scholarly journals Influence of Rice Straw Fibers on Concrete Strength and Drying Shrinkage

2018 ◽  
Vol 10 (7) ◽  
pp. 2445 ◽  
Author(s):  
Feraidon Ataie

Fibers have been used in construction materials for centuries. This study investigated the impact of the addition of rice straw fibers (RSF) on the compressive and flexural strengths of concrete, drying shrinkage, and on the heat of cement hydration. RSF was saturated before being added to concrete. Addition of RSF in concrete reduced concrete strength, increased concrete drying shrinkage, and increased the induction period of cement hydration. It was suggested that water squeezed out of RSF during mixing and sample consolidation increased effective water-to-cement ratios (w/c) and resulted in reduction of concrete strength and increase of concrete drying shrinkage. The increase of retardation time was attributed to leaching of organic and inorganic compounds out of RSF into the pore solution. It was shown that samples containing washed RSF did not have noticeable improvement in compressive strength over samples containing unwashed (as received) RSF. However, samples containing washed RSF had lower drying shrinkage and shorter induction period compared to those containing unwashed RSF.

Author(s):  
Lily N Edwards-Callaway ◽  
M Caitlin Cramer ◽  
Caitlin N Cadaret ◽  
Elizabeth J Bigler ◽  
Terry E Engle ◽  
...  

ABSTRACT Shade is a mechanism to reduce heat load providing cattle with an environment supportive of their welfare needs. Although heat stress has been extensively reviewed, researched, and addressed in dairy production systems, it has not been investigated in the same manner in the beef cattle supply chain. Like all animals, beef cattle are susceptible to heat stress if they are unable to dissipate heat during times of elevated ambient temperatures. There are many factors that impact heat stress susceptibility in beef cattle throughout the different supply chain sectors, many of which relate to the production system, i.e. availability of shade, microclimate of environment, and nutrition management. The results from studies evaluating the effects of shade on production and welfare are difficult to compare due to variation in structural design, construction materials used, height, shape, and area of shade provided. Additionally, depending on operation location, shade may or may not be beneficial during all times of the year, which can influence the decision to make shade a permanent part of management systems. Shade has been shown to lessen the physiologic response of cattle to heat stress. Shaded cattle exhibit lower respiration rates, body temperatures, and panting scores compared to un-shaded cattle in weather that increases the risk of heat stress. Results from studies investigating the provision of shade indicate that cattle seek shade in hot weather. The impact of shade on behavioral patterns is inconsistent in the current body of research, some studies indicating shade provision impacts behavior and other studies reporting no difference between shaded and un-shaded groups. Analysis of performance and carcass characteristics across feedlot studies demonstrated that shaded cattle had increased ADG, improved feed efficiency, HCW, and dressing percentage when compared to cattle without shade. Despite the documented benefits of shade, current industry statistics, although severely limited in scope, indicate low shade implementation rates in feedlots and data in other supply chain sectors do not exist. Industry guidelines and third party on-farm certification programs articulate the critical need for protection from extreme weather but are not consistent in providing specific recommendations and requirements. Future efforts should include: updated economic analyses of cost versus benefit of shade implementation, exploration of producer perspectives and needs relative to shade, consideration of shade impacts in the cow-calf and slaughter plant segments of the supply chain, and integration of indicators of affective (mental) state and preference in research studies to enhance the holistic assessment of cattle welfare.


Author(s):  
Dawei Wan ◽  
Wenqin Zhang ◽  
Yong Tao ◽  
Zonghua Wan ◽  
Fazhou Wang ◽  
...  

