scholarly journals Utilisation of Waste-Based Geopolymer in Asphalt Pavement Modification and Construction—A Review

2021 ◽  
Vol 13 (6) ◽  
pp. 3330
Author(s):  
Abdalrhman Milad ◽  
Ahmed Suliman B. Ali ◽  
Ali Mohammed Babalghaith ◽  
Zubair Ahmed Memon ◽  
Nuha S. Mashaan ◽  
...  
Keyword(s):  
Asphalt Pavement ◽  
Mine Waste ◽  
Asphalt Mixture ◽  
Environmental Benefits ◽  
Engineering Properties ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Low Temperature Cracking ◽  
Pavement Construction ◽  
By Products

The use of geopolymer in pavement constructions is strongly encouraged. Many studies have demonstrated the vast potential of using industrial-by-products-based geopolymers. This paper discusses the modification of asphalt binders with geopolymers, namely geopolymer-modified asphalt (GMA) and geopolymer-modified asphalt mixture (GMAM). In addition, curing geopolymer materials, engineering properties, production techniques, and prospective utilisation in the pavement construction, such as durability and sustainability, are also discussed. The literature review showed that many industrial by-products, including red mud, blast furnace slag, fly ash, and mine waste, are used to produce geopolymers because of the metal components such as silicon and aluminium in these materials. The geopolymers from these materials influence the rheological and physical properties of asphalt binders. Geopolymers can enhance asphalt mixture performance, such as stability, fatigue, rutting, and low-temperature cracking. The use of geopolymers in asphalt pavement has beneficial impacts on sustainability and economic and environmental benefits.

Study on Low Temperature Performance of SBS Modified Asphalt and its Mixture

2014 ◽  
Vol 587-589 ◽  
pp. 1332-1336
Author(s):  
Jun Qing Chen ◽  
Ai Jun Li ◽  
Mei Qian Jin ◽  
Min Nan Zheng ◽  
Wan Yi Yang
Keyword(s):  
Tensile Strength ◽  
Low Temperature ◽  
Temperature Stress ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Low Temperature Cracking ◽  
Low Temperature Performance ◽  
Sbs Modified Asphalt

Prone to low temperature cracking of asphalt pavement problems in cold areas, testing BBR on 70# base asphalt and 4 kinds of different dosage of SBS modified asphalt, testing TSRST on their mixture to appraisal the low temperature performance of SBS modified asphalt mixture. Results show that compared with the temperature stress of internal cracks of base asphalt and SBS modified asphalt mixture not rise significantly. But the stress of SBS asphalt mixture growing slow and the temperature of cracking reduce obviously; it means the low temperature performance improved. This shows that SBS improves the toughness and reduced the modulus of asphalt mixture in low temperature, rather than increasing the tensile strength of mixture specimens.

scholarly journals Laboratory and Field Investigation of the Feasibility of Crumb Rubber Waste Application to Improve the Flexibility of Anti-Rutting Performance of Asphalt Pavement

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1738 ◽  
Author(s):  
Hongyin Li ◽  
Hailong Jiang ◽  
Wenwu Zhang ◽  
Peng Liu ◽  
Shanshan Wang ◽  
...  
Keyword(s):  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Field Investigation ◽  
Compression Tests ◽  
Modified Asphalt ◽  
Asphalt Mix ◽  
Low Temperature Cracking ◽  
Indirect Tensile

Resistance of asphalt mix to low-temperature cracking and rutting at high temperature is very important to ensure the service performance of asphalt pavement under seasonal changes in temperature and loading. However, it is challenging to balance the improvement of such resistance by using additives, e.g., anti-rutting agent (ARA). This study focuses on improving the flexibility of anti-rutting asphalt mix by incorporating crumb rubber (CR) and ARA. The properties of the prepared modified asphalt mix were evaluated in the laboratory by performing wheel tracking, three-point bending, indirect tensile, and uniaxial compression tests. The experimental results showed that the dynamic stability of modified asphalt mix was significantly increased due to the addition of ARA and further improved by incorporating CR. The maximum bending strain at −10 °C was increased due to the contribution of CR. The results of indirect tensile strength and resilient modulus further indicated that the CR-modified anti-rutting mixture was more flexible. Moreover, the field observation and evaluation indicated that the CR-modified anti-rutting asphalt pavement met the standard requirements, better than normal asphalt mixture in many parameters. A conclusion can be made that incorporating CR in asphalt mixture prepared with ARA can improve pavement performance at both high and low in-service temperatures.

