scholarly journals Glycerin/NaOH Aqueous Solution as a Green Solvent System for Dissolution of Cellulose

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1735
Author(s):  
Ke Li ◽  
Huiyu Yang ◽  
Lang Jiang ◽  
Xin Liu ◽  
Peng Lang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Solvent System ◽  
Industrial Applications ◽  
Degree Of Polymerization ◽  
Green Solvent ◽  
Mixed Aqueous Solution ◽  
Before And After ◽  
Solvent Systems ◽  
The Difference ◽  
Ubbelohde Viscometer

Dissolving cellulose in water-based green solvent systems is highly desired for further industrial applications. The green solvent glycerin—which contains hydrogen-bonding acceptors—was used together with NaOH and water to dissolve cellulose. This mixed aqueous solution of NaOH and glycerin was employed as the new green solvent system for three celluloses with different degree of polymerization. FTIR (Fourier-transform infrared), XRD (X-ray diffractometer) and TGA (thermogravimetric analysis) were used to characterize the difference between cellulose before and after regenerated by HCl. A UbbeloHde viscometer was used to measure the molecule weight of three different kinds of cellulose with the polymerization degree of 550, 600 and 1120. This solvent system is useful to dissolve cellulose with averaged molecule weight up to 2.08 × 105 g/mol.

scholarly journals Determination of Inulin in Foods

2000 ◽  
Vol 83 (3) ◽  
pp. 675-678 ◽  
Author(s):  
Breda Simonovska
Keyword(s):  
Standard Deviation ◽  
Oxalic Acid ◽  
Thin Layer ◽  
Degree Of Polymerization ◽  
Test Solution ◽  
Boiling Water Bath ◽  
Before And After ◽  
The Mean ◽  
The Difference

Abstract A method was developed for determining fructan inulin in various foods (yogurts, honey cakes, chocolates). Warm water was applied for extraction of samples, and mono- and dissacharides were determined by a thin-layer chromatographic densitometric method. A portion of the test solution was hydrolyzed 30 min with 1% oxalic acid in a boiling water bath. Fructose was determined in the hydrolysate. The amount of inulin in a sample was calculated as the difference between the amount of fructose in the sample before and after hydrolysis. The fructose from sucrose formed during the hydrolysis was also considered. The mean recovery from yogurt fortified with 4% inulin was 95.5 ± 4.5% (mean ± standard deviation); from honey cakes extract fortified with 10% inulin, 97.3 ± 5.5%; and from chocolate extract fortified with 30% inulin, 98.6 ± 6.6% (6 replicates in all cases). Determination of glucose is not necessary for analyzing fructans with the composition expressed shortened to GFn−1 (G, glucose; F, fructosyl) with the average degree of polymerization 8 ≤ n ≤ 15.

Tem analysis of multiple-energy arsenic implanted and Rta'd silicon

1987 ◽  
Vol 45 ◽  
pp. 246-247
Author(s):  
R.A. Herring
Keyword(s):  
Device Fabrication ◽  
High Concentration ◽  
Tem Analysis ◽  
Defect Clusters ◽  
High Fluences ◽  
Small Defect ◽  
Before And After ◽  
The Matrix ◽  
The Difference ◽  
Factor Type

Rapid thermal annealing (RTA) of ion-implanted Si is important for device fabrication. The defect structures of 2.5, 4.0, and 6.0 MeV As-implanted silicon irradiated to fluences of 2E14, 4E14, and 6E14, respectively, have been analyzed by electron diffraction both before and after RTA at 1100°C for 10 seconds. At such high fluences and energies the implanted As ions change the Si from crystalline to amorphous. Three distinct amorphous regions emerge due to the three implantation energies used (Fig. 1). The amorphous regions are separated from each other by crystalline Si (marked L1, L2, and L3 in Fig. 1) which contains a high concentration of small defect clusters. The small defect clusters were similar to what had been determined earlier as being amorphous zones since their contrast was principally of the structure-factor type that arises due to the difference in extinction distance between the matrix and damage regions.

