scholarly journals Synthesis of Conducting Bifunctional Polyaniline@Mn-TiO2 Nanocomposites for Supercapacitor Electrode and Visible Light Driven Photocatalysis

Catalysts ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 546 ◽  
Author(s):  
Milan Babu Poudel ◽  
Changho Yu ◽  
Han Joo Kim
Keyword(s):  
Tio2 Nanoparticles ◽  
Electrochemical Impedance ◽  
Oxidative Polymerization ◽  
Synergetic Effect ◽  
Band Gap Energy ◽  
Charge Transfer Resistance ◽  
Visible Spectroscopy ◽  
Supercapacitor Electrode ◽  
Transfer Resistance ◽  
Uv Visible

We report a polyaniline-wrapped, manganese-doped titanium oxide (PANi/Mn-TiO2) nanoparticle composite for supercapacitor electrode and photocatalytic degradation. The PANi/Mn-TiO2 nanoparticles were synthesized using a solvothermal process, followed by oxidative polymerization of aniline. The structural properties of studied materials were confirmed by XRD, FTIR, HRTEM, FESEM, and UV visible spectroscopy. The as-prepared PANi/Mn-TiO2 nanoparticles revealed admirable electrochemical performance with a specific capacitance of 635.87 F g−1 at a current density of 1 A g−1 with a notable life cycle retention of 91% after 5000 charge/discharge cycles. Furthermore, the asymmetric cell with PANi/Mn-TiO2 as a positive electrode exhibited energy density of 18.66 W h kg−1 with excellent stability. Moreover, the PANi/Mn-TiO2 had promising photocatalytic activity for methylene blue degradation. The improved performance of PANi/Mn-TiO2 nanoparticles is attributed to the well-built synergetic effect of components that lead to significant reduction of band gap energy and charge transfer resistance, as revealed by UV visible spectroscopy and electrochemical impedance spectroscopy.

scholarly journals Influence of HAP on the Morpho-Structural Properties and Corrosion Resistance of ZrO2-Based Composites for Biomedical Applications

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 202
Author(s):  
Réka Barabás ◽  
Carmen Ioana Fort ◽  
Graziella Liana Turdean ◽  
Liliana Bizo
Keyword(s):  
Electrochemical Impedance ◽  
Artificial Saliva ◽  
Synergetic Effect ◽  
Composite Layer ◽  
Charge Transfer Resistance ◽  
Processing Route ◽  
Dental Alloys ◽  
Metallic Electrode ◽  
Transfer Resistance ◽  
X Ray

In the present work, ZrO2-based composites were prepared by adding different amounts of antibacterial magnesium oxide and bioactive and biocompatible hydroxyapatite (HAP) to the inert zirconia. The composites were synthesized by the conventional ceramic processing route and morpho-structurally analyzed by X-ray powder diffraction (XRPD) and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). Two metallic dental alloys (i.e., Ni–Cr and Co–Cr) coated with a chitosan (Chit) membrane containing the prepared composites were exposed to aerated artificial saliva solutions of different pHs (i.e., 4.3, 5, 6) and the corrosion resistances were investigated by electrochemical impedance spectroscopy technique. The obtained results using the two investigated metallic dental alloys shown quasi-similar anticorrosive properties, having quasi-similar charge transfer resistance, when coated with different ZrO2-based composites. This behavior could be explained by the synergetic effect between the diffusion process through the Chit-composite layer and the roughness of the metallic electrode surface.

Effect of Plating Solutions on Supercapacitor Characteristics of MnO2 Films

2010 ◽  
Vol 113-116 ◽  
pp. 1810-1813
Author(s):  
Fang Xiao ◽  
You Long Xu
Keyword(s):  
Electrode Materials ◽  
Electrochemical Impedance ◽  
Equivalent Circuit Model ◽  
Active Surface ◽  
Charge Transfer Resistance ◽  
Electrochemical Impedance Spectrum ◽  
Active Surface Area ◽  
Cyclic Voltammograms ◽  
Supercapacitor Electrode ◽  
Transfer Resistance

