scholarly journals The Impact of Operating Parameters on the Gas-Phase Sulfur Concentration after High Temperature Sulfur Sorption on a Supported Mo-Mn Sorbent

Reactions ◽  
2021 ◽  
Vol 2 (4) ◽  
pp. 365-373
Author(s):  
Jianyu Ma ◽  
Mehdi Mahmoodinia ◽  
Kumar R. Rout ◽  
Edd A. Blekkan
Keyword(s):  
Adverse Effect ◽  
High Temperature ◽  
Gas Phase ◽  
Sulfur Removal ◽  
Space Velocity ◽  
Operating Parameters ◽  
Sulfur Concentration ◽  
Residual Concentration ◽  
Steam Content ◽  
The Impact

The impact of operating parameters on H2S capture from a syngas mixture by a Mo-promoted Mn-based high-temperature sorbent was investigated. The parameters investigated included temperature, space velocity, H2S concentration in the feed gas, and steam content. The H2S and SO2 concentrations in the gas after passing over a bed of the sorbent were analyzed and compared with thermodynamic calculations. The results confirmed that low temperature, low space velocity, low H2S concentration, and a dry feed were favorable for achieving a low residual concentration of sulfur compounds in the effluent gas. The sorbent was able to reduce the residual H2S concentration to below 1 ppm under all tested conditions. However, the unavoidable steam content in the gas phase had a significant adverse effect on sulfur removal from the gas. An empirical model, containing the three variables, i.e., temperature, space velocity, and H2S concentration in the feed, was developed and can be used to predict the effluent H2S residual concentration after treatment by the 15Mn8Mo sorbent.

Manganese and ceria sorbents for high temperature sulfur removal from biomass-derived syngas – The impact of steam on capacity and sorption mode

Fuel ◽  
2012 ◽  
Vol 97 ◽  
pp. 612-620 ◽  
Author(s):  
Singfoong Cheah ◽  
Yves O. Parent ◽  
Whitney S. Jablonski ◽  
Todd Vinzant ◽  
Jessica L. Olstad
Keyword(s):  
High Temperature ◽  
Sulfur Removal ◽  
The Impact

scholarly journals Association between over-chlorinated drinking water and suckling, nursery and fattening pig death losses

2011 ◽  
Vol 56 (No. 7) ◽  
pp. 358-361
Author(s):  
A. Tofant ◽  
M. Ostovic ◽  
S. Wolf ◽  
A. Ekert Kabalin ◽  
Z. Pavicic ◽  
...  
Keyword(s):  
Adverse Effect ◽  
Drinking Water ◽  
Data Analysis ◽  
Free Chlorine ◽  
Residual Concentration ◽  
Pig Production ◽  
Chlorine Residual ◽  
Chlorinated Drinking Water ◽  
The Impact ◽  
Fattening Pigs

Following our report on reproductive failure in gilts and sows caused by drinking over-chlorinated water at a pig-breeding farm, the present study investigated the impact of water over-chlorination on the different pig production categories on the farm. Pigs were given over-chlorinated water with a free chlorine residual concentration of 2.11 mg/l for seven days, from the onset of mechanical failure of the chlorinator dispenser connected to the water supplying system until its detection. Data analysis revealed that the adverse effect of over-chlorinated drinking water manifested as an increase in the percentage of death losses in suckling, nursery and fattening pigs (all P < 0.01).

