scholarly journals Archaeometry and Analysis of Ceramic Materials from Ávila (Spain): Late-Vetton Evidence

2021 ◽  
Vol 13 (11) ◽  
pp. 5910
Author(s):  
Isabel Sonsoles de Soto García ◽  
María de los Reyes de Soto García ◽  
Blas Cabrera González ◽  
Rosario García Giménez
Keyword(s):  
Ceramic Materials ◽  
Minor Elements ◽  
Ceramic Samples ◽  
Local Origin ◽  
Icp Ms ◽  
Materials Used ◽  
First Time ◽  
Single Set ◽  
Archaeological Excavations ◽  
Made In

From the archaeological excavations carried out during 2019/2020 in the walled Ávila city (Spain), numerous ceramic fragments of different chronologies have appeared that have allowed us to find settlement sequences in this city that place its beginnings before Romanization. The latest interventions allow us to know that the wall of Ávila has a Roman origin, and it was developed on an indigenous nucleus from the 1st century BC that received the Romanizing influence during the 1st century AD. In addition, it was possible to establish that the materials used for their preparation are consistent with the materials of the geological environment, which suggests a local origin. This paper presents the study of a set of ceramic samples using XRD, ICP/MS, SEM/EDX, and linescan analysis. A statistical analysis of the samples using the minor elements concentrations has suggested that even though the local origin, there were several production centers within painted ceramics that until now were always included as a single set. Finally, due to the importance of the “late-Vetton” or “late Iberic” ceramics (mid-1st century BC—middle of the 1st century AC) from the archaeological aspect, for the first time, these ceramics are studied in detail from chemical and mineralogical tests. It was discovered that these samples had been made in an oven that had not exceeded 800 °C due to the persistence of different phases after cooking.

Mosses and lichens of Shokalsky Island (Kara Sea, Yamal-Nenets Autonomous Area)

2020 ◽  
Vol 54 (2) ◽  
pp. 497-513 ◽  
Author(s):  
L. N. Beldiman ◽  
I. N. Urbanavichene ◽  
V. E. Fedosov ◽  
E. Yu. Kuzmina
Keyword(s):  
Plant Communities ◽  
Species Distribution ◽  
Arctic Tundra ◽  
Kara Sea ◽  
Lichenicolous Fungi ◽  
South West ◽  
West Part ◽  
First Time ◽  
Nenets Autonomous ◽  
Made In

We studied in detail a moss-lichen component of Shokalsky Island vegetation for the first time and identified 79 species of mosses and 54 species and 2 subspecies of lichens and lichenicolous fungi. All species of mosses and 23 species and 2 subspecies of lichens and lichenicolous fungi are recorded for the first time for the island. The study is based on collections made in South West part of the island, in arctic tundra. We also explored the participation of the mosses and lichens in the main types of plant communities and the species distribution in 10 ecotopes. The paper describes the noteworthy findings (Abrothallus parmeliarum, Aongstroemia longipes, Arthonia peltigerea, Caloplaca caesiorufella, Catillaria stereocaulorum, Ceratodon heterophyllus, Lecanora leptacinella, Sphagnum concinnum, S. olafii) and features of bryo- and lichenoflora of Shokalsky Island.

Characterization of Different Types of Biomass Wastes Using Thermogravimetric and ICP-MS Analyses

2020 ◽  
Vol 70 (12) ◽  
pp. 4594-4600
Keyword(s):  
Thermogravimetric Analysis ◽  
Food Industry ◽  
Wood Waste ◽  
Biomass Ash ◽  
Minor Elements ◽  
Ms Analysis ◽  
Icp Ms ◽  
Different Types

The purpose of this study was to characterize some types of biomass wastes resulted from different activities such as: agriculture, forestry and food industry using thermogravimetric and ICP-MS analyses. Also, it was optimized an ICP-MS method for the determination of As, Cd and Pb from biomass ash samples. The ICP-MS analysis revealed that the highest concentration of metals (As, Cd, Pb) was recorded in the wood waste ash sample, also the thermogravimetric analysis indicated that the highest amount of ash was obtained for the same sample (26.82%). The biomass wastes mentioned in this study are alternative recyclable materials, reusable as pellets and briquettes. Keywords: ash, biomass, ICP-MS, minor elements, TG

scholarly journals Mineralogy and Geochemistry of Ultramafic Rocks from Rachoni Magnesite Mine, Gerakini (Chalkidiki, Northern Greece)

Minerals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 934
Author(s):  
Evangelos Tzamos ◽  
Micol Bussolesi ◽  
Giovanni Grieco ◽  
Pietro Marescotti ◽  
Laura Crispini ◽  
...  
Keyword(s):  
Raw Materials ◽  
Mining Area ◽  
Ultramafic Rocks ◽  
Northern Greece ◽  
Icp Ms ◽  
Time In Literature ◽  
History Of ◽  
First Time ◽  
The Eu

