scholarly journals Photocatalytic Cleavage of β-O-4 Ether Bonds in Lignin over Ni/TiO2

Molecules ◽  
2020 ◽  
Vol 25 (9) ◽  
pp. 2109
Author(s):  
Changzhou Chen ◽  
Peng Liu ◽  
Haihong Xia ◽  
Minghao Zhou ◽  
Jiaping Zhao ◽  
...  
Keyword(s):  
Room Temperature ◽  
Uv Light ◽  
Low Cost ◽  
Photochemical Reactions ◽  
Pyridinium Chlorochromate ◽  
High Catalytic Activity ◽  
Tio2 Photocatalyst ◽  
Selective Hydrogenolysis ◽  
Lignin Model ◽  
Catalytic Performances

It is of great importance to explore the selective hydrogenolysis of β-O-4 linkages, which account for 45–60% of all linkages in native lignin, to produce valued-added chemicals and fuels from biomass employing UV light as catalyst. TiO2 exhibited satisfactory catalytic performances in various photochemical reactions, due to its versatile advantages involving high catalytic activity, low cost and non-toxicity. In this work, 20 wt.% Ni/TiO2 and oxidant PCC (Pyridinium chlorochromate) were employed to promote the cleavage of β-O-4 alcohol to obtain high value chemicals under UV irradiation at room temperature. The Ni/TiO2 photocatalyst can be magnetically recovered and efficiently reused in the following four consecutive recycling tests in the cleavage of β-O-4 ether bond in lignin. Mechanism studies suggested that the oxidation of β-O-4 alcohol to β-O-4 ketone by oxidant PCC first occurred during the reaction, and was followed by the photocatalysis of the obtained β-O-4 ketone to corresponding acetophenone and phenol derivates. Furthermore, the system was tested on a variety of lignin model substrates containing β-O-4 linkage for the generation of fragmentation products in good to excellent results.

Towards hydrogen detection at room temperature with printed ZnO nanoceramics films activated with halogen light

2015 ◽  
Vol 2015 (CICMT) ◽  
pp. 000224-000229 ◽  
Author(s):  
Van Son NGUYEN ◽  
Véronique JUBERA ◽  
Alain GARCIA ◽  
Claude LUCAT ◽  
Hélène DEBEDA
Keyword(s):  
Room Temperature ◽  
Uv Light ◽  
Layer Structure ◽  
Low Cost ◽  
Halogen Lamp ◽  
Gas Sensitivity ◽  
Excitation Spectra ◽  
Light Power ◽  
Hydrogen Detection ◽  
Halogen Light

Though semiconducting properties of ZnO have been extensively investigated under hazardous gases, research is still necessary for low-cost sensors working at room temperature. Study of printed ZnO nanopowders based-sensor has been undertaken for hydrogen detection. A ZnO paste made with commercial nanopowders is deposited on interdigitated Pt electrodes and sintered at 400°C. ZnO layer structure and morphology are first examined by XRD, SEM and emission/excitation spectra prior to the study of the effect of UV-light on the electrical conduction of the semiconductor oxide. Then, the response to hydrogen shows that low UV-light provided by a halogen light enhances gas sensitivity and allows detection at room temperature with sensitivity equivalent to those obtained in dark condition at 150°C. A sensitivity S≈44% is obtained for 300 ppm hydrogen at room temperature under halogen lamp illumination whereas a sensitivity S≈38% is measured at 150°C in the dark. Moreover, it is demonstrated that very low UV-light power (15 μW/mm2) provided by the halogen lamp is sufficient to give sensitivities as high as those obtained with UV LED (7.7 mW/mm2). These results are comparable to those obtained for 1 or 2D ZnO nanostructures working at room temperature or at temperature until 250 °C.

Nickel (II) and oxovanadium (IV) complexes supported on MCM-41 mesoporous and their application in catalytic selective sulfide and thiol oxidation

2020 ◽  
Vol 23 ◽  
Author(s):  
Mohsen Nikoorazm ◽  
Maryam Khanmoradi ◽  
Masoumeh Sayadian
Keyword(s):  
Catalytic Activity ◽  
Room Temperature ◽  
Sol Gel ◽  
Reaction Times ◽  
Significant Loss ◽  
Spectral Studies ◽  
High Catalytic Activity ◽  
Catalytic Systems ◽  
Solvent Free Conditions ◽  
Mcm 41

