scholarly journals Curcuma longa Mediated Synthesis of Copper Oxide, Nickel Oxide and Cu-Ni Bimetallic Hybrid Nanoparticles: Characterization and Evaluation for Antimicrobial, Anti-Parasitic and Cytotoxic Potentials

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 849
Author(s):  
Shah Faisal ◽  
Najlaa S. Al-Radadi ◽  
Hasnain Jan ◽  
Abdullah ◽  
Sajjad Ali Shah ◽  
...  

Nanoparticles have long been known and their biomedical potent activities have proven that these can provide an alternative to other drugs. In the current study, copper oxide, nickel oxide and copper/nickel hybrid NPs were biosynthesized by using Curcuma longa root extracts as a reducing and capping agent, followed by characterization via UV-spectroscopy, Fourier transformed infrared spectroscopy (FTIR), energy dispersive X-ray (EDX), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermo galvanometric analysis (TGA), and band gap. FTIR spectroscopy shows the availability of various functional groups and biomolecules such as carbohydrate, protein, polysaccharides, etc. The EDX peak confirmed that the elemental nickel and copper were present in large quantity in the analyzed sample. Scanning electron micrographs showed that the synthesized CuO-NPs and NiO-NPs were polyhedral uniform and homogeneous in morphology, while the copper/nickel hybrid NPs were well dispersed, spherical in shape, and uniform in size. TEM micrographs of CuO-NPs had 27.72 nm, NiO had 23.13 nm and, for their hybrid, the size was 17.38 nm, which was confirmed respectively. The CuO and NiO NPs possessed spherical- to multi-headed shapes, while their hybrid showed a complete spherical shape, small size, and polydispersed NPs. The XRD spectra revealed that the average particle size for CuO, NiO, and hybrid were 29.7 nm, 28 nm and 27 nm, respectively. Maximum anti-diabetic inhibition of (52.35 ± 0.76: CuO-NPs, 68.1 ± 0.93: NiO-NPs and 74.23 ± 0.42: Cu + Ni hybrids) for α-amylase and (39.25 ± 0.18 CuO-NPs, 52.35 ± 1.32: NiO-NPs and 62.32 ± 0.48: Cu + Ni hybrids) for α-glucosidase were calculated, respectively, at 400 µg/mL. The maximum antioxidants capacity was observed as 65.1 ± 0.83 μgAAE/mg for Cu-Ni hybrids, 58.39 ± 0.62 μgAAE/mg for NiO-NPs, and 52.2 ± 0.31 μgAAE/mg for CuO-NPs, respectively, at 400 μg/mL. The highest antibacterial activity of biosynthesized NPs was observed against P. aeuroginosa (28 ± 1.22) and P. vulgaris (25 ± 1.73) for Cu + Ni hybrids, respectively. Furthermore, the antibiotics were coated with NPs, and activity was noted. Significant anti-leishmanial activity of 60.5 ± 0.53 and 68.4 ± 0.59 for Cu + Ni hybrids; 53.2 ± 0.48 and 61.2 ± 0.44 for NiO-NPs; 49.1 ± 0.39 and 56.2 ± 0.45 for CuO-NPs at 400 μg/mL were recorded for promastigote and amastigotes, respectively. The biosynthesized NPs also showed significant anti-cancerous potential against HepG2 cell lines. It was concluded from the study that NPs are potential agents to be used as an alternative to antimicrobial agents.

2020 ◽  
Vol 35 (4-5) ◽  
pp. 389-398
Author(s):  
Tarık Eren ◽  
Gülay Baysal ◽  
Faik Doğan

There is a growing interest in new type of biocidal compounds with antibacterial properties against bacteria. In this study, new antibacterial synthetic materials bearing curcumin and cationic polymers were synthesized. In the synthesis stage, the methacrylate functional cationic monomer was synthesized via the Michael addition route by using 3-acryloxy-2-hydroxypropyl methacrylate and 3-amino pyridine to obtain Monomer 1. Monomer 1 was further quaternized with hexyl bromide to obtain a cationic methacrylate functional monomer. Free-radical polymerization of Monomer 1 and methyl acrylate was conducted in the presence of azobisisobutyronitrile under dimethylformamide solvent. The composite formulation was conducted by using turmeric extract Curcuma longa (curcumin), hydroxyapatite, montmorillonite, and silver nitrate. The materials were analyzed by using the methods of X-ray diffraction, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and scanning electron microscopy. The biocidal activities against the bacteria Escherichia coli, Listeria monocytogenes, Salmonella, and Staphylococcus aureus were analyzed using agar well diffusion method. From the Fourier transform infrared, X-ray diffraction, and scanning electron microscopy analysis results of the synthesized nanocomposites, it is seen that they form strong connections with the components added to the composites and form an exfoliated structure. According to the antibacterial analysis results, the nanocomposites obtained have showed a strong antibacterial resistance against E.coli, L.monocytogenes, Salmonella, and S. aureus bacteria, and the high inhibition zone areas were obtained.


