scholarly journals Mechanical Properties of Hybrid Carbonized Plant Fibers Reinforced Bio-Based Epoxy Laminates

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3435
Author(s):  
Edgar Franco-Urquiza ◽  
Raúl Saleme-Osornio ◽  
Rodrigo Ramírez-Aguilar
Keyword(s):  
Mechanical Properties ◽  
Thermal Shock ◽  
Storage Modulus ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Viscoelastic Behavior ◽  
Volume Ratio ◽  
Process Variations ◽  
Plant Fibers ◽  
Porosity Level

In this work, henequen and ixlte plant fibers were carbonized in a horizontal quartz tube furnace. Several carbonized and non-carbonized fiber fabric configurations were impregnated with a bio-based epoxy resin through the infusion process. The infrared spectra revealed characteristic bands of styrene instead of organic compounds, representing that the carbonization procedure was adequate to carbonize the plant fibers. The porosity volume ratio for the non-carbonized henequen laminates showed the highest number of voids >1.9%, and the rest of the composites had a similar void density between 1.2–1.7%. The storage modulus of the non-carbonized and carbonized henequen laminates resulted in 2268.5 MPa and 2092.1 MPa, respectively. The storage modulus of the carbonized ixtle laminates was 1541.4 MPa, which is 37.8% higher than the non-carbonized ixtle laminates and 12% higher than henequen composites. The laminates were subject to thermal shock cycling, and tomography scans revealed no alterations on the porosity level or in the cracks after the cycling procedure. Thermal shock cycling promoted the post-curing effect by increasing the glass transition temperature. The viscoelastic results showed a variation in the storage modulus when the carbonized fiber fabrics were located between natural fiber fabrics, which was attributed to more excellent compaction during the infusion process. Variations in the viscoelastic behavior were observed between the different types of natural fibers, which influenced the mechanical properties.

Surface treatments of plant fibers and their effects on mechanical properties of fiber-reinforced composites: A review

2018 ◽  
Vol 38 (1) ◽  
pp. 15-30 ◽  
Author(s):  
Rashid Latif ◽  
Saif Wakeel ◽  
Noor Zaman Khan ◽  
Arshad Noor Siddiquee ◽  
Shyam Lal Verma ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Physical And Mechanical Properties ◽  
Surface Treatments ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Plant Fibers ◽  
Specific Strength

The need of natural fiber-reinforced composites is increasing at very fast rate because of their ecofriendly production, decomposition, high specific strength, abundance, good physical and mechanical properties. Available literature reveals that past researchers have done a lot of work for the preparation and characterization of fiber-reinforced composites. While developing natural fiber composites, researchers encountered various problems like hydrophilic nature of natural fibers, incompatibility of natural fibers with matrix materials, thermal instability of natural fibers, and poor interfacial bonding between reinforcing phase and matrix phase. However, some of these problems can be solved to a greater extent by considering surface treatment of natural fibers before they are used in the preparation of fiber-reinforced composites. Thus, there is a need for understanding the effect of several surface treatments on the mechanical properties of fiber-reinforced composites. The aim of this paper is to put forth a comprehensive review on the effects of different surface treatments on the mechanical properties such as tensile strength, flexural strength, and impact strength and also interfacial shear strength of the fiber-reinforced composites.

scholarly journals Valorization of Invasive Plants from Macaronesia as Filler Materials in the Production of Natural Fiber Composites by Rotational Molding

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2220
Author(s):  
Zaida Ortega ◽  
Francisco Romero ◽  
Rubén Paz ◽  
Luis Suárez ◽  
Antonio Nizardo Benítez ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Invasive Plant ◽  
Natural Fiber ◽  
Ricinus Communis ◽  
Local Level ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Filler Materials ◽  
Natural Fiber Composites ◽  
Rotational Molding

