scholarly journals Extension of Pin-Based Point-Wise Energy Slowing-Down Method for VHTR Fuel with Double Heterogeneity

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2179
Author(s):  
Tae-Young Han ◽  
Jin-Young Cho ◽  
Chang-Keun Jo ◽  
Hyun-Chul Lee
Keyword(s):  
Cross Sections ◽  
Cell Model ◽  
Unit Cell ◽  
Moderation Effect ◽  
Slowing Down ◽  
Matrix Layer ◽  
The Mean ◽  
Dancoff Factor ◽  
Double Heterogeneity ◽  
Very High

For the resonance treatment of a very high temperature reactors (VHTR) fuel with the double heterogeneity, an extension of the pin-based pointwise energy slowing-down method (PSM) was developed and implemented into DeCART. The proposed method, PSM-double heterogeneity (DH), has an improved spherical unit cell model with an explicit tri-structural isotropic (TRISO) model, a matrix layer, and a moderator for reflecting the moderation effect. The moderator volume was analytically derived using the relation of the Dancoff factor and the mean chord length. In the first step, the pointwise homogenized cross-sections for the compact was obtained after solving the slowing down equation for the spherical unit cell. Then, the shielded cross-section for the homogenized fuel compact was generated using the original PSM. The verification calculations were performed for the fuel pins with various packing fractions, compact sizes, TRISO sizes, and fuel temperatures. Additionally, two fuel block problems with very different sizes were examined and the depletion calculation was carried out for investigating the accuracy of the proposed method. They revealed that the PSM-DH has a good performance in the VHTR problems.

Monoamine Oxidase and Other Mitochondrial Enzymes in Density Subpopulations of Human Platelets

1988 ◽  
Vol 59 (01) ◽  
pp. 029-033 ◽  
Author(s):  
K G Chamberlain ◽  
D G Penington
Keyword(s):  
Monoamine Oxidase ◽  
Protein Concentration ◽  
Close Correlation ◽  
Human Platelets ◽  
Mitochondrial Enzymes ◽  
Density Fractions ◽  
Percoll Gradients ◽  
Normal Human ◽  
The Mean ◽  
Very High

SummaryNormal human platelets have been separated according to density on continuous Percoll gradients and the platelet distribution divided into five fractions containing approximately equal numbers of platelets. The mean volumes and protein contents of the platelets in each fraction were found to correlate positively with density while the protein concentration did not differ significantly between the fractions. Four mitochondrial enzymes (monoamine oxidase, glutamate dehydrogenase, cytochrome oxidase and NADP-dependent isocitrate dehydrogenase) were assayed and their activities per unit volume were found to increase in a very similar monotonie fashion with platelet density. When MAO and GDH were assayed on the same set of density fractions the correlation between the two activities was very high (r = 0.94–1.00, p <0.001) and a similar close correlation was found between MAO and ICDH. The results support the hypothesis that high density platelets either have a higher concentration of mitochondria or have larger mitochondria than low density platelets.

Der Sommer und Herbst 2003 aus phänologischer Sicht | Summer and autumn 2003 from a phenological point of view

2004 ◽  
Vol 155 (5) ◽  
pp. 142-145 ◽  
Author(s):  
Claudio Defila
Keyword(s):  
Time Series ◽  
New Record ◽  
Point Of View ◽  
Late Spring ◽  
Mean Deviation ◽  
Leaf Shedding ◽  
The Mean ◽  
Very High ◽  
Selection Of

The record-breaking heatwave of 2003 also had an impact on the vegetation in Switzerland. To examine its influences seven phenological late spring and summer phases were evaluated together with six phases in the autumn from a selection of stations. 30% of the 122 chosen phenological time series in late spring and summer phases set a new record (earliest arrival). The proportion of very early arrivals is very high and the mean deviation from the norm is between 10 and 20 days. The situation was less extreme in autumn, where 20% of the 103 time series chosen set a new record. The majority of the phenological arrivals were found in the class «normal» but the class«very early» is still well represented. The mean precocity lies between five and twenty days. As far as the leaf shedding of the beech is concerned, there was even a slight delay of around six days. The evaluation serves to show that the heatwave of 2003 strongly influenced the phenological events of summer and spring.

