scholarly journals Hydrothermal Synthesis of Hematite Nanoparticles Decorated on Carbon Mesospheres and Their Synergetic Action on the Thermal Decomposition of Nitrocellulose

Nanomaterials ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 968 ◽  
Author(s):  
Abdenacer Benhammada ◽  
Djalal Trache ◽  
Mohamed Kesraoui ◽  
Salim Chelouche
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Analytical Techniques ◽  
Decomposition Reaction ◽  
Decomposition Temperature ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Nano Catalyst ◽  
Average Size ◽  
A Minor

In this study, carbon mesospheres (CMS) and iron oxide nanoparticles decorated on carbon mesospheres (Fe2O3-CMS) were effectively synthesized by a direct and simple hydrothermal approach. α-Fe2O3 nanoparticles have been successfully dispersed in situ on a CMS surface. The nanoparticles obtained have been characterized by employing different analytical techniques encompassing Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The produced carbon mesospheres, mostly spherical in shape, exhibited an average size of 334.5 nm, whereas that of Fe2O3 supported on CMS is at around 80 nm. The catalytic effect of the nanocatalyst on the thermal behavior of cellulose nitrate (NC) was investigated by utilizing differential scanning calorimetry (DSC). The determination of kinetic parameters has been carried out using four isoconversional kinetic methods based on DSC data obtained at various heating rates. It is demonstrated that Fe2O3-CMS have a minor influence on the decomposition temperature of NC, while a noticeable diminution of the activation energy is acquired. In contrast, pure CMS have a slight stabilizing effect with an increase of apparent activation energy. Furthermore, the decomposition reaction mechanism of NC is affected by the introduction of the nano-catalyst. Lastly, we can infer that Fe2O3-CMS may be securely employed as an effective catalyst for the thermal decomposition of NC.

scholarly journals Non-Isothermal Sublimation Kinetics of 2,4,6-Trinitrotoluene (TNT) Nanofilms

Molecules ◽  
2019 ◽  
Vol 24 (6) ◽  
pp. 1163 ◽  
Author(s):  
Walid Hikal ◽  
Brandon Weeks
Keyword(s):  
Activation Energy ◽  
Analytical Techniques ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Absorbance Spectroscopy ◽  
Calculated Activation Energy ◽  
Sublimation Kinetics ◽  
Sublimation Rates ◽  
First Time ◽  
Kinetics Of

Non-isothermal sublimation kinetics of low-volatile materials is more favorable over isothermal data when time is a crucial factor to be considered, especially in the subject of detecting explosives. In this article, we report on the in-situ measurements of the sublimation activation energy for 2,4,6-trinitrotoluene (TNT) continuous nanofilms in air using rising-temperature UV-Vis absorbance spectroscopy at different heating rates. The TNT films were prepared by the spin coating deposition technique. For the first time, the most widely used procedure to determine sublimation rates using thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC) was followed in this work using UV-Vis absorbance spectroscopy. The sublimation kinetics were analyzed using three well-established calculating techniques. The non-isothermal based activation energy values using the Ozawa, Flynn–Wall, and Kissinger models were 105.9 ± 1.4 kJ mol−1, 102.1 ± 2.7 kJ mol−1, and 105.8 ± 1.6 kJ mol−1, respectively. The calculated activation energy agreed well with our previously reported isothermally-measured value for TNT nanofilms using UV-Vis absorbance spectroscopy. The results show that the well-established non-isothermal analytical techniques can be successfully applied at a nanoscale to determine sublimation kinetics using absorbance spectroscopy.

Thermal Decomposition Kinetics of Flame Retardant Polybutylene Terephthalate Matrix Composites

2019 ◽  
Vol 956 ◽  
pp. 181-191
Author(s):  
Jian Lin Xu ◽  
Bing Xue Ma ◽  
Cheng Hu Kang ◽  
Cheng Cheng Xu ◽  
Zhou Chen ◽  
...  
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Flame Retardant ◽  
Mass Loss Rate ◽  
Decomposition Reaction ◽  
Decomposition Kinetics ◽  
Thermal Decomposition Kinetics ◽  
Heating Rates ◽  
Polybutylene Terephthalate ◽  
Kinetics Of

