scholarly journals Deciphering Resistance to Root-Knot Nematodes in Prunus for Rootstock Breeding: Sources, Genetics and Characterization of the Ma Locus

Horticulturae ◽  
2021 ◽  
Vol 7 (12) ◽  
pp. 564
Author(s):  
Daniel Esmenjaud
Keyword(s):  
Positional Cloning ◽  
Control Method ◽  
Stone Fruit ◽  
Natural Resistance ◽  
Effect Of Temperature ◽  
Fruit Crops ◽  
Root Knot Nematodes ◽  
New Genes ◽  
Rootstock Breeding

Root-knot nematode (RKN) species are predominant pests of crops, attacking stone fruit crops Prunus spp. under Mediterranean climate conditions worldwide. Natural resistance for rootstock breeding is a control method that is gaining interest as an alternative to the highly toxic nematicides. This review first reports an outline of the root-knot nematodes parasitizing stone fruit crops and the Prunus species and rootstocks. It then describes the main sources of resistance detected among the Prunus germplasm and focuses on the major resistance genes identified and their characteristics (spectrum, durability, histological mechanism, effect of temperature, interaction with other pests and diseases, etc.). In peach, besides the RMia reference gene, the new genes PkMi and Mf, also located on chromosome 2, need to be characterized regarding their spectrum and relationship. The two other Prunus reference genes, Ma from plum (complete spectrum) and RMja from almond (more restricted spectrum), are orthologs that belong to a TIR-NB-LRR (TNL) cluster on chromosome 7. The review finally summarizes the positional cloning of the Ma gene and the characterization of its unique TNL structure, encompassing a five-times repeated post-LRR domain. Deciphering how this structure is functionally involved in Ma’s remarkable biological properties is a real challenge for the future.

scholarly journals Quantitative Characterization of Geotrichum candidum Growth in Milk

2021 ◽  
Vol 11 (10) ◽  
pp. 4619
Author(s):  
Petra Šipošová ◽  
Martina Koňuchová ◽  
Ľubomír Valík ◽  
Monika Trebichavská ◽  
Alžbeta Medveďová
Keyword(s):  
Growth Parameters ◽  
Mechanistic Model ◽  
Geotrichum Candidum ◽  
Activity Level ◽  
Effect Of Temperature ◽  
Operational Parameters ◽  
Quantitative Characterization ◽  
Essential Knowledge ◽  
Cardinal Temperatures

The study of microbial growth in relation to food environments provides essential knowledge for food quality control. With respect to its significance in the dairy industry, the growth of Geotrichum candidum isolate J in milk without and with 1% NaCl was investigated under isothermal conditions ranging from 6 to 37 °C. The mechanistic model by Baranyi and Roberts was used to fit the fungal counts over time and to estimate the growth parameters of the isolate. The effect of temperature on the growth of G. candidum in milk was modelled with the cardinal models, and the cardinal temperatures were calculated as Tmin = −3.8–0.0 °C, Topt = 28.0–34.6 °C, and Tmax = 35.2–37.2 °C. The growth of G. candidum J was slightly faster in milk with 1% NaCl and in temperature regions under 21 °C. However, in a temperature range that was close to the optimum, its growth was slightly inhibited by the lowered water activity level. The present study provides useful cultivation data for understanding the behaviour of G. candidum in milk and can serve as an effective tool for assessing the risk of fungal spoilage, predicting the shelf life of dairy products, or assessing the optimal conditions for its growth in relation to the operational parameters in dairy practices.

