scholarly journals The Effect of Chitosan on the Chemical Structure, Morphology, and Selected Properties of Polyurethane/Chitosan Composites

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1205
Author(s):  
Agnieszka Piotrowska-Kirschling ◽  
Joanna Brzeska
Keyword(s):  
Chemical Structure ◽  
Materials Science ◽  
Chemical Properties ◽  
Materials Synthesis ◽  
Physico Chemical ◽  
Structure Morphology ◽  
Basic Parameters ◽  
Properties Of Materials ◽  
The Impact ◽  
Positive Effect

Materials science is an interdisciplinary area of studies. This science focuses on the influence of the physico-chemical properties of materials on their application in human everyday lives. The materials’ synthesis should be developed in accordance with sustainable development. Polyurethanes (PUR) represent a significant consumption of plastic in the world. Modification of PUR, e.g., with polysaccharide of natural origin (chitosan, Chit), should have a positive effect on their functional properties and degradability in the natural environment. The basic parameters affecting the scope and direction of changes are the size and quantity of the chitosan particles. The impact assessment of chitosan on the chemical structure, morphology, thermal properties, crystallinity, mechanical properties, flammability, water sorption, adsorption properties, degradability, and biological activity of PUR/Chit composites (without other additives) is discussed in this article. To the best of our knowledge, recent literature does not contain a study discussing the direct impact of the presence of chitosan in the structure of PUR/Chit composite on its properties, regardless of the intended uses. This paper provides an overview of publications, which presents the results of a study on the effect of adding chitosan in polyurethane/chitosan composites without other additives on the properties of polyurethane.

scholarly journals The Impact of Filler Geometry on Polylactic Acid-Based Sustainable Polymer Composites

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 149
Author(s):  
Karol Leluk ◽  
Stanisław Frąckowiak ◽  
Joanna Ludwiczak ◽  
Tomasz Rydzkowski ◽  
Vijay Kumar Thakur
Keyword(s):  
Polymer Composites ◽  
Polylactic Acid ◽  
Matrix Material ◽  
Chemical Properties ◽  
Precipitated Calcium Carbonate ◽  
Cellulose Fibres ◽  
Shape Factors ◽  
Pure Cellulose ◽  
Physico Chemical ◽  
The Impact

Recently, biocomposites have emerged as materials of great interest to the scientists and industry around the globe. Among various polymers, polylactic acid (PLA) is a popular matrix material with high potential for advanced applications. Various particulate materials and nanoparticles have been used as the filler in PLA based matrix. One of the extensively studied filler is cellulose. However, cellulose fibres, due to their hydrophilic nature, are difficult to blend with a hydrophobic polymer matrix. This leads to agglomeration and creates voids, reducing the mechanical strength of the resulting composite. Moreover, the role of the various forms of pure cellulose and its particle shape factors has not been analyzed in most of the current literature. Therefore, in this work, materials of various shapes and shape factors were selected as fillers for the production of polymer composites using Polylactic acid as a matrix to fill this knowledge gap. In particular, pure cellulose fibres (three types with different elongation coefficient) and two mineral nanocomponents: precipitated calcium carbonate and montmorillonite were used. The composites were prepared by a melt blending process using two different levels of fillers: 5% and 30%. Then, the analysis of their thermomechanical and physico-chemical properties was carried out. The obtained results were presented graphically and discussed in terms of their shape and degree of filling.

scholarly journals Cell Behavior of Primary Fibroblasts and Osteoblasts on Plasma-Treated Fluorinated Polymer Coated with Honeycomb Polystyrene

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 889
Author(s):  
Klára Fajstavrová ◽  
Silvie Rimpelová ◽  
Dominik Fajstavr ◽  
Václav Švorčík ◽  
Petr Slepička
Keyword(s):  
Chemical Properties ◽  
Plasma Exposure ◽  
Research Teams ◽  
Polymer Substrates ◽  
Substrate Activation ◽  
Physico Chemical ◽  
Polystyrene Solution ◽  
Primary Fibroblasts ◽  
Positive Effect ◽  
Cell Adhesion And Proliferation

The development of new biocompatible polymer substrates is still of interest to many research teams. We aimed to combine a plasma treatment of fluorinated ethylene propylene (FEP) substrate with a technique of improved phase separation. Plasma exposure served for substrate activation and modification of surface properties, such as roughness, chemistry, and wettability. The treated FEP substrate was applied for the growth of a honeycomb-like pattern from polystyrene solution. The properties of the pattern strongly depended on the primary plasma exposure of the FEP substrate. The physico-chemical properties such as changes of the surface chemistry, wettability, and morphology of the prepared pattern were determined. The cell response of primary fibroblasts and osteoblasts was studied on a honeycomb pattern. The prepared honeycomb-like pattern from polystyrene showed an increase in cell viability and a positive effect on cell adhesion and proliferation for both primary fibroblasts and osteoblasts.