The importance of magnesite for the EU economy and industry is very high, making the understanding of their genesis for the exploration for new deposits a priority for the raw materials scientific community. In this direction, the study of the magnesite-hosting ultramafic rocks can be proved very useful. For the present study, ultramafic rock samples were collected from the magnesite ore-hosting ophiolite of the Gerakini mining area (Chalkidiki, Greece) to investigate the consecutive alteration events of the rocks which led to the metallogenesis of the significant magnesite ores of the area. All samples were subjected to a series of analytical methods for the determination of their mineralogical and geochemical characteristics: optical microscopy, XRD, SEM, EMPA, ICP–MS/OES and CIPW normalization. The results of these analyses revealed that the ultramafic rocks of the area have not only all been subjected to serpentinization, but these rocks have also undergone carbonation, silification and clay alteration. The latter events are attributed to the circulation of CO2-rich fluids responsible for the formation of the magnesite ores and locally, the further alteration of the serpentinites into listvenites. The current mineralogy of these rocks was found to be linked to one or more alteration event that took place, thus a significant contribution to the metallo- and petrogenetic history of the Gerakini ophiolite has been made. Furthermore, for the first time in literature, Fe inclusions in olivines from Greece were reported.

scholarly journals Revealing the constituents of Egypt’s oldest beer using infrared and mass spectrometry

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Mohamed A. Farag ◽  
Moamen M. Elmassry ◽  
Masahiro Baba ◽  
Renée Friedman
Keyword(s):  
Large Scale ◽  
Beer Brewing ◽  
Chemical Signatures ◽  
Chemical Determination ◽  
Materials Used ◽  
High Level ◽  
Beer Production ◽  
First Time ◽  
Detailed Chemical

Abstract Previous studies have shown that the Ancient Egyptians used malted wheat and barley as the main ingredients in beer brewing, but the chemical determination of the exact recipe is still lacking. To investigate the constituents of ancient beer, we conducted a detailed IR and GC-MS based metabolite analyses targeting volatile and non-volatile metabolites on the residues recovered from the interior of vats in what is currently the world’s oldest (c. 3600 BCE) installation for large-scale beer production located at the major pre-pharaonic political center at Hierakonpolis, Egypt. In addition to distinguishing the chemical signatures of various flavoring agents, such as dates, a significant result of our analysis is the finding, for the first time, of phosphoric acid in high level probably used as a preservative much like in modern beverages. This suggests that the early brewers had acquired the knowledge needed to efficiently produce and preserve large quantities of beer. This study provides the most detailed chemical profile of an ancient beer using modern spectrometric techniques and providing evidence for the likely starting materials used in beer brewing.

Bronze Age Cremation Cemeteries in the East Midlands

1987 ◽  
Vol 53 (1) ◽  
pp. 187-221 ◽  
Author(s):  
Carol S. M. Allen ◽  
Mary Harman ◽  
Hazel Wheeler
Keyword(s):  
Bronze Age ◽  
Direct Relationship ◽  
Small Cluster ◽  
Linear Arrangement ◽  
Thin Sections ◽  
Probable Function ◽  
East Midlands ◽  
Materials Used ◽  
First Time ◽  
Organic Remains

Two Bronze Age cremation cemeteries excavated between 1968 and 1975 are reported and discussed. At Coneygre Farm, Notts., fifty-one cremations were excavated, thirty-one in pots, six in cists, and fourteen uncontained. Cremations were deposited in a roughly linear arrangement and no barrow was found. At Pasture Lodge Farm, Lincs., twenty-seven pots were found, of which twenty-five had associated cremations, and fifteen further sherds could represent burials. Vessels in this cemetery form a small cluster. Pottery from these two cemeteries is broadly similar to Deverel-Rimbury ware and with vessels from other sites in the region is considered to form an East Midlands group of Bronze Age pottery. Vessels of this type from Frieston and Grantham, Lincs., are illustrated for the first time. Examination of thin sections of the pottery from the two cemeteries suggests that most, although not all, of the materials used could have been found locally. Organic remains found in thin sections provide environmental information. The effect of soils on durability of pots and their probable function is discussed. A direct relationship is noticed for the first time between the age of the cremated individual and the capacity of the pot in which the cremation was deposited.

Fracture Behavior of Ceramics Used in Multilayer Capacitors

1986 ◽  
Vol 72 ◽  
Author(s):  
Theresa L. Baker ◽  
Stephen W. Freiman
Keyword(s):  
Crack Growth ◽  
Fracture Behavior ◽  
Ceramic Materials ◽  
Fatigue Tests ◽  
Internal Stresses ◽  
Crack Growth Behavior ◽  
Multilayer Capacitors ◽  
Materials Used ◽  
Aging Phenomena

AbstractThis study involved the determination of the effects of composition and microstructure on the fracture toughness and susceptibility to environmentally enhanced crack growth of several ceramic materials used in multilayer capacitors. Indentation-fracture procedures were used to measure KIC as well as to assess the possible effects of internal stresses on the fracture behavior of these materials and to correlate dielectric aging phenomena with strength. The environmentally enhanced crack growth behavior of these materials was determined by conducting dynamic fatigue tests in water.

