scholarly journals Accuracy of Computer-Aided Dynamic Navigation Compared to Computer-Aided Static Procedure for Endodontic Access Cavities: An In Vitro Study

2020 ◽  
Vol 9 (1) ◽  
pp. 129 ◽  
Author(s):  
Álvaro Zubizarreta-Macho ◽  
Ana de Pedro Muñoz ◽  
Elena Riad Deglow ◽  
Rubén Agustín-Panadero ◽  
Jesús Mena Álvarez
Keyword(s):  
Navigation System ◽  
In Vitro Study ◽  
Study Groups ◽  
T Test ◽  
Anterior Teeth ◽  
Planning Software ◽  
Computer Aided ◽  
Dynamic Navigation ◽  
Group B

Purpose: To analyze the accuracy of two computer-aided navigation techniques to guide the performance of endodontic access cavities compared with the conventional access procedure. Materials and Methods: A total of 30 single-rooted anterior teeth were selected, which were randomly distributed into three study groups: Group A—guided performance of endodontic access cavities through computer-aided static navigation system (n = 10) (SN); Group B—guided performance of endodontic access cavities through computer-aided dynamic navigation system (n = 10) (DN); and Group C—manual (freehand) performance of endodontic access cavities (n = 10) (MN). The endodontic access cavities of the SN group were performed with a stereolithography template designed on 3D implant planning software, based on preoperative cone-beam computed tomography (CBCT) and a 3D extraoral surface scan, and endodontic access cavities of the DN group were planned and performed by the dynamic navigation system. After endodontic access cavities were performed, a second CBCT was done, and the degree of accuracy between the planned and performed endodontic access cavities was analyzed using therapeutic planning software and Student’s t-test. Results: Paired t-test revealed no statistically significant differences between SN and DN at the coronal (p = 0.6542), apical (p = 0.9144), or angular (p = 0.0724) level; however, statistically significant differences were observed between the two computer-aided navigation techniques and the MN group at the coronal (p < 0.0001), apical (p < 0.0001), and angular (p < 0.0001) level. Conclusion: Both computer-aided static and dynamic navigation procedures allowed accurate performance of endodontic access cavities.

scholarly journals Accuracy of Computer-Aided Dynamic Navigation Compared to Computer-Aided Static Navigation for Dental Implant Placement: An In Vitro Study

2019 ◽  
Vol 8 (12) ◽  
pp. 2123 ◽  
Author(s):  
Alfonso Mediavilla Guzmán ◽  
Elena Riad Deglow ◽  
Álvaro Zubizarreta-Macho ◽  
Rubén Agustín-Panadero ◽  
Sofía Hernández Montero
Keyword(s):  
Dental Implants ◽  
Dental Implant ◽  
Navigation System ◽  
T Test ◽  
Implant Placement ◽  
Planning Software ◽  
Computer Aided ◽  
Dynamic Navigation ◽  
Group A ◽  
Group B

Aim: To analyze the accuracy capability of two computer-aided navigation procedures for dental implant placement. Materials and Methods: A total of 40 dental implants were selected, which were randomly distributed into two study groups, namely, group A, consisting of those implants that were placed using a computer-aided static navigation system (n = 20) (guided implant (GI)) and group B, consisting of those implants that were placed using a computer-aided dynamic navigation system (n = 20) (navigation implant (NI)). The placement of the implants from group A was performed using surgical templates that were designed using 3D implant-planning software based on preoperative cone-beam computed tomography (CBCT) and a 3D extraoral surface scan, and the placement of group B implants was planned and performed using the dynamic navigation system. After placing the dental implants, a second CBCT was performed and the degree of accuracy of the planning and placement of the implants was analyzed using therapeutic planning software and Student’s t-test. Results: The paired t-test revealed no statistically significant differences between GI and NI at the coronal (p = 0.6535) and apical (p = 0.9081) levels; however, statistically significant differences were observed between the angular deviations of GI and NI (p = 0.0272). Conclusion: Both computer-aided static and dynamic navigation procedures allow accurate implant placement.

scholarly journals Influence of the Digital Mock-Up and Experience on the Ability to Determine the Prosthetically Correct Dental Implant Position during Digital Planning: An In Vitro Study

