scholarly journals Evaluation and Bias Correction of CHIRP Rainfall Estimate for Rainfall-Runoff Simulation over Lake Ziway Watershed, Ethiopia

Hydrology ◽  
2019 ◽  
Vol 6 (3) ◽  
pp. 68 ◽  
Author(s):  
Demelash Wondimagegnehu Goshime ◽  
Rafik Absi ◽  
Béatrice Ledésert
Keyword(s):  
Water Balance ◽  
Bias Correction ◽  
Correction Method ◽  
Rain Gauge ◽  
Rainfall Runoff ◽  
Runoff Simulation ◽  
Spatial And Temporal Scales ◽  
Daily Streamflow ◽  
Satellite Rainfall ◽  
Parameter Values

In Lake Ziway watershed in Ethiopia, the contribution of river inflow to the water level has not been quantified due to scarce data for rainfall-runoff modeling. However, satellite rainfall estimates may serve as an alternative data source for model inputs. In this study, we evaluated the performance and the bias correction of Climate Hazards Group InfraRed Precipitation (CHIRP) satellite estimate for rainfall-runoff simulation at Meki and Katar catchments using the Hydrologiska Byråns Vattenbalansavdelning (HBV) hydrological model. A non-linear power bias correction method was applied to correct CHIRP bias using rain gauge data as a reference. Results show that CHIRP has biases at various spatial and temporal scales over the study area. The CHIRP bias with percentage relative bias (PBIAS) ranging from −16 to 20% translated into streamflow simulation through the HBV model. However, bias-corrected CHIRP rainfall estimate effectively reduced the bias and resulted in improved streamflow simulations. Results indicated that the use of different rainfall inputs impacts both the calibrated parameters and its performance in simulating daily streamflow of the two catchments. The calibrated model parameter values obtained using gauge and bias-corrected CHIRP rainfall inputs were comparable for both catchments. We obtained a change of up to 63% on the parameters controlling the water balance when uncorrected CHIRP satellite rainfall served as model inputs. The results of this study indicate that the potential of bias-corrected CHIRP rainfall estimate for water balance studies.

scholarly journals Evaluation of Satellite Based Precipitations and Their Applicability for Rainfall Runoff Modelling in Narayani Basin of Nepal

2016 ◽  
Vol 8 (1) ◽  
pp. 22-31 ◽  
Author(s):  
Sunil Ghaju ◽  
Knut Alfredsen
Keyword(s):  
Bias Correction ◽  
Rain Gauge ◽  
Extensive Study ◽  
Rainfall Runoff ◽  
Runoff Simulation ◽  
Satellite Precipitation ◽  
Precipitation Estimates ◽  
Set Up ◽  
Rain Gauge Network ◽  
Precipitation Station

High spatial variability of precipitation over Nepal demands dense network of rain-gauge stations. But to set-up a dense rain gauge network is almost impossible due to mountainous topography of Nepal. Also the dense rain gauge network will be very expensive and some time impossible for timely maintenance. Satellite precipitation products are an alternative way to collect precipitation data with high temporal and spatial resolution over Nepal. In this study, the satellite precipitation products TRMM and GSMaP were analyzed. Precipitation was compared with ground based gauge precipitation in the Narayani basin, while the applicability of these rainfall products for runoff simulation were tested using the LANDPINE model for Trishuli basin which is a sub-basin within Narayani catchment. The Nash-Sutcliffe efficiency calculated for TRMM and GSMaP from point to pixel comparison is negative for most of stations. Also the estimation bias for both the products is negative indicating under estimation of precipitation by satellite products, with least under estimation for the GSMaP precipitation product. After point to pixel comparison, satellite precipitation estimates were used for runoff simulation in the Trishuli catchment with and without bias correction for each product. Among the two products, TRMM shows good simulation result without any bias correction for calibration and validation period with scaling factor of 2.24 for precipitation which is higher than that for gauge precipitation. This suggests, it could be used for runoff simulation to the catchments where there is no precipitation station. But it is too early to conclude by just looking into one catchment. So extensive study need to be done to make such conclusion.Journal of Hydrology and Meteorology, Vol. 8(1) p.22-31