Possible Causes in Breaking of Dental Implants Research

2017 ◽  
Vol 907 ◽  
pp. 104-118
Author(s):  
Maria Stoicănescu ◽  
Eliza Buzamet ◽  
Dragos Vladimir Budei ◽  
Valentin Craciun ◽  
Roxana Budei ◽  
...  
Keyword(s):  
Dental Implants ◽  
Dental Implant ◽  
Scientific Literature ◽  
Surface Characteristics ◽  
Raw Material ◽  
New Materials ◽  
Materials Used ◽  
Type Of Failure ◽  
First Time ◽  
Consequent Increase

Dental implants are becoming increasingly used in current dental practice. This increased demand has motivated manufacturers to develop varieties of product through design, but also looking for new materials used to improve surface characteristics in order to obtain a better osseointegration. But the increase in the use of implants goes to a consequent increase in the number of failures. These failures are caused either by treatment complications (peri-implantitis), by fatigue breakage under mechanical over-stress, by defective raw material, or due to errors during the insertion procedures. Although they are rare, these complications are serious in dentistry. Before to market a dental implant to clinical practitioners, the product is validated among other determinations in number of biocompatibility research. Raw material issues, details about its structure and properties are less published by the scientific literature, but all this are subject of a carefully analysis of the producers. Breaking of dental implants during surgical procedures, during the prosthetic procedures or during use (chewing, bruxism, accidents, etc.), is the second most common cause of loss of an implant after consecutive peri-implantitis rejection. Although the frequency of this type of failure for a dental implant is much smaller than those caused by the peri-implantitis, a detailed study of broken implants can explain possible causes. The use of scanning electron microscopy (SEM) in the study of the cleave areas explain the production mechanism of cleavages, starting from micro-fissures in the alloy used for the production of dental implants. These micro-fissures in weak areas of the implant (anti-rotational corners of the polygons, etc.) could generate a serious risk of cleavage first time when a higher force is applied.

scholarly journals Stroke Prevention in Atrial Fibrillation: Where are We Now?

2012 ◽  
Vol 6 ◽  
pp. CMC.S8976 ◽  
Author(s):  
Yousif Ahmad ◽  
Gregory Y.H. Lip
Keyword(s):  
Atrial Fibrillation ◽  
Stroke Prevention ◽  
Management Strategies ◽  
Bleeding Risk ◽  
Long Term Study ◽  
Risk Patients ◽  
First Time ◽  
Major Progress ◽  
Made In

Atrial fibrillation is the commonest arrhythmia worldwide and is a growing problem. AF is responsible for 25% of all strokes, and these patients suffer greater mortality and disability. Warfarin has traditionally been the only successful therapy for stroke prevention, but its limitations have resulted in underutilisation. Major progress has been made in AF research, leading to improved management strategies. Better risk stratification permits identification of truly low-risk patients who do not require anticoagulation and we are able to simplify ourevaluation of a patient's bleeding risk. The advent of novel anticoagulants means warfarin is no longer the only choice for stroke prophylaxis. These drugs circumvent many of warfarin's inconveniences, but only long-term study and use will conclusively demonstrate how they compare to warfarin. The landscape of stroke prevention in AF has changed with effective alternatives to warfarin available for the first time in 60 years—but each new option brings new considerations.

The mineralogical composition of some Scottish soils

1925 ◽  
Vol 15 (3) ◽  
pp. 257-271 ◽  
Author(s):  
James Hendrick ◽  
George Newlands
Keyword(s):  
Mineralogical Composition ◽  
Fine Sand ◽  
Plant Food ◽  
Sand Fraction ◽  
Extensive Survey ◽  
North East ◽  
The North ◽  
Local Origin ◽  
East West ◽  
Made In

1. Previous investigations showed that certain Scottish soils were of glacial drift origin, that they were comparatively rich in unweathered silicates and therefore in reserves of plant-food, that they showed considerable variation in such silicates and were capable of classification accordingly. Some indication was also shown that the glacial drift, and hence the resulting soil, was sometimes of local origin, its character being determined by the underlying rock. In the present investigation a more extensive survey of Scottish soils has been made in order to discover to what extent these preliminary findings might be applicable generally.2. For this purpose soils have been collected from various localities in the north, north-east, west and south of Scotland, and have been analysed mechanically and the “fine sand” fraction examined mineralogically.

Sign in / Sign up

Export Citation Format

Share Document