scholarly journals Cadmium Pollution in the Tourism Environment: A Literature Review

Geosciences ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 242
Author(s):  
Anna V. Mikhailenko ◽  
Dmitry A. Ruban ◽  
Vladimir A. Ermolaev ◽  
A.J. (Tom) van Loon

Cadmium is a highly-toxic metal, and, its environmental occurrence and human exposure consequently deserve close attention. The insight into the relationships between cadmium and tourism relations has deepened during the past three decades and the research into this relationship is reviewed. For this purpose, 83 relevant publications (mainly articles in international journals) were analyzed. It was found that investigation of Cd in the tourism environment took place in all continents (except Antarctica) and has intensified since the mid-2000s; Chinese researchers are the most active contributors. The Cd occurrence in air, living organisms, sediments, soil, suspended particular matter, water, and of the human environment has been studied. It has become clear that tourism contributes to Cd pollution (particularly, by hotel wastewater and increased traffic), and, vice versa, Cd pollution of beaches, coastal waters, food, urban parks, etc. creates risks for tourists and increases human exposure to this toxic metal. Both mechanisms have received equal attention. Examples concern many places worldwide, with the Mediterranean and Central and Eastern Europe as apparently critical regions. Our significantly incomplete knowledge of the relationships between cadmium and tourism must be ascribed to the common oversimplification of these relationships and to the scarcity or even absence of information supplied by the most important tourist destinations. The present review demonstrates that more studies of heavy metals and, particularly, Cd in the tourism environment are needed.

Geophysics ◽  
2017 ◽  
Vol 82 (5) ◽  
pp. V335-V349 ◽  
Author(s):  
Benjamin Schwarz ◽  
Dirk Gajewski

Although in the past, in the context of stacking, traveltime moveout was only formulated in individual common-midpoint (CMP) gathers, multiparameter stacking uses normal moveout (NMO) approximations that span several neighboring CMPs. Multiparameter expressions such as the common reflection surface (CRS) or multifocusing are parameterized in terms of local slopes and curvatures of emerging wavefronts rather than effective velocities, which makes these approaches appear conceptually different from conventional velocity analysis. As a consequence, the unifying nature of multiparameter NMO is still not well-appreciated. In addition, CRS and multifocusing show distinctly different behavior in that they respond differently to the overburden heterogeneity and curvature of the target interface, and they either are or are not susceptible to moveout stretch. In our work, we seek to demystify the wavefront picture by demonstrating that the conventional and multidimensional NMO operators can conveniently be derived from the same auxiliary straight-ray geometry, either representing the optical projection or formulated in an effective replacement medium. Following the early work of de Bazelaire, we suggest a simple transformation between both domains and introduce generalized dual representations of the hyperbolic CRS, multifocusing, and the two recently introduced double-square-root expressions implicit CRS and nonhyperbolic CRS. In addition, we evaluate a generalized finite-offset NMO expression that can likewise be applied to active-source diffraction data and passive seismic events. Synthetic examples suggest unification, conveniently explain the origin of moveout stretch, and indicate that the joint use of different NMO approximations offers new insight into the character and origin of different wavefield components.


MRS Bulletin ◽  
1992 ◽  
Vol 17 (10) ◽  
pp. 24-26 ◽  
Author(s):  
Mark Alper

Poets and philosophers have, through the ages, viewed organisms as the embodiment of the mysterious “Vital Force,” a unique non-earthly element required for the functioning of life processes.Biologists have seen, in living organisms, an adaptive, self-reproducing, evolving collection of molecules acting solely according to the laws of chemistry and physics.Historians speak of the iron or bronze ages and, more recently of the plastics (polymers) and the silicon ages. Materials science departments speak of metals, alloys, ceramics, and perhaps polymers—but not of genes.The “common man” has, it must be admitted, seen living organisms as a source of useful and important materials—wood for building; cotton, silk, and other fibers for textiles; horn, shell, and bone for tools and weapons; fats for lubricants; fur for clothingBut, in fact, few of us now think of materials when we think of living things. Neither do we think of DNA, protein, and carbohydrates when we think of materials.No, biologists have not been blackballed by materials scientists, chemists, and physicists. Until recently, they neither understood the processes by which life produces its materials nor even conceived of manipulating those processes to tailor the properties of the materials to our needs. Only within the past few years has the “biological revolution” expanded our understanding of the molecular basis for biological phenomena and our ability to control them. It is only now, for the first time, that one can point to a legitimate field of science based on mimicking, adapting, and controlling biological systems with the goal of producing novel materials with important, unique, and useful properties.