Correction and preparation of continuously measured raingauge data: a standard method in North Rhine-Westphalia

1998 ◽  
Vol 37 (11) ◽  
pp. 155-162 ◽  
Author(s):  
B. Maul-Kötter ◽  
Th. Einfalt
Keyword(s):  
Water Balance ◽  
Standard Method ◽  
The State ◽  
Rainfall Runoff ◽  
Runoff Simulation ◽  
Site Specific ◽  
Free Data ◽  
Important Input ◽  
Raingauge Data ◽  
Environmental Agency

Continuous raingauge measurements are an important input variable for detailed rainfall-runoff simulation. In North Rhine-Westphalia, more than 150 continuous raingauges are used for local hydrological design through the use of site specific rainfall runoff models. Requiring gap-free data, the State Environmental Agency developed methods to use a combination of daily measurements and neighbouring continuous measurements for filling periods of lacking data in a given raindata series. The objective of such a method is to obtain plausible data for water balance simulations. For more than 3500 station years the described methodology has been applied.

scholarly journals Experiences in using the TMPA-3B42R satellite data to complement rain gauge measurements in the Ecuadorian coastal foothills

2013 ◽  
Vol 17 (7) ◽  
pp. 2905-2915 ◽  
Author(s):  
M. Arias-Hidalgo ◽  
B. Bhattacharya ◽  
A. E. Mynett ◽  
A. van Griensven
Keyword(s):  
Satellite Data ◽  
Bias Correction ◽  
Hydrological Modeling ◽  
New Technologies ◽  
Simple Procedure ◽  
Rain Gauge ◽  
Experimental Methodology ◽  
Rain Gauge Data ◽  
Gauge Data ◽  
Satellite Rainfall

Abstract. At present, new technologies are becoming available to extend the coverage of conventional meteorological datasets. An example is the TMPA-3B42R dataset (research – v6). The usefulness of this satellite rainfall product has been investigated in the hydrological modeling of the Vinces River catchment (Ecuadorian lowlands). The initial TMPA-3B42R information exhibited some features of the precipitation spatial pattern (e.g., decreasing southwards and westwards). It showed a remarkable bias compared to the ground-based rainfall values. Several time scales (annual, seasonal, monthly, etc.) were considered for bias correction. High correlations between the TMPA-3B42R and the rain gauge data were still found for the monthly resolution, and accordingly a bias correction at that level was performed. Bias correction factors were calculated, and, adopting a simple procedure, they were spatially distributed to enhance the satellite data. By means of rain gauge hyetographs, the bias-corrected monthly TMPA-3B42R data were disaggregated to daily resolution. These synthetic time series were inserted in a hydrological model to complement the available rain gauge data to assess the model performance. The results were quite comparable with those using only the rain gauge data. Although the model outcomes did not improve remarkably, the contribution of this experimental methodology was that, despite a high bias, the satellite rainfall data could still be corrected for use in rainfall-runoff modeling at catchment and daily level. In absence of rain gauge data, the approach may have the potential to provide useful data at scales larger than the present modeling resolution (e.g., monthly/basin).

scholarly journals Satellite-Based Precipitation Estimation for Hydropower Development

2013 ◽  
Vol 12 ◽  
pp. 52-58 ◽  
Author(s):  
Bijaya Tamrakar ◽  
Knut Alfredsen
Keyword(s):  
Water Balance ◽  
Rain Gauge ◽  
Water Balance Model ◽  
Balance Model ◽  
Precipitation Data ◽  
Runoff Simulation ◽  
Ungauged Catchments ◽  
Statistical Parameters ◽  
Additional Advantage ◽  
Planning Stage