2019 ◽  
Vol 9 (1) ◽  
pp. 48
Author(s):  
Miriam O’Connor Esteban ◽  
Elena Riad Deglow ◽  
Álvaro Zubizarreta-Macho ◽  
Sofía Hernández Montero
Keyword(s):  
Dental Implants ◽  
Dental Implant ◽  
In Vitro Study ◽  
Study Groups ◽  
T Test ◽  
Dental Surgery ◽  
Operator Experience ◽  
Planning Software ◽  
Before And After

The purpose of this study was to analyze the influence of the digital mock-up and operator experience on the dental implant planning position. A total of 200 dental implants were planned, which were distributed into two study groups: A. dental implant planning by dental surgeons with 5–10 years of experience (n = 80); and B. dental implant planning by dental surgery students without experience (n = 120). Operators were required to plan eight dental implants in the same maxillary edentulous case uploaded in 3D implant-planning software, before and after using the digital mock-up. Deviations between the dental implant planning positions before and after using the digital mock-up were analyzed at platform, apical and angular levels, and were analyzed using a 3D implant-planning software using Student’s t test. The paired t-test revealed statistically significant differences between the deviation levels of participants with 5–10 years’ experience and no experience at the platform, apical and angular levels. Digital mock-ups allow for more accurate dental implant planning regardless of the experience of the operator. Nevertheless, they are more useful for operators without dental surgery experience.

scholarly journals A Comparative Analysis of the Piezoelectric Ultrasonic Appliance and Trephine Bur for Apical Location: An In Vitro Study

2021 ◽  
Vol 11 (10) ◽  
pp. 1034
Author(s):  
Esther Cáceres Madroño ◽  
Paulina Rodríguez Torres ◽  
Soraya Oussama ◽  
Álvaro Zubizarreta-Macho ◽  
María Bufalá Pérez ◽  
...  
Keyword(s):  
Study Groups ◽  
Experimental Models ◽  
Site Preparation ◽  
T Test ◽  
Entry Point ◽  
Osteotomy Site ◽  
End Point ◽  
Planning Software ◽  
Preparation Techniques

To compare and contrast the accuracy of piezoelectric ultrasonic insert (PUI) and trephine bur (TB) osteotomy site preparation techniques for apical location. (1) Material and methods: A total of 138 osteotomy site preparations were randomly distributed into one of two study groups. Group A: TB technique (n = 69) and B: PUI technique (n = 69). A preoperative cone-beam computed tomography scan and an intraoral scan were performed and uploaded to implant-planning software to plan the virtual osteotomy site preparations for apical location. Subsequently, the osteotomy site preparations were performed in the experimental models with both osteotomy site preparation techniques and a postoperative CBCT scan was performed and uploaded into the implant-planning software and matched with the virtually planned osteotomy site preparations to measure the deviation angle and horizontal deviation as captured at the coronal entry point and apical end-point between osteotomy site preparations using Student’s t-test statistical analysis. (2) Results: The paired t-test found statistically significant differences at the coronal entry-point deviations (p = 0.0104) and apical end-point deviations (p = 0.0104) between the TB and PUI study groups; however, no statistically significant differences were found in the angular deviations (p = 0.309) between the trephine bur and piezoelectric ultrasonic insert study groups. (3) Conclusions: The results showed that the TB is more accurate than the PUI for apical location.

scholarly journals Influence of the Computer-Aided Static Navigation Technique and Mixed Reality Technology on the Accuracy of the Orthodontic Micro-Screws Placement. An In Vitro Study

2021 ◽  
Vol 11 (10) ◽  
pp. 964
Author(s):  
Elena Riad Deglow ◽  
Sergio Toledano Gil ◽  
Álvaro Zubizarreta-Macho ◽  
María Bufalá Pérez ◽  
Paulina Rodríguez Torres ◽  
...  
Keyword(s):  
Mixed Reality ◽  
Intraoperative Complications ◽  
In Vitro Study ◽  
Study Groups ◽  
Entry Point ◽  
Screw Placement ◽  
Freehand Technique ◽  
Computer Aided ◽  
Mr Study