Introduction:: MCM-41 was synthesized using the sol-gel method. Then two new transition metal complexes of Nickel (II) and Vanadium (IV), were synthesized by immobilization of adenine (6-aminopurine) into MCM-41 mesoporous. The compounds have been characterized by XRD, TGA, SEM, AAS and FT-IR spectral studies. Using these catalysts provided an efficient and enantioselective procedure for oxidation of sulfides to sulfoxides and oxidative coupling of thiols to their corresponding disulfides using hydrogen peroxide at room temperature. Materials and Methods:: To a solution of sulfide or thiol (1 mmol) and H2O2 (5 mmol), a determined amount of the catalyst was added. The reaction mixture was stirred at room temperature for the specific time under solvent free conditions. The progress of the reaction was monitored by TLC using n-hexane: acetone (8:2). Afterwards, the catalyst was removed from the reaction mixture by centrifugation and, then, washed with dichloromethane in order to give the pure products. Results:: All the products were obtained in excellent yields and short reaction times indicating the high activity of the synthesized catalysts. Besides, the catalysts can be recovered and reused for several runs without significant loss in their catalytic activity. Conclusion:: These catalytic systems furnish the products very quickly with excellent yields and VO-6AP-MCM-41 shows high catalytic activity compared to Ni-6AP-MCM-41.

Graphene Modified Molecular Imprinting Electrochemical Sensor for Determining the Content of Dopamine

2019 ◽  
Vol 15 (6) ◽  
pp. 628-634
Author(s):  
Rong Liu ◽  
Jie Li ◽  
Tongsheng Zhong ◽  
Liping Long
Keyword(s):  
Electrochemical Sensor ◽  
Molecular Imprinting ◽  
Neurological Disorders ◽  
Room Temperature ◽  
Low Cost ◽  
Differential Pulse ◽  
Current Response ◽  
Specific Selectivity ◽  
Pulse Voltammetry

Background: The unnatural levels of dopamine (DA) result in serious neurological disorders such as Parkinson’s disease. Electrochemical methods which have the obvious advantages of simple operation and low-cost instrumentation were widely used for determination of DA. In order to improve the measurement performance of the electrochemical sensor, molecular imprinting technique and graphene have always been employed to increase the selectivity and sensitivity. Methods: An electrochemical sensor which has specific selectivity to (DA) was proposed based on the combination of a molecular imprinting polymer (MIP) with a graphene (GR) modified gold electrode. The performance and effect of MIP film were investigated by differential pulse voltammetry (DPV) and cyclic voltammetry (CV) in the solution of 5.0 ×10-3 mol/L K3[Fe(CN)6] and K4[Fe(CN)6] with 0.2 mol/L KCl at room temperature. Results: This fabricated sensor has well repeatability and stability, and was used to determine the dopamine of urine. Under the optimized experiment conditions, the current response of the imprinted sensor was linear to the concentration of dopamine in the range of 1.0×10-7 ~ 1.0×10-5 mol/L, the linear equation was I (µA) = 7.9824+2.7210lgc (mol/L) with the detection limit of 3.3×10-8 mol/L. Conclusion: In this work, a highly efficient sensor for determination of DA was prepared with good sensitivity by GR and great selectivity of high special recognization ability by molecular imprinting membrane. This proposed sensor was used to determine the dopamine in human urine successfully.

Single–atom manganese and nitrogen co-doped graphene as low-cost catalysts for the efficient CO oxidation at room temperature

2021 ◽  
Vol 536 ◽  
pp. 147809
Author(s):  
Mingming Luo ◽  
Zhao Liang ◽  
Chao Liu ◽  
Xiaopeng Qi ◽  
Mingwei Chen ◽  
...  
Keyword(s):  
Co Oxidation ◽  
Room Temperature ◽  
Low Cost ◽  
Single Atom ◽  
Doped Graphene ◽  
Co Doped

scholarly journals Room-Temperature Solution-Processed 0D/1D Bilayer Electrodes for Translucent CsPbBr3 Perovskite Photovoltaics

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1489
Author(s):  
Bhaskar Parida ◽  
Saemon Yoon ◽  
Dong-Won Kang
Keyword(s):  
Solar Cells ◽  
Indium Tin Oxide ◽  
High Performance ◽  
Room Temperature ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Ambient Air ◽  
Plasma Damage ◽  
Temperature Solution ◽  
Ito Nanoparticles

Materials and processing of transparent electrodes (TEs) are key factors to creating high-performance translucent perovskite solar cells. To date, sputtered indium tin oxide (ITO) has been a general option for a rear TE of translucent solar cells. However, it requires a rather high cost due to vacuum process and also typically causes plasma damage to the underlying layer. Therefore, we introduced TE based on ITO nanoparticles (ITO-NPs) by solution processing in ambient air without any heat treatment. As it reveals insufficient conductivity, Ag nanowires (Ag-NWs) are additionally coated. The ITO-NPs/Ag-NW (0D/1D) bilayer TE exhibits a better figure of merit than sputtered ITO. After constructing CsPbBr3 perovskite solar cells, the device with 0D/1D TE offers similar average visible transmission with the cells with sputtered ITO. More interestingly, the power conversion efficiency of 0D/1D TE device was 5.64%, which outperforms the cell (4.14%) made with sputtered-ITO. These impressive findings could open up a new pathway for the development of low-cost, translucent solar cells with quick processing under ambient air at room temperature.