Runoff is one of the major factors that govern the capacity of a hydropower project. Precipitation data are needed for estimation of runoff through runoff simulation using a hydrological model. Dense setup of rain gauge network in a mountainous topography is difficult and expensive. An alternative for this problem is the use of Satellite precipitation data with high spatial and temporal resolution. They have an additional advantage that they represent areal precipitation. But, these data should be duly evaluated before using them. In this study, Tropical Rainfall Measuring Mission (TRMM 3B42) precipitation data are evaluated using ground based precipitation stations over Nepal and fed in a rainfall-runoff model to estimate monthly discharge through four of the major basins of Nepal. A simple water balance model has been used, initially developed by Thornthwaite. Statistical parameters showed significant under-estimation of precipitation over major areas of Nepal. The results from the water balance model presented quiet a good estimation of discharge through basins with an average Nash Sutcliffe Efficiency (R²) value of 0.8. This implies that TRMM data can be used for runoff simulations over Nepal. The TRMM satellite data can be used during the planning stage of hydropower projects as well as on ungauged catchments. Hydro Nepal: Journal of Water, Energy and Environment Vol. 12, 2013, January Page: 52-58DOI: http://dx.doi.org/10.3126/hn.v12i0.9033 Uploaded Date : 10/29/2013

scholarly journals Preliminary Study of Computational Time Steps in a Physically Based Distributed Rainfall–Runoff Model

Water ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 1269 ◽  
Author(s):  
Yun Choi ◽  
Mun-Ju Shin ◽  
Kyung Kim
Keyword(s):  
Optimal Parameter ◽  
Computational Time ◽  
Rainfall Runoff ◽  
Runoff Simulation ◽  
Stream Network ◽  
Time Step ◽  
Simulation Results ◽  
Rainfall Runoff Model ◽  
Parameter Values ◽  
Runoff Model

The choice of the computational time step (dt) value and the method for setting dt can have a bearing on the accuracy and performance of a simulation, and this effect has not been comprehensively researched across different simulation conditions. In this study, the effects of the fixed time step (FTS) method and the automatic time step (ATS) method on the simulated runoff of a distributed rainfall–runoff model were compared. The results revealed that the ATS method had less peak flow variability than the FTS method for the virtual catchment. In the FTS method, the difference in time step had more impact on the runoff simulation results than the other factors such as differences in the amount of rainfall, the density of the stream network, or the spatial resolution of the input data. Different optimal parameter values according to the computational time step were found when FTS and ATS were used in a real catchment, and the changes in the optimal parameter values were smaller in ATS than in FTS. The results of our analyses can help to yield reliable runoff simulation results.

Satellite soil moisture improves rainfall just where needed

2020 ◽  
Author(s):  
Luca Brocca ◽  
Stefania Camici ◽  
Christian Massari ◽  
Luca Ciabatta ◽  
Paolo Filippucci ◽  
...  
Keyword(s):  
Soil Moisture ◽  
River Discharge ◽  
Large Scale ◽  
River Flow ◽  
Global Scale ◽  
Rain Gauge ◽  
Rainfall Runoff ◽  
Global Precipitation Climatology Centre ◽  
Satellite Rainfall ◽  
Global Precipitation

<p>Soil moisture is a fundamental variable in the water and energy cycle and its knowledge in many applications is crucial. In the last decade, some authors have proposed the use of satellite soil moisture for estimating and improving rainfall, doing hydrology backward. From this research idea, several studies have been published and currently preoperational satellite rainfall products exploiting satellite soil moisture products have been made available.</p><p>The assessment of such products on a global scale has revealed an important result, i.e., the soil moisture based products perform better than state of the art products exactly over regions in which the data are needed: Africa and South America. However, over these areas the assessment against rain gauge observations is problematic and independent approaches are needed to assess the quality of such products and their potential benefit in hydrological applications. On this basis, the use of the satellite rainfall products as input into rainfall-runoff models, and their indirect assessment through river discharge observations is an alternative and valuable approach for evaluating their quality.</p><p>For this study, a newly developed large scale dataset of river discharge observations over 500+ basins throughout Africa has been exploited. Based on such unique dataset, a large scale assessment of multiple near real time satellite rainfall products has been performed: (1) the Early Run version of the Integrated Multi-Satellite Retrievals for GPM (Global Precipitation Measurement), IMERG Early Run, (2) SM2RAIN-ASCAT (https://doi.org/10.5281/zenodo.3405563), and (3) GPM+SM2RAIN (http://doi.org/10.5281/zenodo.3345323). Additionally, gauge-based and reanalysis rainfall products have been considered, i.e., (4) the Global Precipitation Climatology Centre (GPCC), and (5) the latest European Centre for Medium-Range Weather Forecasts reanalysis, ERA5. As rainfall-runoff model, the semi-distributed MISDc (Modello Idrologico Semi-Distribuito in continuo) model has been employed in the period 2007-2018 at daily temporal scale.</p><p>First results over a part of the dataset reveal the great value of satellite soil moisture products in improving satellite rainfall estimates for river flow prediction in Africa. Such results highlight the need to exploit such products for operational systems in Africa addressed to the mitigation of the flood risk and water resources management.</p>