To analyze the effect of a computer-aided static navigation technique and mixed reality technology on the accuracy of orthodontic micro-screw placement. Material and methods: Two hundred and seven orthodontic micro-screws were placed using either a computer-aided static navigation technique (NAV), a mixed reality device (MR), or a conventional freehand technique (FHT). Accuracy across different dental sectors was also analyzed. CBCT and intraoral scans were taken both prior to and following orthodontic micro-screw placement. The deviation angle and horizontal deviation were then analyzed; these measurements were taken at the coronal entry point and apical endpoint between the planned and performed orthodontic micro-screws. In addition, any complications resulting from micro-screw placement, such as spot perforations, were also analyzed across all dental sectors. Results: The statistical analysis showed significant differences between study groups with regard to the coronal entry-point (p < 0.001). The NAV study group showed statistically significant differences from the FHT (p < 0.001) and MR study groups (p < 0.001) at the apical end-point (p < 0.001), and the FHT group found significant differences from the angular deviations of the NAV (p < 0.001) and MR study groups deviations (p = 0.0011). Different dental sectors also differed significantly. (p < 0.001) Additionally, twelve root perforations were observed in the FHT group, while there were no root perforations in the NAV group. Conclusions: Computer-aided static navigation technique enable more accurate orthodontic micro-screw placement and fewer intraoperative complications when compared with the mixed reality technology and conventional freehand techniques.

scholarly journals Influence of the Computer-Aided Static Navigation Technique on the Accuracy of the Orthodontic Micro-Screws Placement: An In Vitro Study

2021 ◽  
Vol 10 (18) ◽  
pp. 4127
Author(s):  
Paulina Rodríguez Torres ◽  
Sergio Toledano Gil ◽  
Álvaro Zubizarreta-Macho ◽  
María Bufalá Pérez ◽  
Elena Riad Deglow ◽  
...  
Keyword(s):  
Intraoperative Complications ◽  
In Vitro Study ◽  
Study Groups ◽  
Entry Point ◽  
Screw Placement ◽  
Study Group ◽  
Freehand Technique ◽  
Computer Aided ◽  
Group A

To analyze the influence of the computer-aided static navigation technique on the accuracy of placement of orthodontic micro-screws. One hundred and thirty-eight orthodontic micro-screws were randomly assigned to the following study groups: Group A. orthodontic micro-screw placement using a computer-aided static navigation technique (n = 69); B. orthodontic micro-screw placement using the conventional freehand technique (n = 69). In addition, the accuracy in the canine–premolar, premolar and molar sectors was analyzed in each study group. Cone-beam computed tomography and intraoral scans were taken both prior and subsequent to orthodontic micro-screw placement. The images were then uploaded using a 3D implant planning software, where the deviation and horizontal angles were analyzed using a multivariate linear model. These measurements were taken at the coronal entry point and apical endpoint between the planned orthodontic micro-screws. In addition, any complications resulting from micro-screw placement, such as spot perforations, were also analyzed in all dental sectors. The statistical analysis showed significant differences between the two study groups with regard to the coronal entry-point, apical end-point (p < 0.001) and angular deviations (p < 0.001) between the computer-aided static navigation technique and freehand technique study groups. Moreover, statistically significant differences were showed between the different dental sectors (p < 0.001). Additionally, twelve root perforations were observed at the conventional free hand technique study group while there were no root perforations in the computer-aided static navigation technique study group. The results showed that the computer-aided static navigation technique enables a more accurate orthodontic micro-screw placement with less intraoperative complications when compared with the conventional freehand technique.

Comparative Study to Evaluate the Surface Detail Reproduction of Dental Stone after Immersion in Various Different Disinfectant Solutions, Under Stereomicroscope 10 X Magnification –An In-Vitro Study

2017 ◽  
Vol 9 (3) ◽  
Author(s):  
Rathika Rai ◽  
M. A. Easwaran ◽  
K. T. Dhivya
Keyword(s):  
Sodium Hypochlorite ◽  
In Vitro Study ◽  
Control Group ◽  
Immersion Method ◽  
Significant Difference ◽  
Surface Irregularities ◽  
Disinfectant Solution ◽  
Surface Detail ◽  
Group B