Polyacrylate Modified Binder for Sustainable Asphalt Pavement Performances Using Superpave Mix Design

2015 ◽  
Vol 747 ◽  
pp. 238-241
Author(s):  
Wan Adilah Ismail ◽  
Intan Rohani Endut ◽  
Sit Zaharah Ishak
Keyword(s):  
Material Selection ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Binder Content ◽  
Mix Design ◽  
Asphalt Binders ◽  
Air Voids ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Pavement Construction

Sustainable asphalt pavement is important in decreasing material costs by improving the existing material such as modified asphalt binders. It is also needed to provide a quality riding for road users. In achieving quality riding, the material selection and mix design must be correctly examined before using in pavement construction. Then, the aims of this study are to determine suitability of material selected by examining the aggregate properties and modified asphalt binder. In modified asphalt binder, 6% of polyacrylate polymer was added as an additive in 500g of binder content to dissolve. It was checked through Superpave gyratory compactor in determining air voids samples in term of height after compacted. The samples were mixed with different percentages of binder content; 5%, 5.5%, 6% and 6.5% to produce control and polyacrylate modified samples. 8 gyratory for Ninitialand 100 gyratory for Ndesignwere used in compaction of samples to determine air voids in term of height. The results show that 5.5% of binder content of polyacrylate modified samples has lower air voids compare than control samples. Thus, modified binders are able to minimize binder usage and save natural sources and also cost by improving bonding between mixtures to prevent pavement failure

Laboratory Investigation Effect of Warm Mix Additives on the Viscosity of SBS Modified Asphalt

2013 ◽  
Vol 448-453 ◽  
pp. 1329-1332
Author(s):  
Qi Yang Zhu ◽  
Yuan Zhuang ◽  
Guang Wei Hu ◽  
Ye Mao Zhang
Keyword(s):  
Working Conditions ◽  
Warm Mix Asphalt ◽  
Environmental Benefits ◽  
Viscosity Reduction ◽  
Engineering Properties ◽  
Mixing Performance ◽  
Modified Asphalt ◽  
Warm Mix Additives ◽  
Pavement Construction ◽  
Sbs Modified Asphalt

Warm Mix Asphalt (WMA) technology has become increasingly popular in pavement construction because of its environmental benefits and its fine engineering properties. In order to optimize mixing performance of WMA, four kinds of warm mix additives used in China were evulated by viscosity testing. Thus, this paper is mainly to reduce bitumen viscosity, which in turn improves mix workability, produces fewer emissions, and generally creates better working conditions. Results identified that the Sasobit additive has a large viscosity reduction and has a fine workability, and is appropriate for pavement construction.

Study of warm mix asphalt using reclaimed asphalt pavement and copper slag: a review

2020 ◽  
Vol 47 (4) ◽  
pp. 355-362 ◽  
Author(s):  
Ishfaq Mohi ud Din ◽  
Mohammad Shafi Mir
Keyword(s):  
Asphalt Pavement ◽  
Road Construction ◽  
Copper Slag ◽  
Warm Mix Asphalt ◽  
Environmental Benefits ◽  
Engineering Properties ◽  
Asphalt Pavements ◽  
Construction Sector ◽  
Pavement Construction ◽  
Work Done

The incorporation of copper slag (CS) in asphalt pavements proves to be a good substitute in replacing the natural aggregates. This reduces pavement construction cost and plays a key role in protecting the environment. The CS can be used with recycled asphalt pavement (RAP) material especially in warm mix asphalt pavements. The use of RAP not only leads to environmental benefits but also considerably saves natural resources and decreases the requirement to use virgin bitumen. The use of CS in pavement construction sector eliminates the disposal as well as leaching problems associated with it. This paper focuses on the review of studies carried out on the use of CS along with RAP in road construction. It presents and discusses the work done on the use of CS in the pavement construction sector and the use of RAP in providing the necessary stiffening effect to the asphalt pavements. It analyzes the requirement and advantage of using CS with RAP in asphalt pavements in light of previous research findings and its influence on various engineering properties in pavements. This paper also reviews the work done to study the environmental impact of using CS in asphalt mixes.

scholarly journals Study on Low-Temperature Cracking Performance of Asphalt under Heat and Light Together Conditions

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1541 ◽  
Author(s):  
Limin Li ◽  
Zhaoyang Guo ◽  
Longfei Ran ◽  
Jiewen Zhang
Keyword(s):  
Low Temperature ◽  
Early Stage ◽  
Asphalt Pavement ◽  
Climatic Conditions ◽  
Asphalt Binders ◽  
Composition Analysis ◽  
Cracking Resistance ◽  
Modified Asphalt ◽  
Cracking Performance ◽  
Low Temperature Cracking

