations, a denser microstructure was observed. Conclusion: In conclusion, the dry film is a promising candidate to maintain protein stabilization and handling. The configuration is convenient and cheap, and thus applicable to protein storage and transportation processes in the future.

Preparation and Characterization of the High Molecular Weight [3H]Hyaluronic Acid

1992 ◽  
Vol 57 (10) ◽  
pp. 2151-2156 ◽  
Author(s):  
Peter Chabreček ◽  
Ladislav Šoltés ◽  
Hynek Hradec ◽  
Jiří Filip ◽  
Eduard Orviský
Keyword(s):  
Molecular Weight ◽  
Hyaluronic Acid ◽  
High Molecular Weight ◽  
Methyl Bromide ◽  
High Performance ◽  
Hydrogen Atoms ◽  
Isolation And Characterization ◽  
Labelling Procedure ◽  
Enzymatic Depolymerization

Two methods for the preparation of high molecular weight [3H]hyaluronic acid were investigated. In the first one, hydrogen atoms in the molecule were replaced by tritium. This isotopic substitution was performed in aqueous solution using Pd/CaCO3 as the catalyst. In the second method, the high molecular weight hyaluronic acid was alkylated with [3H]methyl bromide in liquid ammonia at a temperature of -33.5 °C. High-performance gel permeation chromatographic separation method was used for the isolation and characterization of the high molecular weight [3H]hyaluronic acid. Molecular weight parameters for the labelled biopolymers were Mw = 128 kDa, Mw/Mn = 1.88 (first method) and Mw = 268 kDa, Mw/Mn = 1.55 (second method). The high molecular weight [3H]hyaluronic acid having Mw = 268 kDa was degraded further by specific hyaluronidase. Products of the enzymatic depolymerization were observed to be identical for both, labelled and cold biopolymer. This finding indicates that the described labelling procedure using [3H]methyl bromide does not induce any major structural rearrangements in the molecule.

scholarly journals Toward Physicochemical and Rheological Characterization of Different Injectable Hyaluronic Acid Dermal Fillers Cross-Linked with Polyethylene Glycol Diglycidyl Ether

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 948
Author(s):  
Nicola Zerbinati ◽  
Sabrina Sommatis ◽  
Cristina Maccario ◽  
Maria Chiara Capillo ◽  
Giulia Grimaldi ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Polyethylene Glycol ◽  
Biological Activities ◽  
Diglycidyl Ether ◽  
Dermal Filler ◽  
Cross Linking ◽  
Matrix Structure ◽  
Dermal Fillers ◽  
Rheological Characterization

(1) Background: Injectable hyaluronic acid (HA) dermal fillers are used to restore volume, hydration and skin tone in aesthetic medicine. HA fillers differ from each other due to their cross-linking technologies, with the aim to increase mechanical and biological activities. One of the most recent and promising cross-linkers is polyethylene glycol diglycidyl ether (PEGDE), used by the company Matex Lab S.p.A., (Brindisi, Italy) to create the HA dermal filler PEGDE family. Over the last few years, several studies have been performed to investigate the biocompatibility and biodegradability of these formulations, but little information is available regarding their matrix structure, rheological and physicochemical properties related to their cross-linking technologies, the HA content or the degree of cross-linking. (2) Methods: Seven different injectable HA hydrogels were subjected to optical microscopic examination, cohesivity evaluation and rheological characterization in order to investigate their behavior. (3) Results: The analyzed cross-linked dermal fillers showed a fibrous “spiderweb-like” matrix structure, with each medical device presenting different and peculiar rheological features. Except for HA non cross-linked hydrogel 18 mg/mL, all showed an elastic and cohesive profile. (4) Conclusions: The comparative analysis with other literature works makes a preliminary characterization of these injectable medical devices possible.

scholarly journals The Bone Buttress Theory: The Effect of the Mechanical Loading of Bone on the Osseointegration of Dental Implants

Biology ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 12
Author(s):  
David Chavarri-Prado ◽  
Aritza Brizuela-Velasco ◽  
Ángel Álvarez-Arenal ◽  
Markel Dieguez-Pereira ◽  
Esteban Pérez-Pevida ◽  
...  
Keyword(s):  
Dental Implants ◽  
Mechanical Loading ◽  
Bone Growth ◽  
Bone Matrix ◽  
Test Group ◽  
Control Group ◽  
Group A ◽  
Bone To Implant Contact ◽  
The Stability ◽  
Group B

Objectives: To determine the effect of mechanical loading of bone on the stability and histomorphometric variables of the osseointegration of dental implants using an experimental test in an animal model. Materials and Methods: A total of 4 human implants were placed in both tibiae of 10 New Zealand rabbits (n = 40). A 6-week osseointegration was considered, and the rabbits were randomly assigned to two groups: Group A (Test group) included 5 rabbits that ran on a treadmill for 20 min daily during the osseointegration period; Group B (Controls) included the other 5 that were housed conventionally. The monitored variables were related to the primary and secondary stability of the dental implants (implant stability quotient—ISQ), vertical bone growth, bone to implant contact (BIC), area of regenerated bone and the percentage of immature matrix. Results: The results of the study show a greater vertical bone growth (Group A 1.26 ± 0.48 mm, Group B 0.32 ± 0.47 mm, p < 0.001), higher ISQ values (Group A 11.25 ± 6.10 ISQ, 15.73%; Group B 5.80 ± 5.97 ISQ, 7.99%, p = 0.006) and a higher BIC (Group A 19.37%, Group B 23.60%, p = 0.0058) for implants in the test group, with statistically significant differences. A higher percentage of immature bone matrix was observed for implants in the control group (20.68 ± 9.53) than those in the test group (15.38 ± 8.84) (p = 0.108). A larger area of regenerated bone was also observed for the test implants (Group A 280.50 ± 125.40 mm2, Group B 228.00 ± 141.40 mm2), but it was not statistically significant (p = 0.121). Conclusions: The mechanical loading of bone improves the stability and the histomorphometric variables of the osseointegration of dental implants.

Sign in / Sign up

Export Citation Format

Share Document