scholarly journals Tailoring of Novel Azithromycin-Loaded Zinc Oxide Nanoparticles for Wound Healing

Pharmaceutics ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 111
Author(s):  
Mohammed S. Saddik ◽  
Mahmoud M. A. Elsayed ◽  
Mohamed A. El-Mokhtar ◽  
Haitham Sedky ◽  
Jelan A. Abdel-Aleem ◽  
...  
Keyword(s):  
Wound Healing ◽  
Zinc Oxide ◽  
Zinc Oxide Nanoparticles ◽  
Pathogenic Bacteria ◽  
Load Capacity ◽  
Healing Process ◽  
Maximum Load ◽  
Infection Model ◽  
Oxide Nanoparticles ◽  
Infected Wounds

Skin is the largest mechanical barrier against invading pathogens. Following skin injury, the healing process immediately starts to regenerate the damaged tissues and to avoid complications that usually include colonization by pathogenic bacteria, leading to fever and sepsis, which further impairs and complicates the healing process. So, there is an urgent need to develop a novel pharmaceutical material that promotes the healing of infected wounds. The present work aimed to prepare and evaluate the efficacy of novel azithromycin-loaded zinc oxide nanoparticles (AZM-ZnONPs) in the treatment of infected wounds. The Box–Behnken design and response surface methodology were used to evaluate loading efficiency and release characteristics of the prepared NPs. The minimum inhibitory concentration (MIC) of the formulations was determined against Staphylococcus aureus and Escherichia coli. Moreover, the anti-bacterial and wound-healing activities of the AZM-loaded ZnONPs impregnated into hydroxyl propyl methylcellulose (HPMC) gel were evaluated in an excisional wound model in rats. The prepared ZnONPs were loaded with AZM by adsorption. The prepared ZnONPs were fully characterized by XRD, EDAX, SEM, TEM, and FT-IR analysis. Particle size distribution for the prepared ZnO and AZM-ZnONPs were determined and found to be 34 and 39 nm, respectively. The mechanism by which AZM adsorbed on the surface of ZnONPs was the best fit by the Freundlich model with a maximum load capacity of 160.4 mg/g. Anti-microbial studies showed that AZM-ZnONPs were more effective than other controls. Using an experimental infection model in rats, AZM-ZnONPs impregnated into HPMC gel enhanced bacterial clearance and epidermal regeneration, and stimulated tissue formation. In conclusion, AZM -loaded ZnONPs are a promising platform for effective and rapid healing of infected wounds.

scholarly journals Wound Healing Composite Materials of Bacterial Cellulose and Zinc Oxide Nanoparticles with Immobilized Betulin Diphosphate

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 713
Author(s):  
Nina Melnikova ◽  
Alexander Knyazev ◽  
Viktor Nikolskiy ◽  
Peter Peretyagin ◽  
Kseniia Belyaeva ◽  
...  
Keyword(s):  
Wound Healing ◽  
Zinc Oxide ◽  
Bacterial Cellulose ◽  
Zinc Oxide Nanoparticles ◽  
Wound Dressings ◽  
Oxide Nanoparticles ◽  
Burn Wound ◽  
Zno Nps ◽  
Wound Model ◽  
And Oxidative Stress

A design of new nanocomposites of bacterial cellulose (BC) and betulin diphosphate (BDP) pre-impregnated into the surface of zinc oxide nanoparticles (ZnO NPs) for the production of wound dressings is proposed. The sizes of crystalline BC and ZnO NPs (5–25%) corresponded to 5–6 nm and 10–18 nm, respectively (powder X-ray diffractometry (PXRD), Fourier-infrared (FTIR), ultraviolet (UV), atomic absorption (AAS) and photoluminescence (PL) spectroscopies). The biological activity of the wound dressings “BC-ZnO NPs-BDP” was investigated in rats using a burn wound model. Morpho-histological studies have shown that more intensive healing was observed during treatment with hydrophilic nanocomposites than the oleophilic standard (ZnO NPs-BDP oleogel; p < 0.001). Treatment by both hydrophilic and lipophilic agents led to increases in antioxidant enzyme activity (superoxide dismutase (SOD), catalase) in erythrocytes and decreases in the malondialdehyde (MDA) concentration by 7, 10 and 21 days (p < 0.001). The microcirculation index was restored on the 3rd day after burn under treatment with BC-ZnO NPs-BDP wound dressings. The results of effective wound healing with BC-ZnO NPs-BDP nanocomposites can be explained by the synergistic effect of all nanocomposite components, which regulate oxygenation and microcirculation, reducing hypoxia and oxidative stress in a burn wound.

