scholarly journals Bioremediation of Nitrite from Brackishwater Using Lignocellulosic Agricultural Waste – Bagasse

2007 ◽  
Vol 19 (4) ◽  
Author(s):  
KISHORE K. KRISHNANI ◽  
V. PARIMALA ◽  
B.P. GUPTA ◽  
I.S. AZAD ◽  
M.S. SHEKHAR

Bagasse is a complex native lignocellulosic agricultural waste left after extraction of juice from sugar cane in sugar mills. Bagasse is commonly used as a captive boiler fuel aside from its minor use as a raw material in the paper industry and in low-value products. There remains an ever present need to convert this material to useful value added products, which is an objective of our continued research. The aim of the present study is to investigate four different materials prepared from bagasse for the removal of nitrite from shrimp farm brackishwater (salinity 27±1 ppt) in laboratory condition. The experimental results showed that nitrite removal is effective using bagasse materials with the dose of 1 and 3 g•L-1. Raw bagasse fiber was found to be most effective followed by dried bagasse powder, which can be attributed to the rapid increase in bacterial counts and periphytic growth combined with ion exchange mechanism. Effect of bagasse materials on other water characteristics such as pH, salinity, alkalinity, dissolved oxygen, ammonia and phosphates has also been studied. The very low cost of lignocellulosic materials is a real advantage that renders it as a suitable alternative for the remediation of nitrite from aquaculture water.

PeerJ ◽  
2019 ◽  
Vol 6 ◽  
pp. e6186 ◽  
Author(s):  
Ting-Ting Jiang ◽  
Yan Liang ◽  
Xiang Zhou ◽  
Zi-Wei Shi ◽  
Zhi-Jun Xin

Background Sweet sorghum bagasse (SSB), comprising both a dermal layer and pith, is a solid waste generated by agricultural activities. Open burning was previously used to treat agricultural solid waste but is harmful to the environment and human health. Recent reports showed that certain techniques can convert this agricultural waste into valuable products. While SSB has been considered an attractive raw material for sugar extraction and the production of value-added products, the pith root in the SSB can be difficult to process. Therefore, it is necessary to pretreat bagasse before conventional hydrolysis. Methods A thorough analysis and comparison of various pretreatment methods were conducted based on physicochemical and microscopic approaches. The responses of agricultural SSB stem pith with different particle sizes to pretreatment temperature, acid and alkali concentration and enzyme dosage were investigated to determine the optimal pretreatment. The integrated methods are beneficial to the utilization of carbohydrate-based and unknown compounds in agricultural solid waste. Results Acid (1.5−4.5%, v/v) and alkali (5−8%, w/v) reagents were used to collect cellulose from different meshes of pith at 25–100 °C. The results showed that the use of 100 mesh pith soaked in 8% (w/v) NaOH solution at 100 °C resulted in 32.47% ± 0.01% solid recovery. Follow-up fermentation with 3% (v/v) acid and 6.5% (w/v) alkali at 50 °C for enzymolysis was performed with the optimal enzyme ratio. An analysis of the surface topography and porosity before and after pretreatment showed that both the pore size of the pith and the amount of exposed cellulose increased as the mesh size increased. Interestingly, various compounds, including 42 compounds previously known to be present and 13 compounds not previously known to be present, were detected in the pretreatment liquid, while 10 types of monosaccharides, including D-glucose, D-xylose and D-arabinose, were found in the enzymatic solution. The total monosaccharide content of the pith was 149.48 ± 0.3 mg/g dry matter. Discussion An integrated technique for obtaining value-added products from sweet sorghum pith is presented in this work. Based on this technique, lignin and hemicellulose were effectively broken down, amorphous cellulose was obtained and all sugars in the sweet sorghum pith were hydrolysed into monosaccharides. A total of 42 compounds previously found in these materials, including alcohol, ester, acid, alkene, aldehyde ketone, alkene, phenolic and benzene ring compounds, were detected in the pretreatment pith. In addition, several compounds that had not been previously observed in these materials were found in the pretreatment solution. These findings will improve the transformation of lignocellulosic biomass into sugar to create a high-value-added coproduct during the integrated process and to maximize the potential utilization of agricultural waste in current biorefinery processing.


