scholarly journals Refractive Index-Based Terahertz Sensor Using Graphene for Material Characterization

Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 8151
Author(s):  
Aruna Veeraselvam ◽  
Gulam Nabi Alsath Mohammed ◽  
Kirubaveni Savarimuthu ◽  
Jaume Anguera ◽  
Jessica Constance Paul ◽  
...  
Keyword(s):  
Refractive Index ◽  
Material Characterization ◽  
Unit Cell ◽  
Sensor Performance ◽  
Sensing Applications ◽  
Peak Absorption ◽  
Dielectric Loading ◽  
Peak Sensitivity ◽  
Index Unit ◽  
Thz Sensor

In this paper, a graphene-based THz metamaterial has been designed and characterized for use in sensing various refractive index profiles. The proposed single-band THz sensor was constructed using a graphene-metal hybridized periodic metamaterial wherein the unit cell had a footprint of 1.395λeff × 1.395λeff and resonated at 4.4754 THz. The realized peak absorption was 98.88% at 4.4754 THz. The sensitivity of the proposed metamaterial sensor was estimated using the absorption characteristics of the unit cell. The performance of the sensor was analyzed under two different categories, viz. the random dielectric loading and chemical analytes, based on the refractive index. The proposed THz sensor offered a peak sensitivity of 22.75 GHz/Refractive Index Unit (RIU) for the various sample loadings. In addition, the effect of the sample thickness on the sensor performance was analyzed and the results were presented. From the results, it can be inferred that the proposed metamaterial THz sensor that was based on a refractive index is suitable for THz sensing applications.

scholarly journals Highly compact refractive index sensor based on stripe waveguides for lab-on-a-chip sensing applications

2016 ◽  
Vol 7 ◽  
pp. 751-757 ◽  
Author(s):  
Chamanei Perera ◽  
Kristy Vernon ◽  
Elliot Cheng ◽  
Juna Sathian ◽  
Esa Jaatinen ◽  
...  
Keyword(s):  
Refractive Index ◽  
Linear Response ◽  
Lab On A Chip ◽  
Refractive Index Sensor ◽  
Label Free ◽  
Output Intensity ◽  
Sensing Applications ◽  
Index Analysis ◽  
Highly Sensitive ◽  
Index Unit

In this paper we report the design and experimental realisation of a novel refractive index sensor based on coupling between three nanoscale stripe waveguides. The sensor is highly compact and designed to operate at a single wavelength. We demonstrate that the sensor exhibits linear response with a resolution of 6 × 10−4 RIU (refractive index unit) for a change in relative output intensity of 1%. Authors expect that the outcome of this paper will prove beneficial in highly compact, label-free and highly sensitive refractive index analysis.

Garnets from the Eilat area, southern Israel

1965 ◽  
Vol 35 (270) ◽  
pp. 386-392 ◽  
Author(s):  
Y. Nathan ◽  
A. Katz ◽  
M. Eyal
Keyword(s):  
Refractive Index ◽  
Unit Cell ◽  
Chemical Analyses ◽  
Cell Edge ◽  
Refractive Index Unit ◽  
Index Unit

SummaryGarnets from twenty-eight pegmatites, schists, and gneisses from the crystalline massif of Eilat have been examined. Refractive index, unit-cell edge, MnO and FeO content were determined in 19 samples. Three chemical analyses are given. The garnets fall into two distinct groups, the pegmatite garnets (spessartine-rich, almandine to spessartine) and metamorphic garnets (nearly pure almandine). Garnets occurring in pegmatite-like granitoid veins cutting through the schists are shown to belong to the second (metamorphic) group. The pegmatite garnets again fall into two groups of different spessartine content.

scholarly journals Sensitivity-Enhanced SPR Sensor Based on Graphene and Subwavelength Silver Gratings