The low-temperature cracking performance of asphalt is considered one of the main deteriorations in asphalt pavements. However, there have been few studies on the low-temperature cracking performance of asphalt under heat and light together. Hence, the ductility test, bending beam rheometer (BBR) test, and asphalt composition analysis test are combined to investigate the low-temperature cracking performance under heat and light together based on the climatic conditions of China. The styrene–butadiene–styrene block copolymer (SBS)-modified asphalt binders were prepared with different modifier types and base asphalt in this research. The results show that the low-temperature cracking resistance of asphalt reduces under heat and light together. It is obviously reduced at the early stage, and it becomes worse with the increase of the aging time, temperature, and ultraviolet (UV) intensity. The asphalt composition has a significant impact on its low-temperature cracking performance, and the SBS modifier can improve the low-temperature cracking resistance of asphalt. The rational selection of base asphalt and modifier can improve the low-temperature cracking performance of asphalt. Under heat and light together, whether base asphalt or modified asphalt, the change trends of their ductility and component content are similar. Therefore, to improve the anti-cracking ability of the asphalt pavement, it is suggested to use the ductility of asphalt aged by heat and light together for 15 days as the evaluation index of the low-temperature cracking performance of asphalt, and asphalt should be selected according to the temperature and UV intensity of the asphalt pavement use area.

scholarly journals Material Properties and Environmental Benefits of Hot-Mix Asphalt Mixes Including Local Crumb Rubber Obtained from Scrap Tires

Environments ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 47
Author(s):  
Lim Min Khiong ◽  
Md. Safiuddin ◽  
Mohammad Abdul Mannan ◽  
Resdiansyah
Keyword(s):  
Asphalt Binder ◽  
Crumb Rubber ◽  
Environmental Benefits ◽  
Asphalt Binders ◽  
Rubber Content ◽  
Scrap Tires ◽  
Asphalt Mixes ◽  
Temperature Resistance ◽  
Modified Asphalt ◽  
Marshall Stability

This paper presents the results of a laboratory-based experimental investigation on the properties of asphalt binder and hot-mix asphalt (HMA) mixes modified by locally available crumb rubber, which was used as a partial replacement of asphalt by weight. In this study, fine crumb rubber with a particle size in the range of 0.3–0.6 mm, obtained from scrap tires, was added to the asphalt binder through the wet process. Crumb rubber contents of 5%, 10%, 15%, and 19% by weight of asphalt were added to the virgin binder in order to prepare the modified asphalt binder samples, while the unmodified asphalt binder was used as the control sample. The crumb rubber modified binder samples were examined for measuring viscosity indirectly using the penetration test, and temperature resistance using the softening point test. Later, both the modified and unmodified asphalt binders were used to produce HMA mixes. Two categories of HMA mix commonly used in Malaysia—namely, AC 14 (dense-graded) and SMA 14 (gap-graded)—were produced using the modified asphalt binders containing 5%, 10%, 15%, and 19% crumb rubber. Two AC 14 and SMA 14 control mixes were also produced, incorporating the unmodified asphalt binder (0% crumb rubber). All of the AC 14 and SMA 14 asphalt mixes were examined in order to determine their volumetric properties, such as bulk density, voids in total mix (VTM), voids in mineral aggregate (VMA), and voids filled with asphalt (VFA). In addition, the Marshall stability, Marshall flow, and stiffness of all of the AC 14 and SMA 14 mixes were determined. Test results indicated that the modified asphalt binders possessed higher viscosity and temperature resistance than the unmodified asphalt binder. The viscosity and temperature resistance of the asphalt binders increased with the increase in their crumb rubber content. The increased crumb rubber content also led to improvements in the volumetric properties (bulk density, VTM, VMA, and VFA) of the AC 14 and SMA 14 mixes. In addition, the performance characteristics of the AC 14 and SMA 14 mixes—such as Marshall stability, Marshall flow, and stiffness—increased with the increase in crumb rubber content. However, the AC 14 mixes performed much better than the SMA 14 mixes. The overall research findings suggest that crumb rubber can be used to produce durable and sustainable HMA mixes, with manifold environmental benefits, for use in flexible pavements carrying the heavy traffic load of highways.

