scholarly journals High Efficiency Focusing and Vortex Generator Based on Polarization-Insensitive Gallium Nitride Metasurface

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2638
Author(s):  
Zhitong Sun ◽  
Bijun Xu ◽  
Bairui Wu ◽  
Xiaogang Wang ◽  
Hao Ying
Keyword(s):  
Gallium Nitride ◽  
Optical Communication ◽  
High Efficiency ◽  
Structural Parameters ◽  
Vortex Generator ◽  
Maximum Efficiency ◽  
Dynamic Phase ◽  
Linearly Polarized ◽  
Polarization Insensitive ◽  
Focused Beam

In this paper, two polarization-insensitive Gallium Nitride (GaN) metasurfaces based on a dynamic phase for adjusting the wavefront are proposed. Specifically, we obtained the target phase to satisfy some design conditions by changing the structural parameters at the nanoscales. Under the irradiation of linearly polarized (LP) light and circularly polarized (CP) light, respectively, one of the metasurfaces can generate a focused beam with an efficiency of 84.7%, and the other can generate a vortex beam with a maximum efficiency of 76.6%. Our designed metasurfaces will have important applications in optical communication, holographic projection, and particle capture.

scholarly journals High Efficient Metadevices for Terahertz Beam Shaping

2021 ◽  
Vol 9 ◽  
Author(s):  
Xinan Li ◽  
Zhixiong Shen ◽  
Qinggui Tan ◽  
Wei Hu
Keyword(s):  
High Performance ◽  
High Efficiency ◽  
Berry Phase ◽  
Vortex Generator ◽  
Maximum Efficiency ◽  
Optical Elements ◽  
Target Frequency ◽  
High Efficient ◽  
Pillar Arrays ◽  
Silicon Pillars

Metasurfaces supply a planar approach for flexible wavefront manipulation, thus facilitating the integration and minimization of optical elements, especially in the terahertz (THz) range. High efficient THz metadevices are highly pursued at present. Here, we propose a bilayer design to improve the efficiency of metadevice. Two silicon pillar arrays with distinguishing geometries are integrated on single silicon substrate. On one side, elliptical silicon pillars, with geometry optimized for the target frequency, are spatially orientated to realize the desired Pancharatnam-Berry phase. On the other side, uniform circular silicon pillars are set to suppress the reflection. With this design, versatile metadevices such as lens, lens array, polarization fork grating, Bessel vortex generator, and Airy beam generator are demonstrated. Maximum efficiency up to 95% for the target frequency and excellent design flexibility are verified. It provides a practical strategy for the generation of compact and high-efficiency THz metadevices, which suit for high-performance THz imaging and communication apparatuses.

scholarly journals Polarization-Insensitive Metasurface for Harvesting Electromagnetic Energy with High Efficiency and Frequency Stability over Wide Range of Incidence Angles

2020 ◽  
Vol 10 (22) ◽  
pp. 8047
Author(s):  
Fan Yu ◽  
Guo-Qiang He ◽  
Xue-Xia Yang ◽  
Jinxin Du ◽  
Steven Gao
Keyword(s):  
High Efficiency ◽  
Incidence Angle ◽  
Incident Angle ◽  
Frequency Stability ◽  
Maximum Efficiency ◽  
Proper Position ◽  
Wide Range ◽  
Polarization Insensitive ◽  
Harvesting Efficiency ◽  
Operation Frequency

In this paper, a polarization-insensitive metasurface, harvesting electromagnetic (EM) energy with high efficiency and frequency stability over a wide range of incidence angles, is proposed. The previously reported metasurfaces suffer from their maximum efficiencies shifting with the frequency when the incidence angle increases. By introducing a square-shaped metal via ring around the elements, the mutual coupling among adjacent cells is reduced so that the proposed metasurface can maintain maximum efficiency at the fixed operation frequency over a wide range of incidence angles. Furthermore, with one single harvesting via in the proper position for the connection of a harvesting load, the metasurface can collect EM energy effectively with both transverse electric (TE) and transverse magnetic (TM) polarizations in one single harvesting load. Compared with the reported metasurfaces, this proposed metasurface has a higher efficiency and fixed operation frequency within a wide incidence range. The energy distribution, harvesting efficiency, and surface current are simulated to investigate the operation mechanism of the proposed metasurface. The simulation results show that the maximum harvesting efficiency is 91% at 5.8 GHz for both TE and TM polarizations at the normal incidence. When the incident angle increases to 75°, the maximum efficiency is achieved at 5.79 GHz (0.19% shift), and the maximum efficiencies of TM and TE polarizations are 91% and 68%, respectively. A 5 × 5 array is fabricated and tested. The experimental results are in good agreement with the simulated ones.

scholarly journals Design of Multifunctional Janus Metasurface Based on Subwavelength Grating

