scholarly journals Sequential Sampling and Estimation of Approximately Bandlimited Graph Signals

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1460
Author(s):  
Sijie Lin ◽  
Ke Xu ◽  
Hui Feng ◽  
Bo Hu

Graph signal sampling has been widely studied in recent years, but the accurate signal models required by most of the existing sampling methods are usually unavailable prior to any observations made in a practical environment. In this paper, a sequential sampling and estimation algorithm is proposed for approximately bandlimited graph signals, in the absence of prior knowledge concerning signal properties. We approach the problem from a Bayesian perspective in which we formulate the signal prior by a multivariate Gaussian distribution with unknown hyperparameters. To overcome the interconnected problems associated with the parameter estimation, in the proposed algorithm, hyperparameter estimation and sample selection are performed in an alternating way. At each step, the unknown hyperparameters are updated by an expectation maximization procedure based on historical observations, and then the next node in the sampling operation is chosen by uncertainty sampling with the latest hyperparameters. We prove that under some specific conditions, signal estimation in the proposed algorithm is consistent. Subsequent validation of the approach through simulations shows that the proposed procedure yields performances which are significantly better than existing state-of-the-art approaches notwithstanding the additional attribute of robustness in the presence of a broad range of signal attributes.

2019 ◽  
Vol 25 (1) ◽  
pp. 44-58 ◽  
Author(s):  
Edgar A. Terekhin ◽  
Tatiana N. Smekalova

Abstract The near chora (agricultural land) of Tauric Chersonesos was investigated using multiyear remote sensing data and field surveys. The boundaries of the land plots were studied with GIS (Geographic Information Systems) technology and an analysis of satellite images. Reliable reconstruction of the borders has been done for 231 plots (from a total of about 380), which is approximately 53% of the Chersonesean chora. During the last 50 years, most of the ancient land plots have been destroyed by modern buildings, roads, or forests. However, in the 1960s, a significant part of the chora was still preserved. Changes in preservation with time were studied with the aid of satellite images that were made in 1966 and 2015. During that period, it was found that the number of plots with almost-complete preservation decreased from 47 to 0. Those land plots whose preservation was better than 50% dropped from 104 to 4. A temporal map shows this decline in preservation. It was found that the areas of land plots could be determined accurately with satellite images; compared to field surveys, this accuracy was about 99%.


2002 ◽  
Vol os9 (1) ◽  
pp. 9-13 ◽  
Author(s):  
Raman Bedi ◽  
Jackie A Champion ◽  
Roger Davies

Introduction In order to promote training and education in special-needs dentistry an attempt was made to introduce problem-based learning (PBL) as a method of postgraduate dental education. The aim of this paper was to review the principles of PBL and report on a case study using this methodology. Method The case study was of a PBL session, on the subject of ‘problems of obtaining appropriate dental care for people with epilepsy’, undertaken at a national conference. Delegates were asked to complete a pre- and post-session questionnaire on PBL and their attitudes to the session. Results The session received a mixed response. Only 33 (35%) thought the session was valuable and only 20 (31%) thought it was better than conventional teaching methods and yet over half (55%) said they would like to attend more PBL in special-needs dentistry. Professionals complementary to dentistry were more likely to find the PBL session of value and to prefer the method to a more conventional format than dentists were (chi-square=5.5, df=1, p<0.05 and chi-square=5.9, df=1, p<0.05 respectively). Conclusion Valuable feedback was received from delegates. This will enable improvements to be made in future courses so that the effectiveness of PBL can be optimised.


1964 ◽  
Vol 42 (12) ◽  
pp. 1605-1613 ◽  
Author(s):  
R. J. Moore ◽  
G. A. Mulligan

A third 5-year survey made in 1962 of Carduus acanthoides, C. nutans, and their hybrids in Grey Co., Ontario, revealed that a great decrease in these populations had occurred. C. acanthoides and hybrids similar to this species had survived better than C. nutans but very little spread of either species seemed to have occurred in 1957–1962. In experimental plots the hybrid has been made and backcrossed to the parental species. The species differ in chromosome number (C. acanthoides, 2n = 22; C. nutans, 2n = 16) and hybrids have intermediate numbers. Evidence was found from field and experimental studies that the progeny of the F1 hybrid included a greater proportion of seedlings with the higher chromosome numbers than with the lower and intermediate numbers. It is suggested that this selection may operate through the rejection of the longer chromosomes received from C. nutans, which, in certain zygotic combinations may constitute an excess of chromatin lethal to the zygote.


