scholarly journals Conceptualization and Prototype of an Anti-Erosion Sensing Revetment for Levee Monitoring: Experimental Tests and Numerical Modeling

Water ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 3025
Author(s):  
Manuel Bertulessi ◽  
Daniele F. Bignami ◽  
Ilaria Boschini ◽  
Andrea Chiarini ◽  
Maddalena Ferrario ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Steel Wire ◽  
Data Communication ◽  
Experimental Tests ◽  
Element Model ◽  
Wire Mesh ◽  
Time Data ◽  
Protection Technology ◽  
In Situ Sensors ◽  
Twisted Wire

The problem of levee embankment control during high flows is crucial for flood risk management in floodplains. Levee defense lines are often hundreds of kilometers long and surveys during emergencies are not easy tasks. For these reasons, levees monitored with in situ sensors and a suitable Information Technology (IT) real-time data communication and integration infrastructure, so-called “smart levees”, are gaining increasing interest as a crucial protection technology in floodplains. The paper presents the conceptualization of a prototype of a levee smart revetment, based on the integration of an optical fiber (OF) cable into a steel double-twisted wire mesh. In this paper the feasibility of this kind of revetment is firstly assessed. The flow pattern of overtopping water on the embankment is discussed, thus producing a raw estimation of the shear stress acting on the revetment in the field. A sample case is then analyzed in both numerical and laboratory tests. For this purpose, a numerical Finite Element Model (FEM) to describe the mechanical behavior of a double-twisted wire mesh when loaded along its own plane is presented. Numerical results indicate that the related strain, relatively low as compared to the steel wire yield stress, can be fully detected by the optical fiber continuous Brillouin sensor. This has been validated by the experimental activity performed and a digital twin of the prototype of the smart revetment, suitable for virtually testing the product under any load and constraint conditions and tailoring the production process, has been created.

Feasibility of using self-compacting concrete in civil engineering applications

2017 ◽  
Vol 8 (3) ◽  
pp. 70
Author(s):  
Zeinab A. Etman ◽  
Mounir M. Kamal ◽  
Mohamed R. Afify ◽  
Tamer I. Ahmaed
Keyword(s):  
Cross Section ◽  
Civil Engineering ◽  
Steel Wire ◽  
Element Model ◽  
Concrete Cover ◽  
Wire Mesh ◽  
Self Compacting Concrete ◽  
Engineering Applications ◽  
Line Load ◽  
Wire Meshes

This research aimed to investigate the feasibility of using self-compacting concrete in civil engineering applications as a producing a precast hollow unit. The behavior of the hollow sections cast with self-compacted concrete beneath line-load was evaluated. An experimental work was carried out and a finite element model with ANSYS (version 15) was adopted. A total of fourteen hollow beams were cast and tested. The most variables taken into thought were; the types of reinforcement (reinforced steel bar and steel wire meshes), the types of steel wire meshes (expanded and welded steel wire mesh), number of layers of steel meshes (one layer and two layers), cross section thickness of concrete (40 mm and 60mm), concrete cover thickness (15mm and 20 mm) and also the shapes of cross section (square or circular). Special attention to initial cracking load, ultimate load, deflection, cracking pattern, energy absorption and ductility index were investigated. Good agreement was found compared with the experimental results. Out of this research; this paper presents applications of self-compacted concrete for casting skinny structural hollow members. These members can be used as precast units within the construction of the tunnel to decrease the problems in highway roads due to the difficulty of using crossing bridges particularly for kids and old people which are very useful for developing countries with great economic advantages.

scholarly journals Smart Sensing of PSC Girders Using a PC Strand with a Built-in Optical Fiber Sensor

2021 ◽  
Vol 11 (1) ◽  
pp. 359
Author(s):  
Sung Tae Kim ◽  
Hyejin Yoon ◽  
Young-Hwan Park ◽  
Seung-Seop Jin ◽  
Soobong Shin ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Prestressed Concrete ◽  
Steel Wire ◽  
Optical Fiber Sensor ◽  
Fiber Reinforced Polymer ◽  
Bridge Structure ◽  
Fbg Sensor ◽  
Prestressing Force ◽  
Reinforced Polymer ◽  
Loading Tests

This paper presents a multi-functional strand capable of introducing prestressing force in prestressed concrete (PSC) girders and sensing their static and dynamic behavior as well. This innovative strand is developed by replacing the core steel wire of the strand used in PSC structures with a carbon fiber-reinforced polymer (CFRP) wire with a built-in optical Fiber Bragg Grating (FBG) sensor. A full-scale girder specimen was fabricated by applying this multi-function strand to check the possibility of tracking the change of prestressing force at each construction stage. Moreover, dynamic data could be secured during dynamic loading tests without installing accelerometers and made it possible to obtain the natural frequencies of the structure. The results verified the capability to effectively manage the prestressing force in the PSC bridge structure by applying the PC strand with a built-in optical sensor known for its outstanding practicability and durability.

scholarly journals Discrete element analysis of the punching behaviour of a secured drapery system: from laboratory characterization to idealized in situ conditions