TAPPI Journal ◽  
2015 ◽  
Vol 14 (1) ◽  
pp. 51-60
Author(s):  
HONGHI TRAN ◽  
DANNY TANDRA

Sootblowing technology used in recovery boilers originated from that used in coal-fired boilers. It started with manual cleaning with hand lancing and hand blowing, and evolved slowly into online sootblowing using retractable sootblowers. Since 1991, intensive research and development has focused on sootblowing jet fundamentals and deposit removal in recovery boilers. The results have provided much insight into sootblower jet hydrodynamics, how a sootblower jet interacts with tubes and deposits, and factors influencing its deposit removal efficiency, and have led to two important innovations: fully-expanded sootblower nozzles that are used in virtually all recovery boilers today, and the low pressure sootblowing technology that has been implemented in several new recovery boilers. The availability of powerful computing systems, superfast microprocessors and data acquisition systems, and versatile computational fluid dynamics (CFD) modeling capability in the past two decades has also contributed greatly to the advancement of sootblowing technology. High quality infrared inspection cameras have enabled mills to inspect the deposit buildup conditions in the boiler during operation, and helped identify problems with sootblower lance swinging and superheater platens and boiler bank tube vibrations. As the recovery boiler firing capacity and steam parameters have increased markedly in recent years, sootblowers have become larger and longer, and this can present a challenge in terms of both sootblower design and operation.


1996 ◽  
Vol 35 (2) ◽  
pp. 189-190
Author(s):  
Mir Annice Mahmood

This book, hereinafter referred to as the Guide, has been developed for those social analysts (e.g., anthropologists, sociologists, and human geographers) who have had little or no practical experience in applying their knowledge as development practitioners. In the past, development projects would be analysed from a narrow financial and economic perspective. But with the evolution of thinking on development, this narrow financial and economic aspect has now been broadened to include the impact on society as the very meaning of development has now come to symbolise social change. Thus, development is not restricted only to plans and figures; the human environment in its entirety is now considered for analysis while designing and implementing development projects.


2017 ◽  
Vol 68 (9) ◽  
pp. 2006-2009
Author(s):  
Marioara Nicula ◽  
Nicolae Pacala ◽  
Isidora Radulov ◽  
Mirela Ahmadi ◽  
Dorel Dronca ◽  
...  

In living organisms lead is classified as potential toxic metal, and in high concentration can produce intoxication with the alteration of some vital organs, especially liver and kidney. In aquatic environment lead can be absorbed by fishes and other organisms, with different distribution in various tissues. Our aim of experiment was to verify and demonstrate the protective effect of lyophilized garlic and chlorella against bioaccumulation of lead in fishes living in aquatic environment deliberated polluted with lead. Thus, lyophilized garlic and chlorella administrated as supplements in fodder for fishes (Carassius gibelio) diminished the antagonistic effect of lead against zinc in all tested tissues: liver, kidney, heart, brain, ovary, testis, muscles myotome � epaxial, skin � with scales, gills, and intestine.


2020 ◽  
Vol 15 ◽  
Author(s):  
Geeta Aggarwal ◽  
Manju Nagpal ◽  
Ameya Sharma ◽  
Vivek Puri ◽  
Gitika Arora Dhingra