2020 ◽  
Vol 44 (7-8) ◽  
pp. 471-474
Author(s):  
Azadeh Jafari ◽  
SAA Terohid ◽  
Alireza Kokabi ◽  
Amir Moradiani

Using a direct oxidation method in a horizontal quartz tube, copper oxide nanowires are grown on a Cu substrate. In order to investigate the growth temperature effects on the structural, morphological, electrical, and photocatalytic properties of the copper oxide nanowires, X-ray diffraction, scanning electron microscopy, a KEITHLEY 2361 system, and a homemade photoreactor are used. The X-ray diffraction results show that both CuO and Cu2O phases are formed, and while increasing the growth temperature, the crystallinity is improved and the intensity of most of the diffraction peaks increases. The scanning electron microscopy images at different growth temperatures show that the number, density, and length of the copper oxide nanowires on pre-formed micro-scaled grains increase, when the growth temperature increases to 700°C and sharper nanowires with average diameters of 1–3 µm grow on the surface. Also I–V curves show that by raising the growth temperature, the conductivity of the samples increases. In addition, the photocatalytic activities are studied by photocatalytic degradation of Congo red dye, and based on these results, the sample grown at 700°C with the highest number and density of the nanowires showed the best photocatalytic performance and electrical conductivity. The results can be used to guide better understanding of the growth behavior of copper oxide nanowires and can be useful for the development of novel photocatalytic nanodevices.


2020 ◽  
Vol 52 (4) ◽  
pp. 481-490
Author(s):  
Dejan Jeremic ◽  
Ljubica Andjelkovic ◽  
Milica Milenkovic ◽  
Marija Suljagic ◽  
Maja Sumar-Ristovic ◽  
...  

This work is the first report of a very simple and fast one-pot synthesis of nickel oxide (NiO) and hematite (?-Fe2O3) nanoparticles by thermal decomposition of transition metal aqua complexes with camphor sulfonate anions. Obtained nanopowders were characterized by X-ray powder diffraction, Fourier transform IR analysis, scanning electron microscopy, and Energy-dispersive X-ray spectroscopy. X-ray powder diffraction confirmed the formation of high purity NiO and ?-Fe2O3 crystal phases. In the case of ?-Fe2O3, about five times larger average crystallite size was obtained. Fourier transform IR spectra of synthesized materials showed characteristic peaks for NiO and ?-Fe2O3 nanostructures. To visualize the morphology and the chemical composition of the final products Scanning electron microscopy and Energy-dispersive X-ray spectroscopy were performed. The thermogravimetric analysis was done for a better understanding of the general thermal behavior of precursor compounds. This easy-to-perform and fast preparation method opens a broad range of obtained materials? usage, particularly due to its economic viability


2019 ◽  
Vol 61 (11) ◽  
pp. 2240
Author(s):  
Ю.А. Стенькин ◽  
В.В. Болотов ◽  
Д.В. Соколов ◽  
В.Е. Росликов ◽  
К.Е. Ивлев

Nanocomposites based on multiwalled carbon nanotubes (MWCNT) with manganese dioxide (MnO2-x) and copper oxide (CuO) were obtained and investigated. The morphology and elemental composition of MWCNT-layer and nanocomposites MWCNT/MnO2-х, MWCNT/MnO2-х/CuO were studied by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The gas sensing response of MWCNT-layer and nanocomposites upon exposure to hydrogen sulfide (H2S) and nitrogen dioxide (NO2) was demonstrated at room temperature. Effect of increasing the conductivity of MWCNT-layer and nanocomposites upon exposure to NO2 indicates these nanomaterials have conductive of p-type. Copper oxide in nanocomposite significantly enhances the gas sensing response to H2S.


Nanomaterials ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 1003 ◽  
Author(s):  
Auriane Fifame Oussou-Azo ◽  
Tomoki Nakama ◽  
Masayuki Nakamura ◽  
Taiki Futagami ◽  
Mun’delanji Catherine M. Vestergaard

Copper has been used as an antimicrobial agent for over a century and is now being added to commercial fungicides. Nanomaterials have attracted much attention due to the special properties they have over their bulk form. We studied nanostructured copper (Cu-NPs), investigating the potential for improved antifungal properties derived from its special properties and studied any effect that the oxidation of copper (CuO-NPs) may have. We conducted this research against Colletotrichum gloeoesporioides, a devastating pathogen to plants/crops worldwide. Research on the effects of copper on this fungus are limited. Our studies showed that nanoforms of copper had significant antifungal activities, with Cu-NPs offering the most sustainable efficacy and was more effective than its oxidative form (CuO-NPs). Scanning Electron Microscopy (SEM) images of the treated pathogen show that the hyphae had a swollen appearance, lost their filamentous structure, and the mycelia had a powder-like structure, indicating the probable destruction of the hyphal tubular cell wall. X-ray Difractogram (XRD) outputs showed substantial changes in the physical characteristics of the Cu-NPs after interaction with the fungus. This is the first report to demonstrate chemo-physical changes in the metal compounds, opening new insights for further studies on the mechanism of copper’s antifungal properties.


