scholarly journals 3D-Printed Bioactive Calcium Silicate/Poly-ε-Caprolactone Bioscaffolds Modified with Biomimetic Extracellular Matrices for Bone Regeneration

2019 ◽  
Vol 20 (4) ◽  
pp. 942 ◽  
Author(s):  
Yuan-Haw Wu ◽  
Yung-Cheng Chiu ◽  
Yen-Hong Lin ◽  
Chia-Che Ho ◽  
Ming-You Shie ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Bone Tissue ◽  
Calcium Silicate ◽  
Interleukin 1 ◽  
Orthopedic Implants ◽  
Cellular Adhesion ◽  
Bone Tissue Regeneration ◽  
Necrosis Factor Alpha ◽  
Mg63 Cells ◽  
3D Printed

Currently, clinically available orthopedic implants are extremely biocompatible but they lack specific biological characteristics that allow for further interaction with surrounding tissues. The extracellular matrix (ECM)-coated scaffolds have received considerable interest for bone regeneration due to their ability in upregulating regenerative cellular behaviors. This study delves into the designing and fabrication of three-dimensional (3D)-printed scaffolds that were made out of calcium silicate (CS), polycaprolactone (PCL), and decellularized ECM (dECM) from MG63 cells, generating a promising bone tissue engineering strategy that revolves around the concept of enhancing osteogenesis by creating an osteoinductive microenvironment with osteogenesis-promoting dECM. We cultured MG63 on scaffolds to obtain a dECM-coated CS/PCL scaffold and further studied the biological performance of the dECM hybrid scaffolds. The results indicated that the dECM-coated CS/PCL scaffolds exhibited excellent biocompatibility and effectively enhanced cellular adhesion, proliferation, and differentiation of human Wharton’s Jelly mesenchymal stem cells by increasing the expression of osteogenic-related genes. They also presented anti-inflammatory characteristics by showing a decrease in the expression of tumor necrosis factor-alpha (TNF-α) and interleukin-1 (IL-1). Histological analysis of in vivo experiments presented excellent bone regenerative capabilities of the dECM-coated scaffold. Overall, our work presented a promising technique for producing bioscaffolds that can augment bone tissue regeneration in numerous aspects.

Bone tissue engineering in the greater omentum with computer-aided design/computer-aided manufacturing scaffolds is enhanced by a periosteum transplant

2020 ◽  
Author(s):  
Hendrik Naujokat ◽  
Klaas Loger ◽  
Juliane Schulz ◽  
Yahya Açil ◽  
Jörg Wiltfang
Keyword(s):  
Bone Formation ◽  
Bone Tissue ◽  
Computer Aided Design ◽  
Bone Tissue Regeneration ◽  
Histological Evaluation ◽  
Greater Omentum ◽  
Collagen Membrane ◽  
Computer Aided ◽  
3D Printed ◽  
The Impact

Aim: This study aimed to evaluate two different vascularized bone flap scaffolds and the impact of two barrier membranes for the reconstruction of critical-size bone defects. Materials & methods: 3D-printed scaffolds of biodegradable calcium phosphate and bioinert titanium were loaded with rhBMP-2 bone marrow aspirate, wrapped by a collagen membrane or a periosteum transplant and implanted into the greater omentum of miniature pigs. Results: Histological evaluation demonstrated significant bone formation within the first 8 weeks in both scaffolds. The periosteum transplant led to enhanced bone formation and a homogenous distribution in the scaffolds. The omentum tissue grew out a robust vascular supply. Conclusion: Endocultivation using 3D-printed scaffolds in the greater omentum is a very promising approach in defect-specific bone tissue regeneration.

scholarly journals Hyaluronic acid as a bioactive component for bone tissue regeneration: Fabrication, modification, properties, and biological functions

2020 ◽  
Vol 9 (1) ◽  
pp. 1059-1079
Author(s):  
Fei Xing ◽  
Changchun Zhou ◽  
Didi Hui ◽  
Colin Du ◽  
Lina Wu ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Wound Repair ◽  
Bone Tissue Regeneration ◽  
Biological Functions ◽  
Bioactive Polymers ◽  
Bioactive Component ◽  
Good Potential ◽  
Processing Properties