Thermorheological Characterization of Elastoviscoplastic Carbopol Ultrez 20 Gel

2015 ◽  
Vol 137 (3) ◽  
Author(s):  
M. A. Hassan ◽  
Manabendra Pathak ◽  
Mohd. Kaleem Khan
Keyword(s):  
Experimental Investigation ◽  
Yield Stress ◽  
Elastic Properties ◽  
Viscous Dissipation ◽  
Power Law ◽  
Effect Of Temperature ◽  
Rheological Parameters ◽  
Frequency Range ◽  
Power Law Index

The temperature and concentration play an important role on rheological parameters of the gel. In this work, an experimental investigation of thermorheological properties of aqueous gel Carbopol Ultrez 20 for various concentrations and temperatures has been presented. Both controlled stress ramps and controlled stress oscillatory sweeps were performed for obtaining the rheological data to find out the effect of temperature and concentration. The hysteresis or thixotropic seemed to have negligible effect. Yield stress, consistency factor, and power law index were found to vary with temperature as well as concentration. With gel concentration, the elastic effect was found to increase whereas viscous dissipation effect was found to decrease. Further, the change in elastic properties was insignificant with temperature in higher frequency range of oscillatory stress sweeps.

Preparation and Characterization of Carbon Supported Nano-Nickel and its Sorption Behavior for Zinc from Aqueous Solutions

2012 ◽  
Vol 510-511 ◽  
pp. 271-276 ◽  
Author(s):  
Tayyaba Asim ◽  
R. Ahmed ◽  
M.S. Ansari
Keyword(s):  
Morphological Study ◽  
Aqueous System ◽  
Effect Of Temperature ◽  
Vacuum Drying ◽  
Sorption Behavior ◽  
Nickel Deposition ◽  
Adsorption Data ◽  
Nano Nickel ◽  
The Mean

Nickel deposited on carbon has been used as adsorbent to recover Zn (II) from aqueous system. The adsorbent was synthesized by depositing nickel nitrate on carbon under inert conditions and decomposing it to nickel by raising the temperature, washing and vacuum drying. Various techniques including XRD, FTIR, and SEM were employed for its characterization. FTIR showed that the nickel deposition enhanced the carbon functionalization due to presence of OH, C=O and C-O groups.Average crystallite size ofabout 9 nm was determined from XRD. Nickel deposition resulted in further division particles as indicated from the morphological study. Zn (II) was subjected to adsorptionon the synthesized adsorbent. It was observed that the rate of adsorption increased significantly on the nickel deposited carbon than the carbon alone. Morris-Weber, Lagergren and Reichenberg models were applied to find out the type and rate of adsorption employingfirst and second order rate equations.The adsorption data were applied toLangmuir, Freundlich and D-R isotherms and values of isotherm constants were calculated and were higher for Ni/C than carbon alone. The mean free energy of zinc sorption on carbon and Ni/C are 16.67 and 18.26 kJmol-1 which shows chemisorption. Thermodynamic studies were done to find out the effect of temperature on sorption. Positive values of ΔH and negative values of ΔG show endothermic and spontaneous type of sorption.

Ground Adaptability Characterization for Digging in Complex Geotechnical Conditions and Risk Mitigation

2011 ◽  
Vol 415-417 ◽  
pp. 1431-1434
Author(s):  
Wei Wei Yu ◽  
Xuan Guo
Keyword(s):  
Risk Factors ◽  
Control Method ◽  
Risk Mitigation ◽  
Tunnel Construction ◽  
Soil Pressure ◽  
Ground Movements ◽  
Construction Risk ◽  
And Control ◽  
Methods Of Control

Characterization of geotechnical digging and control the dynamical settlement is very necessary to mitigate construction risk. The metro tunnels of being constructed access to each other or near to the ground is high risk and physically difficult and costly. The control method becomes imperative. Some cases of digging prediction of ground movements and assessment of risk of damage to above or adjacent constructions have become an important issue especially in urban projec. Ground adaptability characterization is the key of control the tunneling in complex geotechnical conditions both in rock and soft stratum. High and changed water-soil pressure also is risk factors to effect tunneling process. Beside discussion of risk mitigation associate to tunnel construction, the developing settlement control and simulations are given to describe the methods of control risk.

scholarly journals A4Mb High Resolution BAC Contig on Bovine Chromosome1q12and Comparative Analysis With Human Chromosome21q22