Changes in Platelet Aggregability after Ovariectomy

1979 ◽  
Vol 42 (04) ◽  
pp. 1332-1339 ◽  
Author(s):  
Hiroh Yamazaki ◽  
Takeshi Motomiya ◽  
Minoru Sonoda ◽  
Noboru Miyagawa
Keyword(s):  
Platelet Count ◽  
Platelet Activation ◽  
Ovarian Hormones ◽  
Control Group ◽  
Platelet Aggregability ◽  
Appearance Rate ◽  
Before And After ◽  
The Difference ◽  
Induced Aggregation ◽  
Observation Period

SummaryChanges in platelets in 48 patients with uterine myoma before and after hysterectomy with and without ovariectomy were examined. Bilateral ovariectomy in 25 cases (ovariec-tomized group) and unilateral or non-ovariectomy in 23 cases (control group) were performed at the hysterectomy. Platelet count and an appearance rate of secondary aggregation decreased at one day after and increased at one week after the operation, similarly in both the ovariectomized and the control group. The appearance rate of secondary aggregation was reflected in an intensity of aggregation at 5 min after the addition of reagent to PRP. At one month after the operation, the appearance rate of secondary aggregation induced by 3 μM ADP showed a statistically significant decrease in comparison with the preoperation value (P <0.05) and the enhancement of 5-min aggregation was still observed in the control group, while ceased in the ovariectomized group. The difference between the two groups was significant (P < 0.05). There was almost no change in the speed and intensity of primary and secondary aggregation during the observation period. No significant differences in collagen-induced aggregation were noted between the two groups. The results suggest that ovarian hormones, mainly estrogen, facilitate platelet activation which is mediated by the so-called secondary aggregation.

PENGARUH TERAPI TERTAWA TERHADAP PENURUNAN TEKANAN DARAH LANSIA DI UPT PANTI WREDHA BUDHI DHARMA YOGYAKARTA

2019 ◽  
Vol 13 (1) ◽  
Author(s):  
Niken Setyaningrum ◽  
Andri Setyorini ◽  
Fachruddin Tri Fitrianta
Keyword(s):  
Blood Pressure ◽  
Data Analysis ◽  
The Elderly ◽  
Control Group ◽  
Group Comparison ◽  
Control Blood Pressure ◽  
Men And Women ◽  
Treatment Of Hypertension ◽  
Before And After ◽  
The Difference

ABSTRACTBackground: Hypertension is one of the most common diseases, because this disease is suffered byboth men and women, as well as adults and young people. Treatment of hypertension does not onlyrely on medications from the doctor or regulate diet alone, but it is also important to make our bodyalways relaxed. Laughter can help to control blood pressure by reducing endocrine stress andcreating a relaxed condition to deal with relaxation.Objective: The general objective of the study was to determine the effect of laughter therapy ondecreasing elderly blood pressure in UPT Panti Wredha Budhi Dharma Yogyakarta.Methods: The design used in this study is a pre-experimental design study with one group pre-posttestresearch design where there is no control group (comparison). The population in this study wereelderly aged over> 60 years at 55 UPT Panti Wredha Budhi Dharma Yogyakarta. The method oftaking in this study uses total sampling. The sample in this study were 55 elderly. Data analysis wasused to determine the difference in blood pressure before and after laughing therapy with a ratio datascale that was using Pairs T-TestResult: There is an effect of laughing therapy on blood pressure in the elderly at UPT Panti WredhaBudhi Dharma Yogyakarta marked with a significant value of 0.000 (P <0.05)

Klein with Lacan: A Study on the Reception of Lacanian Ideas in Uruguay and Its Effects on Clinical Practices (1955–82)

2020 ◽  
Vol 22 (3) ◽  
pp. 341-361
Author(s):  
Gonzalo Grau-Pérez ◽  
J. Guillermo Milán
Keyword(s):  
Clinical Practice ◽  
Clinical Material ◽  
Clinical Practices ◽  
Before And After ◽  
The Difference ◽  
The 1960S ◽  
The Relationship ◽  
Discursive Approach ◽  
The Way ◽  
Clinical Cases

In Uruguay, Lacanian ideas arrived in the 1960s, into a context of Kleinian hegemony. Adopting a discursive approach, this study researched the initial reception of these ideas and its effects on clinical practices. We gathered a corpus of discursive data from clinical cases and theoretical-doctrinal articles (from the 1960s, 1970s and 1980s). In order to examine the effects of Lacanian ideas, we analysed the difference in the way of interpreting the clinical material before and after Lacan's reception. The results of this research illuminate some epistemological problems of psychoanalysis, especially the relationship between theory and clinical practice.