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2125
Author(s):  
Lu Kong ◽  
Jiangtao Lv ◽  
Qiongchan Gu ◽  
Yu Ying ◽  
Xiaoxiao Jiang ◽  
...  
Keyword(s):  
Refractive Index ◽  
Structural Parameters ◽  
Geometrical Parameters ◽  
Graphene Layers ◽  
Spr Sensor ◽  
Sensing Applications ◽  
Subwavelength Gratings ◽  
Resonance Angle ◽  
Index Unit ◽  
Sensing Performance

A novel surface plasmon resonance (SPR) sensor with graphene and subwavelength gratings is proposed to improve the sensing performance. A series of numerical analyses were performed to investigate the effect of structural parameters on the sensing performance, such as minimum reflectance at resonance (MRR), full width at half maximum (FWHM), and resonance angle. The results indicated that near-zero MRR (2.9 × 10−6) and narrow FWHM (about 3.5 deg) could be obtained by optimizing the geometrical parameters. Moreover, the influence of the number of graphene layers on sensitivity was also studied. The maximum sensitivity of the designed sensor could reach 192 deg/refractive index unit (RIU), which is a great enhancement compared to the silver-only SPR sensor. In addition, ethylene glycol solutions with different refractive indices were detected. The results showed that the sensitivity of the sensor could reach 220.67 deg/RIU, and the proposed sensor had excellent linearity between the resonance angle and refractive index, enabling extensive potential practical sensing applications.

scholarly journals Realization of frequency hopping characteristics of an epsilon negative metamaterial with high effective medium ratio for multiband microwave applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohammad Tariqul Islam ◽  
Md. Moniruzzaman ◽  
Touhidul Alam ◽  
Md Samsuzzaman ◽  
Qutaiba A. Razouqi ◽  
...  
Keyword(s):  
Refractive Index ◽  
Low Cost ◽  
Frequency Hopping ◽  
Small Dimension ◽  
Effective Medium ◽  
Unit Cell ◽  
Negative Permittivity ◽  
Design System ◽  
Microwave Applications ◽  
Meander Line

AbstractIn this paper, a meander-lines-based epsilon negative (ENG) metamaterial (MTM) with a high effective medium ratio (EMR) and near-zero refractive index (NZI) is designed and investigated for multiband microwave applications. The metamaterial unit cell is a modification of the conventional square split-ring resonator in which the meander line concept is utilized. The meander line helps to increase the electrical length of the rings and provides strong multiple resonances within a small dimension. The unit cell of proposed MTM is initiated on a low-cost FR4 substrate of 1.5 mm thick and electrical dimension of 0.06λ × 0.06λ, where wavelength, λ is calculated at the lowest resonance frequency (2.48 GHz). The MTM provides four major resonances of transmission coefficient (S21) at 2.48, 4.28, 9.36, and 13.7 GHz covering S, C, X, and Ku bands. It shows negative permittivity, near-zero permeability, and near-zero refractive index in the vicinity of these resonances. The equivalent circuit is designed and modeled in Advanced Design System (ADS) software. The simulated S21 of the MTM unit cell is compared with the measured one and both show close similarity. The array performance of the MTM is also evaluated by using 2 × 2, 4 × 4, and 8 × 8 arrays that show close resemblance with the unit cell. The MTM offers a high effective medium ratio (EMR) of 15.1, indicating the design's compactness. The frequency hopping characteristics of the proposed MTM is investigated by open and short-circuited the three outer rings split gaps by using three switches. Eight different combinations of the switching states provide eight different sets of multiband resonances within 2–18 GHz; those give the flexibility of using the proposed MTM operating in various frequency bands. For its small dimension, NZI, high EMR, and frequency hopping characteristics through switching, this metamaterial can be utilized for multiband microwave applications, especially to enhance the gain of multiband antennas.

scholarly journals Perfect Absorption and Refractive-Index Sensing by Metasurfaces Composed of Cross-Shaped Hole Arrays in Metal Substrate