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1034
Author(s):  
Ruonan Ji ◽  
Chuan Jin ◽  
Kun Song ◽  
Shao-Wei Wang ◽  
Xiaopeng Zhao
Keyword(s):  
High Efficiency ◽  
Structural Parameters ◽  
Extinction Ratio ◽  
Bottom Layer ◽  
Subwavelength Grating ◽  
Operational Mechanism ◽  
Metal Insulator Metal ◽  
Linearly Polarized ◽  
Selection Property ◽  
Focusing Lens

In this paper, a Janus metasurface is designed by breaking the structural symmetry based on the polarization selection property of subwavelength grating. The structure comprises three layers: a top layer having a metallic nanostructure, a dielectric spacer, and a bottom layer having subwavelength grating. For a forward incidence, the metal-insulator-metal (MIM) structure operates as a gap plasmonic cavity if the linearly polarized (LP) component is parallel to the grating wires. It also acts as a high-efficiency dual-layer grating polarizer for the orthogonal LP component. For the backward incidence, the high reflectance of the grating blocks the function of the gap plasmonic cavity, leading to its pure functioning as a polarizer. A bifunctional Janus metasurface for 45 degrees beam deflector and polarizer, with a transmission of 0.87 and extinction ratio of 3840, is designed at 1.55 μm and is investigated to prove the validity of the proposed strategy. Moreover, the proposed metasurface can be cascaded to achieve more flexible functions since these functions are independent in terms of operational mechanism and structural parameters. A trifunctional Janus metasurface that acts as a focusing lens, as a reflector, and as a polarizer is designed based on this strategy. The proposed metasurface and the design strategy provide convenience and flexibility in the design of multifunctional, miniaturized, and integrated optical components for polarization-related analysis and for detection systems.

scholarly journals ZVS Auxiliary Circuit for a 10 kW Unregulated LLC Full-Bridge Operating at Resonant Frequency for Aircraft Application

Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1850 ◽  
Author(s):  
Yann E. Bouvier ◽  
Diego Serrano ◽  
Uroš Borović ◽  
Gonzalo Moreno ◽  
Miroslav Vasić ◽  
...  
Keyword(s):  
Resonant Frequency ◽  
Power Density ◽  
High Efficiency ◽  
Harmonic Approximation ◽  
Maximum Efficiency ◽  
Voltage Gain ◽  
Load Range ◽  
Transition Analysis ◽  
Aircraft Application ◽  
Auxiliary Circuit

In modern aircraft designs, following the More Electrical Aircraft (MEA) philosophy, there is a growing need for new high-power converters. In this context, innovative solutions to provide high efficiency and power density are required. This paper proposes an unregulated LLC full-bridge operating at resonant frequency to obtain a constant gain at all loads. The first harmonic approximation (FHA) model is not accurate enough to estimate the voltage gain in converters with high parasitic resistance. A modified FHA model is proposed for voltage gain analysis, and time-based models are used to calculate the instantaneous current required for the ZVS transition analysis. A method using charge instead of current is proposed and used for this ZVS analysis. Using this method, an auxiliary circuit is proposed to achieve complete ZVS within the whole load range, avoiding a gapped transformer design and increasing the efficiency and power density. A 28 Vdc output voltage prototype, with 10 kW peak output power, has been developed to validate the theoretical analysis and the proposed auxiliary circuit. The maximum efficiency (96.3%) is achieved at the nominal power of 5 kW.

scholarly journals Design of Grating Al2O3 Passivation Structure Optimized for High-Efficiency Cu(In,Ga)Se2 Solar Cells

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4849
Author(s):  
Chan Hyeon Park ◽  
Jun Yong Kim ◽  
Shi-Joon Sung ◽  
Dae-Hwan Kim ◽  
Yun Seon Do
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Surface Passivation ◽  
Rear Surface ◽  
Maximum Efficiency ◽  
Structural Factors ◽  
Carrier Recombination ◽  
Cigs Solar Cells ◽  
Effective Carrier ◽  
Opening Width

In this paper, we propose an optimized structure of thin Cu(In,Ga)Se2 (CIGS) solar cells with a grating aluminum oxide (Al2O3) passivation layer (GAPL) providing nano-sized contact openings in order to improve power conversion efficiency using optoelectrical simulations. Al2O3 is used as a rear surface passivation material to reduce carrier recombination and improve reflectivity at a rear surface for high efficiency in thin CIGS solar cells. To realize high efficiency for thin CIGS solar cells, the optimized structure was designed by manipulating two structural factors: the contact opening width (COW) and the pitch of the GAPL. Compared with an unpassivated thin CIGS solar cell, the efficiency was improved up to 20.38% when the pitch of the GAPL was 7.5–12.5 μm. Furthermore, the efficiency was improved as the COW of the GAPL was decreased. The maximum efficiency value occurred when the COW was 100 nm because of the effective carrier recombination inhibition and high reflectivity of the Al2O3 insulator passivation with local contacts. These results indicate that the designed structure has optimized structural points for high-efficiency thin CIGS solar cells. Therefore, the photovoltaic (PV) generator and sensor designers can achieve the higher performance of photosensitive thin CIGS solar cells by considering these results.