Eco-friendly preparation of ultrathin biomass-derived Ni3S2-doped carbon nanosheets for selective hydrogenolysis of lignin model compounds in the absence of hydrogen

2021 ◽  
Vol 23 (8) ◽  
pp. 3090-3103
Author(s):  
Changzhou Chen ◽  
Dichao Wu ◽  
Peng Liu ◽  
Jing Li ◽  
Haihong Xia ◽  
...  
Keyword(s):  
Model Compounds ◽  
Lignin Model Compounds ◽  
Carbon Nanosheets ◽  
Significant Potential ◽  
Selective Hydrogenolysis ◽  
Lignin Model

Lignin is an abundant source of aromatics, and the depolymerization of lignin provides significant potential for producing high-value chemicals.

scholarly journals Enhanced Oil Removal by a Non-Toxic Biosurfactant Formulation

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 467
Author(s):  
Emília Mendes da Silva Santos ◽  
Isabela Regina Alvares da Silva Lira ◽  
Hugo Moraes Meira ◽  
Jaciana dos Santos Aguiar ◽  
Raquel Diniz Rufino ◽  
...  
Keyword(s):  
Room Temperature ◽  
Low Cost ◽  
Aeration Rate ◽  
Oil Removal ◽  
Central Composite Rotatable Design ◽  
Chemical Methods ◽  
Ph Values ◽  
Spectroscopic Analyses ◽  
New Formulation ◽  
Central Composite

In this study, a new formulation of low-cost, biodegradable, and non-toxic biosurfactant by Candida sphaerica UCP 0995 was investigated. The study was conducted in a bioreactor on an industrial waste-based medium, and a central composite rotatable design was used for optimization. The best results, namely a 25.22 mN/m reduction in surface tension, a biosurfactant yield of 10.0 g/L, and a critical micelle concentration of 0.2 g/L, were achieved in 132 h at an agitation speed of 175 rpm and an aeration rate of 1.5 vvm. Compositional and spectroscopic analyses of the purified biosurfactant by chemical methods, Fourier transform infrared spectroscopy, and nuclear magnetic resonance suggested that it is a glycolipid-type biosurfactant, and it showed no cytotoxicity in the MTT assay. The biosurfactant, submitted to different formulation methods as a commercial additive, remained stable for 120 days at room temperature. Tensioactive properties and stability were evaluated at different pH values, temperatures, and salt concentrations. The biosurfactant obtained with all formulation methods demonstrated good stability, with tolerance to wide ranges of pH, temperature and salinity, enabling application under extreme environmental conditions. Bioremediation tests were performed to check the efficacy of the isolated biosurfactant and the selected microbial species in removing oil from soil. The results demonstrated that the biosurfactant produced has promising properties as an agent for the bioremediation of contaminated soil.

scholarly journals Zirconium-Doped Chromium IV Oxide Nanocomposites: Synthesis, Characterization, and Photocatalysis towards the Degradation of Organic Dyes

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 117
Author(s):  
Zahir Muhammad ◽  
Farman Ali ◽  
Muhammad Sajjad ◽  
Nisar Ali ◽  
Muhammad Bilal ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Solid State ◽  
Room Temperature ◽  
Organic Dyes ◽  
Uv Light ◽  
Heterogeneous Photocatalysis ◽  
Ft Ir ◽  
Complete Mineralization