scholarly journals Plant Mediated Green Synthesis of Zinc Oxide Nanoparticles for Burn Wound Therapy

2020 ◽  
Author(s):  
Mohd Riyaz Beg ◽  
Shital Ghodinde ◽  
Vidhi Gupta
Keyword(s):  
Antimicrobial Activity ◽  
Wound Healing ◽  
Zinc Oxide ◽  
Green Synthesis ◽  
Zinc Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Burn Wound ◽  
Zno Nps ◽  
Burn Wounds ◽  
Burn Wound Healing

In this changing world, we all are surrounded by the surmountable risk of getting injured. Amongst various risk factors, major burns are the most distressing and catastrophic. Burn wounds are not easy to heal via natural healing process and ultimately ended up with scar formation. If the degree of burn is high then the loss of tissue and its function is very common. To fasten-up the natural burn wound healing; zinc, an essential trace element is found to be very much effective. But due to its&rsquo; particle size limitation, less contact with wounded cells and tissues, and high inherent toxicity restrict its use. Needlessly, zinc is an element with dual action i.e. both antimicrobial and wound healing it is a prime choice to apply its aptitude in burn wound healing. To overcome the documented limitations zinc has converted to nanoparticle form. Zinc oxide nanoparticles, in particular, have attained ample of interest due to their unique properties and potential antimicrobial activity along with wound healing activity which makes it promising for the healing of topical burn wounds. Plant mediated green synthesis of nano-metal oxide particles is gaining a lot of significance due to its simplicity, eco-friendliness and extensive antimicrobial activity and recommended as an appealing substitute to not only physical methods but also chemical methods avoiding the use of the high rate of toxic chemicals and extreme surroundings. This study includes ZnO NPs role in burn wound healing with Phyto-mediated synthesis methods to provide evidence of their potential applications. Additionally, it provides an overview of traditional methods used for the synthesis of ZnO nanoparticles and characterization techniques to obtain information concerning the size, shape and optical properties along with toxicity and safety concern of ZnO NPs and its biomedical applications.

scholarly journals Antibacterial Ferroelectric Hybrid Membranes Fabricated via Electrospinning for Wound Healing

Membranes ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 986
Author(s):  
Ivan V. Lukiev ◽  
Ludmila S. Antipina ◽  
Semen I. Goreninskii ◽  
Tamara S. Tverdokhlebova ◽  
Dmitry V. Vasilchenko ◽  
...  
Keyword(s):  
Wound Healing ◽  
Zinc Oxide ◽  
Zinc Oxide Nanoparticles ◽  
Vinylidene Fluoride ◽  
Antibacterial Properties ◽  
Oxide Nanoparticles ◽  
Hybrid Membranes ◽  
Electrospinning Technique ◽  
Β Phase

In the present study, wound healing ferroelectric membranes doped with zinc oxide nanoparticles were fabricated from vinylidene fluoride-tetrafluoroethylene copolymer and polyvinylpyrrolidone using the electrospinning technique. Five different ratios of vinylidene fluoride-tetrafluoroethylene to polyvinylpyrrolidone were used to control the properties of the membranes at a constant zinc oxide nanoparticle content. It was found that an increase of polyvinylpyrrolidone content leads to a decrease of the spinning solution conductivity and viscosity, causing a decrease of the average fiber diameter and reducing their strength and elongation. By means of X-ray diffraction and infrared spectroscopy, it was revealed that increased polyvinylpyrrolidone content leads to difficulty in crystallization of the vinylidene fluoride-tetrafluoroethylene copolymer in the ferroelectric β-phase in membranes. Changing the ratio of vinylidene fluoride-tetrafluoroethylene copolymer and polyvinylpyrrolidone with a constant content of zinc oxide nanoparticles is an effective approach to control the antibacterial properties of membranes towards Staphylococcus aureus. After carrying out in vivo experiments, we found that ferroelectric hybrid membranes, containing from five to ten mass percent of PVP, have the greatest wound-healing effect for the healing of purulent wounds.

