scholarly journals Life Cycle Assessment for Bioethanol Production from Oil Palm Frond Juice in an Oil Palm Based Biorefinery

2019 ◽  
Vol 11 (24) ◽  
pp. 6928 ◽  
Author(s):  
Siti Jamilah Hanim Mohd YUSOF ◽  
Ahmad Muhaimin Roslan ◽  
Khairul Nadiah Ibrahim ◽  
Sharifah Soplah Syed ABDULLAH ◽  
Mohd Rafein Zakaria ◽  
...  

A study was conducted to estimate the possible environmental impacts arising from the generation of bioethanol from oil palm frond sugar juice in a theoretical oil palm based biorefinery model. A life cycle assessment (LCA) with the gate-to-gate approach was performed with the aid of SimaPro version 8.0 whereby ten impact categories were evaluated. The scope included frond collection and transportation, frond sugar juice extraction, and bioethanol fermentation and purification. Evaluation on the processes involved indicated that fermentation contributed to the environmental problems the most, with a contribution range of 52% to 97% for all the impact categories. This was due to a substantial usage of nutrient during this process, which consumes high energy for its production thus contributing a significant burden to the surrounding. Nevertheless, the present system offers a great option for biofuel generation as it utilizes sugar juice from the readily available oil palm waste. Not only solving the issue of land utilization for feedstock cultivation, the enzymatic saccharification step, which commonly necessary for lignocellulosic sugar recovery could also be eliminated.

Author(s):  
V. Russo ◽  
A. E. Strever ◽  
H. J. Ponstein

Abstract Purpose Following the urgency to curb environmental impacts across all sectors globally, this is the first life cycle assessment of different wine grape farming practices suitable for commercial conventional production in South Africa, aiming at better understanding the potentials to reduce adverse effects on the environment and on human health. Methods An attributional life cycle assessment was conducted on eight different scenarios that reduce the inputs of herbicides and insecticides compared against a business as usual (BAU) scenario. We assess several impact categories based on ReCiPe, namely global warming potential, terrestrial acidification, freshwater eutrophication, terrestrial toxicity, freshwater toxicity, marine toxicity, human carcinogenic toxicity and human non-carcinogenic toxicity, human health and ecosystems. A water footprint assessment based on the AWARE method accounts for potential impacts within the watershed. Results and discussion Results show that in our impact assessment, more sustainable farming practices do not always outperform the BAU scenario, which relies on synthetic fertiliser and agrochemicals. As a main trend, most of the impact categories were dominated by energy requirements of wine grape production in an irrigated vineyard, namely the usage of electricity for irrigation pumps and diesel for agricultural machinery. The most favourable scenario across the impact categories provided a low diesel usage, strongly reduced herbicides and the absence of insecticides as it applied cover crops and an integrated pest management. Pesticides and heavy metals contained in agrochemicals are the main contributors to emissions to soil that affected the toxicity categories and impose a risk on human health, which is particularly relevant for the manual labour-intensive South African wine sector. However, we suggest that impacts of agrochemicals on human health and the environment are undervalued in the assessment. The 70% reduction of toxic agrochemicals such as Glyphosate and Paraquat and the 100% reduction of Chlorpyriphos in vineyards hardly affected the model results for human and ecotoxicity. Our concerns are magnified by the fact that manual labour plays a substantial role in South African vineyards, increasing the exposure of humans to these toxic chemicals at their workplace. Conclusions A more sustainable wine grape production is possible when shifting to integrated grape production practices that reduce the inputs of agrochemicals. Further, improved water and related electricity management through drip irrigation, deficit irrigation and photovoltaic-powered irrigation is recommendable, relieving stress on local water bodies, enhancing drought-preparedness planning and curbing CO2 emissions embodied in products.


Resources ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 60 ◽  
Author(s):  
Mattias Gaglio ◽  
Elena Tamburini ◽  
Francesco Lucchesi ◽  
Vassilis Aschonitis ◽  
Anna Atti ◽  
...  