Growth table for Corsican pine in Flanders (Belgium)

1991 ◽  
Vol 56 ◽  
Author(s):  
B. Meuleman
Keyword(s):  
Insect Pests ◽  
Sandy Loam ◽  
Stand Density ◽  
Forest Tree ◽  
Permanent Plots ◽  
New Findings ◽  
Volume Increment ◽  
The Mean ◽  
Annual Volume ◽  
Very High

After  its introduction at the start of this century, the Corsican pine has become  an important forest tree in Flanders (Belgium). The total area covered by  Corsican pine is about 11.000 ha. Due to climatological factors it is  virtually absent from the Walloon part of Belgium. Despite the crisis in 1984  - 1986, practical experiences with its vitality and disease resistance are  generally positive. Compared to Scots pine which is native to Belgium, its  productivity and insensitivity for insect pests is large.     To quantify the productivity of Corsican pine, a growth table was  constructed using a method developed by PALM and DAGNELIE. It was based on  data from 321 temporarily and 80 permanent plots distributed over Flanders.  Five yield classes were distinguished according to dominant height at 50  years. For each yield class, a series of tables as a function of treatment  was constructed. Treatments were characterized by the mean annual  circumference increment.     These tables allow to predict the growth of Corsican pines. Such  predictions for the whole range of species are necessary for the development  of a good forestry policy and for timber industries. The tables also provide  information for any given Corsican pine stand that is helpful in practice:  expected productivity, stand density, determination of the felling quantum.      The data show that the productivity of Corsican pine is very high. The very  early culmination of the current annual volume increment and the rather  constant level of the mean annual volume increment after culmination are  interesting new findings. It is also shown that it is possible to work with  long rotation periods. This offers good opportunities for the production of  high quality wood and is also important for the social and ecological role of  the forest.     Productivity is lowest on very dry and sandy soils. A high productivity on  moderately dry sand and loamy sand soils and loamy soils make the Corsican  pine one of the most valuable tree species for the Kempen in Flanders.  Although productivity is very high on well drained sandy loam and loam soils,  plantation of Corsican pine on these locations is not advised.

scholarly journals Exercise Intensity during Olympic-Distance Triathlon in Well-Trained Age-Group Athletes: An Observational Study

Sports ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 18
Author(s):  
Atsushi Aoyagi ◽  
Keisuke Ishikura ◽  
Yoshiharu Nabekura
Keyword(s):  
Heart Rate ◽  
Observational Study ◽  
Exercise Intensity ◽  
Time Range ◽  
Age Group ◽  
Slow Group ◽  
H 41 ◽  
The Mean ◽  
Aerobic And Anaerobic ◽  
Very High

The aim of this study was to examine the exercise intensity during the swimming, cycling, and running legs of nondraft legal, Olympic-distance triathlons in well-trained, age-group triathletes. Seventeen male triathletes completed incremental swimming, cycling, and running tests to exhaustion. Heart rate (HR) and workload corresponding to aerobic and anaerobic thresholds, maximal workloads, and maximal HR (HRmax) in each exercise mode were analyzed. HR and workload were monitored throughout the race. The intensity distributions in three HR zones for each discipline and five workload zones in cycling and running were quantified. The subjects were then assigned to a fast or slow group based on the total race time (range, 2 h 07 min–2 h 41 min). The mean percentages of HRmax in the swimming, cycling, and running legs were 89.8% ± 3.7%, 91.1% ± 4.4%, and 90.7% ± 5.1%, respectively, for all participants. The mean percentage of HRmax and intensity distributions during the swimming and cycling legs were similar between groups. In the running leg, the faster group spent relatively more time above HR at anaerobic threshold (AnT) and between workload at AnT and maximal workload. In conclusion, well-trained male triathletes performed at very high intensity throughout a nondraft legal, Olympic-distance triathlon race, and sustaining higher intensity during running might play a role in the success of these athletes.

scholarly journals Thermo-Viscoelastic Response of 3D Braided Composites Based on a Novel FsMsFE Method

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 271
Author(s):  
Jun-Jun Zhai ◽  
Xiang-Xia Kong ◽  
Lu-Chen Wang
Keyword(s):  
Finite Element ◽  
Cell Model ◽  
Structural Parameters ◽  
Thermal Relaxation ◽  
Viscoelastic Behavior ◽  
Unit Cell ◽  
Time Dependent ◽  
3D Braided Composites ◽  
Equivalent Time ◽  
Representative Unit Cell

A homogenization-based five-step multi-scale finite element (FsMsFE) simulation framework is developed to describe the time-temperature-dependent viscoelastic behavior of 3D braided four-directional composites. The current analysis was performed via three-scale finite element models, the fiber/matrix (microscopic) representative unit cell (RUC) model, the yarn/matrix (mesoscopic) representative unit cell model, and the macroscopic solid model with homogeneous property. Coupling the time-temperature equivalence principle, multi-phase finite element approach, Laplace transformation and Prony series fitting technology, the character of the stress relaxation behaviors at three scales subject to variation in temperature is investigated, and the equivalent time-dependent thermal expansion coefficients (TTEC), the equivalent time-dependent thermal relaxation modulus (TTRM) under micro-scale and meso-scale were predicted. Furthermore, the impacts of temperature, structural parameters and relaxation time on the time-dependent thermo-viscoelastic properties of 3D braided four-directional composites were studied.