scholarly journals Biosynthesized Zinc Oxide Nanoparticles Disrupt Established Biofilms of Pathogenic Bacteria

2022 ◽  
Vol 12 (2) ◽  
pp. 710
Author(s):  
Fohad Mabood Husain ◽  
Faizan Abul Qais ◽  
Iqbal Ahmad ◽  
Mohammed Jamal Hakeem ◽  
Mohammad Hassan Baig ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Zinc Oxide Nanoparticles ◽  
Pathogenic Bacteria ◽  
Oxide Nanoparticles ◽  
Antibiofilm Activity ◽  
Gram Negative Bacteria ◽  
Zno Nps ◽  
Gram Positive ◽  
Gram Negative ◽  
E Coli

Global emergence and persistence of the multidrug-resistant microbes have created a new problem for management of diseases associated with infections. The development of antimicrobial resistance is mainly due to the sub-judicious and unprescribed used of antimicrobials both in healthcare and the environment. Biofilms are important due to their role in microbial infections and hence are considered a novel target in discovery of new antibacterial or antibiofilm agents. In this article, zinc oxide nanoparticles (ZnO-NPs) were prepared using extract of Plumbago zeylanica. ZnO-NPs were characterized and then their antibiofilm activity was tested against Gram-positive and Gram-negative bacteria. The ZnO-NPs were polydispersed, and the average size was obtained as 24.62 nm. The presence of many functional groups indicated that phytocompounds of P. zeylanica were responsible for the synthesis, capping, and stabilization of ZnO-NPs. Synthesized NPs inhibited the biofilm formation of E. coli, S. aureus, and P. aeruginosa by 62.80%, 71.57%, and 77.69%, respectively. Likewise, concentration-dependent inhibition of the EPS production was recorded in all test bacteria. Microscopic examination of the biofilms revealed that ZnO-NPs reduced the bacterial colonization on solid support and altered the architecture of the biofilms. ZnO-NPs also remarkably eradicated the preformed biofilms of the test bacteria up to 52.69%, 59.79%, and 67.22% recorded for E. coli, S. aureus, P. aeruginosa, respectively. The findings reveal the ability of green synthesized zinc oxide nanoparticles to inhibit, as well as eradicate, the biofilms of Gram-positive and Gram-negative bacteria.

scholarly journals Local treatment of burn wounds in animals using a new nanocomponent ointment

2019 ◽  
Vol 135 ◽  
pp. 01084
Author(s):  
Natalia Fedota ◽  
Eduard Gorchakov ◽  
Bagama Bagamaev ◽  
Ivan Kireev ◽  
Valeriya Shahova ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Zinc Oxide Nanoparticles ◽  
Healing Process ◽  
Local Treatment ◽  
Healing Time ◽  
Laboratory Animals ◽  
Oxide Nanoparticles ◽  
Wound Surface ◽  
Active Components ◽  
Laboratory Rats

We have developed an ointment preparation consisting of silver and zinc oxide nanoparticles, which form the basis of the nanocomposition. This drug can reduce the healing time of the wound surface due to the inclusion of nanodispersed particles in the composition. Application of nanoparticles allows to reduce inflammatory process, to carry out disinfecting treatment of a wound surface from pathogenic microorganisms, and accordingly to create optimum conditions for reparative process. Nanocomposite preparation has many advantages over existing analogues without irritating and allergic effects. Due to the high adsorption capacity, it allows to accelerate the healing process of the damaged surface of the skin. Initial studies were conducted on laboratory rats at the age of 6 months with a close mass that was up to 250 g in accordance with international requirements for the use of laboratory animals. As a result of the experiment, a new ointment preparation based on silver and zinc oxide nanoparticles, which are active components of the nanocomposition, was obtained. The use of these components allowed to accelerate the process of reparative restoration of the skin with full recovery of the studied animals. As shown by the experience, the recovery rate on average accelerated by seven days, compared with similar drugs available on the pharmaceutical market.