The thermal decomposition kinetics of polybutylene terephthalate (PBT) and flame-retardant PBT (FR-PBT) were investigated by thermogravimetric analysis at various heating rates. The kinetic parameters were determined by using Kissinger, Flynn-Wall-Ozawa and Friedman methods. The y (α) and z (α) master plots were used to identify the thermal decomposition model. The results show that the rate of residual carbon of FR-PBT is higher than that of PBT and the maximum mass loss rate of FR-PBT is lower than that of PBT. The values of activation energy of PBT (208.71 kJ/mol) and FR-PBT (244.78 kJ/mol) calculated by Kissinger method were higher than those of PBT (PBT: 195.54 kJ/mol) and FR-PBT (FR-PBT: 196.00 kJ/mol) calculated by Flynn-Wall-Ozawa method and those of PBT and FR-PBT (PBT: 199.10 kJ/mol, FR-PBT: 206.03 kJ/mol) calculated by Friedman methods. There is a common thing that the values of activation energy of FR-PBT are higher than that of PBT in different methods. The thermal decomposition reaction models of the PBT and FR-PBT can be described by Avarami-Erofeyev model (A1).

scholarly journals Analysis of Thermal Decomposition of Solid Rocket Propellants

2019 ◽  
Vol 10 (2) ◽  
pp. 43-54 ◽  
Author(s):  
Marcin CEGŁA ◽  
Janusz ZMYWACZYK ◽  
Piotr KONIORCZYK
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Energetic Materials ◽  
Decomposition Analysis ◽  
Simultaneous Thermal Analysis ◽  
Analytical Techniques ◽  
Heating Rates ◽  
Rocket Propellants ◽  
Solid Rocket ◽  
Solid Rocket Propellants

The paper presents results of thermal decomposition analysis of selected solid rocket propellants. Homogeneous propellant PAC and heterogeneous propellant H2 were subjected to simultaneous thermal analysis with the use of NETZSCH STA 2500 Regulus device with five heating rates of 2.5, 5, 7.5, 10 and 15 K/min. The method combines TG, DTG and DTA analytical techniques in a single measurement. The aim of the conducted experiments was to study thermal decomposition of these energetic materials as well as to determine activation energy of the decomposition process and the preconditioning factor from the TG curves. The tested materials properties and chemical composition along with a brief description of the experimental procedure are described. The inverse procedure of calculating the activation energy, based on the Ozawa-Flynn-Wall model is described. Finally, the results of thermal decomposition of two tested solid rocket propellants are presented along with maximum decomposition rates and percentage of mass loss.

scholarly journals Thermal Decomposition Kinetics and Compatibility of 3,5-difluoro-2,4,6-trinitroanisole (DFTNAN)

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4186
Author(s):  
Fei Hu ◽  
Lin-Jian Wang ◽  
Wei Zhao ◽  
Yu-Cun Liu ◽  
Su-Ming Jing ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Decomposition Temperature ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
High Explosives ◽  
Kinetic And Thermodynamic Parameters ◽  
Study Results ◽  
Mass Ratios ◽  
Decomposition Behavior ◽  
Stanag 4147

In this paper, the thermal decomposition behavior of 3,5-difluoro-2,4,6-trinitroanisole (DFTNAN) was studied by differential scanning calorimetry (DSC) and thermogravimetry (TG) by using different heating rates (2, 5, 10, 15 °C·min−1). Subsequently, the kinetic and thermodynamic parameters of non-isothermal thermal decomposition of DFTNAN were calculated. The critical temperature of thermal explosion (Tb) and self-accelerating decomposition temperature (TASDT) were determined to be 249.03 °C and 226.33 °C, respectively. The compatibility of DFTNAN with a number of high explosives (cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX), 1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaaza-tetracyclo-[5.5.0.05,9.03,11]-dodecane (CL-20) and dihydroxylammonium 5,5’-bistetrazole-1,1’-diolate (TKX-50)) was studied at different mass ratios using DSC. The criteria to judge the compatibility between the materials were based on a standardization agreement (STANAG 4147). The thermodynamic study results revealed that DFTNAN possessed superior thermal safety and stability. The experimental of compatibility results indicated that the mass ratios of the high explosives in the DFTNAN/RDX, DFTNAN/HMX and DFTNAN/CL-20 compositions more than 40%, 60% and 70% exhibited good compatibility, whereas DFTNAN/TKX-50 demonstrated poor compatibility.