FRACTIONAL DETERMINATIONS OF URINARY 17-KETOSTEROIDS IN HYPEREMESIS GRAVIDARUM

1962 ◽  
Vol 41 (1) ◽  
pp. 123-128 ◽  
Author(s):  
Pentti A. Järvinen ◽  
Sykkö Pesonen ◽  
Pirkko Väänänen
Keyword(s):  
Hyperemesis Gravidarum ◽  
First Trimester ◽  
Control Group ◽  
Before And After ◽  
Daily Urine ◽  
First Trimester Of Pregnancy ◽  
The Difference

ABSTRACT The fractional determination of 17-ketosteroids in the daily urine was performed in nine cases of hyperemesis gravidarum and in four control cases, in the first trimester of pregnancy both before and after corticotrophin administration. The excretion of total 17-KS is similar in the two groups. Only in the hyperemesis group does the excretion of total 17-KS increase significantly after corticotrophin administration. The fractional determination reveals no difference between the two groups of patients with regard to the values of the fractions U (unidentified 17-KS), A (androsterone) and Rest (11-oxygenated 17-KS). The excretion of dehydroepiandrosterone is significantly higher in the hyperemesis group than in the control group. The excretion of androstanolone seems to be lower in the hyperemesis group than in the control group, but the difference is not statistically significant. The differences in the correlation between dehydroepiandrosterone and androstanolone in the two groups is significant. The high excretion of dehydroepiandrosterone and low excretion of androstanolone in cases of hyperemesis gravidarum is a sign of adrenal dysfunction.

OPTIMIZATION OF THIN LAYER CHROMATOGRAPHY METHODS FOR SEPARATION AND IDENTIFICATION OF ANTIDEPRESSANTS IN THEIR MIXTURE

2014 ◽  
Vol 21 (1) ◽  
pp. 11-15
Author(s):  
Daiva Kazlauskienė ◽  
Guoda Kiliuvienė ◽  
Palma Nenortienė ◽  
Giedrė Kasparavičienė ◽  
Ieva Matukaitytė
Keyword(s):  
Thin Layer ◽  
Thin Layer Chromatography ◽  
Solvent System ◽  
Ammonia Solution ◽  
Relative Standard ◽  
Rf Values ◽  
Solvent Systems ◽  
Paroxetine Hydrochloride ◽  
Fluvoxamine Maleate ◽  
Layer Chromatography

By conducting the toxicological analysis it is meaningful to determine the analytical system that could identify simultaneously several medicinal preparations quickly and precisely. The purpose of this work was to create and validate the method of thin-layer chromatography that would be suitable to separate the components of antidepressant mixture (amitriptyline hydrochloride, paroxetine hydrochloride, sertraline hydrochloride, fluvoxamine maleate and buspirone hydrochloride) and to identify them. The system was validated with regard to the sensitivity, repetition of data, resistance and particularity. The solvent systems with potential of high separation of components in their mixture were created: acetonitrile, methanol, ammonia solution 25 percent (85:10:5); acetonitrile, methanol, ammonia solution 25 percent (75:20:5); dichlormethane, 1,4-dioxane, ammonia solution 25 percent (50:45:5); dichlormethane, 1,4-dioxane, ammonia solution 25 percent (42:55:3); trichlormethane, 1,4-dioxane, ammonia solution 25 percent (25:70:5); trichlormethane, 1,4-dioxane, ammonia solution 25 percent (60:36:4). One of the most suitable solvent systems for separation of the analyzed mixture (sertraline, amitriptyline, paroxetine, buspirone, fluvoxamine) was determined – acetonitrile, methanol, ammonia solution 25 percent (85:10:5). When this solvent system was used, the average Rf values of the analyzed compounds differed the most. Validation was conducted – the relative standard deviation (RSD, percent) of the average Rf value of the analyzed compounds varied from 0,6 to 1,8 percent and did not exceed the permissible error of 5 percent. The sensitivity of methodology was determined by assessing the intensity of the mixture’s spots on the chromatographic plate. The detection limit of buspirone was 0,0012 µg; sertraline – 0,0008 µg; amitriptyline – 0,0004 µg; fluvoxamine – 0,0004 µg; paroxetine – 0,0008 µg. The resistance of results to the changed conditions – it was determined that when the amounts of the solvents acetonitrile and methanol were increased or decreased to two milliliters, the average Rf values of the analyzed compounds did not change statistically significantly