2021 ◽  
Vol 4 ◽  
Author(s):  
Debomitra Dey ◽  
Jana K. Richter ◽  
Pichmony Ek ◽  
Bon-Jae Gu ◽  
Girish M. Ganjyal

The processing of agricultural products into value-added food products yields numerous by-products or waste streams such as pomace (fruit and vegetable processing), hull/bran (grain milling), meal/cake (oil extraction), bagasse (sugar processing), brewer's spent grain (brewing), cottonseed meal (cotton processing), among others. In the past, significant work in exploring the possibility of the utilization of these by-products has been performed. Most by-products are highly nutritious and can be excellent low-cost sources of dietary fiber, proteins, and bioactive compounds such as polyphenols, antioxidants, and vitamins. The amount of energy utilized for the disposal of these materials is far less than the energy required for the purification of these materials for valorization. Thus, in many cases, these materials go to waste or landfill. Studies have been conducted to incorporate the by-products into different foods in order to promote their utilization and tackle their environmental impacts. Extrusion processing can be an excellent avenue for the utilization of these by-products in foods. Extrusion is a widely used thermo-mechanical process due to its versatility, flexibility, high production rate, low cost, and energy efficiency. Extruded products such as direct-expanded products, breakfast cereals, and pasta have been developed by researchers using agricultural by-products. The different by-products have a wide range of characteristics in terms of chemical composition and functional properties, affecting the final products in extrusion processing. For the practical applications of these by-products in extrusion, it is crucial to understand their impacts on the qualities of raw material blends and extruded products. This review summarizes the general differences in the properties of food by-products from different sources (proximate compositions, physicochemical properties, and functional properties) and how these properties and the extrusion processing conditions influence the product characteristics. The discussion of the by-product properties and their impacts on the extrudates and their nutritional profile can be useful for food manufacturers and researchers to expand their applications. The gaps in the literature have been highlighted for further research and better utilization of by-products with extrusion processing.


Agronomy ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2221
Author(s):  
Adila Fazliyana Aili Hamzah ◽  
Muhammad Hazwan Hamzah ◽  
Hasfalina Che Man ◽  
Nur Syakina Jamali ◽  
Shamsul Izhar Siajam ◽  
...  

Pineapple waste accounts for a significant part of waste accumulated in landfill which will further contribute to the release of greenhouse gases. With the rising pineapple demands worldwide, the abundance of pineapple waste and its disposal techniques are a major concern. Exploiting the pineapple waste into valuable products could be the most sustainable way of managing these residues due to their useful properties and compositions. In this review, we concentrated on producing useful products from on-farm pineapple waste and processing waste. Bioenergy is the most suitable option for green energy to encounter the increasing demand for renewable energy and promotes sustainable development for agricultural waste. The presence of protease enzyme in pineapple waste makes it a suitable raw material for bromelain production. The high cellulose content present in pineapple waste has a potential for the production of cellulose nanocrystals, biodegradable packaging and bio-adsorbent, and can potentially be applied in the polymer, food and textile industries. Other than that, it is also a suitable substrate for the production of wine, vinegar and organic acid due to its high sugar content, especially from the peel wastes. The potentials of bioenergy production through biofuels (bioethanol, biobutanol and biodiesel) and biogas (biomethane and biohydrogen) were also assessed. The commercial use of pineapples is also highlighted. Despite the opportunities, future perspectives and challenges concerning pineapple waste utilisation to value-added goods were also addressed. Pineapple waste conversions have shown to reduce waste generation, and the products derived from the conversion would support the waste-to-wealth concept.


Author(s):  
Irina A. Chetvertneva ◽  
Oleg Kh. Karimov ◽  
Galina A. Teptereva ◽  
Natalia S. Tivas ◽  
Eldar M. Movsumzade ◽  
...  