2005 ◽  
Vol 6 (4) ◽  
pp. 194-203 ◽  
Author(s):  
Cord Drögemüller ◽  
Anne Wöhlke ◽  
Tosso Leeb ◽  
Ottmar Distl
Keyword(s):  
Positional Cloning ◽  
Physical Map ◽  
Dominant Gene ◽  
Bac Library ◽  
Exact Order ◽  
Bac Contig ◽  
Nucleotide Sequence Data ◽  
New Genes ◽  
Human Genes ◽  
First Time

The bovine RPCI-42 BAC library was screened to construct a sequence-ready ~4 Mb single contig of 92 BAC clones on BTA 1q12. The contig covers the region between the genesKRTAP8P1andCLIC6. This genomic segment in cattle is of special interest as it contains the dominant gene responsible for the hornless or polled phenotype in cattle. The construction of the BAC contig was initiated by screening the bovine BAC library with heterologous cDNA probes derived from 12 human genes of the syntenic region on HSA 21q22. Contig building was facilitated by BAC end sequencing and chromosome walking. During the construction of the contig, 165 BAC end sequences and 109 single-copy STS markers were generated. For comparative mapping of 25 HSA 21q22 genes, genomic PCR primers were designed from bovine EST sequences and the gene-associated STSs mapped on the contig. Furthermore, bovine BAC end sequence comparisons against the human genome sequence revealed significant matches to HSA 21q22 and allowed thein silicomapping of two new genes in cattle. In total, 31 orthologues of human genes located on HSA 21q22 were directly mapped within the bovine BAC contig, of which 16 genes have been cloned and mapped for the first time in cattle. In contrast to the existing comparative bovine–human RH maps of this region, these results provide a better alignment and reveal a completely conserved gene order in this 4 Mb segment between cattle, human and mouse. The mapping of known polled linked BTA 1q12 microsatellite markers allowed the integration of the physical contig map with existing linkage maps of this region and also determined the exact order of these markers for the first time. Our physical map and transcript map may be useful for positional cloning of the putative polled gene in cattle. The nucleotide sequence data reported in this paper have been submitted to EMBL and have been assigned Accession Numbers AJ698510–AJ698674.

scholarly journals Effect of temperature on bio-oil fractions of palm kernel shell thermal distillation

2018 ◽  
Vol 1 (2) ◽  
pp. 27-31
Author(s):  
Deana Qarizada ◽  
Erfan Mohammadian ◽  
Azil Bahari Alias ◽  
Humapar Azhar Rahimi ◽  
Suriatie Binti Mat Yusuf
Keyword(s):  
Liquid Fraction ◽  
Palm Kernel ◽  
Product Yield ◽  
Effect Of Temperature ◽  
Heating Value ◽  
Palm Kernel Shell ◽  
Oil Fraction ◽  
Bio Oil ◽  
Oil Fractions

Distillation is an essential thermo chemical process; it mainly depends on temperature which affects mostly the product yield and composition. The aim of this research is to investigate the effect of temperature on the characterization of bio-oil liquid fraction derived from palm kernel shell (PKS) bio-oil. The temperatures were 100 °C and 140°C. The higher heating value (HHV) obtained were 28.6MJ/Kg and 31.5MJ/Kg for bio-oil fraction 100°C and 140°C respectively. The GC- MS analysis determined that phenol is the dominant product in bio-oil fractions.

scholarly journals Certification of stone fruit crops in Ukraine

2018 ◽  
pp. 219-227
Author(s):  
N. Triapitsyna ◽  
K. Udovychenko ◽  
S. Vasyuta
Keyword(s):  
Plant Material ◽  
Stone Fruit ◽  
Stone Fruits ◽  
Fruit Crops ◽  
The Creation ◽  
Selection Of

The results are the work during 2004—2018 years in Ukraine on the selection of material of stone fruits crops, which satisfies the requirements of the normative international documents for the creation of a prebasic clones collection. Analyzed state of plant material certification of these cultures.

Sign in / Sign up

Export Citation Format

Share Document