MnO2 films were electrodeposited on the Ti substrates by galvanostatic method in various plating solutions, which was MnCl2, Mn(NO3)2, MnSO4 and Mn(CH3COO)2 solutions, respectively. On X-ray diffraction test, Crystal structures of all MnO2 films were associated to α-MnO2 of tetragonal crystal system. Scanning electron microscopy results show that morphologies of MnO2 films were clearly different. Among them, MnO2 film prepared in Mn(CH3COO)2 solution presented a lot of cracks and holes. According to electrochemical impedance spectrum analysis, this MnO2 film presents the lowest charge-transfer resistance. Additionally, electrochemical active surface areas of MnO2 films were calculated on the basis of equivalent circuit model for impedance data. The result was found that MnO2 film prepared in Mn(CH3COO)2 solution showed the biggest electrochemical active surface area, which was about 382 cm2. Cyclic voltammograms were carried out for all the samples. MnO2 film formed in Mn(CH3COO)2 solution showed the highest special capacitance of 230 F g-1. The results suggest that Mn(CH3COO)2 solution is suitable for electrodepositing MnO2 film using supercapacitor electrode materials.

Preparation and electrochemical characterization of PANI/MnCo2O4 nanocomposite as supercapacitor electrode material

2018 ◽  
Vol 96 (5) ◽  
pp. 477-483 ◽  
Author(s):  
Saeid Panahi ◽  
Moosa Es’haghi
Keyword(s):  
Specific Capacitance ◽  
Surface Characterization ◽  
Electrochemical Impedance ◽  
Rate Capability ◽  
Cycling Performance ◽  
Charge Transfer Resistance ◽  
X Ray Diffraction ◽  
Supercapacitor Electrode ◽  
Transfer Resistance

In this work, PANI/MnCo2O4 nanocomposite was prepared via in-situ chemical polymerization method. Materials synthesized were characterized by FTIR spectroscopy, X-ray diffraction, and scanning electron spectroscopy. In addition, surface characterization of samples such as specific surface area, pore volume, and pore size distribution was studied. Supercapacitor capability of materials was investigated in 1 mol L–1 Na2SO4 solution using cyclic voltammetry in different potential scan rates and electrochemical impedance spectroscopy (EIS). The specific capacitance of materials was calculated, and it was observed that the specific capacitance of PANI/MnCo2O4 nanocomposite was 185 F g−1, much larger than PANI. Moreover, the prepared nanocomposite exhibited better rate capability in scan rate of 100 mV s−1 with respect to PANI. The EIS experiments revealed that the nanocomposite has lower charge transfer resistance compared with pure PANI. Subsequently, it was shown that the nanocomposite cycling performance was superior to the PANI cycling performance.

scholarly journals PANI-Ag-Cu Nanocomposite Thin Films Based Impedimetric Microbial Sensor for Detection ofE. coliBacteria

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Huda Abdullah ◽  
Norshafadzila Mohammad Naim ◽  
Noor Azwen Noor Azmy ◽  
Aidil Abdul Hamid
Keyword(s):  
Thin Films ◽  
Electrochemical Impedance ◽  
Oxidative Polymerization ◽  
Face Centered Cubic ◽  
Cu Nanoparticles ◽  
Visible Spectroscopy ◽  
High Concentration ◽  
E Coli ◽  
Nanocomposite Thin Films ◽  
Uv Visible

PANI-Ag-Cu nanocomposite thin films were prepared by sol-gel method and deposited on the glass substrate using spin coating technique. Polyaniline was synthesized by chemical oxidative polymerization of aniline monomer in the presence of nitric acid. The films were characterized using XRD, FTIR, and UV-Visible spectroscopy. The performance of the sensor was conducted using electrochemical impedance spectroscopy to obtain the change in impedance of the sensor film before and after incubation withE. colibacteria in water. The peaks in XRD pattern confirm the presence of Ag and Cu nanoparticles in face-centered cubic structure. FTIR analysis shows the stretching of N–H in the polyaniline structure. The absorption band from UV-Visible spectroscopy shows high peaks between 400 nm and 500 nm which indicate the presence of Ag and Cu nanoparticles, respectively. Impedance analysis indicates that the change in impedance of the films decreases with the presence ofE. coli. The sensitivity onE. coliincreases for the sample with high concentration of Cu.