Perception ◽  
10.1068/p6320 ◽  
2009 ◽  
Vol 38 (4) ◽  
pp. 613-616 ◽  
Author(s):  
Russell Reid ◽  
Anna Brooks ◽  
Duncan Blair ◽  
Rick van der Zwan

Johansson (1973 Perception & Psychophysics14 201–211) suggested that point-light displays that are static—so-called ‘snapshots’—contain little or no information about the actor or their action. Here we present data that suggest even naive observers can perceive such information from static point-light arrays. Observers were able, at rates better than chance, to discriminate the directions of facing of sagittally viewed static point-light walkers. The data show also that, without feedback, performances improved with experience. Our data have implications for assumptions made in designing experiments with point-light displays and for models of the neural mechanisms mediating biological motion perceptions.


The abundant availability of demolition waste from construction industry is leading towards a significant problem of disposal, land and air pollution. The natural aggregate resources are also depleting due to development of construction activities. An attempt is made in this study to convert this waste into wealth by substituting the recycled brick from demolition waste to granite aggregate in production of the concrete. The granite aggregate (GA) is replaced with recycled brick aggregate (RBA) by 25% of its weight to produce M15 and M20 grades of concrete. The granite aggregate concrete (GAC) and recycled brick aggregate concrete (RBAC) were subjected to different temperatures between 100 to 1000oC for a duration of 3 hours and the mechanical properties such as compressive strength and flexural strength were examined to assess its fire performance. The response of RBAC is better than GAC at each temperature. The study revealed that the residual strength increases with the increase in grade of concrete at all temperatures.


2020 ◽  
Vol 2 (1) ◽  
pp. 13-18
Author(s):  
Slamet Raharjo ◽  
Massus Subekti ◽  
Imam Arif Raharjo

This research aimed to find out the work method of flash stamp machine made in Tiongkok brand Flaz and flash stamp machine made in Indonesia brand MD observed from each machine performance including colour stamp quality resulted, duration in its operation, as well as power and electricity consumption. The research method adopted is qualitative method with grounded theory approach. This research conducted in Enterprise of Flash Stamp Machine made in Indonesia brand MD on Jl. Lembang Baru I West Sudimara, Ciledug, Tangerang, Banten. The result drawn from work method research of both flash stamp machine are: First,   the stamp quality resulted by flash stamp machine brand MD was better than flash stamp machine brand MD. Second, the operation time of flash stamp machine brand MD was 4 second faster, that is 3 second, while flash sta mp machine brand Flaz was 4 second. Third, the electricity power consumption of flash stamp machine brand Flaz was smaller that is 136,62 watt, while brand Flaz was 392,34 watt. Fourth, the electrical energy consumption of flash stamp machine Flaz was smaller that is 888,39 Joule, while flash stamp machine brand MD was 1709,06. The conclusion drawn from work method research of flash stamp machine made in Tiongkok brand Flaz toward flash stamp machine made in Indonesia brand MD measured from stamp output quality parameter and operation time speed, so flash stamp machine made in Indonesia brand MD is better than flash stamp machine made in Tiongkok brand Flaz. Abstrak Penelitian ini bertujuan untuk mengetahui unjuk kerja mesin stempel flash made in Tiongkok merek Flaz terhadap mesin stempel flash made in Indonesia merek MD dilihat dari performa masing-masing mesin meliputi kualitas cap stempel warna yang dihasilkannya, lama waktu pengoperasiannya, pemakaian daya serta konsumsi energi listriknya. Metode penelitian yang di gunakan adalah metode kualitatif dengan pendekatan penelitian grounded theory. Penelitian ini dilakukan di Perusahaan Pembuatan Mesin Stempel Flash made In Indonesia merek MD di Jl. Lembang Baru I Kelurahan Sudimara Barat, Ciledug, Tangerang, Banten. Hasil yang diperoleh dari penelitian unjuk kerja kedua mesin stempel flash ini adalah :  Pertama, kualitas cap stempel yang dihasilkan mesin stempel flash merek MD lebih bagus dibandingkan mesin stempel flash merek Flaz. Kedua, lama waktu operasinya 4 detik lebih cepat mesin stempel flash merek MD yaitu selama 3 detik dan 4 detik untuk mesin stempel flash merek Flaz. Ketiga, daya listrik yang dibutuhkan lebih kecil me sin stempel flash merek Flaz yaitu sebesar 136,62 watt dan 392,34 Watt untuk merek Flaz. Keempat, konsumsi energi listrik yang dibutuhkan lebih kecil mesin stempel merek Flaz yaitu 888,39 Joule dan 1709,06 Joule untuk mesin stempel flash merek MD. Kesimpulan yang diperoleh dari penelitian unjuk kerja mesin stempel flash made in Tiongkok merek Flaz terhadap mesin stempel flash made in Indonesia merek MD diukur dari parameter kualitas hasil cap dan kecepatan waktu operasi maka mesin stempel flash made in Indonesia merek MD lebih bagus dari pada mesin stempel flash made in Tiongkok merek Flaz.