The paper considers the main components and products of wood processing, agricultural waste, pulp and paper industry waste and qualifies them as sources of pentose-containing resource-renewable domestic raw materials. The article describes in detail the structural components of wood as a natural polymer, which contains aromatic and carbohydrate parts. It is noted that these poly-mers are promising as raw materials for the production of useful chemical products. The role of lignin, cellolose and hemicellulose in the design of mechanical and structural properties of wood is considered. The article considers the features of the sulfonation reactions of the lignin monomer unit depending on the pH of the medium: acidic, neutral and alkaline. There are three main reac-tions that occur simultaneously with lignin in the process of wood delignification during sulfite cooking, such as the sulfonation reaction, the hydrolytic destruction reaction, and the condensation reaction. It is shown that the lignin-hemicellulose matrix contains three types of interconnected mesh structures: the lignin itself; a network of covalent bonds of lignin with hemicelluloses, and a network whose structure is obtained due to the hydrogen bond and the forces of the physical inter-action of lignin and hemicelluloses. The features of chemical transformations of the monomeric aromatic link of lignosulfonate – phenylpropane unit in the processes of wood delignification, the main chemical reactions of wood raw material delignification under the conditions of sulfite and neutral-sulfite brews are shown. The method of quantitative determination of monosaccharides in the composition of the carbohydrate part is proposed.


Author(s):  
Abhinav Shandilya ◽  
Ayush Gupta ◽  
Deepak Verma

The growing awareness about sustainable development, environmental ecology and new legislations has led researchers to focus attention on bio fibres reinforced composites. In this field research has been done on many fibres but fibres such as banana, coir, bagasse, jute have gained importance in the recent decades. The main advantage of the natural fibre based composites materials being their low cost, easy availability, low density, acceptable specific properties, ease of separation, enhanced energy recovery, C02 neutrality, biodegradability and recyclability in nature. The attention is being given to the development of natural fibre composites is to explore value-added application avenues for their use and also for a sustainable and economical use of easily available natural material in hand. Agricultural waste is a very good example of such naturally available material and it can also be used to prepare composite materials for commercial use this has a very significant advantage over other natural fibres as its abundance and because of almost no cost.


2018 ◽  
Vol 5 (4) ◽  
pp. 93 ◽  
Author(s):  
Rajeev Ravindran ◽  
Shady Hassan ◽  
Gwilym Williams ◽  
Amit Jaiswal

Agro-industrial waste is highly nutritious in nature and facilitates microbial growth. Most agricultural wastes are lignocellulosic in nature; a large fraction of it is composed of carbohydrates. Agricultural residues can thus be used for the production of various value-added products, such as industrially important enzymes. Agro-industrial wastes, such as sugar cane bagasse, corn cob and rice bran, have been widely investigated via different fermentation strategies for the production of enzymes. Solid-state fermentation holds much potential compared with submerged fermentation methods for the utilization of agro-based wastes for enzyme production. This is because the physical–chemical nature of many lignocellulosic substrates naturally lends itself to solid phase culture, and thereby represents a means to reap the acknowledged potential of this fermentation method. Recent studies have shown that pretreatment technologies can greatly enhance enzyme yields by several fold. This article gives an overview of how agricultural waste can be productively harnessed as a raw material for fermentation. Furthermore, a detailed analysis of studies conducted in the production of different commercially important enzymes using lignocellulosic food waste has been provided.


Author(s):  
Лемешева ◽  
E. Lemesheva ◽  
Кочегаров ◽  
D. Kochegarov ◽  
Тихомиров ◽  
...  