scholarly journals Understanding the Drivers of Mobility during the COVID-19 Pandemic in Florida, USA Using a Machine Learning Approach

2021 ◽  
Vol 10 (7) ◽  
pp. 440
Author(s):  
Guimin Zhu ◽  
Kathleen Stewart ◽  
Deb Niemeier ◽  
Junchuan Fan
Keyword(s):  
Race And Ethnicity ◽  
Learning Approach ◽  
Mobility Patterns ◽  
Random Forest Regression ◽  
Related Factors ◽  
Machine Learning Approach ◽  
The Mean ◽  
Case Data ◽  
Staying At Home ◽  
Very High

As of March 2021, the State of Florida, U.S.A. had accounted for approximately 6.67% of total COVID-19 (SARS-CoV-2 coronavirus disease) cases in the U.S. The main objective of this research is to analyze mobility patterns during a three month period in summer 2020, when COVID-19 case numbers were very high for three Florida counties, Miami-Dade, Broward, and Palm Beach counties. To investigate patterns, as well as drivers, related to changes in mobility across the tri-county region, a random forest regression model was built using sociodemographic, travel, and built environment factors, as well as COVID-19 positive case data. Mobility patterns declined in each county when new COVID-19 infections began to rise, beginning in mid-June 2020. While the mean number of bar and restaurant visits was lower overall due to closures, analysis showed that these visits remained a top factor that impacted mobility for all three counties, even with a rise in cases. Our modeling results suggest that there were mobility pattern differences between counties with respect to factors relating, for example, to race and ethnicity (different population groups factored differently in each county), as well as social distancing or travel-related factors (e.g., staying at home behaviors) over the two time periods prior to and after the spike of COVID-19 cases.

scholarly journals Aerodynamics of smooth and rough square-section prisms at incidence in very high Reynolds-number cross-flows

2021 ◽  
Vol 62 (3) ◽  
Author(s):  
Nils Paul van Hinsberg
Keyword(s):  
Reynolds Number ◽  
Cross Sections ◽  
Reynolds Numbers ◽  
Circular Cylinders ◽  
Surface Boundary ◽  
Experimental Proof ◽  
Surface Boundary Layer ◽  
Pitch Moment ◽  
The Mean ◽  
High Reynolds

Abstract The aerodynamics of smooth and slightly rough prisms with square cross-sections and sharp edges is investigated through wind tunnel experiments. Mean and fluctuating forces, the mean pitch moment, Strouhal numbers, the mean surface pressures and the mean wake profiles in the mid-span cross-section of the prism are recorded simultaneously for Reynolds numbers between 1$$\times$$ × 10$$^{5}$$ 5 $$\le$$ ≤ Re$$_{D}$$ D $$\le$$ ≤ 1$$\times$$ × 10$$^{7}$$ 7 . For the smooth prism with $$k_s$$ k s /D = 4$$\times$$ × 10$$^{-5}$$ - 5 , tests were performed at three angles of incidence, i.e. $$\alpha$$ α = 0$$^{\circ }$$ ∘ , −22.5$$^{\circ }$$ ∘ and −45$$^{\circ }$$ ∘ , whereas only both “symmetric” angles were studied for its slightly rough counterpart with $$k_s$$ k s /D = 1$$\times$$ × 10$$^{-3}$$ - 3 . First-time experimental proof is given that, within the accuracy of the data, no significant variation with Reynolds number occurs for all mean and fluctuating aerodynamic coefficients of smooth square prisms up to Reynolds numbers as high as $$\mathcal {O}$$ O (10$$^{7}$$ 7 ). This Reynolds-number independent behaviour applies to the Strouhal number and the wake profile as well. In contrast to what is known from square prisms with rounded edges and circular cylinders, an increase in surface roughness height by a factor 25 on the current sharp-edged square prism does not lead to any notable effects on the surface boundary layer and thus on the prism’s aerodynamics. For both prisms, distinct changes in the aerostatics between the various angles of incidence are seen to take place though. Graphic abstract

scholarly journals Addition of Flucytosine to Fluconazole for the Treatment of Cryptococcal Meningitis in Africa: A Multicountry Cost-effectiveness Analysis