Aim: To evaluate the surface detail reproduction of dental stone this is immersed in different disinfectant solution and studied under stereomicroscope. Methodology: Total number of 30 specimens of dental stone (Type III) were made with measurements of 1.5cm diameter and 1cm height .This samples are divided in to 3 groups group A,B,C. were A is immersed in Distilled water which was taken as control group ;B is immersed in 2% Glutaraldehyde and C is immersed in 5%sodium hypochlorite. Each specimen were immersed in the disinfectant solution for 15 minutes and dried under room temperature for 24 hrs. After 24 hrs each specimens are studied under stereomicroscope for surface details. Result: The results showed no significant difference in the surface irregularities and porosities for a group 1 and group 2 except group 3 which showed significant increase in the porosities, surface irregularities and erosions after disinfection with 5% NaHOCl by immersion method. Conclusion: The surface detail reproduction capacity of die stone was adversely affected when 5% Sodium hypochlorite was used as disinfectant solution when compare d to control group and 2% Glutaraldehyde

scholarly journals An in-vitro study to evaluate the accuracy of dies obtained from dual arch impression trays using addition silicone impression material and tray combinations

2015 ◽  
Vol 12 (2) ◽  
pp. 111-117
Author(s):  
P K Parajuli ◽  
S George ◽  
V Shenoy
Keyword(s):  
In Vitro Study ◽  
Dimensional Accuracy ◽  
Acrylic Resin ◽  
Simultaneous Recording ◽  
T Test ◽  
Impression Material ◽  
Tooth Preparation ◽  
Made In ◽  
Plastic Trays

Background: Dual-arch impression technique allows the simultaneous recording of  tooth preparation, opposing anatomic tooth and maxillomandibular relationship. The  accuracy of reproduction of this easy and quick technique, however, has not been  studied in detail in past. Objective: To compare the accuracy of the impressions  made by using the same impression material in dual arch plastic trays, dual-arch  metal trays and acrylic resin custom trays. Methods: The dies obtained from the  addition silicone impressions made in dual-arch plastic trays, dual-arch metal trays  and full arch acrylic resin custom trays were compared for the dimensional accuracy  with the prepared typodont tooth as a control. Student’s paired t-test and unpaired  t-test were used for the data analyses using the Statistical Package for Social Studies  (SPSS) version 11.5. Results: The dies obtained from all the impression combinations  showed increased dimension (acrylic resin custom trays 9.4 mm±0.048, dual-arch  plastic trays 9.5 mm±0.035, dual-arch metal trays 9.41 mm±0.017) as compared to  the dimension of control (9.39 mm±0.007). Conclusion: All the tray-impression  material combinations showed variable accuracies. Full arch acrylic resin trays  resulted in greatest accuracy whereas dual-arch plastic trays the least accuracy.Health Renaissance 2014;12(2):  pp: 111-117

scholarly journals Comparison of the Remineralizing Effect of Brushing with Aloe vera versus Fluoride Toothpaste

2020 ◽  
Author(s):  
Teresa Al Haddad ◽  
Elie Khoury ◽  
Nada Farhat Mchayleh
Keyword(s):  
Repeated Measures ◽  
Aloe Vera ◽  
In Vitro Study ◽  
P Value ◽  
Fluoride Toothpaste ◽  
Before And After ◽  
The Difference ◽  
Group B ◽  
Ca:P Ratio

Abstract Objectives The aim of the present in vitro study is to compare the remineralization brushing effect of three toothpastes and Aloe vera (AV) gel. Materials and Methods Forty sound extracted teeth were placed in a demineralizing solution for 4 days and randomly assigned to four groups: group A: 1,450-ppm fluoride toothpaste; group B: AV nonfluoridated toothpaste; group C: AV 1,000-ppm fluoridated toothpaste; and group D: AV gel. A 3-minute pH cycling was performed twice a day for each group for 12 days. Specimens were analyzed before and after by scanning electron microscope—energy dispersive X-ray. Statistical analysis The outcomes were analyzed by Kolmogorov–Smirnov’s tests, repeated-measures analyses of variance followed by univariate analyses, and Bonferroni’s multiple comparisons tests to compare the calcium-to-phosphorus (Ca:P) ratio within time among toothpaste groups. Results Following remineralization, the Ca:P ratio increased in all groups. The difference of the Ca:P ratio was not significant between groups C, D, and A. The mean ratio was significantly lower in group B (p-value = 0.026). Conclusions The AV gel demonstrated a remineralization capacity equal to that of the 1,450-ppm fluoride toothpaste. In contrast, fluoride-free AV toothpaste showed a lower remineralization efficiency. Further studies are required to understand its mechanism.

scholarly journals Fluoride Concentration in SDF Commercial Products and Their Bioavailability with Demineralized Dentine