The need to reduce the environmental impacts of the food industry is increasing together with the dramatic increment of global food demand. Circulation strategies such as the exploitation of self-produced renewable energy sources can improve ecological performances of industrial processes. However, evidence is needed to demonstrate and characterize such environmental benefits. This study assessed the environmental performances of industrial processing of maize edible oil, whose energy provision is guaranteed by residues biomasses. A gate-to-gate Life Cycle Assessment (LCA) approach was applied for a large-size factory of Northern Italy to describe: (i) the environmental impacts related to industrial processing and (ii) the contribution of residue-based bioenergy to their mitigation, through the comparison with a reference system based on conventional energy. The results showed that oil refinement is the most impacting phase for almost all the considered impact categories. The use of residue-based bioenergy was found to drastically reduce the emissions for all the impact categories. Moreover, Cumulative Energy Demand analysis revealed that the use of biomass residues increased energy efficiency through a reduction of the total energy demand of the industrial process. The study demonstrates that the exploitation of residue-based bioenergy can be a sustainable solution to improve environmental performances of the food industry, while supporting circular economy.


Silicon ◽  
2020 ◽  
Author(s):  
Barbara von der Lühe ◽  
Laura Pauli ◽  
Britta Greenshields ◽  
Harold J. Hughes ◽  
Aiyen Tjoa ◽  
...  

Abstract The effects of land use and fire on ecosystem silicon (Si) cycling has been largely disregarded so far. We investigated the impacts of land use and fire on Si release from topsoils and litter of lowland rainforest and oil-palm plantations in Jambi Province, Indonesia. Lower concentrations of Si in amorphous silica (ASi) were found in oil-palm plantation topsoils (2.8 ± 0.7 mg g− 1) compared to rainforest (3.5 ± 0.8 mg g− 1). Higher total Si concentrations were detected in litter from oil-palm frond piles (22.8 ± 4.6 mg g− 1) compared to rainforest litter (12.7 ± 2.2 mg g− 1). To test the impact of fire, materials were burned at 300 °C and 500 °C and were shaken with untreated samples in simulated rainwater for 28 h. Untreated oil-palm topsoils showed a significantly lower Si release (p≤ 0.05) compared to rainforest. The fire treatments resulted in an increased Si release into simulated rainwater. Si release from oil-palm topsoils and litter increased by a factor of 6 and 9 (500 °C), respectively, and Si release from rainforest topsoils and litter by a factor of 3 and 9 (500 °C). Differences between land use were related to initial ASi and litter Si concentrations, and to losses of soil organic matter during burning. We conclude that transformation of rainforest into oil palm plantations could be an important and immediate Si source after a fire event but may indirectly lead to a decrease in the long-term Si availability to plants.


Author(s):  
N. Lourenço ◽  
L. M. Nunes

Abstract This study benchmarks vermifiltration (VF) as secondary wastewater treatment in three nature-based decentralized treatment plants using life-cycle assessment. The comparison is justified by the comparatively easier and cheaper operation of VF when compared to more traditional technologies, including small rate infiltration (SRI), constructed wetlands (CW), and activated sludge (AS). Standard life cycle assessment was used and applied to three case studies located in southern Europe. Material intensity during construction was highest for VF, but impacts during operation were lower, compensating those of the other phases. Impacts during the construction phase far outweigh those of operation and dismantling for facilities using constructed wetlands and activated sludge, when the number of served inhabitants is small, and due to lack of economies of scale. VF used as secondary treatment was shown to contribute to reducing the environmental impacts, mainly in constructed wetlands and activated sludge. The replacement of CW by VF seems to bring important environmental benefits in most impact categories, in particular in the construction phase. The replacement by VF in facilities with SRI seems to result in the improvement of some of the impact categories, in particular in the operation phase. As for dismantling, no conclusive results were obtained.


2021 ◽  
Vol 897 ◽  
pp. 137-142
Author(s):  
Luiza Silva ◽  
Elisabete Silva ◽  
Isabel Brás ◽  
Idalina Domingos ◽  
Dulcineia Wessel ◽  
...  