This paper compares the mechanical properties of different natural fiber composites produced by rotational molding as a way of waste valorization from campaigns to control invasive plant species in Macaronesia. Rotomolded parts produced with polymeric matrices (polyethylene) and filled with up to 20% by weight of cellulosic fibers obtained from Arundo donax L., Pennisetum setaceum, and Ricinus communis plants were characterized in terms of tensile, flexural, and impact strength. It was found that the sieving of natural fibers allowed for their introduction in higher loadings, from 10 (for un-sieved material) to 20%; fiber size greatly affected the mechanical properties of the final parts, although some combinations were proven not to reduce the mechanical properties of the neat resin. This study is a first approach to the valorization of residues obtained from periodic campaigns of the control of invasive species performed by public authorities, usually at the local level. It is important to highlight that the main objective of this research did not focus on economically profitable activity; instead, it was focused on the reduction of wastes to be disposed from ecosystem maintenance actions and the investment of potential income into preservation policies.

scholarly journals Effect of Natural Fiber (NF) Mix on Mechanical Strength of NF Plastic Composites (NFPC)

2019 ◽  
Vol 9 (1) ◽  
pp. 5663-5667
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Natural Fiber ◽  
Fiber Type ◽  
Natural Fibers ◽  
Natural Fibre ◽  
Additional Advantage ◽  
Plastic Composites ◽  
Twin Screw ◽  
The Impact

Natural fibers from plants are gaining importance and may substitute wood in the production of wood plastic composites (WPC). To ensure continuity of fiber supply and sustainability of WPC industries, fibers of various types could be mixed together to obtain Mix WPC. However, research need to be carried out to identify the contribution of different fiber type collectively to the mechanical properties of Mix natural fiber polymer composite (NFPC). In this study, preliminary work on the use of natural fibre (NF) such as kenaf, sugar palm and pineapple leaf fibers in the preparation of Mix NFPC were carried out. Four different fiber mix samples with different fiber ratio and size were formulated using polypropylene (PP) as the polymer matrix. Montmorrilonite (MMT) filler was added at constant amount for enhancement of composite mechanical properties. Samples were mixed and prepared using a twin screw extruder and mini injection moulding resepectively. Individual fibers and NFPC prepared were characterized using thermogravimetric analyzer (TGA). Tensile, flexural and impact strength of the composites were determined. Generally, it was found that addition of fiber mix at 50% fiber loading enhance the tensile and flexural strength of the various NFPC with minimal exceptions. The impact strength of the composites were comparable to that of blank PP implying that addition of fiber gives additional advantage besides being eco-friendly. It was also found that higher kenaf loading and different size of fiber mix contribute positively to the various strengths measured. In addition to that, composition of individual fibers also contribute to the mechanical properties of the NFPCs

Effect of Mechanical Properties on Various Surface Treatment Processes of Banana/Cotton Woven Fabric Vinyl Ester Composite

2017 ◽  
Vol 867 ◽  
pp. 41-47 ◽  
Author(s):  
Chitra Umachitra ◽  
N.K. Palaniswamy ◽  
O.L. Shanmugasundaram ◽  
P.S. Sampath
Keyword(s):  
Mechanical Properties ◽  
Composite Structures ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Surface Treatments ◽  
Fiber Reinforced Polymer ◽  
Woven Fabric ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Structural Applications

Natural fibers have been used to reinforce materials in many composite structures. Many types of natural fibers have been investigated including flax, hemp, ramie, sisal, abaca, banana etc., due to the advantage that they are light weight, renewable resources and have marketing appeal. These agricultural wastes can also be used to prepare fiber reinforced polymer hybrid composites in various combinations for commercial use. Application of composite materials in structural applications has presented the need for the engineering analysis. The present work focuses on the fabrication of polymer matrix composites by using natural fibers like banana and cotton which are abundant in nature and analysing the effect of mechanical properties of the composites on different surface treatments on the fabric. The effect of various surface treatments (NaOH, SLS, KMnO4) on the mechanical properties namely tensile, flexural and impact was analyzed and are discussed in this project. Analysing the material characteristics of the compression moulded composites; their results were measured on sections of the material to make use of the natural fiber reinforced polymer composite material for automotive seat shell manufacturing.