Background: Biopharmaceuticals such as Biologic medicinal products have been in clinical use over the past three decades and have benefited towards the therapy of degenerative and critical metabolic diseases. It is forecasted that market of biologics will be going to increase at a rate of 20% per year, and by 2025, more than ˃ 50% of new drug approvals may be biological products. The increasing utilization of the biologics necessitates for cost control, especially for innovators products that have enjoyed a lengthy period of exclusive use. As the first wave of biopharmaceuticals is expired or set to expire, it has led to various opportunities for the expansion of bio-similars i.e. copied versions of original biologics with same biologic activity. Development of biosimilars is expected to promote market competition, meet worldwide demand, sustain the healthcare systems and maintain the incentives for innovation. Methods: Appraisal of published articles from peer reviewed journals, PubMed literature, latest news and guidelines from European Medicine Agency, US Food Drug Administration (FDA) and India are used to identify data for review. Results: Main insight into the quality requirements concerning biologics, current status of regulation of biosimilars and upcoming challenges lying ahead for the upgrading of marketing authorization of bio-similars has been incorporated. Compiled literature on therapeutic status, regulatory guidelines and the emerging trends and opportunities of biosimilars has been thoroughly stated. Conclusion: Updates on biosimilars will support to investigate the possible impact of bio-similars on healthcare market.


2020 ◽  
Vol 15 (7) ◽  
pp. 588-596
Author(s):  
Haibao Zhang ◽  
Guodong Zhu

Renal cell carcinoma (RCC) is one of the common urologic neoplasms, and its incidence has been increasing over the past several decades; however, its pathogenesis is still unknown up to now. Recent studies have found that in addition to tumor cells, other cells in the tumor microenvironment also affect the biological behavior of the tumor. Among them, macrophages exist in a large amount in tumor microenvironment, and they are generally considered to play a key role in promoting tumorigenesis. Therefore, we summarized the recent researches on macrophage in the invasiveness and progression of RCC in latest years, and we also introduced and discussed many studies about macrophage in RCC to promote angiogenesis by changing tumor microenvironment and inhibit immune response in order to activate tumor progression. Moreover, macrophage interactes with various cytokines to promote tumor proliferation, invasion and metastasis, and it also promotes tumor stem cell formation and induces drug resistance in the progression of RCC. The highlight of this review is to make a summary of the roles of macrophage in the invasion and progression of RCC; at the same time to raise some potential and possible targets for future RCC therapy.


Author(s):  
Andrew M. Yuengert

Although most economists are skeptical of or puzzled by the Catholic concept of the common good, a rejection of the economic approach as inimical to the common good would be hasty and counterproductive. Economic analysis can enrich the common good tradition in four ways. First, economics embodies a deep respect for economic agency and for the effects of policy and institutions on individual agents. Second, economics offers a rich literature on the nature of unplanned order and how it might be shaped by policy. Third, economics offers insight into the public and private provision of various kinds of goods (private, public, common pool resources). Fourth, recent work on the development and logic of institutions and norms emphasizes sustainability rooted in the good of the individual.


Author(s):  
Piero Ignazi

Chapter 1 introduces the long and difficult process of the theoretical legitimation of the political party as such. The analysis of the meaning and acceptance of ‘parties’ as tools of expressing contrasting visions moves forward from ancient Greece and Rome where (democratic) politics had first become a matter of speculation and practice, and ends up with the first cautious acceptance of parties by eighteenth-century British thinkers. The chapter explores how parties or factions have been constantly considered tools of division of the ‘common wealth’ and the ‘good society’. The holist and monist vision of a harmonious and compounded society, stigmatized parties and factions as an ultimate danger for the political community. Only when a new way of thinking, that is liberalism, emerged, was room for the acceptance of parties set.


Author(s):  
Philip James

The focus of this chapter is an examination of the diversity of living organisms found within urban environments, both inside and outside buildings. The discussion commences with prions and viruses before moving on to consider micro-organisms, plants, and animals. Prions and viruses cause disease in plants and animals, including humans. Micro-organisms are ubiquitous and are found in great numbers throughout urban environments. New technologies are providing new insights into their diversity. Plants may be found inside buildings as well as in gardens and other green spaces. The final sections of the chapter offer a discussion of the diversity of animals that live in urban areas for part or all of their life cycle. Examples of the diversity of life in urban environments are presented throughout, including native and non-native species, those that are benign and deadly, and the common and the rare.


Sign in / Sign up

Export Citation Format

Share Document