scholarly journals Evaluation of High-Resolution Satellite Rainfall Products through Streamflow Simulation in a Hydrological Modeling of a Small Mountainous Watershed in Ethiopia

2012 ◽  
Vol 13 (1) ◽  
pp. 338-350 ◽  
Author(s):  
Menberu M. Bitew ◽  
Mekonnen Gebremichael ◽  
Lula T. Ghebremichael ◽  
Yared A. Bayissa
Keyword(s):  
High Resolution ◽  
Real Time ◽  
Bias Correction ◽  
Hydrological Modeling ◽  
Rain Gauge ◽  
Hydrologic Model ◽  
Model Simulations ◽  
Mountainous Watershed ◽  
Satellite Rainfall ◽  
Rainfall Estimates

Abstract This study focuses on evaluating four widely used global high-resolution satellite rainfall products [the Climate Prediction Center’s morphing technique (CMORPH) product, the Tropical Rainfall Measuring Mission (TRMM) Multisatellite Precipitation Analysis (TMPA) near-real-time product (3B42RT), the TMPA method post-real-time research version product (3B42), and the Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks (PERSIANN) product] with a spatial resolution of 0.25° and temporal resolution of 3 h through their streamflow simulations in the Soil and Water Assessment Tool (SWAT) hydrologic model of a 299-km2 mountainous watershed in Ethiopia. Results show significant biases in the satellite rainfall estimates. The 3B42RT and CMORPH products perform better than the 3B42 and PERSIANN. The predictive ability of each of the satellite rainfall was examined using a SWAT model calibrated in two different approaches: with rain gauge rainfall as input, and with each of the satellite rainfall products as input. Significant improvements in model streamflow simulations are obtained when the model is calibrated with input-specific rainfall data than with rain gauge data. Calibrating SWAT with satellite rainfall estimates results in curve number values that are by far higher than the standard tabulated values, and therefore caution must be exercised when using standard tabulated parameter values with satellite rainfall inputs. The study also reveals that bias correction of satellite rainfall estimates significantly improves the model simulations. The best-performing model simulations based on satellite rainfall inputs are obtained after bias correction and model recalibration.

scholarly journals Assessment of satellite rainfall products for streamflow simulation in medium watersheds of the Ethiopian highlands

2011 ◽  
Vol 15 (4) ◽  
pp. 1147-1155 ◽  
Author(s):  
M. M. Bitew ◽  
M. Gebremichael
Keyword(s):  
Rain Gauge ◽  
Model Parameters ◽  
Distributed Hydrological Model ◽  
Ethiopian Highlands ◽  
Watershed Area ◽  
Daily Streamflow ◽  
Study Results ◽  
Satellite Rainfall ◽  
Streamflow Simulation ◽  
Better Than

