scholarly journals Basalt Fiber-Based Flame Retardant Epoxy Composites: Preparation, Thermal Properties, and Flame Retardancy

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 902
Author(s):  
Yu Guo ◽  
Meihui Zhou ◽  
Guang-Zhong Yin ◽  
Ehsan Kalali ◽  
Na Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Flame Retardant ◽  
Basalt Fiber ◽  
Mechanical Analysis ◽  
Epoxy Composites ◽  
Cone Calorimetry ◽  
Limiting Oxygen Index ◽  
Pre Treatment ◽  
The Impact

We aimed to study the impact of surface modification of basalt fiber (BF) on the mechanical properties of basalt fiber-based epoxy composites. Four different types of pretreatment approaches to BF were used; then a silane coupling agent (KH550) was applied to further modify the pretreated BF, prior to the preparation of epoxy resin (EP)/BF composites. The combination of acetone (pre-treatment) and KH550 (formal surface treatment) for basalt fiber (BT-AT) imparted the EP/BF composite with the best performance in both tensile and impact strengths. Subsequently, such modified BF was introduced into the flame-retardant epoxy composites (EP/AP750) to prepare basalt fiber reinforced flame-retardant epoxy composite (EP/AP750/BF-AT). The fire behaviors of the composites were evaluated by vertical burning test (UL-94), limiting oxygen index (LOI) test and cone calorimetry. In comparison to the flame-retardant properties of EP/AP750, the incorporation of BF-AT slightly reduced LOI value from 26.3% to 25.1%, maintained the good performance in vertical burning test, but increased the peak of the heat release rate. Besides, the thermal properties and mechanical properties of the composites were investigated by thermogravimetric analysis (TGA), universal tensile test, impact test and dynamic mechanical analysis (DMA).

scholarly journals Mechanical, Thermal and Rheological Properties of Polyethylene-Based Composites Filled with Micrometric Aluminum Powder

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1242
Author(s):  
Olga Mysiukiewicz ◽  
Paulina Kosmela ◽  
Mateusz Barczewski ◽  
Aleksander Hejna
Keyword(s):  
Mechanical Properties ◽  
Melt Flow Index ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Flow Index ◽  
Scanning Calorimetry ◽  
Metal Composites ◽  
Pre Treatment ◽  
The Impact ◽  
Properties Of Composites

Investigations related to polymer/metal composites are often limited to the analysis of the electrical and thermal conductivity of the materials. The presented study aims to analyze the impact of aluminum (Al) filler content (from 1 to 20 wt%) on the rarely investigated properties of composites based on the high-density polyethylene (HDPE) matrix. The crystalline structure, rheological (melt flow index and oscillatory rheometry), thermal (differential scanning calorimetry), as well as static (tensile tests, hardness, rebound resilience) and dynamic (dynamical mechanical analysis) mechanical properties of composites were investigated. The incorporation of 1 and 2 wt% of aluminum filler resulted in small enhancements of mechanical properties, while loadings of 5 and 10 wt% provided materials with a similar performance to neat HDPE. Such results were supported by the lack of disturbances in the rheological behavior of composites. The presented results indicate that a significant content of aluminum filler may be introduced into the HDPE matrix without additional pre-treatment and does not cause the deterioration of composites’ performance, which should be considered beneficial when engineering PE/metal composites.

scholarly journals Basalt Fiber Modified Ethylene Vinyl Acetate/Magnesium Hydroxide Composites with Balanced Flame Retardancy and Improved Mechanical Properties

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 2107
Author(s):  
Dongwei Yao ◽  
Guangzhong Yin ◽  
Qingqing Bi ◽  
Xu Yin ◽  
Na Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Vinyl Acetate ◽  
Magnesium Hydroxide ◽  
Performance Enhancement ◽  
Basalt Fiber ◽  
Ethylene Vinyl Acetate ◽  
Limiting Oxygen Index ◽  
Cone Calorimeter Test ◽  
Flame Retardant Properties