The growing demand for alternative motor fuels is dictated by aggravating energy and environmental problems. In article the analysis about possibility of use of alternative types of fuel for vehicles is carried out. Application of suitable alternative types of fuel will allow to improve in the future an economic and ecological situation in the country. Alternative fuel has to conform to the following requirements: to have necessary raw material resources, low cost, not to worsen operation of the engine, it is as little as possible to throw out harmful substances, whenever possible to be combined with the developed system of supply with fuel, etc. It is shown that natural gas and fuels derived from vegetable oils are most economical to use


2021 ◽  
Author(s):  
Athar Hussain ◽  
Sangeeta Madan ◽  
Richa Madan

Adsorption processes are extensively used in wastewater treatment for heavy metal removal. The most widely used adsorbent is activated carbon giving the best of results but it’s high cost limits its use. It has a high cost of production and regeneration. As the world today faces a shortage of freshwater resources, it is inevitable to look for alternatives that lessen the burden on existing resources. Also, heavy metals are toxic even in trace concentrations, so an environmentally safe method of their removal necessitated the requirement of low cost adsorbents. Adsorption is a cost-effective technique and gained recognition due to its minimum waste disposal advantage. This chapter focuses on the process of adsorption and the types of adsorbent available today. It also encompasses the low-cost adsorbents ranging from agricultural waste to industrial waste explaining the adsorption reaction condition. The cost-effectiveness, technical applicability and easy availability of raw material with low negative impact on the system are the precursors in selecting the adsorbents. The novelty of the chapter lies in covering a wide range of adsorbents with their efficiency in removal of heavy metals from wastewater.


2021 ◽  
Vol 13 (20) ◽  
pp. 11432
Author(s):  
Muhammad Azri Amran ◽  
Kishneth Palaniveloo ◽  
Rosmadi Fauzi ◽  
Nurulhuda Mohd Satar ◽  
Taznim Begam Mohd Mohidin ◽  
...  

The agricultural sector generates approximately 1300 million tonnes of waste annually, where up to 50% comprising of raw material are discarded without treatment. Economic development and rising living standards have increased the quantity and complexity of waste generated resulting in environmental, health and economic issues. This calls for a greener waste management system such as valorization or recovery of waste into products. For successful implementation, social acceptance is an essential component with involvement of all local stakeholders including community to learn and understand the process and objective of the implementation. The agricultural waste product manufacturing industry is expected to increase with the growing demand for organic food. Thus, proper livestock and crop waste management is vital for environmental protection. It will be essential to successfully convert waste into a sustainable product that is reusable and circulated in the system in line with the green concept of circular economy. This review identifies the commercially produced crops by-product that have been considered for valorization and implemented green extraction for recovery. We highlight the importance of social acceptance and the economic value to agricultural waste recycling. Successful implementation of these technologies will overcome current waste management problems, reduce environmental impacts of landfills, and sustainability issue for farm owners.


Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 711 ◽  
Author(s):  
Yingying Wen ◽  
Yong Ji ◽  
Shifeng Zhang ◽  
Jie Zhang ◽  
Gaotang Cai

The fabrication of functional lignocellulose-based materials has drawn considerable attention because it acts as a green separation/absorption material owing to its multi-porous mesostructure. In this study, a surface functionalized lignocellulose-based adsorbent for the highly efficient capture of Cd(II) ions was prepared through facile in situ co-deposition of wood waste-derived saw powder (SP) in the presence of tannic acid (TA) and aminopropyltriethoxysilane (APTES) mixed aqueous solution. The SP was first modified using TA-APTES coating to synthesize the functional SP substrate (SP-(TA-APTES)). The SP-(TA-APTES) hybrids served as reactive platforms, which enabled further decoration with amino-rich polyethylenimine (PEI) due to the outstanding secondary reactions of the TA-APTES layer. The surface morphology of the resulting SP-(TA-APTES)-PEI (SP-TAPI) composites were investigated using Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Significantly, the combined advantages of the lignocellulosic skeleton, the layer-particle structure, and the hybrid coating contributed to the enhanced adsorption capacity of Cd(II) (up to 22.66 mg/g at pH = 5.0). This removal capacity was higher than that of most reported agricultural waste-based or lignocellulose-based materials. The Cd(II) adsorption mechanism of the surface-modified SP-TAPI composites was studied in detail. These results provide new insights into the high value-added utilization of agricultural waste for water purification applications.


Sign in / Sign up

Export Citation Format

Share Document