Automatic Tread Gaging Machine

1979 ◽  
Vol 7 (1) ◽  
pp. 31-39
Author(s):  
G. S. Ludwig ◽  
F. C. Brenner
Keyword(s):  
Experimental Tests ◽  
Automatic Machine ◽  
Wear Rates ◽  
Handling Device ◽  
Straight Line ◽  
Component Systems ◽  
Before And After ◽  
Good Repeatability ◽  
The Difference ◽  
Straight Lines

Abstract An automatic tread gaging machine has been developed. It consists of three component systems: (1) a laser gaging head, (2) a tire handling device, and (3) a computer that controls the movement of the tire handling machine, processes the data, and computes the least-squares straight line from which a wear rate may be estimated. Experimental tests show that the machine has good repeatability. In comparisons with measurements obtained by a hand gage, the automatic machine gives smaller average groove depths. The difference before and after a period of wear for both methods of measurement are the same. Wear rates estimated from the slopes of straight lines fitted to both sets of data are not significantly different.

Arene Dearomatization via Radical Hydroarylation

2019 ◽  
Author(s):  
Autumn Flynn ◽  
Kelly McDaniel ◽  
Meredith Hughes ◽  
David Vogt ◽  
Nathan Jui
Keyword(s):  
Precious Metal ◽  
Room Temperature ◽  
Aryl Halide ◽  
Solvent System ◽  
Benzene Derivatives ◽  
Green Solvent ◽  
Photocatalytic System

A photocatalytic system for the dearomative hydroarylation of benzene derivatives has been developed. Using a combination of an organic photoredox catalyst and an amine reductant, this process operates through a reductive radical-polar crossover mechanism where aryl halide reduction triggers a regioselective cyclization event, giving rise to a range of complex spirocyclic cyclohexadienes. This light-driven protocol functions at room temperature in a green solvent system (aq. MeCN), without the need for precious metal-based catalysts or reagents, or the generation of stoichiometric metal byproducts.

Degree of Conversion of Light Cured Resin Cements Polymerized under Two Thicknesses of Different Lithium Silicate Ceramics

2020 ◽  
Author(s):  
Mohamed Abdel Rahman Maraghy
Keyword(s):  
Degree Of Polymerization ◽  
Resin Cement ◽  
Lithium Silicate ◽  
Resin Cements ◽  
Ceramic Disc ◽  
Ceramic Disk ◽  
The Difference ◽  
Light Cure Unit ◽  
Glass Slab ◽  
Finger Pressure

Objective: To show the consequence of two thicknesses of ceramic on the polymerization of resin cement light cured when three different lithium silicate ceramics were used. Materials and Methods: 42 ceramic slices were prepared from three types of ceramics, Emax CAD, Celtra Duo CAD and Vita suprinity CAD (n=14). They were further divided into two subgroups according to thicknesses into sub group thickness 0.5mm and sub group thickness 1mm (n=7). Teflon moulds were fabricated with specific dimensions, where the ceramic disc was placed followed by light cured resin cement Bisco choice 2 veneer and a glass slab with finger pressure applied. Curing with Ascent® PX LED light cure unit for 20 seconds took place, where the tip placed over the ceramic sample directly. Cement film was then separated from the ceramic disk and subjected to analysis by Fourier Transform Infrared Spectroscope. Uncured cement samples were also subjected to analysis. Results: Celtra DUO CAD ceramic showed higher degree of polymerization that of Emax and Vita suprinity while the difference between Emax and Suprinity on the degree of polymerization was not significant. Also, ceramic thicknesses had a significant effect on the degree of polymerization of the resin cement. Conclusion: Thickness of ceramics up to 1mm affects the polymerization of resin cement significantly.

Sign in / Sign up

Export Citation Format

Share Document