Natural Fiber Reinforced Synthetic Polymer Composites

2019 ◽  
Vol 23 ◽  
pp. 6-30
Author(s):  
Volkan Uğraşkan ◽  
Abdullah Toraman ◽  
A. Binnaz Hazar Yoruç
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibers ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Thermal And Mechanical Properties ◽  
Fiber Reinforced ◽  
Promising Alternative ◽  
Alternative Sources

In early composite materials, the use of petroleum based fibers such as glass and carbon fibers, aramid etc. was common. In order to reduce the dependency on petroleum based sources and environmental pollution, researchers have focused on the search for alternative sources. Natural fibers are abundant, recyclable and biodegradable plant derived materials. Besides, thanks to good physical, thermal and mechanical properties, natural fibers become promising alternative for composites. This review includes information about natural fiber reinforced composites’ components, manufacturing methods, mechanical properties and applications.

scholarly journals Performance of lightweight mortar reinforced with doum palm fiber

2020 ◽  
pp. 002199832097519
Author(s):  
Fatma Naiiri ◽  
Allègue Lamis ◽  
Salem Mehdi ◽  
Zitoune Redouane ◽  
Zidi Mondher
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Natural Fiber ◽  
Cement Mortar ◽  
Low Cost ◽  
Natural Fibers ◽  
Construction Materials ◽  
Mechanical And Thermal Properties ◽  
Palm Fiber ◽  
And Control

Natural fibers are increasingly used in composites because of their low cost and good mechanical properties. Cement reinforced with natural fibersis contemplates as a new generation of construction materials with superior mechanical and thermal performance. This study of three sizes’effect of Doum palm fiber explores the mortar’s behavior reinforced with different fiber ratio. The aim is to determine the optimal addition to improve mechanical and thermal properties of natural fiber reinforced cements. Physical, mechanical and thermal properties of composite are examined. Tensile properties of Doum fibers are verified to determine their potential as reinforced material. Findings prove that the use of alkali-treated Doum fiber as reinforcement in cement mortar composite leads to the upgrading of the mechanical properties including thermo-physical properties against composites reinforced with raw fibers and control cement mortars. While, the compression and flexural strength of the cement mortar reinforced with alkali-treated Doum fiber with diameter 0.3 mm (CT3) are metered to be 11.11 MPa, 5.22 MPa, respectively for fiber content 0.5%. Additionally, based on thermo-physical tests, it is assessed that the thermal conductivity and diffusivity decrease for cement mortar reinforced with Doum fiber with diameter 0.2 mm (CT2).

Thermal Shock Effect of Nano-TiO2 Enhanced Glass Fiber Reinforced Polymeric Composites: An Assessment on Tensile and Thermal Behavior

2020 ◽  
Vol 978 ◽  
pp. 277-283
Author(s):  
Kishore Kumar Mahato ◽  
Krishna Chaitanya Nuli ◽  
Krishna Dutta ◽  
Rajesh Kumar Prusty ◽  
Bankim Chandra Ray
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Glass Fiber ◽  
Thermal Shock ◽  
Viscoelastic Behavior ◽  
Stress Transfer ◽  
Tensile Tests ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced ◽  
Service Period

Fiber reinforced polymeric (FRP) composite materials are currently used in numerous structural and materials related applications. But, during their in-service period these composites were exposed to different changing environmental conditions. Present investigation is planned to explore the effect of thermal shock exposure on the mechanical properties of nanoTiO2 enhanced glass fiber reinforced polymeric (GFRP) composites. The samples were conditioned at +70°C temperature for 36 h followed by further conditioning at – 60°C temperature for the similar interval of time. In order to estimate the thermal shock influence on the mechanical properties, tensile tests of the conditioned samples were carried out at 1 mm/min loading rate. The polymer phase i.e. epoxy was modified with different nanoTiO2 content (i.e. 0.1, 0.3 and 0.5 wt. %). The tensile strength of 0.1 wt.% nanoTiO2 GFRP filled composites exhibited higher ultimate tensile strength (UTS) among all other composites. The possible reason may be attributed to the good dispersion of nanoparticles in polymer matrix corresponds to proper stress transfer during thermal shock conditioning. In order to access the variations in the viscoelastic behavior and glass transition temperature due to the addition of nanoTiO2 in GFRP composite and also due to the thermal shock conditioning, dynamic mechanical thermal analysis (DMTA) measurements were carried out. Different modes of failures and strengthening morphology in the composites were analyzed under scanning electron microscope (SEM).