A NEW WELDING MATERIAL FOR REGENERATION IN THE WELDING TECHNOLOGY BASED ON NICKEL. ANALYSIS OF THE COMPOSITION AND PROPERTIES OF DEFORMABLE HEAT-RESISTANT HIGH-CHROMIUM NICKEL-BASED ALLOYS FOR WELDED PARTS. ANALYSIS OF EXISTING FUELLING STATIONS TYPES AND VEHICLES USING HYDROGEN, HYDROGEN PRODUCTION AND STORING METHODS

2019 ◽  
pp. 43-48
Author(s):  
Ben Nengjun ◽  
Zhou Pengfei ◽  
Oleksandr Labartkava ◽  
Mykhailo Samokhin
Keyword(s):  
Rare Earth ◽  
High Temperature ◽  
Nickel Alloys ◽  
Total Content ◽  
Operating Conditions ◽  
High Temperature Strength ◽  
High Chromium ◽  
Salt Corrosion ◽  
Tcp Phases ◽  
The Impact

This work involves an analysis of high-chromium high-temperature deformable wieldable nickel alloys for use in GTE repair assemblies. It is shown that the alloys EP868 (VZh98) and Haynes 230 can be used in welded assemblies with an operating temperature of 800-1100 °C. The alloys Nimonic 81, Nimonic 91, IN 935, IN 939, and Nicrotan 2100 GT also have a high potential for use in welded assemblies. They are characterized by a combination of good weldability, high-temperature strength, and resistance to scaling. There have been conducted studies on high-temperature salt corrosion of model nickel alloys. They allowed establishing the patterns of the impact of base metal alloying with chromium, aluminum, titanium, cobalt, tungsten, molybdenum, niobium, tantalum and rare earth metals on the critical temperature of the start of salt corrosion Tcor and the alloy mass loss. It has been established that alloys with a moderate concentration (13-16%) of chromium can possess satisfactory hightemperature corrosion resistance (HTC resistance) under the operating conditions of ship GTE. The HTC resistance of CrAl-Ti alloys improves upon reaching the ratio Ti/Al ˃ 1. Meanwhile, the ratio Ti/Al ˂ 1 promotes the formation of corrosion products with low protective properties. The positive effect of tantalum on the HTC resistance of alloys is manifested at higher test temperatures than that of titanium, and the total content of molybdenum and tungsten in alloys is limited by the condition 8Mo2 – 2W2 = 89. The presence of refractory elements stabilizes the strengthening phase and prevents formation of the ɳ-phase. However, their excess promotes formation of the embrittling topologically close packed (TCP) phases and boundary carbides of an unfavorable morphology. Based on the studies of the HTC resistance, there has been identified a class of model high-temperature corrosionresistant nickel alloys with a moderate or high chromium content (30%), Ti/Al ˃ 1, and a balanced content of refractory and rare-earth elements.

scholarly journals Temperature, Disease, and Death in London: Analyzing Weekly Data for the Century from 1866 to 1965

2021 ◽  
pp. 1-41
Author(s):  
W. Walker Hanlon ◽  
Casper Worm Hansen ◽  
Jake Kantor
Keyword(s):  
Nineteenth Century ◽  
High Temperature ◽  
Mortality Data ◽  
Late Nineteenth Century ◽  
Infant Deaths ◽  
Digestive Diseases ◽  
Late Nineteenth ◽  
The Impact ◽  
The City

Using novel weekly mortality data for London spanning 1866-1965, we analyze the changing relationship between temperature and mortality as the city developed. Our main results show that warm weeks led to elevated mortality in the late nineteenth century, mainly due to infant deaths from digestive diseases. However, this pattern largely disappeared after WWI as infant digestive diseases became less prevalent. The resulting change in the temperature-mortality relationship meant that thousands of heat-related deaths—equal to 0.9-1.4 percent of all deaths— were averted. These findings show that improving the disease environment can dramatically alter the impact of high temperature on mortality.

scholarly journals The modification effect of temperature on the relationship between air pollutants and daily incidence of influenza in Ningbo, China

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Rui Zhang ◽  
Yujie Meng ◽  
Hejia Song ◽  
Ran Niu ◽  
Yu Wang ◽  
...  
Keyword(s):  
Air Pollution ◽  
High Temperature ◽  
Air Pollutants ◽  
Meteorological Data ◽  
Effect Of Temperature ◽  
Distributed Lag ◽  
Modification Effect ◽  
Incidence Risk ◽  
The Impact ◽  
The Relationship