Nanomaterials ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 63
Author(s):  
Zhendong Yan ◽  
Chaojun Tang ◽  
Guohua Wu ◽  
Yumei Tang ◽  
Ping Gu ◽  
...  
Keyword(s):  
Refractive Index ◽  
High Performance ◽  
Narrow Band ◽  
Label Free ◽  
Hybrid Mode ◽  
Perfect Absorption ◽  
Refractive Index Sensing ◽  
Sensing Applications ◽  
Silver Substrate ◽  
Hole Arrays

Achieving perfect electromagnetic wave absorption with a sub-nanometer bandwidth is challenging, which, however, is desired for high-performance refractive-index sensing. In this work, we theoretically study metasurfaces for sensing applications based on an ultra-narrow band perfect absorption in the infrared region, whose full width at half maximum (FWHM) is only 1.74 nm. The studied metasurfaces are composed of a periodic array of cross-shaped holes in a silver substrate. The ultra-narrow band perfect absorption is related to a hybrid mode, whose physical mechanism is revealed by using a coupling model of two oscillators. The hybrid mode results from the strong coupling between the magnetic resonances in individual cross-shaped holes and the surface plasmon polaritons on the top surface of the silver substrate. Two conventional parameters, sensitivity (S) and figure of merit (FOM), are used to estimate the sensing performance, which are 1317 nm/RIU and 756, respectively. Such high-performance parameters suggest great potential for the application of label-free biosensing.

scholarly journals Hybrid Grating in Reduced-Diameter Fiber for Temperature-Calibrated High-Sensitivity Refractive Index Sensing

2019 ◽  
Vol 9 (9) ◽  
pp. 1923
Author(s):  
Biqiang Jiang ◽  
Zhen Hao ◽  
Dingyi Feng ◽  
Kaiming Zhou ◽  
Lin Zhang ◽  
...  
Keyword(s):  
Refractive Index ◽  
Simultaneous Measurement ◽  
Surrounding Medium ◽  
High Sensitivity ◽  
Fiber Grating ◽  
Bragg Resonance ◽  
Core Mode ◽  
Promising Alternative ◽  
Sensing Applications ◽  
Highly Sensitive

We propose and experimentally demonstrate a hybrid grating, in which an excessively tilted fiber grating (Ex-TFG) and a fiber Bragg grating (FBG) were co-inscribed in a reduced-diameter fiber (RDF). The hybrid grating showed strong resonances due to coupling among core mode and a set of polarization-dependent cladding modes. This coupling showed enhanced evanescent fields by the reduced cladding size, thus allowing stronger interaction with the surrounding medium. Moreover, the FBG’s Bragg resonance confined by the thick cladding was exempt from the change of the surrounding medium’s refractive index (RI), and then the FBG can work as a temperature compensator. As a result, the Ex-TFG in RDF promised a highly sensitive RI measurement, with a sensitivity up to ~1224 nm/RIU near the RI of 1.38. Through simultaneous measurement of temperature and RI, the temperature dependence of water’s RI is then determined. Therefore, the proposed hybrid grating with a spectrum of multi-peaks embedded with a sharp Bragg resonance is a promising alternative for the simultaneous measurement of multi-parameters for many RI-based sensing applications.

scholarly journals Reusable TiN Substrate for Surface Plasmon Resonance Heterodyne Phase Interrogation Sensor

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1325 ◽  
Author(s):  
Ru-Jing Sun ◽  
Hung Ji Huang ◽  
Chien-Nan Hsiao ◽  
Yu-Wei Lin ◽  
Bo-Huei Liao ◽  
...  
Keyword(s):  
Refractive Index ◽  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
High Sensitivity ◽  
Nanorod Array ◽  
Glass Substrates ◽  
Sensing Applications ◽  
Bulk Charge ◽  
Phase Interrogation

A TiN-based substrate with high reusability presented high-sensitivity refractive index measurements in a home-built surface plasmon resonance (SPR) heterodyne phase interrogation system. TiN layers with and without additional inclined-deposited TiN (i-TiN) layers on glass substrates reached high bulk charge carrier densities of 1.28 × 1022 and 1.91 × 1022 cm−3, respectively. The additional 1.4 nm i-TiN layer of the nanorod array presented a detection limit of 6.1 × 10−7 RIU and was higher than that of the 46 nm TiN layer at 1.2 × 10−6 RIU when measuring the refractive index of a glucose solution. Furthermore, the long-term durability of the TiN-based substrate demonstrated by multiple processing experiments presented a high potential for various practical sensing applications.