AbstractHyaluronic acid (HA) is widely distributed in the human body, and it is heavily involved in many physiological functions such as tissue hydration, wound repair, and cell migration. In recent years, HA and its derivatives have been widely used as advanced bioactive polymers for bone regeneration. Many medical products containing HA have been developed because this natural polymer has been proven to be nontoxic, noninflammatory, biodegradable, and biocompatible. Moreover, HA-based composite scaffolds have shown good potential for promoting osteogenesis and mineralization. Recently, many HA-based biomaterials have been fabricated for bone regeneration by combining with electrospinning and 3D printing technology. In this review, the polymer structures, processing, properties, and applications in bone tissue engineering are summarized. The challenges and prospects of HA polymers are also discussed.

scholarly journals Therapeutic Effects of the Addition of Fibroblast Growth Factor-2 to Biodegradable Gelatin/Magnesium-Doped Calcium Silicate Hybrid 3D-Printed Scaffold with Enhanced Osteogenic Capabilities for Critical Bone Defect Restoration

Biomedicines ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 712
Author(s):  
Wei-Yun Lai ◽  
Yen-Jen Chen ◽  
Alvin Kai-Xing Lee ◽  
Yen-Hong Lin ◽  
Yu-Wei Liu ◽  
...  
Keyword(s):  
Growth Factor ◽  
Fibroblast Growth Factor ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Calcium Silicate ◽  
Clinical Applications ◽  
Fibroblast Growth Factor 2 ◽  
Therapeutic Effects ◽  
Fibroblast Growth ◽  
3D Printed

Worldwide, the number of bone fractures due to traumatic and accidental injuries is increasing exponentially. In fact, repairing critical large bone defects remains challenging due to a high risk of delayed union or even nonunion. Among the many bioceramics available for clinical use, calcium silicate-based (CS) bioceramics have gained popularity due to their good bioactivity and ability to stimulate cell behavior. In order to improve the shortcomings of 3D-printed ceramic scaffolds, which do not easily carry growth factors and do not provide good tissue regeneration effects, the aim of this study was to use a gelatin-coated 3D-printed magnesium-doped calcium silicate (MgCS) scaffold with genipin cross-linking for regulating degradation, improving mechanical properties, and enhancing osteogenesis behavior. In addition, we consider the effects of fibroblast growth factor-2 (FGF-2) loaded into an MgCS scaffold with and without gelatin coating. Furthermore, we cultured the human Wharton jelly-derived mesenchymal stem cells (WJMSC) on the scaffolds and observed the biocompatibility, alkaline phosphatase activity, and osteogenic-related markers. Finally, the in vivo performance was assessed using micro-CT and histological data that revealed that the hybrid bioscaffolds were able to further achieve more effective bone tissue regeneration than has been the case in the past. The above results demonstrated that this type of processing had great potential for future clinical applications and studies and can be used as a potential alternative for future bone tissue engineering research, as well as having good potential for clinical applications.

Engineering 3D printed bioactive composite scaffolds based on the combination of aliphatic polyester and calcium phosphates for bone tissue regeneration

2021 ◽  
Vol 122 ◽  
pp. 111928
Author(s):  
Eduardo H. Backes ◽  
Emanuel M. Fernandes ◽  
Gabriela S. Diogo ◽  
Catarina F. Marques ◽  
Tiago H. Silva ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Calcium Phosphates ◽  
Bone Tissue Regeneration ◽  
Aliphatic Polyester ◽  
Composite Scaffolds ◽  
3D Printed

Redefining architectural effects in 3D printed scaffolds through rational design for optimal bone tissue regeneration

2021 ◽  
Vol 25 ◽  
pp. 101168
Author(s):  
Mohammad Mirkhalaf ◽  
Xiao Wang ◽  
Ali Entezari ◽  
Colin R. Dunstan ◽  
Xinquan Jiang ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Rational Design ◽  
Bone Tissue Regeneration ◽  
3D Printed ◽  
Architectural Effects

scholarly journals Biomimetic and osteogenic 3D silk fibroin composite scaffolds with nano MgO and mineralized hydroxyapatite for bone regeneration