scholarly journals High-Efficiency Polarizer Reflectarray Antennas for Data Transmission Links from a CubeSat

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1802
Author(s):  
Eduardo Martinez-de-Rioja ◽  
Daniel Martinez-de-Rioja ◽  
Rafael López-Sáez ◽  
Ignacio Linares ◽  
Jose A. Encinar
Keyword(s):  
Circular Polarization ◽  
Data Transmission ◽  
High Efficiency ◽  
High Gain ◽  
Dual Band ◽  
Left Handed ◽  
Linearly Polarized ◽  
Flat Profile ◽  
First Time ◽  
Collimated Beam

This paper presents two designs of high-efficiency polarizer reflectarray antennas able to generate a collimated beam in dual-circular polarization using a linearly polarized feed, with application to high-gain antennas for data transmission links from a Cubesat. First, an 18 cm × 18 cm polarizer reflectarray operating in the 17.2–22.7 GHz band has been designed, fabricated, and tested. The measurements of the prototype show an aperture efficiency of 52.7% for right-handed circular polarization (RHCP) and 57.3% for left-handed circular polarization (LHCP), both values higher than those previously reported in related works. Then, a dual-band polarizer reflectarray is presented for the first time, which operates in dual-CP in the frequency bands of 20 GHz and 30 GHz. The proposed antenna technology enables a reduction of the complexity and cost of the feed chain to operate in dual-CP, as a linear-to-circular polarizer is no longer required. This property, combined with the lightweight, flat profile and low fabrication cost of printed reflectarrays, makes the proposed antennas good candidates for Cubesat applications.

scholarly journals Low-pressure reversible axial fan with straight profile blades and relatively high efficiency

2012 ◽  
Vol 16 (suppl. 2) ◽  
pp. 593-603 ◽  
Author(s):  
Zivan Spasic ◽  
Sasa Milanovic ◽  
Vanja Sustersic ◽  
Boban Nikolic
Keyword(s):  
Numerical Simulations ◽  
High Efficiency ◽  
Suction Side ◽  
Standard Test ◽  
Maximum Efficiency ◽  
Specific Work ◽  
Blade Profile ◽  
Operating Characteristics ◽  
Axial Fan ◽  
Increase Energy Efficiency

The paper presents the design and operating characteristics of a model of reversible axial fan with only one impeller, whose reversibility is achieved by changing the direction of rotation. The fan is designed for the purpose of providing alternating air circulation in wood dryers in order to reduce the consumption of electricity for the fan and increase energy efficiency of the entire dryer. To satisfy the reversibility of flow, the shape of the blade profile is symmetrical along the longitudinal and transversal axes of the profile. The fan is designed with equal specific work of all elementary stages, using the method of lift forces. The impeller blades have straight mean line profiles. The shape of the blade profile was adopted after the numerical simulations were carried out and high efficiency was achieved. Based on the calculation and conducted numerical simulations, a physical model of the fan was created and tested on a standard test rig, with air loading at the suction side of the fan. The operating characteristics are shown for different blade angles. The obtained maximum efficiency was around 0.65, which represents a rather high value for axial fans with straight profile blades.

Theoretical Study on the Influence of Transmission Parameters on the Transmission Performance of Magnetic Resonance Wireless Power Transmission Systems

2014 ◽  
Vol 926-930 ◽  
pp. 434-439
Author(s):  
Chang Sheng Li ◽  
Juan Cao ◽  
He Zhang
Keyword(s):  
Magnetic Resonance ◽  
High Efficiency ◽  
Power Transmission ◽  
Maximum Efficiency ◽  
System Quality ◽  
Wireless Power ◽  
Transmission Performance ◽  
Wireless Power Transmission ◽  
Transmission Systems ◽  
Transmission Parameters

Magnetic resonance wireless power transmission technology is based on the phenomenon of resonant coupling to realize non-contact power transmission via near magnetic field. Based on the mutual coupling model of resonance system, the influence laws of system transmission parameters, such as coil coupling coefficients, load resistance, etc., on the transmission performance are theoretically studied in this paper. The research results shows that the power high-efficiency and high-quality transmission does not depend on the large coil loop coupling coefficient and the working frequencies of maximum power and maximum efficiency transmission do not coincide at most condition. Transmission systems with a high resonance frequency can produce high power and efficiency transmission over short distances. In addition, by increasing the coil diameter or wire diameter can improve the system quality factor, and optimize the energy transmission performance.

Sign in / Sign up

Export Citation Format

Share Document