Abstract Background Although exposure to air pollution has been linked to many health issues, few studies have quantified the modification effect of temperature on the relationship between air pollutants and daily incidence of influenza in Ningbo, China. Methods The data of daily incidence of influenza and the relevant meteorological data and air pollution data in Ningbo from 2014 to 2017 were retrieved. Low, medium and high temperature layers were stratified by the daily mean temperature with 25th and 75th percentiles. The potential modification effect of temperature on the relationship between air pollutants and daily incidence of influenza in Ningbo was investigated through analyzing the effects of air pollutants stratified by temperature stratum using distributed lag non-linear model (DLNM). Stratified analysis by sex and age were also conducted. Results Overall, a 10 μg/m3 increment of O3, PM2.5, PM10 and NO2 could increase the incidence risk of influenza with the cumulative relative risk of 1.028 (95% CI 1.007, 1.050), 1.061 (95% CI 1.004, 1.122), 1.043 (95% CI 1.003, 1.085), and 1.118 (95% CI 1.028, 1.216), respectively. Male and aged 7–17 years were more sensitive to air pollutants. Through the temperature stratification analysis, we found that temperature could modify the impacts of air pollution on daily incidence of influenza with high temperature exacerbating the impact of air pollutants. At high temperature layer, male and the groups aged 0–6 years and 18–64 years were more sensitive to air pollution. Conclusion Temperature modified the relationship between air pollution and daily incidence of influenza and high temperature would exacerbate the effects of air pollutants in Ningbo.

The Impact of the Aqueous Phase Chemistry of HNO4 on Gas Phase Tropospheric Chemistry

2001 ◽  
Vol 32 ◽  
pp. 269-270
Author(s):  
J.E. WILLIAMS ◽  
F.J. DENTENER ◽  
A.R. van den BERG
Keyword(s):  
Gas Phase ◽  
Aqueous Phase ◽  
Tropospheric Chemistry ◽  
Phase Chemistry ◽  
The Impact

Investigating the influence of carbon nanotube on the performance of asphalt binder

2021 ◽  
pp. 147776062110194
Author(s):  
Peerzada Mosir Shah ◽  
Mohammad Shafi Mir
Keyword(s):  
High Temperature ◽  
Asphalt Binder ◽  
Storage Condition ◽  
Modified Bitumen ◽  
Creep And Recovery ◽  
Low Viscosity ◽  
Temperature Performance ◽  
Modified Asphalt Binder ◽  
Viscosity Grade ◽  
The Impact

The purpose of this study aims at investigating the impact of multi-walled carbon nanotubes (MWCNT’s) on the properties of low viscosity grade asphalt binder. Asphalt binder with viscosity grade-10 is selected as the control binder and later it is modified with different percentages of MWCNT’s (0.5–2.5%). Penetration, softening point, ductility and rotational viscosity test were employed for evaluating the effect of MWCNT’s on basic physical properties of modified asphalt binder. Dynamic Shear Rheometer (DSR) is used for evaluating the rheological properties of the base and modified bitumen, for both aged and unaged bitumen. Based on the conventional and basic rheological tests, it was seen that the addition of MWCNT’s improved the high-temperature performance of modified bitumen. Multiple Stress Creep and Recovery (MSCR) test results revealed that the addition of MWCNT’s improved the creep and recovery of modified binders for both stress intensities (0.1 kPa and 3.2 kPa) which confirms that the modified binder is more rut resistant. Moreover, it was observed that there was a significant improvement in the aging resistance of the asphalt binder due to addition of MWCNTs. However low temperature performance of MWCNTs was not encouraging. Also, MWCNTs addition to asphalt binder was found to be stable under high-temperature storage condition. Overall, there is a significant amount of improvement using MWCNTs in the base asphalt binder.

Sign in / Sign up

Export Citation Format

Share Document