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 82
Author(s):  
Salmabanu Luhar ◽  
Demetris Nicolaides ◽  
Ismail Luhar

Even though, an innovative inorganic family of geopolymer concretes are eye-catching potential building materials, it is quite essential to comprehend the fire and thermal resistance of these structural materials at a very high temperature and also when experiencing fire with a view to make certain not only the safety and security of lives and properties but also to establish them as more sustainable edifice materials for future. The experimental and field observations of degree of cracking, spalling and loss of strength within the geopolymer concretes subsequent to exposure at elevated temperature and incidences of occurrences of disastrous fires extend an indication of their resistance against such severely catastrophic conditions. The impact of heat and fire on mechanical attributes viz., mechanical-compressive strength, flexural behavior, elastic modulus; durability—thermal shrinkage; chemical stability; the impact of thermal creep on compressive strength; and microstructure properties—XRD, FTIR, NMR, SEM as well as physico-chemical modifications of geopolymer composites subsequent to their exposures at elevated temperatures is reviewed in depth. The present scientific state-of-the-art review manuscript aimed to assess the fire and thermal resistance of geopolymer concrete along with its thermo-chemistry at a towering temperature in order to introduce this novel, most modern, user and eco-benign construction materials as potentially promising, sustainable, durable, thermal and fire-resistant building materials promoting their optimal and apposite applications for construction and infrastructure industries.


Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 699
Author(s):  
Xiaoxiao Zhang ◽  
Leo Pel ◽  
Florent Gauvin ◽  
David Smeulders

Due to the requirement for developing more sustainable constructions, natural fibers from agricultural wastes, such as coir fibers, have been increasingly used as an alternative in concrete composites. However, the influence of coir fibers on the hydration and shrinkage of cement-based materials is not clear. In addition, limited information about the reinforcing mechanisms of coir fibers in concrete can be found. The goal of this research is to investigate the effects of coir fibers on the hydration reaction, microstructure, shrinkages, and mechanical properties of cement-based light-weight aggregate concrete (LWAC). Treatments on coir fibers, namely Ca(OH)2 and nano-silica impregnation, are applied to further improve LWAC. Results show that leachates from fibers acting as a delayed accelerator promote cement hydration, and entrained water by fibers facilitates cement hydration during the whole process. The drying shrinkage of LWAC is increased by adding fibers, while the autogenous shrinkage decreases. The strength and toughness of LWAC are enhanced with fibers. Finally, three reinforcement mechanisms of coir fibers in cement composites are discussed.


2021 ◽  
Vol 11 (5) ◽  
pp. 548-556
Author(s):  
Shubhada Nayak ◽  
Madhuri Sahasrabuddhe ◽  
Sharad Kale

Anaerobic digestion is among the essential biological techniques used for stabilization of organic sludge from sewage and highly concentrated efflu-ents from food processing industries. It also recycles the municipal solid wastes into compost with simultaneous production of methane. The current study was performed to estimate the biomethanation potential of various agro- and industrial wastes like Jatropha de-oil cake, prawn shells, chicken feathers, bagasse, rice straw and wheat husk by mimicking the conditions in the biphasic Nisargruna biogas plant. A small volume of samples was chemi-cally characterized and allowed to decompose under aerobic and anaerobic conditions to determine the effect of aerobic predigestion (i.e. phase 1 of Nisargruna plant) on final methane production. The biogas produced was quantified by downward displacement of water. The observations indicated that approximately 60-80% methane was produced when Jatropha de-oil cake, prawn shells and rice straw was used. Conversely, the wheat straw and sugarcane wastes showed less methane formation, which may be due to the presence of complex polymers like lignocellulose and silica that considerably reduces the metabolic potential of microorganisms.


2008 ◽  
Vol 56 (2) ◽  
pp. 169-178
Author(s):  
U. Sangakkara ◽  
S. Nissanka ◽  
P. Stamp