In this study, we selected basalt fiber (BF) as a functional filler to improve the mechanical properties of ethylene vinyl acetate (EVA)-based flame retardant materials. Firstly, BF was modified by grafting γ-aminopropyl triethoxysilane (KH550). Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (EDS) were used to comprehensively prove the successful modification of the BF surface. Subsequently, the modified BF was introduced into the EVA/magnesium hydroxide (MH) composites by melt blending. The limiting oxygen index (LOI), UL-94, cone calorimeter test, tensile test, and non-notched impact test were utilized to characterize both the flame retardant properties and mechanical properties of the EVA/MH composites. It was found that the mechanical properties were significantly enhanced without reducing the flame retardant properties of the EVA/MH composites. Notably, the surface treatment with silane is a simple and low-cost method for BF surface modification and the pathway designed in this study can be both practical and effective for polymer performance enhancement.

scholarly journals Mechanical and Fire Properties of Multicomponent Flame Retardant EPDM Rubbers Using Aluminum Trihydroxide, Ammonium Polyphosphate, and Polyaniline

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1932 ◽  
Author(s):  
Benjamin Zirnstein ◽  
Dietmar Schulze ◽  
Bernhard Schartel
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Cone Calorimeter ◽  
Average Rate ◽  
Multicomponent System ◽  
Ammonium Polyphosphate ◽  
Limiting Oxygen Index ◽  
Epdm Rubber ◽  
The Impact ◽  
Aluminum Trihydroxide

In this study, multicomponent flame retardant systems, consisting of ammonium polyphosphate (APP), aluminum trihydroxide (ATH), and polyaniline (PANI), were used in ethylene propylene diene monomer (EPDM) rubber. The multicomponent system was designed to improve flame retardancy and the mechanical properties of the rubber compounds, while simultaneously reducing the amount of filler. PANI was applied at low loadings (7 phr) and combined with the phosphorous APP (21 phr) and the mineral flame retardant ATH (50 phr). A comprehensive study of six EPDM rubbers was carried out by systematically varying the fillers to explain the impact of multicomponent flame retardant systems on mechanical properties. The six EPDM materials were investigated via the UL 94, limiting oxygen index (LOI), FMVSS 302, glow wire tests, and the cone calorimeter, showing that multicomponent flame retardant systems led to improved fire performance. In cone calorimeter tests the EPDM/APP/ATH/PANI composite reduced the maximum average rate of heat emission (MARHE) to 142 kW·m−2, a value 50% lower than that for the unfilled EPDM rubber. Furthermore, the amount of phosphorus in the residues was quantified and the mode of action of the phosphorous flame retardant APP was explained. The data from the cone calorimeter were used to determine the protective layer effect of the multicomponent flame retardant systems in the EPDM compounds.

Effect of carbon fiber amount and length on flame retardant and mechanical properties of intumescent polypropylene composites

2017 ◽  
Vol 52 (4) ◽  
pp. 519-530 ◽  
Author(s):  
Lemiye Atabek Savas ◽  
Aysenur Mutlu ◽  
Ali Sinan Dike ◽  
Umit Tayfun ◽  
Mehmet Dogan
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Carbon Fiber ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Mechanical Test ◽  
Mechanical Analysis ◽  
Limiting Oxygen Index ◽  
Polypropylene Composites ◽  
Index Value

The effects of carbon fiber amount and length were studied on the flame retardant, thermal, and mechanical properties of the intumescent polypropylene composites. The flame retardant properties of the intumescent polypropylene-based composites were investigated using limiting oxygen index, vertical burning test (UL-94), and mass loss calorimeter. The mechanical properties of the composites were studied using tensile test and dynamic mechanical analysis. According to the flammability tests results, the antagonistic interaction was observed between carbon fiber and ammonium polyphosphate. The limiting oxygen index value reduced steadily as the added amount of carbon fiber increased. Mechanical test results revealed that the addition of carbon fiber increased the tensile strength and the elastic modulus as the added amount increased. No effect of carbon fiber length was observed on the flammability, fire performance, and tensile properties of composites, whereas the elastic modulus increased as the carbon fiber initial length increased.

scholarly journals Effects of chemical pre-treatment on structure and property of polyacrylonitrile based pre-oxidized fibers

2020 ◽  
Vol 15 ◽  
pp. 155892501989894
Author(s):  
Xiaolu Sun ◽  
Jiayin Song ◽  
Jin Zhang ◽  
Jingyan Liu ◽  
Huizhen Ke ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Heat Release ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Energy Dispersive Spectrometer ◽  
Chemical Compositions ◽  
Limiting Oxygen Index ◽  
X Ray ◽  
Pre Treatment

