scholarly journals Optimal Performance and Modeling of Wireless Technology Enabling Smart Electric Metering Systems Including Microgrids

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7208
Author(s):  
Carlos Suárez ◽  
Esteban Inga
Keyword(s):  
Wireless Network ◽  
Optimal Routing ◽  
Wireless Technology ◽  
Model Configuration ◽  
The World ◽  
Energy Metering ◽  
Network Topologies ◽  
Micro Grids

This work is focused on the performance analysis and optimal routing of wireless technology for intelligent energy metering, considering the inclusion of micro grids. For the study, a geo-referenced scenario has been taken into account, which will form the structure of a graph to be solved using heuristic-based algorithms. In the first instance, the candidate site of the world geography to perform the case study is established, followed by deploying infrastructure devices and determining variables and parameters. Then, the model configuration is programmed, taking into account that a set of nodes and vertices is established for proper routing, resulting in a preliminary wireless network topology. Finally, from a set of restrictions, a determination of users connected to the concentrator and optimal routing is performed. This procedure is treated as a coverage set problem. Consequently, to establish the network parameters, two restrictions are specifically considered, capacity and range; thus, can be determined the best technology to adapt to the location. Finally, a verification of the resulting network topologies and the performance of the infrastructure is done by simulating the wireless network. With the model created, scenarios are tested, and it is verified that the optimization model demonstrates its effectiveness.

scholarly journals A Critical View on Pension Savings in Slovakia

2021 ◽  
Vol 101 (4) ◽  
pp. 370-382
Author(s):  
Jana Špirková ◽  
Martin Dobrovič ◽  
Miroslava Vinczeová
Keyword(s):  
Pension System ◽  
Investment Fund ◽  
Monthly Basis ◽  
Critical View ◽  
Pension Systems ◽  
Administrative Costs ◽  
The World ◽  
Almost All

In almost all countries around the world, pension systems are based on several pillars. This is also the case of Slovakia with its three-pillar pension system. The paper presents a case study underlying the risks that can seriously affect the amount of future pensions. The case study clearly indicates that current pensions in Slovakia paid under all three pillars do not correspond with the expectations from the implementation of the three-pillar pension system. The aim of the paper is to the risks that can seriously affect the amount of future pensions. Our own contribution is the determination of the amount of pension for a specific pensioner specified in the presented case study. Within the saving phase of pension contributions the development of investment fund returns, the amount of future pensioner´s contributions, as well as administrative costs are analyzed on a monthly basis. The payout phase is modelled using actuarial functions applying the mortality tables of Slovakia.

Mathematical Solution for the Determination of Optimal Warehouse Location and Optimal Distribution Route

2005 ◽  
Author(s):  
Jagannadha Rao Naraparaju ◽  
Raghunandan A. Karamcheti ◽  
Z. Y. Wang
Keyword(s):  
Mathematical Models ◽  
Optimal Location ◽  
Optimal Routing ◽  
Practical Case ◽  
Transport Costs ◽  
Numerical Examples ◽  
Warehouse Location ◽  
Transportation Distance

In this paper, a procedure to determine the optimal location of a distribution warehouse, from which products are sent out to a group of companies has been studied. The goal was to minimize annual transportation distance between the warehouse and the customers. Fundamentals of mathematics have been used to formulate a virtual map showing the location of the present customers. Mathematical models and equations were developed making certain assumptions and an optimal location for the warehouse has been determined. Various factors that are involved in relocating the warehouse have been considered. Also a solution is given for the optimal location of a satellite or an auxiliary warehouse in addition to the existing one. A case study has been conducted on the model with the help of various numerical examples. Based on the optimal location of the relocated warehouse and the satellite warehouse obtained, the reductions in the transport costs were estimated. Once the optimal warehouse location has been found out, the next step was to find out an optimal route (least travel distance) for a practical case in which several companies have to be supplied with necessary products from one warehouse in a single trip. For this purpose, mathematical models were created and optimal routing algorithms were developed. Case studies have been conducted with the help of numerical examples. High amounts of savings in terms of travel distances, costs and time could be observed by the implementation of these algorithms.

scholarly journals International Law and the Legitimate Determination of Risk: Is Democratising Expertise the Answer?