A Comparative Study on Substituted Polyanilines for Supercapacitors

2012 ◽  
Vol 1388 ◽  
Author(s):  
Punya A. Basnayaka ◽  
Farah Alvi ◽  
Manoj K. Ram ◽  
Robert Tufts ◽  
Ashok Kumar
Keyword(s):  
Electron Microscopy ◽  
Specific Capacitance ◽  
Electrochemical Impedance ◽  
Oxidative Polymerization ◽  
Visible Spectroscopy ◽  
Transmission Electron ◽  
Impedance Characteristics ◽  
Uv Visible ◽  
Polymerization Method ◽  
Supercapacitor Applications

ABSTRACTThe effect of two substituent groups, ortho-methoxy (-OCH3) and methyl (-CH3) in aniline, have been studied for supercapacitor applications. The polyaniline (PANI), poly (o-anisidine) (POA) and poly (o-toluidine) (POT) have been synthesized by oxidative polymerization method, and characterized by Cyclic Voltammetry (CV), UV–visible spectroscopy, Raman spectroscopy, Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) techniques. The specific capacitance, charging/discharging and electrochemical impedance characteristics of the supercapacitor fabricated using PANI, POA, as well as POT electrodes are evaluated in 2M H2SO4 electrolytic media. The highest specific capacitance of 400 F/g is calculated for PANI, whereas, POA and POT have exhibited 360 F/g and 325 F/g capacitance in supercapacitor studies.

Improvement of Ti/RuO2–IrO2 Anode Lifetime and Electrocatalytical Properties by Using an Eco-Friendly Thermal Decomposition Method Using Polyvinyl Alcohol as Solvent

2019 ◽  
Author(s):  
Charlys Bezerra ◽  
Géssica Santos ◽  
Marilia Pupo ◽  
Maria Gomes ◽  
Ronaldo Silva ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Polyvinyl Alcohol ◽  
High Efficiency ◽  
Electrochemical Impedance ◽  
Pechini Method ◽  
Low Cost ◽  
Charge Transfer Resistance ◽  
Transfer Resistance ◽  
Calcination Temperatures ◽  
Service Lifetime

<p>Electrochemical oxidation processes are promising solutions for wastewater treatment due to their high efficiency, easy control and versatility. Mixed metal oxides (MMO) anodes are particularly attractive due to their low cost and specific catalytic properties. Here, we propose an innovative thermal decomposition methodology using <a>polyvinyl alcohol (PVA)</a> as a solvent to prepare Ti/RuO<sub>2</sub>–IrO<sub>2</sub> anodes. Comparative anodes were prepared by conventional method employing a polymeric precursor solvent (Pechini method). The calcination temperatures studied were 300, 400 and 500 °C. The physical characterisation of all materials was performed by X-ray diffraction and scanning electron microscopy coupled with energy dispersive spectroscopy, while electrochemical characterisation was done by cyclic voltammetry, accelerated service lifetime and electrochemical impedance spectroscopy. Both RuO<sub>2</sub> and IrO<sub>2</sub> have rutile-type structures for all anodes. Rougher and more compact surfaces are formed for the anodes prepared using PVA. Amongst temperatures studied, 300 °C using PVA as solvent is the most suitable one to produce anodes with expressive increase in voltammetric charge (250%) and accelerated service lifetime (4.3 times longer) besides reducing charge-transfer resistance (8 times lower). Moreover, the electrocatalytic activity of the anodes synthesised with PVA toward the Reactive Blue 21 dye removal in chloride medium (100 % in 30 min) is higher than that prepared by Pechini method (60 min). Additionally, the removal total organic carbon point out improved mineralisation potential of PVA anodes. Finally, this study reports a novel methodology using PVA as solvent to synthesise Ti/RuO<sub>2</sub>–IrO<sub>2</sub> anodes with improved properties that can be further extended to synthesise other MMO compositions.</p>

scholarly journals Electrochemical Immunosensor for the Quantification of S100B at Clinically Relevant Levels Using a Cysteamine Modified Surface

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 1929
Author(s):  
Alexander Rodríguez ◽  
Francisco Burgos-Flórez ◽  
José D. Posada ◽  
Eliana Cervera ◽  
Valtencir Zucolotto ◽  
...  
Keyword(s):  
Frequency Analysis ◽  
Surface Characterization ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Neuronal Damage ◽  
Charge Transfer Resistance ◽  
Single Frequency ◽  
Response Analysis ◽  
Transfer Resistance ◽  
Therapeutic Decisions