Smallholders in the tropics add different organic materials to their crops at different times, based on the availability of materials and labour. However, the time of application could have an effect on the establishment and early growth of crops, especially their root systems, which has not yet been clearly identified. This paper presents the results of a study conducted under greenhouse conditions using soils from a field treated with three organic materials at 4 or 2 weeks before or at the planting of maize seeds, corresponding to the times that tropical smallholders apply these materials. The organic materials used were leaves of Gliricidia sepium and Tithonia diversifolia or rice straw, incorporated at a rate equivalent to 6 Mt ha −1 . A control treatment where no organic matter was added was used for comparison. The impact of the treatments on soil properties at the planting of maize seed and detailed root analysis based on root lengths were carried out until the last growth stage (V4). The addition of organic matter improved the soil characteristics, and the impact of adding Gliricidia leaves was most pronounced when incorporated 2 weeks before planting. The benefits of leaves of Tithonia or rice straw on soil quality parameters were clearly evident when added 4 weeks before planting. Organic matter enhanced the root number, root length, root growth rate and branching indices. All the organic materials suppressed the growth of maize roots when applied at planting, suggesting the existence of allelopathic effects, which could result in poor growth. The most benefits in terms of root growth were observed with Tithonia .


2015 ◽  
Vol 752-753 ◽  
pp. 758-762 ◽  
Author(s):  
Rak Hyun Kim ◽  
Sung Ho Tae ◽  
Chang U Chae ◽  
Ji Hoon Kim

The purpose of this study was to develop an environmental database for construction finish materials organized by building element as part of an effort to develop an environmental effect assessment program for buildings. To this end, a classification system has been developed for building elements that satisfies the demands from construction project stakeholders to acquire environmental information. Furthermore, among the construction materials, an environmental database of the finish materials has been developed for each building element based on reference substances and the impact indexes of six environmental effect categories of the national LCI DB.


2019 ◽  
Vol 3 ◽  
pp. 140-149 ◽  
Author(s):  
Alexis Simons ◽  
Alexandra Bertron ◽  
Christophe Roux ◽  
Aurélie Laborel-Préneron ◽  
Jean-Emmanuel Aubert ◽  
...  

The impact of building materials on the environment and the health of occupants is nowadays a priority issue. Ecological construction materials such as earthen materials are currently experiencing a regain of interest due to both ecological and economic factors. The microbial proliferation on indoor materials can induce a deterioration of the building air quality and lead to an increase of health risks for the occupants. The issue of indoor air quality raises questions about the use of earthen building materials and their possible susceptibility to fungal development. The microflora of earthen materials and their ability to grow on such support are indeed poorly studied. This study focused on the quantification of both bacterial and fungal microflora along the manufacturing process. The impact of extreme humidity, simulating a hydric accident, on microflora development was analyzed on the surface and inside earthen bricks. The initial microflora of these materials was dramatically reduced during the manufacturing process, especially after heat treatment for drying. Proliferation of remaining microorganisms was only observed under high humidity condition, in particular for earthen materials with vegetal aggregates. Moreover, in situ samplings were performed on naturally dried earthen materials used in buildings. The characterization of the microbial density revealed a higher microbial density than on manufactured specimens, while microbial concentration and detected taxa seemed mainly related to the room use and building history. These results provide a better understanding of microbial proliferation on these materials.


2020 ◽  
Vol 63 (2) ◽  
pp. 43-62
Author(s):  
Gui Li ◽  
Marianne Tange Hasholt ◽  
Ole Mejlhede Jensen

AbstractAir-entraining agents (AEA) are normally used to improve the frost resistance of concrete. However, it is not possible to accurately control the air void system in concrete with AEA. Thus, a significant loss of concrete strength is caused by over-dosing voids, and this increases the environmental impact from concrete structures. Superabsorbent polymer (SAP) can also be used to produce frost-resistant concrete. Compared to AEA, it can be used to precisely engineer the air void structure of concrete, promote cement hydration, and mitigate self-desiccation cracks. In this study, life cycle assessment methodology is applied to evaluate the overall environmental impact of frost-resistant concrete based on AEA and SAP, respectively. The results illustrate that frost-resistant concrete with SAP has a lower environmental impact than frost-resistant concrete with AEA if the strength and durability of concrete are considered in the defined functional unit. In addition, frost-resistant concrete with SAP reduces the environmental burdens of the vertical elements such as columns, but it increases the environmental load of the horizontal elements such as slabs, where the strength increase cannot be utilized. Moreover, the inventory data for AEA and SAP can affect the impact assessment results.


Sign in / Sign up

Export Citation Format

Share Document