scholarly journals Antimicrobial PAA/PAH Electrospun Fiber Containing Green Synthesized Zinc Oxide Nanoparticles for Wound Healing

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2889
Author(s):  
Marina Bandeira ◽  
Bor Shin Chee ◽  
Rafaele Frassini ◽  
Michael Nugent ◽  
Marcelo Giovanela ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Wound Healing ◽  
Zinc Oxide ◽  
Zinc Oxide Nanoparticles ◽  
Electrospun Fiber ◽  
Ilex Paraguariensis ◽  
Resistant Bacteria ◽  
Oxide Nanoparticles ◽  
Sem Images ◽  
Electrospinning Technique

Wound infections are the main complication when treating skin wounds. This work reports a novel antimicrobial material using green synthesized zinc oxide nanoparticles (ZnONPs) incorporated in polymeric fibers for wound healing purposes. ZnONPs are a promising antimicrobial nanomaterial with high activity against a range of microorganisms, including drug-resistant bacteria. The electrospun fibers were obtained using polyacrylic acid (PAA) and polyallylamine hydrochloride (PAH) and were loaded with ZnONPs green synthesized from Ilex paraguariensis leaves with a spherical shape and ~18 nm diameter size. The fibers were produced using the electrospinning technique and SEM images showed a uniform morphology with a diameter of ~230 nm. EDS analysis proved a consistent dispersion of Zn in the fiber mat, however, particle agglomerates with varying sizes were observed. FTIR spectra confirmed the interaction of PAA carboxylic groups with the amine of PAH molecules. Although ZnONPs presented higher antimicrobial activity against S. aureus than E. coli, resazurin viability assay revealed that the PAA/PAH/ZnONPs composite successfully inhibited both bacteria strains growth. Photomicrographs support these results where bacteria clusters were observed only in the control samples. The PAA/PAH/ZnONPs composite developed presents antimicrobial activity and mimics the extracellular matrix morphology of skin tissue, showing potential for wound healing treatments.

scholarly journals Zinc Oxide Nanoparticles Exhibit Favorable Properties to Promote Tissue Integration of Biomaterials

Biomedicines ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 1462
Author(s):  
Nadine Wiesmann ◽  
Simone Mendler ◽  
Christoph R. Buhr ◽  
Ulrike Ritz ◽  
Peer W. Kämmerer ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Zinc Oxide ◽  
Tissue Regeneration ◽  
Zinc Oxide Nanoparticles ◽  
Healing Process ◽  
Gelatin Sponge ◽  
Oxide Nanoparticles ◽  
Zno Nps ◽  
Tissue Integration ◽  
Wide Range

Due to the demographic change, medicine faces a growing demand for tissue engineering solutions and implants. Often, satisfying tissue regeneration is difficult to achieve especially when co-morbidities hamper the healing process. As a novel strategy, we propose the incorporation of zinc oxide nanoparticles (ZnO NPs) into biomaterials to improve tissue regeneration. Due to their wide range of biocompatibility and their antibacterial properties, ZnO NPs are already discussed for different medical applications. As there are versatile possibilities of modifying their form, size, and function, they are becoming increasingly attractive for tissue engineering. In our study, in addition to antibacterial effects of ZnO NPs, we show for the first time that ZnO NPs can foster the metabolic activity of fibroblasts as well as endothelial cells, both cell types being crucial for successful implant integration. With the gelatin sponge method performed on the chicken embryo’s chorioallantoic membrane (CAM), we furthermore confirmed the high biocompatibility of ZnO NPs. In summary, we found ZnO NPs to have very favorable properties for the modification of biomaterials. Here, incorporation of ZnO NPs could help to guide the tissue reaction and promote complication-free healing.

Sign in / Sign up

Export Citation Format

Share Document