Polyacrylonitrile-based pre-oxidized fibers with improved thermal stability, flame retardant, and mechanical properties were made from the pristine polyacrylonitrile fibers through chemical pretreatment followed by pre-oxidation in air. The morphological structure of the polyacrylonitrile-based pre-oxidized fibers was investigated by Fourier transfer infrared spectra, X-ray diffraction, scanning electron microscopy, and X-ray energy dispersive spectrometer. The changes of characteristic functional groups and chemical compositions confirmed the successful modification of the polyacrylonitrile fibers during pre-treatment. The grooves and cracks on the surface of polyacrylonitrile-based pre-oxidized fibers were remarkably decreased in comparison with that of pristine polyacrylonitrile fibers. The evolution of crystalline structure of the polyacrylonitrile fibers proved the occurrence of cyclization reactions during pre-oxidation. Meanwhile, thermal stability, flame retardant, and mechanical properties of polyacrylonitrile-based pre-oxidized fibers were also investigated by thermogravimetric analyzer, oxygen index meter, micro combustion calorimeter, and single fiber tensile tester, respectively. The results demonstrated that the polyacrylonitrile-based pre-oxidized fibers initially pre-treated by hydroxylamine hydrochloride, followed by monoethanolamine, had a high limiting oxygen index of 40.1 and breaking strength of 2.03 cN/dtex. The peak of heat release rate and total heat release of polyacrylonitrile-based pre-oxidized fibers decreased significantly while its charred residues increased, contributing to the improved flame retardant property.

scholarly journals Experimental Investigation of the Mechanical Properties and Fire Behavior of Epoxy Composites Reinforced by Fabrics and Powder Fillers

Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 738
Author(s):  
Kamila Sałasińska ◽  
Mikelis Kirpluks ◽  
Peteris Cabulis ◽  
Andrejs Kovalovs ◽  
Eduard Skukis ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Hybrid Composites ◽  
Fire Behavior ◽  
Epoxy Composites ◽  
Impact Behavior ◽  
Cone Calorimetry ◽  
Burning Behavior ◽  
Different Types ◽  
Flexural Tests ◽  
The Impact

Different types of fabrics, such as aramid (A), carbon (C), basalt (B), glass (G), and flax (F), as well as powder fillers, were used to manufacture the epoxy-based hybrid composites by the hand-lay-up method. In this work, a few research methods, including hardness, flexural tests, puncture impact behavior, as well as cone calorimetry (CC) measurements, were applied to determine the impact of type fillers and order of fabrics on the performance and burning behavior of hybrid composites. The mechanical properties were evaluated to correlate with the microstructure and consider together with thermogravimetric analysis (TGA) data.

scholarly journals Mechanical, Interfacial and Thermal Properties of Silica Aerogel-Infused Flax/Epoxy Composites

2021 ◽  
Vol 36 (1) ◽  
pp. 53-59
Author(s):  
R. M. Shahroze ◽  
M. Chandrasekar ◽  
K. Senthilkumar ◽  
T. Senthil Muthu Kumar ◽  
M. R. Ishak ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Silica Aerogel ◽  
Loss Modulus ◽  
Impact Resistance ◽  
Mechanical Analysis ◽  
Epoxy Composites ◽  
Damping Characteristics ◽  
Machine Parts ◽  
The Impact ◽  
Laminar Shear

Abstract The mechanical, interfacial and thermal properties of a flax/ epoxy composite incorporated with a silica aerogel (SA) at 0.5, 1.0 and 2.0 wt.% were examined in this work. A set of maximum enhancements of 8.7%, 9.0% and 24.0% in the impact, inter-laminar shear strength (ILSS) and compressive strengths were achieved by adding 0.5 wt.% SA into the flax/epoxy composites. Also, the results obtained from dynamic mechanical analysis (DMA) indicated that the damping characteristics, peak tan delta and peak loss modulus improved at all filler concentrations, while the glass transition temperature (Tg) decreased slightly. Features of SA such as biodegradability, ability to improve the mechanical properties as observed in this work and enhanced damping characteristics make them suitable for application in machine parts requiring impact resistance and vibration damping characteristics.

scholarly journals Environmentally Friendly Flame-Retardant and Its Application in Rigid Polyurethane Foam

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Yongjun Chen ◽  
Zhixin Jia ◽  
Yuanfang Luo ◽  
Demin Jia ◽  
Bin Li
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Flame Retardant ◽  
Polyurethane Foam ◽  
Thermal Effects ◽  
Oxygen Index ◽  
Rigid Polyurethane Foam ◽  
Limiting Oxygen Index ◽  
Peak Heat Release Rate ◽  
The Impact