Res Publica ◽  
1970 ◽  
Vol 12 (3) ◽  
pp. 311-338
Author(s):  
Wilfried Dewachter ◽  
Edith Lismont

Municipal elections are not the only channel of participation in the municipal policy nor are they the only participation-problem. But it is nevertheless useful to make research into them because they are the unique institutionalized possibility of participation.This participation-research deals with the different aspects of the municipal elections.The first thing to note is that a number of council-members are pointed out by elections without competition. This phenomenon is not very extended: 373 out of some 2,600 municipalities, 12 % of the council members, 200,000 voters. There is no notable change of size since 1920 in this phenomenon.Compared to the legislative elections, candidatures are very stable and limited : an average of 2,3 candidates per seat. These limited candidatures also mean that in practically half of the cases municipal elections have a two-parties system, by which the electoral corps chose directly the Court of Mayor and Aldermen. But even in municipalities with more than two parties, this «direct choice of the government» is made in 75 % of the cases. In respect of these facts, participation is qualitatively much better than in the case of the parliamentary elections.Forsaking of choice is notably lower at municipal than at parliamentary elections. As to the use of preference-votes, the choice of the municipal electorate is richer than that of the national electorate not only because municipal electors more aften express their preference for individuals, but also and not in the least because, by this more frequent use of preference-votes, they have real participation in the choice of the councilmembers themselves.The possibilities of choice at municipal elections offer an original alternative : to vote beyond party-frontiers with the «mixed vote».  This multi-party vote is but seldom used : by 2,5 % of the electorate.And even then those who tlus mixed way lose half of their votingcapacity.  Generally seen however, the municipal elections show a more favorable participation-pattern than the legislative ones. This leads to the question if it can be imputed to the voters when something is wrong with municipal politics. Is this problem not-situated on a higher level of the participation-pyramid ?


Author(s):  
Muneer Buckley ◽  
Zbigniew Michalewicz ◽  
Ralf Zurbruegg

There is a great need for accurate predictions of foreign exchange rates. Many industries participate in foreign exchange scenarios with little idea where the exchange rate is moving, and what the optimum decision to make at any given time is. Although current economic models do exist for this purpose, improvements could be made in both their flexibility and adaptability. This provides much room for models that do not suffer from such constraints. This chapter proposes the use of a genetic program (GP) to predict future foreign exchange rates. The GP is an extension of the DyFor GP tailored for forecasting in dynamic environments. The GP is tested on the Australian / US (AUD/USD) exchange rate and compared against a basic economic model. The results show that the system has potential in forecasting long term values, and may do so better than established models. Further improvements are also suggested.


Author(s):  
Peter Baldwin

Americans Are Patriotic And Nationalist, but not more than some Europeans (figure 173). Unsurprisingly, Germans are least proud of their nation, and rather unexpectedly and cheerily, the Portuguese—not the Americans—are most proud, with the Irish tied for second place. A 2007 survey reveals that a larger proportion of Italians consider their culture superior than any other nationalities surveyed, including the Americans. Another survey finds that only the Irish feel more uniformly proud to be of their nation. Proportionately more Austrians, Irish, French, and Danes claim they feel very close to their nation than do Americans. Americans are more likely than any Europeans to think that their country is better than most others. But proportionately more Portuguese, Danes, and Spaniards feel that the world would be improved if other people were like them. And any U.S. tendency to boosterism is tempered by the finding that a larger fraction of Americans admits that certain aspects of their country shame them than do the Germans, Austrians, Spanish, French, Danes, or Finns. No country more robustly projects its own nationalist aspirations in the products it sells abroad than the supposedly postnational Swedes. Swedish manufacturers, or at least their advertising agencies, seem convinced that the sheer fact of being Swedish is a selling point. Ikea’s walls are adorned with musings on the preternaturally close relationship between Swedes and nature that allegedly sets them apart from the rest of humanity, as are packets of Wasa crispbread. Asko’s slogan, “Made In Sweden,” is festooned prominently on its products. Though it does not necessarily inspire confidence that the company’s dishwashers are better than the competition, it certainly makes clear Asko’s national origins. Absolut Vodka’s tag—in uncharacteristically unidiomatic English—“Country of Sweden,” does much the same. Saab hawks its cars as “Born from Jets,” an unsubtle allusion to the company’s standing as a pillar of the Swedish military-industrial complex.


2011 ◽  
Vol 3 (1) ◽  
pp. 1
Author(s):  
Camillo Porta

In the past few years, impressing improvements have been made in the treatment of advanced colorectal cancer. Following decades of modest achievements, in which it was just a matter of dose and schedule for 5-FU and leucovorin—the only treatment then available—first, the development of irinotecan and oxaliplatin, and then the use of the two biologicals, bevacizumab and cetuximab, have dramatically improved the life expectancy of our colorectal cancer patients...


Sign in / Sign up

Export Citation Format

Share Document