Crystals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1137
Author(s):  
Fazal Ur Rehman ◽  
Rashid Mahmood ◽  
Manel Ben Ali ◽  
Amor Hedfi ◽  
Amine Mezni ◽  
...  

This study was planned to synthesize a multifunctional nanomaterial that can effectively encounter the organic pollutants, multidrug-resistant bacteria and reactive free radicals. The Bergenia ciliate (B. ciliate) leaves extract was used as a reducing and capping agent for the synthesis of nickel oxide nanoparticles (NiO NP). The physicochemical properties were studied through X-ray diffractometre (XRD), energy dispersive X-ray (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible and Fourier transform infrared (FTIR) spectroscopies. The highly crystalline monoclinic NiO NPs were synthesized with crystallite size of 27.45 nm. The average particle size derived from TEM micrograph was 49.35 nm whereas the calculated band gap for NiO NPs was 3.78 eV. The photocatalytic study shows that 92.17% of the rhodamine 6G (Rh-6G) was efficiently degraded in the presence of NiO NPs. The agar well diffusion method was applied to examine the antibacterial activity of NiO NPs and the activity was found higher against Gram-negative bacteria (GNB) as compared to Gram-positive bacteria (GPB). The ABTS free radical scavenging activity was also performed, however, the activity was found less than the standard.


1990 ◽  
Vol 5 (11) ◽  
pp. 2424-2432 ◽  
Author(s):  
S. C. Sharma ◽  
M. Green ◽  
R. C. Hyer ◽  
C. A. Dark ◽  
T. D. Black ◽  
...  

We have deposited diamond films on Si〈111〉 using hot filament assisted chemical vapor deposition at low pressures ∼25 Torr. Diamond films deposited at different relative concentrations of methane (ranging from 0.25% to 2.0%) in methane-hydrogen mixtures have been characterized by Raman spectroscopy, scanning electron microscopy, and x-ray photoelectron spectroscopy. With varying methane concentration, Raman spectra show features characteristic of crystalline diamond, diamond-like carbon, and polycrystalline graphite. Scanning electron micrographs show densely packed diamond crystallites. SEM measurements made on diamond films grown as a function of time show that the median grain size of the diamond crystallites increases linearly with time during the initial phase of the growth. X-ray photoelectron spectroscopy reveals differences between the diamond sp3 covalent bonding and sp2 graphitic bonding as well as the extent of s-p hybridization as a function of methane concentration. The plasmon loss shoulder, characteristic of graphite, is absent from the spectrum of 0.25% methane concentration film. But it appears in the XPS spectra of films grown at higher concentrations.


2021 ◽  
Author(s):  
Ali Bashal ◽  
Tarob A Abdel Baset ◽  
Mostafa Abboudi ◽  
Hamza Qasem ◽  
Fahd Al-Wadaani

Abstract In this study, NiO NPs and doped NiO NPs were prepared in a two-step process and they were analyzed by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption desorption. X-ray diffraction outcome clarified that all the patterns present the similar peaks that are attributed to the cubic variety of the NiO and all doping metals could be inserted into the NiO structure. TEM result showed that the NiO NPs are assembled side by side and aligned along the same direction to form small array shaped nano-agglomerates of 500 nm in length and 50–70 nm in diameter. Adsorption-desorption isotherms for N2 showed that NiO NPs represents type IV isotherms containing a hysteresis loop at relative pressure between 0.5 and 1.0. Hysteresis loop’s shape was of H2 type which is characteristic of inckbottle shaped pores. It was also in the shape of solids composed by small spherical particles. The dielectric properties and electrical conductivity for these samples were also studied within the temperature range 25oC – 110oC and within the frequency range 100 Hz to 0.3 MHz.


Author(s):  
Ann Chidester Van Orden ◽  
John L. Chidester ◽  
Anna C. Fraker ◽  
Pei Sung

The influence of small variations in the composition on the corrosion behavior of Co-Cr-Mo alloys has been studied using scanning electron microscopy (SEM), energy dispersive x-ray analysis (EDX), and electrochemical measurements. SEM and EDX data were correlated with data from in vitro corrosion measurements involving repassivation and also potentiostatic anodic polarization measurements. Specimens studied included the four alloys shown in Table 1. Corrosion tests were conducted in Hanks' physiological saline solution which has a pH of 7.4 and was held at a temperature of 37°C. Specimens were mechanically polished to a surface finish with 0.05 µm A1203, then exposed to the solution and anodically polarized at a rate of 0.006 v/min. All voltages were measured vs. the saturated calomel electrode (s.c.e.).. Specimens had breakdown potentials near 0.47V vs. s.c.e.


Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.


Sign in / Sign up

Export Citation Format

Share Document