2021 ◽  
Author(s):  
Antonio Pol ◽  
Fabio Gabrieli ◽  
Lorenzo Brezzi
Keyword(s):  
Mechanical Response ◽  
Steel Wire ◽  
Discrete Element ◽  
Wire Mesh ◽  
Steel Plates ◽  
Loading Conditions ◽  
Element Analysis ◽  
In Situ Conditions ◽  
Wire Meshes

AbstractIn this work, the mechanical response of a steel wire mesh panel against a punching load is studied starting from laboratory test conditions and extending the results to field applications. Wire meshes anchored with bolts and steel plates are extensively used in rockfall protection and slope stabilization. Their performances are evaluated through laboratory tests, but the mechanical constraints, the geometry and the loading conditions may strongly differ from the in situ conditions leading to incorrect estimations of the strength of the mesh. In this work, the discrete element method is used to simulate a wire mesh. After validation of the numerical mesh model against experimental data, the punching behaviour of an anchored mesh panel is investigated in order to obtain a more realistic characterization of the mesh mechanical response in field conditions. The dimension of the punching element, its position, the anchor plate size and the anchor spacing are varied, providing analytical relationships able to predict the panel response in different loading conditions. Furthermore, the mesh panel aspect ratio is analysed showing the existence of an optimal value. The results of this study can provide useful information to practitioners for designing secured drapery systems, as well as for the assessment of their safety conditions.

scholarly journals Interlocking birch plywood structures

2021 ◽  
pp. 095605992110222
Author(s):  
Chrysl A Aranha ◽  
Markus Hudert ◽  
Gerhard Fink
Keyword(s):  
High Surface ◽  
Surface Hardness ◽  
Experimental Tests ◽  
Digital Fabrication ◽  
Element Model ◽  
Component Level ◽  
Geometrical Properties ◽  
Stiffness Properties ◽  
The Face ◽  
Strength And Stiffness

Interlocking Particle Structures (IPS) are geometrically stable assemblies, usually fabricated from plate type elements that are interconnected by slotted joints. IPS are demountable and their components have the potential to be used and reused in different structures and configurations. This paper explores the applicability of birch plywood panels, which are characterized by a high surface hardness, for this type of structural system. Experimental tests were conducted to determine the mechanical properties of birch plywood plates. Moreover, IPS connections with different geometrical properties were investigated for two different load exposures: bending and rotation. The characteristics under bending exposure are influenced by the orientation of the face-veneers. For the rotational load exposure, very small strength and stiffness properties have been identified. A linear elastic finite element model is presented that shows a wide agreement with the test results. The study serves as an initial probe into the performance of IPS structures at the component level. Various aspects that are relevant for the design of IPS, such as the assembly, the accuracy and challenges regarding digital fabrication, the durability, and the structural performance are discussed.

scholarly journals Experimental and Numerical Investigation on the Perforation Resistance of Double-Layered Metal Shield under High-Velocity Impact of Armor-Piercing Projectiles

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 626
Author(s):  
Riccardo Scazzosi ◽  
Marco Giglio ◽  
Andrea Manes
Keyword(s):  
High Strength Steel ◽  
Steel Plate ◽  
Experimental Studies ◽  
Practical Interest ◽  
High Strength ◽  
Experimental Tests ◽  
Element Model ◽  
Transportation Systems ◽  
Metal Shield ◽  
Softening Parameter

In the case of protection of transportation systems, the optimization of the shield is of practical interest to reduce the weight of such components and thus increase the payload or reduce the fuel consumption. As far as metal shields are concerned, some investigations based on numerical simulations showed that a multi-layered configuration made of layers of different metals could be a promising solution to reduce the weight of the shield. However, only a few experimental studies on this subject are available. The aim of this study is therefore to discuss whether or not a monolithic shield can be substituted by a double-layered configuration manufactured from two different metals and if such a configuration can guarantee the same perforation resistance at a lower weight. In order to answer this question, the performance of a ballistic shield constituted of a layer of high-strength steel and a layer of an aluminum alloy impacted by an armor piercing projectile was investigated in experimental tests. Furthermore, an axisymmetric finite element model was developed. The effect of the strain rate hardening parameter C and the thermal softening parameter m of the Johnson–Cook constitutive model was investigated. The numerical model was used to understand the perforation process and the energy dissipation mechanism inside the target. It was found that if the high-strength steel plate is used as a front layer, the specific ballistic energy increases by 54% with respect to the monolithic high-strength steel plate. On the other hand, the specific ballistic energy decreases if the aluminum plate is used as the front layer.

Finite Element Analysis on the Deformation of Energy-Saving Wire-Mesh Frame Wallboard

2014 ◽  
Vol 501-504 ◽  
pp. 731-735
Author(s):  
Li Zhang ◽  
Kang Li
Keyword(s):  
Finite Element ◽  
Energy Saving ◽  
Theoretical Basis ◽  
Steel Wire ◽  
Wire Mesh ◽  
Design Parameters ◽  
Element Analysis ◽  
Finite Element Program ◽  
Element Program ◽  
Influence Degree

This paper analyzes the influence degree of related design parameters of wire-mesh frame wallboard on deformation through finite element program, providing theoretical basis for the design and test of steel wire rack energy-saving wallboard.

Sign in / Sign up

Export Citation Format

Share Document