2019 ◽  
Vol 70 (1) ◽  
pp. 26-29 ◽  
Author(s):  
Tinevimbo Shiri ◽  
Angela Loyse ◽  
Lawrence Mwenge ◽  
Tao Chen ◽  
Shabir Lakhi ◽  
...  
Keyword(s):  
Sensitivity Analysis ◽  
Cost Effectiveness ◽  
Cryptococcal Meningitis ◽  
Cost Effective ◽  
Immunodeficiency Virus ◽  
The Mean ◽  
The Cost ◽  
The Impact ◽  
Costing Analysis ◽  
Very High

Abstract Background Mortality from cryptococcal meningitis remains very high in Africa. In the Advancing Cryptococcal Meningitis Treatment for Africa (ACTA) trial, 2 weeks of fluconazole (FLU) plus flucytosine (5FC) was as effective and less costly than 2 weeks of amphotericin-based regimens. However, many African settings treat with FLU monotherapy, and the cost-effectiveness of adding 5FC to FLU is uncertain. Methods The effectiveness and costs of FLU+5FC were taken from ACTA, which included a costing analysis at the Zambian site. The effectiveness of FLU was derived from cohorts of consecutively enrolled patients, managed in respects other than drug therapy, as were participants in ACTA. FLU costs were derived from costs of FLU+5FC in ACTA, by subtracting 5FC drug and monitoring costs. The cost-effectiveness of FLU+5FC vs FLU alone was measured as the incremental cost-effectiveness ratio (ICER). A probabilistic sensitivity analysis assessed uncertainties and a bivariate deterministic sensitivity analysis examined the impact of varying mortality and 5FC drug costs on the ICER. Results The mean costs per patient were US $847 (95% confidence interval [CI] $776–927) for FLU+5FC, and US $628 (95% CI $557–709) for FLU. The 10-week mortality rate was 35.1% (95% CI 28.9–41.7%) with FLU+5FC and 53.8% (95% CI 43.1–64.1%) with FLU. At the current 5FC price of US $1.30 per 500 mg tablet, the ICER of 5FC+FLU versus FLU alone was US $65 (95% CI $28–208) per life-year saved. Reducing the 5FC cost to between US $0.80 and US $0.40 per 500 mg resulted in an ICER between US $44 and US $28 per life-year saved. Conclusions The addition of 5FC to FLU is cost-effective for cryptococcal meningitis treatment in Africa and, if made available widely, could substantially reduce mortality rates among human immunodeficiency virus–infected persons in Africa.

Topological cross sections in hadron-nucleon and hadron-nucleus collisions at very high energies

1983 ◽  
Vol 399 (2) ◽  
pp. 515-528 ◽  
Author(s):  
H.J. Pirner ◽  
W.Q. Chao ◽  
M.K. Hegab
Keyword(s):  
Cross Sections ◽  
High Energies ◽  
Very High

The influence of pH on the synthesis of mixed Fe-Mn oxide minerals

Clay Minerals ◽  
1990 ◽  
Vol 25 (4) ◽  
pp. 507-518 ◽  
Author(s):  
M. H. Ebinger ◽  
D. G. Schulze
Keyword(s):  
Iron Oxides ◽  
Mole Fraction ◽  
Unit Cell ◽  
Mn Oxide ◽  
Cell Dimensions ◽  
The Mean ◽  
Mn Substitution ◽  
Oxide Minerals ◽  
Unit Cell Dimensions ◽  
Influence Of Ph

AbstractMn-substituted iron oxides were synthesized at pH 4, 6, 8, and 10 from Fe-Mn systems with Mn mole fractions (Mn/(Mn + Fe)) of 0, 0·2, 0·4, 0·6, 0·8, and 1·0, and kept at 50°C for 40 days. The Mn mole fraction in goethite was <0·07 at pH 4 but increased to ∼0.47 at pH 6. Goethite and/or hematite formed in Fe and Fe + Mn syntheses at pH 4 and pH 6 at Mn mole fractions ≤0·8, and at Mn mole fractions ≤0·2 at pH 8 and pH 10. Hausmannite and jacobsite formed at pH 8 and pH 10 at Mn mole fractions ≥0·4. In the pure Mn syntheses, manganite (γ-MnOOH) formed at pH 4 and pH 6, whereas hausmannite (Mn3O4) formed at pH 8 and pH 10. As the Mn substitution increased, the unit-cell dimensions of goethite shifted toward those of groutite, and the mean crystallite dimensions of goethite decreased.

Sign in / Sign up

Export Citation Format

Share Document