scholarly journals Synthesis and Chemical Functionalization of Pseudo-Homogeneous Catalysts for Biodiesel Production—Oligocat

Polymers ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 19
Author(s):  
Vitor Vlnieska ◽  
Aline S. Muniz ◽  
Angelo R. S. Oliveira ◽  
Maria A. F. César-Oliveira ◽  
Danays Kunka
Keyword(s):  
First Generation ◽  
Preliminary Investigation ◽  
Reaction Medium ◽  
Biodiesel Production ◽  
Solid Catalyst ◽  
Homogeneous Catalyst ◽  
Resonance Spectroscopy ◽  
Chemical Functionalization ◽  
Conversion Rates

With the increase in global demand for biodiesel, first generation feedstock has drawn the attention of governmental institutions due to the correlation with large land farming areas. The second and third feedstock generations are greener feedstock sources, nevertheless, they require different catalytic conditions if compared with first generation feedstock. In this work, we present the synthesis and characterization of oligoesters matrices and their functionalization to act as a pseudo-homogeneous acid catalyst for biodiesel production, named Oligocat. The main advantage of Oligocat is given due to its reactional medium interaction. Initially, oligocat is a solid catalyst soluble in the alcoholic phase, acting as a homogeneous catalyst, providing better mass transfer of the catalytic groups to the reaction medium, and as the course of the reaction happens, Oligocat migrates to the glycerol phase, also providing the advantage of easy separation of the biodiesel. Oligocat was synthesized through polymerization of aromatic hydroxy acids, followed by a chemical functionalization applying the sulfonation technique. Characterization of the catalysts was carried out by infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), and thermogravimetric analysis (TGA). The synthesized oligomers presented 5357 g·mol−1 (Mw) and 3909 g·mol−1 (Mn), with a moderate thermal resistance of approximately 175 °C. By sulfonation reaction, it was possible to obtain a high content of sulphonic groups of nearly 70 mol%, which provided the catalytic activity to the oligomeric matrix. With the mentioned physical–chemical properties, Oligocat is chemically designed to convert second generation feedstock to biodiesel efficiently. Preliminary investigation using Oligocat for biodiesel production resulted in conversion rates higher than 96.5 wt.%.

Acidic Functionalized Nanobohemite: An Active Catalyst for Methyl Ester Production

2019 ◽  
Vol 17 (11) ◽  
Author(s):  
Shokoufe Hosseini ◽  
G. R. Moradi ◽  
Kiumars Bahrami
Keyword(s):  
Active Sites ◽  
Free Acid ◽  
Reaction Medium ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Optimal Point ◽  
Acidic Catalysts ◽  
Boehmite Nanoparticles ◽  
Optimized Conditions

Abstract In the biodiesel production, acidic catalysts are ideally suitable for reacting with different oil sources at various free acid levels. On the other hand, the nanocatalysts can easily be propagated in the reaction medium and provide more accessible active sites for reaction. The aim of this work was to synthesize an acidic nanocatalyst based on boehmite nanoparticles then studying it to biodiesel production from soybean oil. Up to now, no reports were found on biodiesel production by this catalyst. After the synthesis and characterization of the catalyst, using response surface methodology (RSM), the optimized conditions for transesterification were 4.87 wt.% for catalyst dosage, 13:1 for the molar ratio of methanol to oil, 60 °C for reaction temperature, and 3 h for reaction time. At the optimal point, the production yield was 99.8 %. After six consecutive use of the catalyst, the yield dropped slightly (88 %). Consequently, the catalyst can be employed efficiently several runs in the production process.

Synthesis and Characterization of Different Transition Metal-Alginate Based Heterogeneous Catalyst for Esterification Reaction

2016 ◽  
Vol 709 ◽  
pp. 57-60
Author(s):  
Fei Ling Pua ◽  
Kah Thong Looi ◽  
Shamala Gowri Krishnan ◽  
Sharifah Nabihah
Keyword(s):  
Fatty Acids ◽  
Oleic Acid ◽  
Transition Metal ◽  
Free Fatty Acids ◽  
Heterogeneous Catalyst ◽  
Heterogeneous Catalysts ◽  
Biodiesel Production ◽  
Esterification Reaction ◽  
Homogeneous Catalyst

In recent years, attention has been drawn to produce heterogeneous catalyst to replace homogeneous catalyst in biodiesel industry. This study was focused on the synthesis of three different types of alginate based heterogeneous catalyst (Ferric-alginate, Copper-alginate, and Nickel alginate) and the effect of the catalyst on esterification of oleic acid. Morphology and elemental analysis was conducted to investigate the properties of the catalyst. The new heterogeneous catalysts were used to catalyze the esterification of oleic acid at reaction temperature of 60°C and 2 hours reaction time. Fe-alginate has achieved the highest free fatty acids (FFAs) conversation rate of 82.03%. The results and findings proved that transition metal-alginate heterogeneous catalyst has the potential and ability to esterify the free fatty acids prior biodiesel production from high free fatty acids feedstock.

