scholarly journals A Novel SRAM PUF Stability Improvement Method Using Ionization Irradiation

Electronics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 1498
Author(s):  
Xu Zhang ◽  
Chunsheng Jiang ◽  
Ke Gu ◽  
Le Zhong ◽  
Wen Fang ◽  
...  
Keyword(s):  
Integrated Circuit ◽  
Hamming Distance ◽  
Low Cost ◽  
Dose Range ◽  
Random Access ◽  
Performance Factors ◽  
Total Ionization ◽  
Trade Offs ◽  
Improvement Method ◽  
The Stability

As one of the fundamental elements of the fingerprints of integrated circuit chips, static random-access memory based physical unclonable function (SRAM PUF) has been regarded as an attractive option for hardware security circuits. Commercial SRAM chips could be used as PUF chips for low cost systems. However, the mismatches existing in most commercial SRAM chips are quite small, which could result in poor stability of SRAM PUF. To address this issue, this paper proposes a novel SRAM PUF stability improvement method using total ionization dose (TID) effect for commercial SRAM chips. The principles of this new method are presented in detail and verified by simulations. Thereafter, the TID experiments are carried out on one kind of commercial SRAM chips and validate that this novel method could reduce the intra-chip hamming distance (??_?????) by two orders of magnitude within the ionizing dose range of 40–100 Krad (SiO2), which is a significant stability improvement. Furthermore, considering the trade-offs of other performance factors, 40 Krad (SiO2) has been regarded as the recommended ionizing dose, which not only makes the stability and uniformity of SRAM PUF attain almost ideal values but also keeps the radiation-induced damage within a limited level.

A Low Cost MST-FSM Obfuscation Method for Hardware IP Protection

2020 ◽  
Vol 29 (13) ◽  
pp. 2050208
Author(s):  
Yuejun Zhang ◽  
Zhao Pan ◽  
Pengjun Wang ◽  
Xiaowei Zhang
Keyword(s):  
Integrated Circuit ◽  
Spanning Tree ◽  
Minimum Spanning Tree ◽  
Hamming Distance ◽  
Low Cost ◽  
The Arts ◽  
Finite State ◽  
Ip Cores ◽  
Building Program ◽  
The Cost

Effective resistance to intellectual property (IP) piracy, overproduction and reverse engineering are becoming more and more necessary in the integrated circuit (IC) supply chain. To protect the hardware, the obfuscation methodology hides the original function by adding a large number of redundant states. However, existing hardware obfuscation approaches have hardware overhead and efficiency of obfuscation limitations. This paper proposed a novel methodology for IP security using the minimum spanning tree finite state machine (MST-FSM) obfuscation. In the minimum spanning tree (MST) algorithm, the Hamming distance defines the cost of obfuscated states. The Kruskal algorithm optimizes the connection relationship of obfuscated states by computing the Hamming distance of the MST-FSM. The proposed MST-FSM is automatically generated and embedded in the hardware IP with the self-building program. Finally, the MST-FSM is applied on the itc99 benchmark circuits and encryption standard IP cores. Compared with other state-of-the-arts, the obfuscation potency is improved by 3.57%, and the average hardware cost is decreased by about 6.01%.

Metallization for Integrated Circuit Manufacturing

MRS Bulletin ◽  
1995 ◽  
Vol 20 (11) ◽  
pp. 33-37 ◽  
Author(s):  
R.V. Joshi ◽  
R.S. Blewer ◽  
S. Murarka
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
High Performance ◽  
Low Cost ◽  
Semiconductor Industry ◽  
Random Access ◽  
Circuit Performance ◽  
Integrated Circuit Manufacturing ◽  
The 1960S ◽  
Al Metallization

This issue of the MRS Bulletin focuses on current interconnect metallurgies practiced in the manufacturing of integrated circuits (ICs). The issue should serve as a reference for researchers, scientists, engineers, and those who are not familiar with the IC arena.Al-metallization requires special attention due to its wide usage in logic and memory circuits. Logic requirements drive technology toward improved circuit performance while memory improvements require high device and wiring densities. As the dynamic random access memory (DRAM) evolves from 64 Mbits to 256 Mbits, ultralarge-scale integrated (ULSI) wiring will decrease to below sub-0.3 μm in dimensions. Such circuits require robust, reliable back end of the line (BEOL) technology that meets high-performance, low-cost, stringent electromigration requirements. We feel that several of these emerging interconnect fabrication techniques have reached a sufficient level of maturity to warrant a reasonable exposition. We will concentrate on metallization systems in this issue, leaving a discussion of dielectrics for the future, due to space limitations.The semiconductor industry has relied on aluminum technology since the 1960s because it is a well-established, low-cost technology. Early improvements in the electromigration resistance of Al lines by the addition of Cu impurities after 1971 helped this metallurgy to endure further feature size reductions, without degradation of reliability. However, the relentless reduction in via and line size once again may bring into question the limitation of Al reliability. As a result, work on alternate low-resistivity and high-electromigration-resistant metals like Cu is continuing in parallel.