A novel Flame-Retardant N-(P,P′-diphenyl) phosphorus-based-(3-triethoxysilicon) propylamine (DPTP) was synthesized in this study. The impact of DPTP on the mechanical properties, thermal stability, and flame retardancy of rigid polyurethane foam (RPUF) was studied. The addition of DPTP to RPUF can significantly reduce the undesirable thermal effects and smoke density during combustion, as well as increasing the limiting oxygen index. Compared with pure RPUF, the peak heat release rate of RPUF containing 10 phr of DPTP decreased by 39.4%, while its peak smoke production rate decreased by 49.9%. However, it was also found that the addition of DPTP reduced the compressive strength of RPUF.

scholarly journals The Preparation, Thermal Properties, and Fire Property of a Phosphorus-Containing Flame-Retardant Styrene Copolymer

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 127 ◽  
Author(s):  
Yu Sun ◽  
Yazhen Wang ◽  
Li Liu ◽  
Tianyuan Xiao
Keyword(s):  
Thermal Properties ◽  
Thermogravimetric Analysis ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Limiting Oxygen Index ◽  
Chemical Structures ◽  
1H Nuclear Magnetic Resonance ◽  
Phosphorus Containing ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

A 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO) acrylate, (6-oxidodibenzo [c,e][1,2] oxaphosphinin-6-yl) methyl acrylate (DOPOAA), has been prepared. Copolymers of styrene (St) and DOPOAA were prepared by emulsion polymerization. The chemical structures of copolymers containing levels of DOPOAA were verified using Fourier transform infrared (FT-IR) spectroscopy and 1H nuclear magnetic resonance (1H-NMR) spectroscopy. The thermal properties and flame-retardant behaviors of DOPO-containing monomers and copolymers were observed using thermogravimetric analysis and micro calorimetry tests. From thermogravimetric analysis (TGA), it was found out that the T5% for decomposition of the copolymer was lower than that of polystyrene (PS), but the residue at 700 °C was higher than that of PS. The results from micro calorimetry (MCC) tests indicated that the rate for the heat release of the copolymer combustion was lower than that for PS. The limiting oxygen index (LOI) for combustion of the copolymer rose with increasing levels of DOPOAA. These data indicate that copolymerization of the phosphorus-containing flame-retardant monomer, DOPOAA, into a PS segment can effectively improve the thermal stability and flame retardancy of the copolymer.

scholarly journals Effect of SWCNT-Tuball Paper on the Lightning Strike Protection of CFRPs and Their Selected Mechanical Properties

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3140
Author(s):  
Kamil Dydek ◽  
Anna Boczkowska ◽  
Rafał Kozera ◽  
Paweł Durałek ◽  
Łukasz Sarniak ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Copper Foil ◽  
Impact Resistance ◽  
Mechanical Analysis ◽  
Lightning Strike ◽  
Single Wall Carbon Nanotubes ◽  
Carbon Fibre Reinforced Polymer ◽  
The Impact

The main aim of this work was the investigation of the possibility of replacing the heavy metallic meshes applied onto the composite structure in airplanes for lightning strike protection with a thin film of Tuball single-wall carbon nanotubes in the form of ultra-light, conductive paper. The Tuball paper studied contained 75 wt% or 90 wt% of carbon nanotubes and was applied on the top of carbon fibre reinforced polymer before fabrication of flat panels. First, the electrical conductivity, impact resistance and thermo-mechanical properties of modified laminates were measured and compared with the reference values. Then, flat panels with selected Tuball paper, expanded copper foil and reference panels were fabricated for lightning strike tests. The effectiveness of lightning strike protection was evaluated by using the ultrasonic phased-array technique. It was found that the introduction of Tuball paper on the laminates surface improved both the surface and the volume electrical conductivity by 8800% and 300%, respectively. The impact resistance was tested in two directions, perpendicular and parallel to the carbon fibres, and the values increased by 9.8% and 44%, respectively. The dynamic thermo-mechanical analysis showed higher stiffness and a slight increase in glass transition temperature of the modified laminates. Ultrasonic investigation after lightning strike tests showed that the effectiveness of Tuball paper is comparable to expanded copper foil.

Sign in / Sign up

Export Citation Format

Share Document