Experimental Investigation on Mechanical Properties of Carbon-Flax-Glass Hybrid Composites

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
M. Dinesh ◽  
R. Asokan ◽  
S. Vignesh ◽  
Chitikena Phani Kumar ◽  
Rajulapati Ravichand
Keyword(s):  
Mechanical Properties ◽  
Thermal Load ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Thermal Exposure ◽  
Stacking Sequence ◽  
Specific Strength ◽  
Hybrid Laminates ◽  
Fiber Materials

Over the years, application of composite materials has got wider. So there is a necessity for development of new materials to satisfy the environmental requirements. It is viable through the process of hybridization of natural fibers to synthetic fibers. This investigation is carried out to determine the tensile and flexural strength of hybrid composites with various fiber combinations and stacking sequence. Thus it is easy to identify the natural fiber hybrid combination with high mechanical properties under static and varying thermal load conditions. The various fiber materials are meticulously chosen and three conventional and six different hybrid laminates were fabricated with various stacking sequences of selected fibers using hand layup technique. The tensile and flexural properties are determined through mechanical testing and compared with conventional materials. The failure morphologies are captured and investigated with zoom optical cameras. On analyzing the results, it is observed that carbon-flax hybrid composites exhibit nearly equivalent specific strength at a reduced cost compared to the carbon/glass fiber hybrid composites and also the effect of the stacking sequence in mechanical properties is elucidated through this study. Varying thermal load analysis reveals that there is a considerable loss in mechanical properties due to thermal exposure.

scholarly journals STUDI PERBANDINGAN SIFAT MEKANIK SERAT BAMBU

2021 ◽  
Vol 5 (2) ◽  
pp. 383
Author(s):  
Gregoria Illya ◽  
Ika Bali
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
High Performance ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Extraction Methods ◽  
Daily Routine ◽  
Compressive Loads ◽  
Bamboo Fibers ◽  
High Flexibility

Natural fibers have application in almost every item used in our daily routine and been contributing explicitly to the economic prosperity and sustainability in our lives. Among the natural fiber plants, bamboo is the most popular, because of its versatile applications and significant contribution to the environment. Bamboo fibers have been used in various application such as decoration, weaving, paper makin, textile, and high-performance composites for the past many years. They have several advantages such as superior tensile strength, low density, and high flexibility under flexible and compressive loads. In order to meet the requirements of each bamboo application, there is a need to study the mechanical properties of bamboo fibers. This study reviews mechanical properties of bamboo fibers for various species, extraction methods, plant age, sizes, and moisture contents.  Keywords: bamboo fiber; bamboo extraction method; mechanical properties; mechanical testing; tensile strength AbstrakIndonesia kaya akan tanaman yang dapat diambil seratnya untuk diolah menjadi produk yang bermanfaat. Di antara tanaman penghasil serat alami, bambu adalah yang paling populer, karena memiliki aplikasi yang serba guna, mudah tumbuh, tidak memerlukan perawatan dan dapat mengurangi pencemaran udara. Serat bambu telah digunakan dalam berbagai aplikasi seperti dekorasi, perabot, tekstil, kertas dan komposit. Beberapa keunggulan serat bambu adalah memiliki kekuatan tarik yang besar, densitas yang rendah dan fleksibilitas yang tinggi. Dalam rangka memenuhi persyaratan masing-masing aplikasi dari serat bambu, diperlukan studi mengenai sifat mekanik serat bambu. Penelitian ini membandingkan beberapa penelitian yang sudah dilakukan mengenai sifat mekanik serat bambu berdasarkan spesies, metode pengolahan dari batang bambu menjadi serat, umur tanaman, ukuran serat dan kadar kelembaban. Serat bambu yang dihasilkan dapat memiliki sifat mekanik yang optimal jika bambu yang dipilih adalah dari spesies tertentu, memiliki kadar kelembaban yang rendah dan menggunakan metode ekstraksi yang tepat.

Sign in / Sign up

Export Citation Format

Share Document