2007 ◽  
Vol 38 (2) ◽  
pp. 363
Author(s):  
Jacqueline Peel
Keyword(s):  
Risk Assessment ◽  
Decision Making ◽  
International Law ◽  
Global Level ◽  
The World ◽  
World Standard ◽  
Public Perspectives ◽  
Risk Decision

As technological risks become a matter of increasing concern around the world, standard science-based approaches for risk assessment are coming under increasing pressure to be responsive not only to expert views, but also broader public perspectives on risks and concerns over possible uncertainties.  International fora in which national risk regulations are reviewed for their scientific adequacy, such as WTO dispute processes under the SPS Agreement, have become the focus for debates over whether such processes allow adequate scope for “democratic” risk concerns as well as scientific views.  This article assesses the scope for democratising expertise in international risk determination, using reforms suggested in the context of WTO SPS disputes as a case study. It contends that the institutional ramifications for international law of “democratising expertise” are far from clear, especially given the obstacles encountered in establishing democratic procedures for transparency and participation at the global level.  This is not a reason to abandon efforts for greater democratisation of supranational risk determination but points to the need for more nuanced approaches for balancing scientific and political concerns in risk decision-making in order to ensure outcomes which are broadly acceptable.

Culture and the plasticity of perception

2020 ◽  
Vol 43 ◽  
Author(s):  
Michael Lifshitz ◽  
T. M. Luhrmann
Keyword(s):  
Cultural Context ◽  
Sensory Experience ◽  
Cultural Learning ◽  
The World

Abstract Culture shapes our basic sensory experience of the world. This is particularly striking in the study of religion and psychosis, where we and others have shown that cultural context determines both the structure and content of hallucination-like events. The cultural shaping of hallucinations may provide a rich case-study for linking cultural learning with emerging prediction-based models of perception.

HIPEREMESIS GRAVIDARUM PADA IBU HAMIL DI KLINIK BIDAN SUPRIYATI SRIBIT BERBAH SLEMAN

2019 ◽  
Vol 14 (1) ◽  
pp. 51
Author(s):  
Pramukti Dian Setianingrum ◽  
Farah Irmania Tsani
Keyword(s):  
Blood Pressure ◽  
Pregnant Women ◽  
Hyperemesis Gravidarum ◽  
Unwanted Pregnancy ◽  
The Body ◽  
Nausea And Vomiting ◽  
Daily Activities ◽  
World Health ◽  
The World

Backgroud: The World Health Organization (WHO) explained that the number of Hyperemesis Gravidarum cases reached 12.5% of the total number of pregnancies in the world and the results of the Demographic Survey conducted in 2007, stated that 26% of women with live births experienced complications. The results of the observations conducted at the Midwife Supriyati Clinic found that pregnant women with hyperemesis gravidarum, with a comparison of 10 pregnant women who examined their contents there were about 4 pregnant women who complained of excessive nausea and vomiting. Objective: to determine the hyperemesis Gravidarum of pregnant mother in clinic. Methods: This study used Qualitative research methods by using a case study approach (Case Study.) Result: The description of excessive nausea of vomiting in women with Hipermemsis Gravidarum is continuous nausea and vomiting more than 10 times in one day, no appetite or vomiting when fed, the body feels weak, blood pressure decreases until the body weight decreases and interferes with daily activities days The factors that influence the occurrence of Hyperemesis Gravidarum are Hormonal, Diet, Unwanted Pregnancy, and psychology, primigravida does not affect the occurrence of Hyperemesis Gravidarum. Conclusion: Mothers who experience Hyperemesis Gravidarum feel nausea vomiting continuously more than 10 times in one day, no appetite or vomiting when fed, the body feels weak, blood pressure decreases until the weight decreases and interferes with daily activities, it is because there are several factors, namely, hormonal actors, diet, unwanted pregnancy, and psychology.