Chemical structure and physico-chemical properties of agar

Hydrobiologia ◽  
1991 ◽  
Vol 221 (1) ◽  
pp. 137-148 ◽  
Author(s):  
Marc Lahaye ◽  
Cyrille Rochas
Keyword(s):  
Chemical Structure ◽  
Chemical Properties ◽  
Physico Chemical

scholarly journals Unveiling the Efficiency of Vermicompost Derived from Different Biowastes on Wheat (Triticum aestivum L.) Plant Growth and Soil Health

Agronomy ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 791 ◽  
Author(s):  
Zubair Aslam ◽  
Safdar Bashir ◽  
Waseem Hassan ◽  
Korkmaz Bellitürk ◽  
Niaz Ahmad ◽  
...  
Keyword(s):  
Plant Growth ◽  
Temporal Trends ◽  
Soil Health ◽  
Chemical Properties ◽  
Test Plant ◽  
Cow Dung ◽  
Aphid Infestation ◽  
Physico Chemical ◽  
Chemical Attributes ◽  
The Impact

The present study was conducted to explore the role of different types of vermicomposts (VCs) prepared from different substrates to improve soil health (physical and chemical properties) and wheat plant growth under field conditions. Different combinations of vermicompost prepared from different substrates (cow dung, paper waste, and rice straw) and inorganic fertilizers were applied in soil using wheat as a test plant. The impact of three different VCs on physico-chemical characteristics and nutrient availability in soil was evaluated to examine their efficacy in combination with chemical fertilizers. Temporal trends in vermicomposting treatments at various stages showed significant improvement in physico-chemical attributes of the VCs substrates. All the plant physiological attributes showed significant response where N:P:K 100:50:50 kg ha−1 + 10 t ha−1 cow dung vermicompost was applied. In addition, post-harvest analysis of soil not only revealed that different combinations of the vermicomposting treatments improved the soil health by improving the physico-chemical attributes of the soil. Conclusively, application of cow dung vermicompost along with recommended NPK not only improved crop yield, soil health, reduced insect (aphid) infestation but also fortified grains with Zn and Fe.

scholarly journals IMPACT OF AGRO-ENVIRONMENTAL SYSTEMS ON SOIL EROSION PROCESSES AND SOIL PROPERTIES ON HILLY LANDSCAPE IN WESTERN LITHUANIA

2015 ◽  
Vol 24 (1) ◽  
pp. 60-69 ◽  
Author(s):  
Gintaras JARAŠIŪNAS ◽  
Irena KINDERIENĖ
Keyword(s):  
Soil Erosion ◽  
Soil Properties ◽  
Soil Ph ◽  
Soil Texture ◽  
Sandy Loam ◽  
Chemical Properties ◽  
Available Phosphorus ◽  
Erosion Processes ◽  
Physico Chemical ◽  
The Impact

The objective of this study was to evaluate the impact of different land use systems on soil erosion rates, surface evolution processes and physico-chemical properties on a moraine hilly topography in Lithuania. The soil of the experimental site is Bathihypogleyi – Eutric Albeluvisols (abe–gld–w) whose texture is a sandy loam. After a 27-year use of different land conservation systems, three critical slope segments (slightly eroded, active erosion and accumulation) were formed. Soil physical properties of the soil texture and particle sizes distribution were examined. Chemical properties analysed for were soil ph, available phosphorus (P) and potassium (K), soil organic carbon (SOC) and total nitrogen (N). We estimated the variation in thickness of the soil Ap horizon and soil physico-chemical properties prone to a sustained erosion process. During the study period (2010–2012) water erosion occurred under the grain– grass and grass–grain crop rotations, at rates of 1.38 and 0.11 m3 ha–1 yr–1, respectively. Soil exhumed due to erosion from elevated positions accumulated in the slope bottom. As a result, topographic transfiguration of hills and changes in soil properties occurred. However, the accumulation segments of slopes had significantly higher silt/clay ratios and SOC content. In the active erosion segments a lighter soil texture and lower soil ph were recorded. Only long-term grassland completely stopped soil erosion effects; therefore geomorphologic change and degradation of hills was estimated there as minimal.

scholarly journals MRI Relaxivity Changes of the Magnetic Nanoparticles Induced by Different Amino Acid Coatings

Nanomaterials ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 394 ◽  
Author(s):  
Iryna Antal ◽  
Oliver Strbak ◽  
Iryna Khmara ◽  
Martina Koneracka ◽  
Martina Kubovcikova ◽  
...  
Keyword(s):  
Magnetic Nanoparticles ◽  
Chemical Properties ◽  
Hydrodynamic Diameter ◽  
Contrast Imaging ◽  
Dispersed Particles ◽  
Physico Chemical ◽  
The One ◽  
Molecular Contrast ◽  
The Impact ◽  
Positively Charged

In this study, we analysed the physico-chemical properties of positively charged magnetic fluids consisting of magnetic nanoparticles (MNPs) functionalised by different amino acids (AAs): glycine (Gly), lysine (Lys) and tryptophan (Trp), and the influence of AA–MNP complexes on the MRI relaxivity. We found that the AA coating affects the size of dispersed particles and isoelectric point, as well as the zeta potential of AA–MNPs differently, depending on the AA selected. Moreover, we showed that a change in hydrodynamic diameter results in a change to the relaxivity of AA–MNP complexes. On the one hand, we observed a decrease in the relaxivity values, r1 and r2, with an increase in hydrodynamic diameter (the relaxivity of r1 and r2 were comparable with commercially available contrast agents); on the other hand, we observed an increase in r2* value with an increase in hydrodynamic size. These findings provide an interesting preliminary look at the impact of AA coating on the relaxivity properties of AA–MNP complexes, with a specific application in molecular contrast imaging originating from magnetic nanoparticles and magnetic resonance techniques.