Heterogenization of a homogenous catalyst: synthesis and characterization of imidazolium ionene/OH−@SiO2 as an efficient basic catalyst for biodiesel production

2018 ◽  
Vol 42 (1) ◽  
pp. 67-75 ◽  
Author(s):  
Neda Sammah ◽  
Mehran Ghiaci
Keyword(s):  
Biodiesel Production ◽  
Synthesis And Characterization ◽  
Homogeneous Catalyst ◽  
Basic Catalyst ◽  
Catalyst Synthesis ◽  
Homogenous Catalyst

This study provides a new route for heterogenization of a homogeneous catalyst. The catalyst applied for at least 5 cycles.

scholarly journals Oligocat: Oligoesters as Pseudo-Homogenous Catalysts for Biodiesel Synthesis

Polymers ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 210
Author(s):  
Vitor Vlnieska ◽  
Aline Silva Muniz ◽  
Angelo Roberto dos Santos Oliveira ◽  
Maria Aparecida Ferreira César-Oliveira ◽  
Danays Kunka
Keyword(s):  
Conversion Rate ◽  
First Generation ◽  
Second Generation ◽  
Reaction Medium ◽  
Acid Catalyst ◽  
Biodiesel Production ◽  
European Federation ◽  
Alkyl Esters ◽  
Production Chain ◽  
Biodiesel Synthesis

Biodiesel production from first-generation feedstock has shown a strong correlation with the increase in deforestation and the necessity of larger areas for land farming. Recent estimation from the European Federation for Transport and Environment evidenced that since the 2000s decade, an area equal to the Netherlands was deforested to supply global biodiesel demand, mainly originating from first-generation feedstock. Nevertheless, biodiesel is renewable, and it can be a greener source of energy than petroleum. A promising approach to make biodiesel independent from large areas of farming is to shift as much as possible the biodiesel production chain to second and third generations of feedstock. The second generation presents three main advantages, where it does not compete with the food industry, its commercial value is negligible, or none, and its usage as feedstock for biodiesel production reduces the overall waste disposal. In this manuscript, we present an oligomeric catalyst designed to be multi-functional for second-generation feedstock transesterification reactions, mainly focusing our efforts to optimize the conversion of tallow fat and sauteing oil to FAME and FAEE, applying our innovative catalyst. Named as Oligocat, our catalyst acts as a Brønsted-Lowry acid catalyst, providing protons to the reaction medium, and at the same time, with the course of the reaction, it sequesters glycerol molecules from the medium and changes its physical phase during the transesterification reaction. With this set of properties, Oligocat presents a pseudo-homogenous behavior, reducing the purification and separation steps of the biodiesel process production. Reaction conditions were optimized applying a 42 factorial planning. The output parameter evaluated was the conversion rate of triacylglycerol to mono alkyl esters, measured through gel permeation chromatography (GPC). After the optimization studies, a conversion yield of 96.7 (±1.9) wt% was achieved, which allows classifying the obtained mono alkyl esters as biodiesel by ASTM D6751 or EN 14214:2003. After applying the catalyst in three reaction cycles, Oligocat still presented a conversion rate above 96.5 wt% and as well an excellent recovery rate.

scholarly journals Synthesis and Characterization of 5-Hydroxymethylfurfural from Corncob Using Solid Sulfonated Carbon Catalyst

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Moges Admasie Mengstie ◽  
Nigus Gabbiye Habtu
Keyword(s):  
Elemental Analysis ◽  
Solid Acid ◽  
Reaction Medium ◽  
Solid Catalyst ◽  
Carbon Catalyst ◽  
Total Acid ◽  
Solid Catalysts ◽  
High Sulfur Content ◽  
Reaction Result

5-Hydroxymethylfurfural as a versatile organic compound is considered as a promising biomass-derived product via hydrolysis followed by dehydration of lignocellulosic biomass using solid catalysts. In this study, lignocellulosic materials (corncob) were utilized to synthesize 5-hydroxymethylfurfural via solid acid catalytic conversion. The precursor of the catalyst material was chemically impregnated with ZnCl2 prior to carbonization. The solid catalyst was prepared with three different acid concentrations of 98%, 96%, and 94% of sulfuric acid. The prepared catalyst was characterized by acid density elemental analysis, FTIR, XRD, and SEM. The maximum result of the total acid density and amount of SO3H group was recorded as 3.5 mmol/g and 0.61 mmol/g, respectively, with high sulfur content of 1.87%. The result from FTIR spectra of BC-SO3H−1 confirms the incorporation of -SO3H groups into the carbon material. BC-SO3H−1 was selected based on the acid density and elemental analysis of the catalyst. The activity of the selected catalyst (BC-SO3H−1) was studied on the transformation of corncob to 5-hydroxymethylfurfural using biphasic solvent (water: ethyl acetate) and NaCl in the reaction medium. The intermediate result in the hydrolysis\dehydration reaction was analyzed using FTIR and the functional groups observed confirm the occurrence of 5-HMF in the intermediate reaction result.

scholarly journals Sintesis dan Karakterisasi Abu Kulit Alpukat sebagai Katalis Proses Transesterifikasi Minyak Goreng Bekas menjadi Biodiesel