scholarly journals Tuning the Fano Resonance Between Localized and Propagating Surface Plasmon Resonances for Refractive Index Sensing Applications

Plasmonics ◽  
2013 ◽  
Vol 8 (3) ◽  
pp. 1379-1385 ◽  
Author(s):  
Kristof Lodewijks ◽  
Jef Ryken ◽  
Willem Van Roy ◽  
Gustaaf Borghs ◽  
Liesbet Lagae ◽  
...  
Keyword(s):  
Refractive Index ◽  
Surface Plasmon ◽  
Fano Resonance ◽  
Surface Plasmon Resonances ◽  
Refractive Index Sensing ◽  
Sensing Applications ◽  
Plasmon Resonances

Strain, torsion and refractive index sensors based on helical long period fibre grating inscribed in small-core fibre for structural condition monitoring

2021 ◽  
Vol 24 (6) ◽  
pp. 1248-1255
Author(s):  
Cailing Fu ◽  
Yi-Qing Ni ◽  
Tong Sun ◽  
Yiping Wang ◽  
Siqi Ding ◽  
...  
Keyword(s):  
Refractive Index ◽  
High Sensitivity ◽  
Single Mode ◽  
Structural Condition ◽  
Core Diameter ◽  
Small Core ◽  
Long Period ◽  
Sensing Applications ◽  
Core Fibre ◽  
Refractive Index Sensors

This study is intended to develop long period fibre grating sensors for potential applications in environmental and durability monitoring of coastal structures. High-quality helical long period fibre gratings (HLPFGs) are inscribed in different types of small-core single mode fibre (SMF) by use of hydrogen-oxygen flame heating technique. A detailed investigation of the effect of core diameter on their transmission spectrum and optimum length of the HLPFG has been pursued. A longer length is required to achieve the same coupling attenuation in a smaller-core SMF than that of a larger-core fibre. The strain, torsion and refractive index (RI) properties of the HLPFG is investigated experimentally to develop a high-sensitivity sensor. The experimental results show that the strain sensitivity could be enhanced by means of employing a larger-core diameter SMF. Moreover, the HLFPGs are also sensitive to the torsion and external RI. Hence, such HLFPGs have great potential for sensing applications.

scholarly journals Simultaneous Measurement of Refractive Index and Flow Rate Using a Co2+-Doped Microfiber

2021 ◽  
Vol 11 (22) ◽  
pp. 10525
Author(s):  
Da Liu ◽  
Ran Gao ◽  
Zhipei Li ◽  
Anle Qi
Keyword(s):  
Refractive Index ◽  
Flow Rate ◽  
Core Mode ◽  
Measurement Sensitivity ◽  
Resonant Modes ◽  
Cladding Mode ◽  
Bragg Grating Sensor ◽  
Maximum Measurement ◽  
Index Unit ◽  
Surrounding Liquid

This paper has proposed and experimentally demonstrated an integrated Co2+-doped microfiber Bragg grating sensor (Co-MFBGS) that can measure the surrounding liquid refractive index (LRI) and liquid flow rate (LFR) simultaneously. The Co-MFBGS provides well-defined resonant modes of core and cladding in the reflection spectrum. By monitoring the wavelength of the cladding mode, the LRI can be measured; meanwhile, by monitoring the wavelength of the core mode caused by the heat exchange, the LFR can be measured. The LRI and LFR can be distinguished by the wavelength separation between cladding mode and core mode. The experimental results show that in aqueous glycerin solution, the maximum measurement sensitivity for LRI detection is −7.85 nm/RIU (refractive index unit), and the LFR sensitivity is −1.93 nm/(μL/s) at a flow rate of 0.21 μL/s.

Sign in / Sign up

Export Citation Format

Share Document