Global Kinetics of the Thermal Decomposition of Materials

1997 ◽  
Author(s):  
Azzedine Missoum ◽  
Ashwani K. Gupta ◽  
Jianrong Chen
Keyword(s):  
Heat Transfer ◽  
Activation Energy ◽  
Heating Rate ◽  
Decomposition Reaction ◽  
Decomposition Process ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Transfer Product ◽  
Product Evolution ◽  
Kinetics Of

Abstract Results on the thermal destruction behavior during the decomposition of cellulose under controlled conditions are presented. Thermogravimetric (TGA) and Differential Scanning Calorimetry (DSC) tests have been carried out on the celluose samples under conditions of various heating rate and surrounding gas environment. Pyrolysis times were also measured for different size particles having different moisture contents in a controlled mixing history reactor (CMHR). The global decomposition kinetics were investigated and it was found that the decomposition process is shifts to higher temperatures at higher heating rates as a result of the competing effects of heat and mass transfer, product diffusion and the reactions kinetics. The Arrhenius parameters for pyrolysis were determined using a first order decomposition reaction of the type, dm = −km dt. It was found that the activation energy, heat of pyrolysis and char yield are a strong function of the heating rate. An increase in heating rate from 5 to 60°C/min resulted in a change of activation energy from 204.19 to 138.31 kJ/mole °C. This heating rate dependence of the kinetics is discussed. The overall decomposition process of the examined materials is generally endothermic. In general, heat transfer, mass diffusion, product evolution, heating rate, temperature and environment are the parameters that control the decomposition process. It was also shown that heat transfer and mass transport have the most effects on the decomposition process.

Thermo-catalytic decomposition of polystyrene waste: Comparative analysis using different kinetic models

2019 ◽  
Vol 38 (2) ◽  
pp. 202-212 ◽  
Author(s):  
Ghulam Ali ◽  
Jan Nisar ◽  
Munawar Iqbal ◽  
Afzal Shah ◽  
Mazhar Abbas ◽  
...  
Keyword(s):  
Activation Energy ◽  
Copper Oxide ◽  
Solid Waste ◽  
Thermodynamic Parameters ◽  
Model Fitting ◽  
Catalytic Decomposition ◽  
Decomposition Reaction ◽  
Inert Atmosphere ◽  
Heating Rates ◽  
Model Free

Due to a huge increase in polymer production, a tremendous increase in municipal solid waste is observed. Every year the existing landfills for disposal of waste polymers decrease and the effective recycling techniques for waste polymers are getting more and more important. In this work pyrolysis of waste polystyrene was performed in the presence of a laboratory synthesized copper oxide. The samples were pyrolyzed at different heating rates that is, 5°Cmin−1, 10°Cmin−1, 15°Cmin−1 and 20°Cmin−1 in a thermogravimetric analyzer in inert atmosphere using nitrogen. Thermogravimetric data were interpreted using various model fitting (Coats–Redfern) and model free methods (Ozawa–Flynn–Wall, Kissinger–Akahira–Sunose and Friedman). Thermodynamic parameters for the reaction were also determined. The activation energy calculated applying Coats–Redfern, Ozawa–Flynn–Wall, Kissinger–Akahira–Sunose and Friedman models were found in the ranges 105–148.48 kJmol−1, 99.41–140.52 kJmol−1, 103.67–149.15 kJmol−1 and 99.93–141.25 kJmol−1, respectively. The lowest activation energy for polystyrene degradation in the presence of copper oxide indicates the suitability of catalyst for the decomposition reaction to take place at lower temperature. Moreover, the obtained kinetics and thermodynamic parameters would be very helpful in determining the reaction mechanism of the solid waste in a real system.

scholarly journals Green Preparation, Spheroidal, and Superior Property of Nano-1,3,5,7-Tetranittro-1,3,5,7-Tetrazocane

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Xinlei Jia ◽  
Jingyu Wang ◽  
Conghua Hou ◽  
Yingxin Tan
Keyword(s):  
Activation Energy ◽  
Particle Size ◽  
Fractal Dimension ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Fractal Theory ◽  
Crystal Form ◽  
Decomposition Temperature ◽  
Scanning Calorimetry ◽  
The Impact

Herein, a green process for preparing nano-HMX, mechanical demulsification shearing (MDS) technology, was developed. Nano-HMX was successfully fabricated via MDS technology without using any chemical reagents, and the fabrication mechanism was proposed. Based on the “fractal theory,” the optimal shearing time for mechanical emulsification was deduced by calculating the fractal dimension of the particle size distribution. The as-prepared nano-HMX was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). And the impact sensitivities of HMX particles were contrastively investigated. The raw HMX had a lower fractal dimension of 1.9273. The ideal shearing time was 7 h. The resultant nano-HMX possessed a particle size distribution ranging from 203.3 nm to 509.1 nm as compared to raw HMX. Nano-HMX particles were dense spherical, maintaining β-HMX crystal form. In addition, they had much lower impact sensitivity. However, the apparent activation energy as well as thermal decomposition temperature of nano-HMX particles was decreased, attributing to the reduced probability for hotspot generation. Especially when the shearing time was 7 h, the activation energy was markedly decreased.