Programmable Integrated Photonics

2020 ◽  
Author(s):  
José Capmany ◽  
Daniel Pérez
Keyword(s):  
Integrated Circuit ◽  
Performance Monitoring ◽  
Low Cost ◽  
Limiting Factors ◽  
External Control ◽  
Integrated Photonics ◽  
New Paradigm ◽  
Photonic Integrated Circuit ◽  
And Performance ◽  
Application Fields

Programmable Integrated Photonics (PIP) is a new paradigm that aims at designing common integrated optical hardware configurations, which by suitable programming can implement a variety of functionalities that, in turn, can be exploited as basic operations in many application fields. Programmability enables by means of external control signals both chip reconfiguration for multifunction operation as well as chip stabilization against non-ideal operation due to fluctuations in environmental conditions and fabrication errors. Programming also allows activating parts of the chip, which are not essential for the implementation of a given functionality but can be of help in reducing noise levels through the diversion of undesired reflections. After some years where the Application Specific Photonic Integrated Circuit (ASPIC) paradigm has completely dominated the field of integrated optics, there is an increasing interest in PIP justified by the surge of a number of emerging applications that are and will be calling for true flexibility, reconfigurability as well as low-cost, compact and low-power consuming devices. This book aims to provide a comprehensive introduction to this emergent field covering aspects that range from the basic aspects of technologies and building photonic component blocks to the design alternatives and principles of complex programmable photonics circuits, their limiting factors, techniques for characterization and performance monitoring/control and their salient applications both in the classical as well as in the quantum information fields. The book concentrates and focuses mainly on the distinctive features of programmable photonics as compared to more traditional ASPIC approaches.

scholarly journals Exploring the Structural Competition between the Black and the Yellow Phase of CsPbI3

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1282
Author(s):  
Ioannis Deretzis ◽  
Corrado Bongiorno ◽  
Giovanni Mannino ◽  
Emanuele Smecca ◽  
Salvatore Sanzaro ◽  
...  
Keyword(s):  
Perovskite Phase ◽  
Low Cost ◽  
Δ Phase ◽  
Nanocrystalline Structures ◽  
Halide Perovskites ◽  
The Stability ◽  
Structural Competition ◽  
Lead Halide ◽  
Main Candidate ◽  
Spontaneous Phase

The realization of stable inorganic perovskites is crucial to enable low-cost solution-processed photovoltaics. However, the main candidate material, CsPbI3, suffers from a spontaneous phase transition at room temperature towards a photo-inactive orthorhombic δ-phase (yellow phase). Here we used theoretical and experimental methods to study the structural and electronic features that determine the stability of the CsPbI3 perovskite. We argued that the two physical characteristics that favor the black perovskite phase at low temperatures are the strong spatial confinement in nanocrystalline structures and the level of electron doping in the material. Within this context, we discussed practical procedures for the realization of long-lasting inorganic lead halide perovskites.

scholarly journals Longevity of Raw and Lyophilized Crude Urease Extracts

2021 ◽  
Vol 2 (2) ◽  
pp. 325-334
Author(s):  
Neda Javadi ◽  
Hamed Khodadadi Tirkolaei ◽  
Nasser Hamdan ◽  
Edward Kavazanjian
Keyword(s):  
Crude Extract ◽  
Room Temperature ◽  
Low Cost ◽  
Extraction Process ◽  
Crude Extracts ◽  
Simple Extraction ◽  
Commercial Applications ◽  
Stable Source ◽  
The Stability ◽  
The Cost