A novel method for the determination of linting propensity of paper

TAPPI Journal ◽  
2012 ◽  
Vol 11 (10) ◽  
pp. 9-17
Author(s):  
ALESSANDRA GERLI ◽  
LEENDERT C. EIGENBROOD
Keyword(s):  
Ash Content ◽  
The Novel ◽  
Offset Printing ◽  
Excellent Correlation ◽  
End Conditions ◽  
Bottom Side ◽  
Novel Method ◽  
Total Fraction

A novel method was developed for the determination of linting propensity of paper based on printing with an IGT printability tester and image analysis of the printed strips. On average, the total fraction of the surface removed as lint during printing is 0.01%-0.1%. This value is lower than those reported in most laboratory printing tests, and more representative of commercial offset printing applications. Newsprint paper produced on a roll/blade former machine was evaluated for linting propensity using the novel method and also printed on a commercial coldset offset press. Laboratory and commercial printing results matched well, showing that linting was higher for the bottom side of paper than for the top side, and that linting could be reduced on both sides by application of a dry-strength additive. In a second case study, varying wet-end conditions were used on a hybrid former machine to produce four paper reels, with the goal of matching the low linting propensity of the paper produced on a machine with gap former configuration. We found that the retention program, by improving fiber fines retention, substantially reduced the linting propensity of the paper produced on the hybrid former machine. The papers were also printed on a commercial coldset offset press. An excellent correlation was found between the total lint area removed from the bottom side of the paper samples during laboratory printing and lint collected on halftone areas of the first upper printing unit after 45000 copies. Finally, the method was applied to determine the linting propensity of highly filled supercalendered paper produced on a hybrid former machine. In this case, the linting propensity of the bottom side of paper correlated with its ash content.

Social Design for Services Framework

2018 ◽  
Vol 1 (1) ◽  
Author(s):  
Melanie SARANTOU ◽  
Satu MIETTINEN
Keyword(s):  
South Africa ◽  
Sustainable Development ◽  
Research Group ◽  
Design Research ◽  
Service Design ◽  
Social Design ◽  
Practical Action ◽  
The Social ◽  
The World

This paper addresses the fields of social and service design in development contexts, practice-based and constructive design research. A framework for social design for services will be explored through the survey of existing literature, specifically by drawing on eight doctoral theses that were produced by the World Design research group. The work of World Design researcher-designers was guided by a strong ethos of social and service design for development in marginalised communities. The paper also draws on a case study in Namibia and South Africa titled ‘My Dream World’. This case study presents a good example of how the social design for services framework functions in practice during experimentation and research in the field. The social design for services framework transfers the World Design group’s research results into practical action, providing a tool for the facilitation of design and research processes for sustainable development in marginal contexts.

Drowning in negativism, self-hate, doubt, madness: Linguistic insights into Sylvia Plath’s experience of depression

2015 ◽  
Vol 11 (1) ◽  
pp. 41-54 ◽  
Author(s):  
Zsófia Demjén
Keyword(s):  
Lived Experience ◽  
Medical Humanities ◽  
Sylvia Plath ◽  
Individual Experience ◽  
Qualitative And Quantitative ◽  
The World ◽  
The Individual ◽  
Linguistic Methods ◽  
Linguistic Approach

This paper demonstrates how a range of linguistic methods can be harnessed in pursuit of a deeper understanding of the ‘lived experience’ of psychological disorders. It argues that such methods should be applied more in medical contexts, especially in medical humanities. Key extracts from The Unabridged Journals of Sylvia Plath are examined, as a case study of the experience of depression. Combinations of qualitative and quantitative linguistic methods, and inter- and intra-textual comparisons are used to consider distinctive patterns in the use of metaphor, personal pronouns and (the semantics of) verbs, as well as other relevant aspects of language. Qualitative techniques provide in-depth insights, while quantitative corpus methods make the analyses more robust and ensure the breadth necessary to gain insights into the individual experience. Depression emerges as a highly complex and sometimes potentially contradictory experience for Plath, involving both a sense of apathy and inner turmoil. It involves a sense of a split self, trapped in a state that one cannot overcome, and intense self-focus, a turning in on oneself and a view of the world that is both more negative and more polarized than the norm. It is argued that a linguistic approach is useful beyond this specific case.

Sign in / Sign up

Export Citation Format

Share Document