scholarly journals Evaluation of the Physico-Chemical Properties of Liposomes Assembled from Bioconjugates of Anisic Acid with Phosphatidylcholine

2021 ◽  
Vol 22 (23) ◽  
pp. 13146
Author(s):  
Hanna Pruchnik ◽  
Anna Gliszczyńska ◽  
Aleksandra Włoch
Keyword(s):  
Phase Transition ◽  
Lipid Bilayer ◽  
Chemical Properties ◽  
Main Phase ◽  
Cancer Therapies ◽  
Dependent Manner ◽  
Scanning Calorimetry ◽  
Physico Chemical ◽  
Anisic Acid ◽  
The Impact

The aim of this work was the evaluation of the physico-chemical properties of a new type of liposomes that are composed of DPPC and bioconjugates of anisic acid with phosphatidylcholine. In particular, the impact of modified anisic acid phospholipids on the thermotropic parameters of liposomes was determined, which is crucial for using them as potential carriers of active substances in cancer therapies. Their properties were determined using three biophysical methods, namely differential scanning calorimetry (DSC), steady-state fluorimetry and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Moreover, temperature studies of liposomes composed of DPPC and bioconjugates of anisic acid with phosphatidylcholine provided information about the phase transition, fluidity regarding chain order, hydration and dynamics. The DSC results show that the main phase transition peak for conjugates of anisic acid with phosphatidylcholine molecules was broadened and shifted to a lower temperature in a concentration- and structure-dependent manner. The ATR-FTIR results and the results of measurements conducted using fluorescent probes located at different regions in the lipid bilayer are in line with DSC. The results show that the new bioconjugates with phosphatidylcholine have a significant impact on the physico-chemical properties of a membrane and cause a decrease in the temperature of the main phase transition. The consequence of this is greater fluidity of the lipid bilayer.

scholarly journals Interdisciplinary Projects Applied to Chemistry Lessons: Example of Chemistry Linked to Food Science

2020 ◽  
Vol 74 (3) ◽  
pp. 196-198
Author(s):  
Lydie Moreau ◽  
Véronique Breguet Mercier
Keyword(s):  
Ascorbic Acid ◽  
Network Formation ◽  
Chemical Properties ◽  
Working Environment ◽  
Food Science ◽  
Physico Chemical ◽  
Interdisciplinary Projects ◽  
The Impact ◽  
Design Experiments ◽  
Good Organization

An interdisciplinary project regarding the effect of ascorbic acid on bread dough's physico-chemical properties was proposed to bachelor students in chemistry and food sciences. Such an approach was proposed to develop both scientific and soft skills, in order to prepare students for their future working environment. Together, students deepened their knowledge regarding food science and chemistry. They were then able to plan and design experiments demonstrating the impact of gluten network formation and ascorbic acid influence onto bread dough and finished product characteristics. This way of teaching was very appreciated by students, nevertheless it highlighted the fact that the professors' investment was considerably high, and that good organization, alignment and preparation prior to the start of this project is key.

scholarly journals Exploring New Synthetic Strategies for the Production of Advanced Complex Inorganic Nanocrystals

2015 ◽  
Vol 229 (1-2) ◽  
Author(s):  
Neus G. Bastús ◽  
Edgar Gonzalez ◽  
Joan Esteve ◽  
Jordi Piella ◽  
Javier Patarroyo ◽  
...  
Keyword(s):  
Materials Science ◽  
Chemical Properties ◽  
Synthetic Methods ◽  
Colloidal Synthesis ◽  
Hollow Structures ◽  
Physico Chemical ◽  
Composition And Structure ◽  
Wide Range ◽  
Potential Applicability ◽  
New Generation

AbstractThe design of new protocols for the colloidal synthesis of complex nanocrystals (NCs) with advanced functionalities, comprising both hybrid and hollow structures, and the study of their fundamental properties is of paramount importance for the development of a new generation of nanostructured materials. The possibility of tailoring the dimensional regime of NCs, along with its composition and structure, represents a landmark achievement in the control of their unique physico-chemical properties. These properties, alongside with the ability to cheaply produce high quality NCs in fairly large amounts by wet-chemistry techniques, leads to their potential applicability from materials science to nanomedicine. Within this context, this review is focused on describing a successful framework for designing synthetic strategies for the production of advanced complex NCs, integrating the development of new synthetic methods with its structural characterization, monitoring of their properties, and study of its reactivity. As a result, it is expected to provide new routes to produce robust and easy-to-process NCs in a wide range of sizes, shapes and configurations that can be explored to achieve the combination of all degrees of control, aiming to produce a complete and diverse library of material combinations that will expand its applicability in a wide diversity of fields.

Sign in / Sign up

Export Citation Format

Share Document