The Life Cycle Assessment (LCA) is one of the most important analytical tools available to provide the scientific basis of engineering solutions for sustainability. The focus of this study was a LCA (cradle to gate) of a product intended to be used in countertops. The functional unit chosen was 1 m2 of finished panel (countertop) and the boundary system involved the study of raw materials and product packaging and the panel’s production process. The chosen method for impact assessment was EPD (2018) available in SimaPro PhD software and Acidification, Eutrophication, Global Warming, Photochemical Oxidation, Abiotic Depletion (elements), Abiotic Depletion (fossil fuels), Water Scarcity and Ozone Layer Depletion were the impact categories considered. Results showed that the panel’s manufacturing is the process that presented the highest influence in all categories analyzed ranging from 88% on Abiotic Depletion to approximately 101% on Water Scarcity. Polyvinylchloride (PVC) is the greatest contributors to all impact categories except to Photochemical Oxidation that is the Polyester.


Agronomy ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 2433
Author(s):  
Jaroslav Bernas ◽  
Tereza Bernasová ◽  
Hans-Peter Kaul ◽  
Helmut Wagentristl ◽  
Gerhard Moitzi ◽  
...  

Winter cereal:legume intercropping is considered a sustainable arable farming system not only in temperate regions but also in Mediterranean environments. Previous studies have shown that with suitable crop stand composition, high grain yield can be achieved. In this study, a life cycle assessment (LCA) of the influence of sowing ratio and nitrogen (N) fertilization on grain nitrogen yield of oat (Avena sativa L.) and pea (Pisum sativum L.) in intercrops was performed to find the optimal design to achieve low environmental impact. This study compared the environmental impact of oat:pea intercrops using agricultural LCA. Monocrops of oat and pea and substitutive intercrops, which were fertilized with different levels of N, were compared. The system boundaries included all the processes from cradle to farm gate. Mass-based (grain N yield) and area-based (land demand for generating the same grain N yield) functional units were used. The results covered the impact categories related to the agricultural LCAs. The ReCiPe 2016 Midpoint and Endpoint characterization model was used for the data expression. According to the results, an unfertilized combination of oat and pea (50%:50%) had the lowest environmental impact in comparison with the other 14 assessed variants and selected impact categories. In the assessed framework, pea monocrops or intensively fertilized oat monocrops can also be considered as alternatives with relatively low impact on the environment. However, an appropriate grain N yield must be reached to balance the environmental impact resulting from the fertilizer inputs. The production and use of fertilizers had the greatest impact on the environment within the impact categories climate change, eutrophication, and ecotoxicity. The results indicated that high fertilizer inputs did not necessarily cause the highest environmental impact. In this respect, the achieved grain N yield level, the choice of allocation approach, the functional unit, and the data expression approach played dominant roles.


2021 ◽  
Vol 3 (11) ◽  
Author(s):  
Anna Elisabeth Gnielka ◽  
Christof Menzel

AbstractEvery consumer’s decision has an impact on the environment, and even basic food products such as pasta have an impact due to their high consumption rates. Factors that can be influenced by the consumer include the preparation (cooking), last mile and packaging phases. The last mile has not been considered in most studies but contributes considerably to the environmental impact of pasta. The three phases and their environmental impact on the life cycle of pasta are analyzed in this cradle-to-grave life cycle assessment. The focus of the study lies on the impact categories climate change, agricultural land occupation, fossil depletion, water depletion, freshwater eutrophication and freshwater ecotoxicity. Inventory data were taken from other studies, were collected in cooperation with a zero-packaging organic grocery store in Germany or were gained in test series. Our results show that the preparation of pasta has the greatest environmental impact (over 40% in the impact categories climate change and fossil depletion and over 50% in the impact category freshwater eutrophication), followed by the last mile (over 20% in the impact categories climate change and fossil depletion) and lastly the packaging (nearly 9% in the impact categories freshwater eutrophication and freshwater ecotoxicity). Based on our study´s results, we provide some recommendations for minimizing the environmental impacts of pasta.