The stability (longevity of activity) of three crude urease extracts was evaluated in a laboratory study as part of an effort to reduce the cost of urease for applications that do not require high purity enzyme. A low-cost, stable source of urease will greatly facilitate engineering applications of urease such as biocementation of soil. Inexpensive crude extracts of urease have been shown to be effective at hydrolyzing urea for carbonate precipitation. However, some studies have suggested that the activity of a crude extract may decrease with time, limiting the potential for its mass production for commercial applications. The stability of crude urease extracts shown to be effective for biocementation was studied. The crude extracts were obtained from jack beans via a simple extraction process, stored at room temperature and at 4 ℃, and periodically tested to evaluate their stability. To facilitate storage and transportation of the extracted enzyme, the longevity of the enzyme following freeze drying (lyophilization) to reduce the crude extract to a powder and subsequent re-hydration into an aqueous solution was evaluated. In an attempt to improve the shelf life of the lyophilized extract, dextran and sucrose were added during lyophilization. The stability of purified commercial urease following rehydration was also investigated. Results of the laboratory tests showed that the lyophilized crude extract maintained its activity during storage more effectively than either the crude extract solution or the rehydrated commercial urease. While incorporating 2% dextran (w/v) prior to lyophilization of the crude extract increased the overall enzymatic activity, it did not enhance the stability of the urease during storage.

scholarly journals A Real-Time Method for Improving Stability of Monolithic Quartz Crystal Microbalance Operating under Harsh Environmental Conditions

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4166
Author(s):  
Román Fernández ◽  
María Calero ◽  
Yolanda Jiménez ◽  
Antonio Arnau
Keyword(s):  
Real Time ◽  
Quartz Crystal Microbalance ◽  
Quartz Crystal ◽  
Limit Of Detection ◽  
Quartz Substrate ◽  
Low Cost ◽  
Discrete Wavelet ◽  
Reagent Consumption ◽  
Measurement Cell ◽  
The Stability

Monolithic quartz crystal microbalance (MQCM) has recently emerged as a very promising technology suitable for biosensing applications. These devices consist of an array of miniaturized QCM sensors integrated within the same quartz substrate capable of detecting multiple target analytes simultaneously. Their relevant benefits include high throughput, low cost per sensor unit, low sample/reagent consumption and fast sensing response. Despite the great potential of MQCM, unwanted environmental factors (e.g., temperature, humidity, vibrations, or pressure) and perturbations intrinsic to the sensor setup (e.g., mechanical stress exerted by the measurement cell or electronic noise of the characterization system) can affect sensor stability, masking the signal of interest and degrading the limit of detection (LoD). Here, we present a method based on the discrete wavelet transform (DWT) to improve the stability of the resonance frequency and dissipation signals in real time. The method takes advantage of the similarity among the noise patterns of the resonators integrated in an MQCM device to mitigate disturbing factors that impact on sensor response. Performance of the method is validated by studying the adsorption of proteins (neutravidin and biotinylated albumin) under external controlled factors (temperature and pressure/flow rate) that simulate unwanted disturbances.

Modal Analyses of Deployable Truss Structures Based on Shape Memory Polymer Composites

2016 ◽  
Vol 08 (07) ◽  
pp. 1640009 ◽  
Author(s):  
Fengfeng Li ◽  
Liwu Liu ◽  
Xin Lan ◽  
Tong Wang ◽  
Xiangyu Li ◽  
...  
Keyword(s):  
Finite Element ◽  
Shape Memory ◽  
Polymer Composites ◽  
Dynamic Properties ◽  
Low Cost ◽  
Shape Memory Polymer ◽  
Truss Structures ◽  
Modal Test ◽  
The Stability ◽  
Mechanical Devices

With large spatial deployable antennas used more widely, the stability of deployable antennas is attracting more attention. The form of the support structure is an important factor of the antenna’s natural frequency, which is essential to study to prevent the resonance. The deployable truss structures based on shape memory polymer composites (SMPCs) have made themselves feasible for their unique properties such as highly reliable, low-cost, light weight, and self-deployment without complex mechanical devices compared with conventional deployable masts. This study offers deliverables as follows: an establishment of three-longeron beam and three-longeron truss finite element models by using ABAQUS; calculation of natural frequencies and vibration modes; parameter studies for influence on their dynamic properties; manufacture of a three-longeron truss based on SMPC, and modal test of the three-longeron truss. The results show that modal test and finite element simulation fit well.