Neuronal damage secondary to traumatic brain injury (TBI) is a rapidly evolving condition, which requires therapeutic decisions based on the timely identification of clinical deterioration. Changes in S100B biomarker levels are associated with TBI severity and patient outcome. The S100B quantification is often difficult since standard immunoassays are time-consuming, costly, and require extensive expertise. A zero-length cross-linking approach on a cysteamine self-assembled monolayer (SAM) was performed to immobilize anti-S100B monoclonal antibodies onto both planar (AuEs) and interdigitated (AuIDEs) gold electrodes via carbonyl-bond. Surface characterization was performed by atomic force microscopy (AFM) and specular-reflectance FTIR for each functionalization step. Biosensor response was studied using the change in charge-transfer resistance (Rct) from electrochemical impedance spectroscopy (EIS) in potassium ferrocyanide, with [S100B] ranging 10–1000 pg/mL. A single-frequency analysis for capacitances was also performed in AuIDEs. Full factorial designs were applied to assess biosensor sensitivity, specificity, and limit-of-detection (LOD). Higher Rct values were found with increased S100B concentration in both platforms. LODs were 18 pg/mL(AuES) and 6 pg/mL(AuIDEs). AuIDEs provide a simpler manufacturing protocol, with reduced fabrication time and possibly costs, simpler electrochemical response analysis, and could be used for single-frequency analysis for monitoring capacitance changes related to S100B levels.

scholarly journals Corrosion behaviors of 316 stainless steel and Inconel 625 alloy in chloride molten salts for solar energy storage

2020 ◽  
Vol 39 (1) ◽  
pp. 340-350
Author(s):  
Mingjing Wang ◽  
Song Zeng ◽  
Huihui Zhang ◽  
Ming Zhu ◽  
Chengxin Lei ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Molten Salt ◽  
Electrochemical Impedance ◽  
Charge Transfer Resistance ◽  
Inconel 625 ◽  
Transfer Resistance ◽  
316 Stainless Steel ◽  
Corrosion Rates ◽  
Inconel 625 Alloy ◽  
Corrosion Behaviors

AbstractCorrosion behaviors of 316 stainless steel (316 ss) and Inconel 625 alloy in molten NaCl–KCl–ZnCl2 at 700°C and 900°C were investigated by immersion tests and electrochemical methods, including potentiodynamic polarization and electrochemical impedance spectroscopy. X-ray diffraction and scanning electron microscopy/energy dispersive spectroscopy were used to analyze the phases and microstructures of the corrosion products. Inconel 625 alloy and 316 ss exhibited high corrosion rates in molten chlorides, and the corrosion rates of these two alloys accelerated when the temperature increased from 700°C to 900°C. The results of the electrochemical tests showed that both alloys exhibited active corrosion in chloride molten salt, and the current density of 316 ss in chloride molten salt at 700°C was 2.756 mA/cm−2, which is about three times the value for Inconel 625 alloy; and the values of the charge transfer resistance (Rt) for Inconel 625 were larger than those for 316 ss. The corrosion of these two alloys is owing to the preferred oxidation of Cr in chloride molten salt, and the corrosion layer was mainly ZnCr2O4 which was loose and porous and showed poor adherence to metal.

scholarly journals Combined Experimental and Theoretical Insights into the Corrosion Inhibition Activity on Carbon Steel Iron of Phosphonic Acids

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 135
Author(s):  
Aurelia Visa ◽  
Nicoleta Plesu ◽  
Bianca Maranescu ◽  
Gheorghe Ilia ◽  
Ana Borota ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Density Functional ◽  
Energy Gap ◽  
Electrochemical Impedance ◽  
Charge Transfer Resistance ◽  
Phosphonic Acids ◽  
Transfer Resistance ◽  
Potential Map ◽  
Chlorine Ions

The inhibition effect of N,N′-phosphonomethylglycine (PMG) and vinyl phosphonic acid (VPA) on the 3% NaCl acidic solution corrosion of carbon steel iron was studied at different immersion times by potentiodynamic polarization, electrochemical impedance spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and computational methods. It is found from the polarization studies that PMG and VPA behave as mixed-type inhibitors in NaCl. Values of charge transfer resistance (Rct) and double layer capacitance (Cdl) in the absence and presence of inhibitors are determined. The PMG and VPA inhibitors were capable of inhibiting the corrosion process up to ≈91% and ≈85%, respectively. In the presence of PMG, the synergic effect of chlorine ions was observed. Density functional theory (DFT) was engaged to establish the adsorption site of PMG, VPA, and their deprotonated states. For studied compounds, the resulted values of ELUMO, EHOMO, energy gap (∆E), dipole moment (μ), electronic hardness (η), global softness (σ), electrophilic index (ω), and the electronic potential map are in concordance with the experimental data results regarding their corrosion inhibition behavior and adsorption on the metal surface.

Sign in / Sign up

Export Citation Format

Share Document