scholarly journals Thermodynamics and Kinetic Modeling of the ZnSO4.H2O Thermal Decomposition in the Presence of a Pd/Al2O3 Catalyst

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 548
Author(s):  
Gabriela V. T. Kurban ◽  
Artur S. C. Rego ◽  
Nathalli M. Mello ◽  
Eduardo A. Brocchi ◽  
Rogério C. S. Navarro ◽  
...  
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Zinc Sulfate ◽  
Thermodynamic Assessment ◽  
Reaction System ◽  
Decomposition Temperature ◽  
Kinetic Behavior ◽  
Proposed Model ◽  
Al2o3 Catalyst ◽  
Iodine Reaction

The sulfur–iodine thermochemical water-splitting cycle is a promising route proposed for hydrogen production. The decomposition temperature remains a challenge in the process. Catalysts, such as Pd supported on Al2O3, are being considered to decrease reaction temperatures. However, little is known regarding the kinetic behavior of such systems. In this work, zinc sulfate thermal decomposition was studied through non-isothermal thermogravimetric analysis to understand the effect of a catalyst within the sulfur–iodine reaction system context. The findings of this analysis were also related to a thermodynamic assessment. It was observed that the presence of Pd/Al2O3 modified the reaction mechanism, possibly with some intermediate reactions that were suppressed or remarkably accelerated. The proposed model suggests that zinc sulfate transformation occurred in two sequential stages without the Pd-based material. Activation energy values of 238 and 368 kJ.mol−1 were calculated. In the presence of Pd/Al2O3, an activation energy value of 204 kJ.mol−1 was calculated, which is lower than observed previously.

scholarly journals Formation of metal oxide-based hydroxysodalite by alkali-activation of kaolinite

Chemija ◽  
2020 ◽  
Vol 31 (3) ◽  
Author(s):  
Ehab AlShamaileh ◽  
Muayad Esaifan ◽  
Qusay Abu-Afifeh
Keyword(s):  
Activation Energy ◽  
Metal Oxide ◽  
Alkali Activation ◽  
Dsc Analysis ◽  
X Ray Diffraction ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Xrd Study ◽  
Dsc Curves

The formation of metal oxide-based hydroxysodalite by alkali-activation of kaolinite is studied using X-ray diffraction (XRD) study and differential scanning calorimetry (DSC) analysis. Different metal oxides (CoO, MgO, FeO and SiO2) were used to form the metal oxide-based hydroxysodalite. The transformation from kaolinite into hydroxysodalite is confirmed by XRD. In the thermodynamic study, the maximum peak temperatures for DSC curves at various heating rates were used to determine the activation energy (Ea) of the hydroxysodalite formation. With magnesium oxide and cobalt oxide, the formation process was found to be exothermic while it was endothermic with iron oxide.

scholarly journals Improvement in Carbonization Efficiency of Cellulosic Fibres Using Silylated Acetylene and Alkoxysilanes

Fibers ◽  
2019 ◽  
Vol 7 (10) ◽  
pp. 84
Author(s):  
Maria Mironova ◽  
Igor Makarov ◽  
Lyudmila Golova ◽  
Markel Vinogradov ◽  
Georgy Shandryuk ◽  
...  
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Thermal Behavior ◽  
Comparative Studies ◽  
Decomposition Reaction ◽  
Activation Energies ◽  
Composite Fibers ◽  
Carbon Yield ◽  
Pyrolysis Reaction ◽  
Cellulosic Fibres

Comparative studies of the structure and thermal behavior of cellulose and composite precursors with additives of silyl-substituted acetylene and alkoxysilanes were carried out. It is shown that the introduction of silicon-containing additives into the cellulose matrix influenced the thermal behavior of the composite fibers and the carbon yield after carbonization. Comparison of the activation energies of the thermal decomposition reaction renders it possible to determine the type of additive and its concentration, which reduces the energy necessary for pyrolysis. It is shown that the C/O ratio in the additive and the presence of the Si–C bond affected the activation energy and the temperature of the beginning and the end of the pyrolysis reaction.

Sign in / Sign up

Export Citation Format

Share Document