2020 ◽  
Vol 31 (3) ◽  
pp. 257-263
Author(s):  
Aline Laignier Soares-Yoshikawa ◽  
Jaime Aparecido Cury ◽  
Cínthia Pereira Machado Tabchoury
Keyword(s):  
Fluoride Concentration ◽  
In Vitro Study ◽  
Test Strip ◽  
T Test ◽  
The Other ◽  
Alkaline Ph ◽  
Commercial Products ◽  
Silver Diamine Fluoride ◽  
Direct Technique

Abstract The aim of this in vitro study was to determine the fluoride concentration in silver diamine fluoride (SDF) products and their bioavailability with demineralized dentine. The products evaluated (expected fluoride concentrations) were: I: Saforide 38% (45,283 ppm F); II: Advantage Arrest 38.3 to 43.2% (45,283 to 51,013 ppm F); III: Ancárie 12% (14,100 ppm F); IV: Ancárie 30% (35,400 ppm F), V: Cariestop 12% (14,100 ppm F) and VI: Cariestop 30% (35,400 ppm F). The fluoride concentration was evaluated using an ion-specific electrode (ISE) by direct technique, which was confirmed after microdiffusion. The pH of the products was determined with a pH test strip. For the bioavailability test, demineralized dentine slabs were treated with one of the products for 1 min. Loosely (CaF2-like) and firmly-bound fluoride (FAp) were determined. The fluoride concentration found in the products (mean±SD; ppm F) by the ISE direct technique was: I:53,491±554; II:57,249±1,851; III:4,814±268; IV:5,726±43; V:10,145±468; VI:11,858±575; these values were confirmed after microdiffusion (t-test; p>0.05) and disagree with the declared by the manufacturers. The pH of Ancárie 12 and 30% was 6.0 and 4.5, respectively, in disagreement with the alkaline pH expected for SDF solution and found in the other products evaluated. There was no correlation between either CaF2-like (r=0.221; p=0.337) or FAp (r=-0.144; p=0.830) formed in demineralized dentine and fluoride concentration found in the products. The problems of pH and fluoride concentration found in available professional commercial SDF products suggest that they are not under sanitary surveillance.

scholarly journals Microleakage of Packable Composites Used in Post Spaces Condensed Using Different Methods

2002 ◽  
Vol 3 (2) ◽  
pp. 23-30 ◽  
Author(s):  
Güliz Görgül ◽  
A. Cemal Tinaz ◽  
Tayfun Alaçam ◽  
Bağdagül H. Kivanç ◽  
Özgür Uzun
Keyword(s):  
Composite Resin ◽  
In Vitro Study ◽  
Root Canals ◽  
Dye Penetration ◽  
Anterior Teeth ◽  
Mechanical Hand ◽  
Dentin Bonding Agent ◽  
Etched Surface ◽  
Clinical Problems

Abstract The aim of this in vitro study was to evaluate the apical and coronal microleakage of a packable composite material compacted by either hand or ultrasonic condensers when placed in post spaces. Fortytwo extracted anterior teeth were used. After conventional obturation of the root canals, parallel post spaces 5 mm in depth and 2 mm in diameter were prepared using Gates Glidden and diamond burs. A primer and a dentin bonding agent (Prime & Bond NT) was applied to the etched surface for 30 seconds and light polymerized for 40 seconds. Surefil packable composite resin was inserted in four equal increments and each polymerized for 40 seconds. Half of the specimens were compacted with an ultrasonic tip and the other half with a mechanical hand compactor. After immersion in the dye, the teeth were sectioned longitudinally and dye penetration was evaluated using a stereomicroscope and microleakage recorded in mm. A One-Way Analysis of Variance indicated the two condensing methods were not statistically different (p>0.05). When microleakage was compared within groups, there was also no statistical difference between coronal or apical microleakage (p>0.05). In an in vitro environment, ultrasonic condensers do not offer any advantage over hand condensers. Both the coronal and apical portions of the root had microleakage indicating that regardless of the condensation method and the use of a packable composite, there is still microleakage that could potentially create further clinical problems. Citation Görgül G, Alaçam T, Kivanç BH, et. al. Microleakage of Packable Composites Used in Post Spaces Condensed Using Different Methods. J Contemp Dent Pract 2002 May;(3)2: 023-030.

Sign in / Sign up

Export Citation Format

Share Document