Abstract. The objective is to assess the suitability of commonly used high-resolution satellite rainfall products (CMORPH, TMPA 3B42RT, TMPA 3B42 and PERSIANN) as input to the semi-distributed hydrological model SWAT for daily streamflow simulation in two watersheds (Koga at 299 km2 and Gilgel Abay at 1656 km2) of the Ethiopian highlands. First, the model is calibrated for each watershed with respect to each rainfall product input for the period 2003–2004. Then daily streamflow simulations for the validation period 2006–2007 are made from SWAT using rainfall input from each source and corresponding model parameters; comparison of the simulations to the observed streamflow at the outlet of each watershed forms the basis for the conclusions of this study. Results reveal that the utility of satellite rainfall products as input to SWAT for daily streamflow simulation strongly depends on the product type. The 3B42RT and CMORPH simulations show consistent and modest skills in their simulations but underestimate the large flood peaks, while the 3B42 and PERSIANN simulations have inconsistent performance with poor or no skills. Not only are the microwave-based algorithms (3B42RT, CMORPH) better than the infrared-based algorithm (PERSIANN), but the infrared-based algorithm PERSIANN also has poor or no skills for streamflow simulations. The satellite-only product (3B42RT) performs much better than the satellite-gauge product (3B42), indicating that the algorithm used to incorporate rain gauge information with the goal of improving the accuracy of the satellite rainfall products is actually making the products worse, pointing to problems in the algorithm. The effect of watershed area on the suitability of satellite rainfall products for streamflow simulation also depends on the rainfall product. Increasing the watershed area from 299 km2 to 1656 km2 improves the simulations obtained from the 3B42RT and CMORPH (i.e. products that are more reliable and consistent) rainfall inputs while it deteriorates the simulations obtained from the 3B42 and PERSIANN (i.e. products that are unstable and inconsistent) rainfall inputs.

scholarly journals Analysis of Rainfall-Runoff Characteristics on Bias Correction Method of Climate Change Scenarios

2015 ◽  
Vol 31 (3) ◽  
pp. 241-252 ◽  
Author(s):  
Donghyuk Kum ◽  
Younsik Park ◽  
Young Hun Jung ◽  
Min Hwan Shin ◽  
Jichul Ryu ◽  
...  
Keyword(s):  
Climate Change ◽  
Bias Correction ◽  
Correction Method ◽  
Climate Change Scenarios ◽  
Rainfall Runoff ◽  
Bias Correction Method

scholarly journals Bias correction schemes for CMORPH satellite rainfall estimates in the Zambezi River Basin

2016 ◽  
Author(s):  
W. Gumindoga ◽  
T. H. M. Rientjes ◽  
A. T. Haile ◽  
H. Makurira ◽  
P. Reggiani
Keyword(s):  
River Basin ◽  
Bias Correction ◽  
Large Scale ◽  
Statistical Error ◽  
Correction Method ◽  
Correction Scheme ◽  
Satellite Rainfall ◽  
Zambezi River Basin ◽  
Rainfall Estimates ◽  
Zambezi River

Abstract. Obtaining reliable records of rainfall from satellite rainfall estimates (SREs) is a challenge as SREs are an indirect rainfall estimate from visible, infrared (IR), and/or microwave (MW) based information of cloud properties. SREs also contain inherent biases which exaggerate or underestimate actual rainfall values hence the need to apply bias correction methods to improve accuracies. We evaluate the performance of five bias correction schemes for CMORPH satellite-based rainfall estimates. We use 54 raingauge stations in the Zambezi Basin for the period 1998–2013 for comparison and correction. Analysis shows that SREs better match to gauged estimates in the Upper Zambezi Basin than the Lower and Middle Zambezi basins but performance is not clearly related to elevation. Findings indicate that rainfall in the Upper Zambezi Basin is best estimated by an additive bias correction scheme (Distribution transformation). The linear based (Spatio-temporal) bias correction scheme successfully corrected the daily mean of CMORPH estimates for 70 % of the stations and also was most effective in reducing the rainfall bias. The nonlinear bias correction schemes (Power transform and the Quantile based empirical-statistical error correction method) proved most effective in reproducing the rainfall totals. Analyses through bias correction indicate that bias of CMORPH estimates has elevation and seasonality tendencies across the Zambezi river basin area of large scale.

Sign in / Sign up

Export Citation Format

Share Document