Simulation and Design of a Silicon Nanowire based Phase Change Memory Cell

2012 ◽  
Vol 1431 ◽  
Author(s):  
Ramin Banan Sadeghian ◽  
Yusuf Leblebici ◽  
Ali Shakouri
Keyword(s):  
Phase Change ◽  
High Speed ◽  
Low Cost ◽  
Silicon Nanowire ◽  
Phase Change Memory ◽  
Random Access ◽  
Memory Cell ◽  
Oxide Thickness ◽  
Nanowire Diameter ◽  
Change Memory

ABSTRACTIn this work we present preliminary calculations and simulations to demonstrate feasibility of programming a nanoscale Phase Change Random Access Memory (PCRAM) cell by means of a silicon nanowire ballistic transistor (SNWBT). Memory cells based on ballistic transistors bear the advantage of having a small size and high-speed operation with low power requirements. A one-dimensional MOSFET model (FETToy) was used to estimate the output current of the nanowire as a function of its diameter. The gate oxide thickness was 1.5 nm, and the Fermi level at source was set to -0.32 eV. For the case of VDS = VGS = 1 V, when the nanowire diameter was increased from 1 to 60 nm, the output power density dropped from 109 to 106 W cm-2 , while the current increased from 20 to 90 μA. Finite element electro-thermal analysis were carried out on a segmented cylindrical phase-change memory cell made of Ge2Sb2Te5 (GST) chalcogenide, connected in series to the SNWBT. The diameter of the combined device, d, and the aspect ratio of the GST region were selected so as to achieve optimum heating of the GST. With the assumption that the bulk thermal conductivity of GST does not change significantly at the nanoscale, it was shown that for d = 24 nm, a ‘reset’ programming current of ID = 80 μA can heat the GST up to its melting point. The results presented herein can help in the design of low cost, high speed, and radiation tolerant nanoscale PCRAM devices.

Thinking about Jointly Preventing the “Color Revolution” by China and Russia

2021 ◽  
pp. 100
Author(s):  
chensheng wang
Keyword(s):  
International System ◽  
Low Cost ◽  
The United States ◽  
Regional Security ◽  
Healthy Development ◽  
Regional Coordination ◽  
Color Revolution ◽  
Return Method ◽  
The Stability ◽  
Surrounding Areas

The color revolution, which is a “low-cost and high-return” method in regime change, has become the main mean and priority option for America to subvert dissident regimes. In recent years, with the raising strength of containing and suppressing between China with Russia by the United States, America has tried its best to plan “color revolution” not only around China and Russia, but also within the borders of the two countries. China and Russia have become the key target of America in implementing the “color revolution”, however, the situation of the two countries to prevent the “color revolution” is particularly urgent. The “color revolution” not only disrupts the balance of the international system and regional security, but also seriously affects the stability of the country's political power and the healthy development of the economy. In view of this, it is now necessary for China and Russia to work together to prevent “color revolution”. Regarding the new changes, methods changed from non-violent to violent me, more advanced organizational methods, the younger generation of the participants, and changes in manifestations by the “color revolution”, as well as the underlying causes of the “color revolution”, China and Russia should have uindividualized strategies. China and Russia can strengthen cooperation in different areas, such as politics, economy, culture, ideological education, and regional coordination. China and Russia should take advantages of their respective experiences in dealing with “color revolution”, strengthen sharing and communicating experience with other countries in the region, and jointly build a barrier to prevent “color revolution” and protect the security and stability in China and Russia and the surrounding areas.

scholarly journals An Accurate DDS Method Using Compound Frequency Tuning Word and Its FPGA Implementation

Electronics ◽  
2018 ◽  
Vol 7 (11) ◽  
pp. 330 ◽  
Author(s):  
Yuqing Hou ◽  
Changlong Li ◽  
Sheng Tang
Keyword(s):  
Frequency Synthesizer ◽  
Frequency Tuning ◽  
Low Cost ◽  
Atomic Clock ◽  
Frequency Error ◽  
Frequency Synthesis ◽  
Direct Digital Synthesizer ◽  
Low Power Dissipation ◽  
Conversion Time ◽  
The Stability

Because of its high resolution, low cost, small volume, low power dissipation and less conversion time consumption, the direct digital synthesizer (DDS) method has been applied more and more in the fields of frequency synthesis and signal generation. However, only a limited number of precise frequency signals can be synthesized by the traditional DDS, for the reason that its accumulator modulus is fixed, and its frequency tuning word must be integer. In this paper, a precise DDS method using compound frequency tuning word is proposed, which improves the accuracy of synthesized signals at any frequency points on the premise of guaranteeing the stability of synthesized signals. In order to verify the effectiveness of the new method, a DDS frequency synthesizer based on FPGA is designed and implemented. Taking the rubidium atomic clock PRS10 as standard frequency source, the experiments shows that the frequency stability of the synthesized signal is better than 8.0 × 10−12/s, the relative frequency error is less than 4.8 × 10−12, and that the frequency accuracy is improved by three orders of magnitude compared with the traditional DDS method.

Sign in / Sign up

Export Citation Format

Share Document