2020 ◽  
Vol 11 ◽  
pp. 204173142096779
Author(s):  
Ziquan Wu ◽  
Zhulong Meng ◽  
Qianjin Wu ◽  
Delu Zeng ◽  
Zhengdong Guo ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Bone Tissue ◽  
Silk Fibroin ◽  
Bone Repair ◽  
Composite Scaffold ◽  
Bone Tissue Regeneration ◽  
Bone Mesenchymal Stem Cells ◽  
Differentiation Potential ◽  
Composite Effect ◽  
Sd Rat

Artificial bioactive materials have received increasing attention worldwide in clinical orthopedics to repair bone defects that are caused by trauma, infections or tumors, especially dedicated to the multifunctional composite effect of materials. In this study, a weakly alkaline, biomimetic and osteogenic, three-dimensional composite scaffold (3DS) with hydroxyapatite (HAp) and nano magnesium oxide (MgO) embedded in fiber (F) of silkworm cocoon and silk fibroin (SF) is evaluated comprehensively for its bone repair potential in vivo and in vitro experiments, particularly focusing on the combined effect between HAp and MgO. Magnesium ions (Mg2+) has long been proven to promote bone tissue regeneration, and HAp is provided with osteoconductive properties. Interestingly, the weak alkaline microenvironment from MgO may also be crucial to promote Sprague-Dawley (SD) rat bone mesenchymal stem cells (BMSCs) proliferation, osteogenic differentiation and alkaline phosphatase (ALP) activities. This SF/F/HAp/nano MgO (SFFHM) 3DS with superior biocompatibility and biodegradability has better mechanical properties, BMSCs proliferation ability, osteogenic activity and differentiation potential compared with the scaffolds adding HAp or MgO alone or neither. Similarly, corresponding meaningful results are also demonstrated in a model of distal lateral femoral defect in SD rat. Therefore, we provide a promising 3D composite scaffold for promoting bone regeneration applications in bone tissue engineering.

scholarly journals Bone Regeneration in Critical-Sized Bone Defects Treated with Additively Manufactured Porous Metallic Biomaterials: The Effects of Inelastic Mechanical Properties

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1992
Author(s):  
Marianne Koolen ◽  
Saber Amin Yavari ◽  
Karel Lietaert ◽  
Ruben Wauthle ◽  
Amir A. Zadpoor ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bulk Material ◽  
Bone Tissue Regeneration ◽  
Bony Tissue ◽  
Metallic Biomaterials ◽  
Cp Ti ◽  
Porous Biomaterials

Additively manufactured (AM) porous metallic biomaterials, in general, and AM porous titanium, in particular, have recently emerged as promising candidates for bone substitution. The porous design of such materials allows for mimicking the elastic mechanical properties of native bone tissue and showed to be effective in improving bone regeneration. It is, however, not clear what role the other mechanical properties of the bulk material such as ductility play in the performance of such biomaterials. In this study, we compared the bone tissue regeneration performance of AM porous biomaterials made from the commonly used titanium alloy Ti6Al4V-ELI with that of commercially pure titanium (CP-Ti). CP-Ti was selected because of its high ductility as compared to Ti6Al4V-ELI. Critical-sized (6 mm diameter) femoral defects in rats were treated with implants made from both Ti6Al4V-ELI and CP-Ti. Bone regeneration was assessed up to 11 weeks using micro-CT scanning. The regenerated bone volume was assessed ex vivo followed by histology and biomechanical testing to assess osseointegration of the implants. The bony defects treated with AM CP-Ti implants generally showed higher volumes of regenerated bone as compared to those treated with AM Ti6Al4V-ELI. The torsional strength of the two titanium groups were similar however, and both considerably lower than those measured for intact bony tissue. These findings show the importance of material type and ductility of the bulk material in the ability for bone tissue regeneration of AM porous biomaterials.

Sign in / Sign up

Export Citation Format

Share Document