2020 ◽  
Vol 12 (8) ◽  
pp. 3214
Author(s):  
Silvia Mara Bortoloto Damasceno Barcelos ◽  
Rodrigo Salvador ◽  
Maria da Graça Guedes ◽  
Antonio Carlos de Francisco

Brazilian silk production is amongst the five largest in the world. Nonetheless, there is no life cycle assessment study on silk cocoon production and its upstream processes, pertaining to the mulberry production (fundamental upstream process for silk production), in the existing literature. The objective of this study was to identify opportunities to improve the environmental profile of mulberry and silk cocoon production under Brazilian conditions. To that end, a life cycle assessment was conducted for the core processes of mulberry and silk cocoon production and upstream processes of raw material production, using the ReCiPe method for life cycle impact assessment using nine impact categories. Overall, the mulberry production showed greater impacts than the cocoon production for the impact categories analyzed. A few opportunities for improving the environmental profile of mulberry and silk cocoon production under Brazilian conditions included replacing the Kraft paper used to cover the rearing beds, replacing the standard tractor used to fetch mulberry leaves, replacing light bulbs, conducting a more sustainable mulberry and cocoon production, and setting a reverse logistics system for plastic and paper packaging waste. Nevertheless, many of these measures are long-term strategies. Besides, many of them need further economic feasibility assessment.


Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 447
Author(s):  
Selim Karkour ◽  
Tomohiko Ihara ◽  
Tadahiro Kuwayama ◽  
Kazuki Yamaguchi ◽  
Norihiro Itsubo

The global demand for air conditioners (ACs) has more than tripled since 1990, with 1.6 billion units currently in use. With the rapid economic and population growth of countries located in the hottest parts in the world, this trend is likely to continue in the future. The aim of this study was to show the benefits of introducing air conditioners with different materials or different technologies such as inverters with high energy-saving performance on the environment and human health in Indonesia. To evaluate the environmental impacts of the different technologies, a cradle-to-grave life cycle assessment (LCA) of air conditioners was conducted using the life-cycle impact assessment method based on endpoint modeling (LIME3). As expected, the use stage has the largest global warming potential (GWP), representing more than 90% of the impact, whereas copper and nickel have the most important impact in terms of resource consumption (about 50%). We found that the impacts are heavily dependent on the country’s energy mix, but reduction can be achieved by introducing better technologies. The integration factors from LIME3 were then applied to estimate the external cost of each model; the results showed that the use stage also has the most influence. Even though the impact of climate change is important, air pollution impact must be seriously considered as its impact was found to be the highest (about 60% of the total impact). The external cost was finally compared to the possible benefits produced by the introduction of air conditioning technologies during their 10-year life cycle. We found that the impacts are twice that of the benefit for the best model (USD 2003 vs. 1064); however, the novelty of this study is that the benefit was also considered. In the future, developing countries should promote AC models with inverters, refrigerants with low global warming impact such as natural refrigerants, and encourage the recycling of units as soon as possible. The energy mix for electricity production is also a key parameter to consider.


2021 ◽  
Vol 11 (3) ◽  
pp. 1160
Author(s):  
Antonella Accardo ◽  
Giovanni Dotelli ◽  
Marco Luigi Musa ◽  
Ezio Spessa

This paper presents the results of an environmental assessment of a Nickel-Manganese-Cobalt (NMC) Lithium-ion traction battery for Battery Electric Light-Duty Commercial Vehicles (BEV-LDCV) used for urban and regional freight haulage. A cradle-to-grave Life Cycle Inventory (LCI) of NMC111 is provided, operation and end-of-life stages are included, and insight is also given into a Life Cycle Assessment of different NMC chemistries. The environmental impacts of the manufacturing stages of the NMC111 battery are then compared with those of a Sodium-Nickel-Chloride (ZEBRA) battery. In the second part of the work, two electric-battery LDCVs (powered with NMC111 and ZEBRA batteries, respectively) and a diesel urban LDCV are analysed, considering a wide set of environmental impact categories. The results show that the NMC111 battery has the highest impacts from production in most of the impact categories. Active cathode material, Aluminium, Copper, and energy use for battery production are the main contributors to the environmental impact. However, when vehicle application is investigated, NMC111-BEV shows lower environmental impacts, in all the impact categories, than ZEBRA-BEV. This is mainly due to the greater efficiency of the NMC111 battery during vehicle operation. Finally, when comparing BEVs to a diesel LDCV, the electric powertrains show advantages over the diesel one as far as global warming, abiotic depletion potential-fossil fuels, photochemical oxidation, and ozone layer depletion are concerned. However, the diesel LDCV performs better in almost all the other investigated impact categories.


Sign in / Sign up

Export Citation Format

Share Document