Degradation of organic dyes and their byproducts by heterogeneous photocatalysts is an essential process, as these dyes can be potentially discharged in wastewater and threaten aquatic and xerophyte life. Therefore, their complete mineralization into nontoxic components (water and salt) is necessary through the process of heterogeneous photocatalysis. In this study, Zr/CrO2 (Zirconium-doped chromium IV oxide) nanocomposite-based photocatalysts with different compositions (1, 3, 5, 7 & 9 wt.%) were prepared by an environmentally friendly, solid-state reaction at room temperature. The as-prepared samples were calcined under air at 450 °C in a furnace for a specific period of time. The synthesis of Zr/CrO2 photocatalysts was confirmed by various techniques, including XRD, SEM, EDX, FT-IR, UV-Vis, and BET. The photocatalytic properties of all samples were tested towards the degradation of methylene blue and methyl orange organic dyes under UV light. The results revealed a concentration-dependent photocatalytic activity of photocatalysts, which increased the amount of dopant (up to 5 wt.%). However, the degradation efficiency of the catalysts decreased upon further increasing the amount of dopant due to the recombination of holes and photoexcited electrons.

scholarly journals Longevity of Raw and Lyophilized Crude Urease Extracts

2021 ◽  
Vol 2 (2) ◽  
pp. 325-334
Author(s):  
Neda Javadi ◽  
Hamed Khodadadi Tirkolaei ◽  
Nasser Hamdan ◽  
Edward Kavazanjian
Keyword(s):  
Crude Extract ◽  
Room Temperature ◽  
Low Cost ◽  
Extraction Process ◽  
Crude Extracts ◽  
Simple Extraction ◽  
Commercial Applications ◽  
Stable Source ◽  
The Stability ◽  
The Cost

The stability (longevity of activity) of three crude urease extracts was evaluated in a laboratory study as part of an effort to reduce the cost of urease for applications that do not require high purity enzyme. A low-cost, stable source of urease will greatly facilitate engineering applications of urease such as biocementation of soil. Inexpensive crude extracts of urease have been shown to be effective at hydrolyzing urea for carbonate precipitation. However, some studies have suggested that the activity of a crude extract may decrease with time, limiting the potential for its mass production for commercial applications. The stability of crude urease extracts shown to be effective for biocementation was studied. The crude extracts were obtained from jack beans via a simple extraction process, stored at room temperature and at 4 ℃, and periodically tested to evaluate their stability. To facilitate storage and transportation of the extracted enzyme, the longevity of the enzyme following freeze drying (lyophilization) to reduce the crude extract to a powder and subsequent re-hydration into an aqueous solution was evaluated. In an attempt to improve the shelf life of the lyophilized extract, dextran and sucrose were added during lyophilization. The stability of purified commercial urease following rehydration was also investigated. Results of the laboratory tests showed that the lyophilized crude extract maintained its activity during storage more effectively than either the crude extract solution or the rehydrated commercial urease. While incorporating 2% dextran (w/v) prior to lyophilization of the crude extract increased the overall enzymatic activity, it did not enhance the stability of the urease during storage.

scholarly journals Cat-CrNP as new material with catalytic properties for 2-chloro-2-propen-1-ol and ethylene oligomerizations

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jacek Malinowski ◽  
Dagmara Jacewicz ◽  
Artur Sikorski ◽  
Mariusz Urbaniak ◽  
Przemysław Rybiński ◽  
...  
Keyword(s):  
Complex Compound ◽  
Atmospheric Pressure ◽  
Room Temperature ◽  
Organometallic Compounds ◽  
Ethylene Oligomerization ◽  
High Catalytic Activity ◽  
New Material ◽  
Activity Requirement ◽  
Olefin Oligomerization ◽  
Xrd Method

AbstractThe contemporary search for new catalysts for olefin oligomerization and polymerization is based on the study of coordinating compounds and/or organometallic compounds as post-metallocene catalysts. However known catalysts are suffered by many flaws, among others unsatisfactory activity, requirement of high pressure or instability at high temperatures. In this paper, we present a new catalyst i.e. the crystalline complex compound possesing high catalytic activity in the oligomerization of olefins, such as 2-chloro-2-propen-1-ol and ethylene under very mild conditions (room temperature, 0.12 bar for ethylene oligomerization, atmospheric pressure for 2-chloro-2-propen-1-ol oligomerization). New material—Cat-CrNP ([nitrilotriacetato-1,10-phenanthroline]chromium(III) tetrahydrate) has been obtained as crystalline form of the nitrilotriacetate complex compound of chromium(III) with 1,10-phenanthroline and characterized in terms of its crystal structure by the XRD method and by multi-analytical investigations towards its physicochemical propeties The yield of catalytic oligomerization over Cat-CrNP reached to 213.92 g · mmol−1 · h−1· bar−1 and 3232 g · mmol−1 · h−1 · bar−1 for the 2-chloro-2-propen-1-ol and ethylene, respectively. Furthemore, the synthesis of Cat-CrNP is cheap, easy to perform and solvents used during preparation are environmentally friendly.

Sign in / Sign up

Export Citation Format

Share Document