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Azif Afandi ◽  
Lindia Riani ◽  
Yanna Syamsuddin ◽  
Zuhra Zuhra
Keyword(s):  
Palmitic Acid ◽  
Calcination Temperature ◽  
Heterogeneous Catalysts ◽  
Active Phase ◽  
Acid Number ◽  
Transesterification Reaction ◽  
Biodiesel Production ◽  
Homogeneous Catalyst ◽  
Waste Biomass

Biodiesel is synthesized through a transesterification reaction with the help of a catalyst and generally uses a homogeneous catalyst. Heterogeneous catalysts can be synthesized from waste biomass such as avocado peel through a calcination. The purpose of this study was to examine the effect of variations in calcination temperature (550, 650, and 750oC) on the performance of the catalyst for biodiesel production and to analyze the effect of differences in the amount of catalyst (4, 6, 8, and 10% by weight of oil) used in the transesterification process on biodiesel yield. The catalysts were characterized by XRD, SEM-EDX, and FTIR. The results of the characterization of the catalyst showed that the dominant active phase of the catalyst was potassium (K). The highest biodiesel yield was obtained when using avocado peel ash as a catalyst which was calcined at a temperature of 650oC and using 6% catalyst by weight of oil. In the transesterification reaction the composition of the biodiesel product was analyzed using GC-MS and resulted that the palmitic acid was the most abundant composition in biodiesel. The biodiesel products produced were characterized for its density, viscosity, and acid number and have met the standard of SNI 7182:2015.

Production of Biodiesel from Palm Stearin Using Solid Catalyst Assisted with Co-Solvent

2018 ◽  
Vol 876 ◽  
pp. 9-14 ◽  
Author(s):  
Weerasak Songoen ◽  
Vittaya Punsuvon ◽  
Wallop Arirop ◽  
Athitan Timyamprasert
Keyword(s):  
Calcium Oxide ◽  
Palm Stearin ◽  
Biodiesel Production ◽  
Proton Nuclear Magnetic Resonance ◽  
Solid Catalyst ◽  
Resonance Spectroscopy ◽  
Oxide Content ◽  
Optimum Conditions ◽  
Quick Lime ◽  
High Calcium

Calcium methoxide obtained from quick lime is used as a solid catalyst in the transesterification reaction between palm stearin with methanol using tetrahydrofuran (THF) as co-solvent for biodiesel production. In this work, quick lime was used to prepare calcium oxide by heat treatment at the different temperatures, after that calcium oxide was further reacted with methanol to produce calcium methoxide catalyst. The properties of Calcium methoxide (Ca(OCH3)2) was characterized by XRD, SEM, BET, TGA, EDX and FTIR. The optimum conditions of biodiesel production were studied through response surface methodology and central composite design. The conversion of fatty acid methyl ester (FAME) was determined by proton nuclear magnetic resonance spectroscopy (1H-NMR). The results depicted that calcined quick lime at 800 °C for 3 h contained high calcium oxide content. The Ca(OCH3)2 catalyst prepared at 65 °C for 3 h gave high surface area and catalytic activity. The optimum conditions for biodiesel production were 2.33% w/w of catalyst, 1 : 9.39 of palm stearin to methanol molar ratio, 102 min of reaction time and 9.07% v/v based on methanol of THF co-solvent, the same condition gave 98.23% of FAME conversion.

Mango (Magnifera indica) seed oil grown in Dilla town as potential raw material for biodiesel production using NaOH- a homogeneous catalyst

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Diesel Engine ◽  
Physicochemical Properties ◽  
Seed Oil ◽  
Methyl Esters ◽  
Pollution Prevention ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Homogeneous Catalyst ◽  
Minimal Amount

Biodiesel produced by transesterification process from vegetable oils or animal fats is viewed as a promising renewable energy source. Now a day’s diminishing of petroleum reserves in the ground and increasing environmental pollution prevention and regulations have made searching for renewable oxygenated energy sources from biomasses. Biodiesel is non-toxic, renewable, biodegradable, environmentally benign, energy efficient and diesel substituent fuel used in diesel engine which contributes minimal amount of global warming gases such as CO, CO2, SO2, NOX, unburned hydrocarbons, and particulate matters. The chemical composition of the biodiesel was examined by help of GC-MS and five fatty acid methyl esters such as methyl palmitate, methyl stearate, methyl oleate, methyl linoleate and methyl linoleneate were identified. The variables that affect the amount of biodiesel such as methanol/oil molar ratio, mass weight of catalyst and temperature were studied. In addition to this the physicochemical properties of the biodiesel such as (density, kinematic viscosity, iodine value high heating value, flash point, acidic value, saponification value, carbon residue, peroxide value and ester content) were determined and its corresponding values were 87 Kg/m3, 5.63 Mm2/s, 39.56 g I/100g oil, 42.22 MJ/Kg, 132oC, 0.12 mgKOH/g, 209.72 mgKOH/g, 0.04%wt, 12.63 meq/kg, and 92.67 wt% respectively. The results of the present study showed that all physicochemical properties lie within the ASTM and EN biodiesel standards. Therefore, mango seed oil methyl ester could be used as an alternative to diesel engine.

Sign in / Sign up

Export Citation Format

Share Document