Determining Optimum Carbon Nanotubes Content for Asphalt Mixture in Road Pavements

2021 ◽  
Vol 1023 ◽  
pp. 121-126
Author(s):  
Van Bach Le ◽  
Van Phuc Le
Keyword(s):  
Carbon Nanotubes ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Construction Cost ◽  
Asphalt Mixtures ◽  
Static Modulus ◽  
Pavement Construction ◽  
Modified Binder ◽  
Marshall Stability

Although small amount of binder in asphalt concrete mixture may commonly range from 3.5 to 5.5% of total mixture as per many international specifications, it has a significant impact on the total cost of pavement construction. Therefore, this paper investigated the effects of five carbon nanotubes contents of 0.05%, 0.1%, 0.15%, 0.2%, 0.25% by asphalt weight as an additive material for binder on performance characteristics of asphalt mixtures. Performance properties of CNTs modified asphalt mixtures were investigated through the Marshall stability (MS) test, indirect tensile (IDT) test, static modulus (SM) test, wheel tracking (WT) test. The results indicated that asphalt mixtures with CNT modified binder can improve both the rutting performance, IDT strength and marshall stability of tested asphalt mixtures significantly at higher percentages of carbon nanotubes. However, the issue that should be considered is the construction cost of asphalt pavement. Based on the asphalt pavement structural analysis and construction cost, it can be concluded that an optimum CNT content of 0.1% by asphalt weight may be used as additive for asphalt binder in asphalt mixtures.

Rubber Modified Asphalt Mixture Properties and Mechanical Testing

2011 ◽  
Vol 105-107 ◽  
pp. 810-817 ◽  
Author(s):  
Rong Hui Zhang ◽  
Jia Liu ◽  
Jian Chao Huang ◽  
Yi Fu
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Specimen Preparation ◽  
Twin Screw Extrusion ◽  
Modified Asphalt ◽  
Flexural Tensile Strength ◽  
Screw Extrusion ◽  
Twin Screw ◽  
Compound Particle

To solve the high-temperature rutting problem of asphalt pavement, the old rubber of the tire rubber and plastic of general polyethylene waste composite modified asphalt mixture is proposed. The plastic and rubber compound particle was made by the rubber through efficient desulfurization additives, pre-swelling, twin-screw extrusion equipment. The particles mixed with the asphalt mixtures specimen preparation and the dynamic stability experiments, composite beam fatigue experiments, flexural tensile strength and modulus experiments and anti-reflective pavement cracks and other mechanical experiments are performed. The comparative data obtained by the rubber and plastic composited modified asphalt mixtures and SBS asphalt mixtures prove that the rubber and plastic composited modified asphalt mixtures have excellent rutting resistance and fatigue resistance.

scholarly journals Review on Applications of Lignin in Pavement Engineering: A Recent Survey

2022 ◽  
Vol 8 ◽  
Author(s):  
Hui Yao ◽  
Yiran Wang ◽  
Junfu Liu ◽  
Mei Xu ◽  
Pengrui Ma ◽  
...  
Keyword(s):  
Low Cost ◽  
Asphalt Mixture ◽  
Complex Mixture ◽  
Development Trend ◽  
Environmental Benefits ◽  
Extraction Technology ◽  
Environmental Friendliness ◽  
Modified Asphalt ◽  
Soil Stabilizer ◽  
Pavement Engineering

Lignin is the second-largest plant polymer on Earth after cellulose. About 98% of lignin produced in the papermaking and pulping industry is used for combustion heating or power generation. Less than 2% of lignin is used in more valuable fields, mainly in the formulation of dispersants, adhesives, and surfactants. Asphalt is one of the most important materials in pavement engineering. It is a dark brown complex mixture composed of hydrocarbons with different molecular weights and their non-metallic derivatives. Because the chemical structure of lignin is similar to that of asphalt, it is a carbon-based hydrocarbon material. More researchers studied the application of lignin in pavement engineering. In this paper, the structure, application, and extraction technology of lignin were summarized. This is a review article describing the different applications of lignin in pavement engineering and exploring the prospects of the application. There are three main types of pavement materials that can be used for lignin in pavement engineering, which are asphalt, asphalt mixture, and roadbed soil. In asphalt, lignin can be used as a modifier, extender, emulsifier, antioxidant, and coupling agent. In asphalt mixtures, lignin can be used as an additive. In road base soils, lignin can be used as a soil stabilizer. Furthermore, the article analyzed the application effects of lignin from the life cycle assessment. The conclusions suggest that lignin-modified asphalt exhibits more viscosity and hardness, and its high-temperature resistance and rutting resistance can be significantly improved compared with conventional asphalt. In addition, some lignin-modified asphalt binders exhibit reduced low-temperature crack resistance and fatigue resistance, which can be adjusted and selected according to the climate change in different regions. The performance of lignin as an asphalt mixture additive and asphalt extender has been proved to be feasible. Lignin can also produce good mechanical properties as well as environmental benefits as a soil stabilizer. In summary, lignin plays an important role in asphalt pavement and roadbed soil, and it is likely to be a development trend in the future due to its environmental friendliness and low cost. More research is needed to generalize the application of lignin in pavement engineering.

Sign in / Sign up

Export Citation Format

Share Document