scholarly journals Implementación del OEE en el proceso de fabricación de vidrio templado

2019 ◽  
pp. 11-21
Author(s):  
Martín González-Sóbal ◽  
Luis Antonio Calderón-Palomares
Keyword(s):  
Manufacturing Process ◽  
Global Scale ◽  
Previous Measurement ◽  
High Potential ◽  
Tempered Glass ◽  
Production Lines ◽  
Lighting Conditions ◽  
Equipment Availability ◽  
Cutting Equipment

Objective: Implement the OEE as an indicator that allows evaluating and improving the manufacturing process of tempered glass. Methodology: Production lines are analyzed to determine the indexes: availability, pace and quality. A first evaluation is obtained, with an overall yield of 35% for the month of October 2018, this result places the production lines in a range of “unacceptable” on the global scale of said index, which implies that the organization It has a high potential for improvement. It is at this point that strategies are determined that will improve said performance. Firstly, the process flows of both lines are analyzed, identifying areas for improvement and simplifying manufacturing stages, which allows to optimize production times and equipment availability, a second action was the modification of the cutting equipment, allowing three processes to be processed Part types, without the need to make changes to the tool, which reduces preparation times. Finally, the lighting conditions were evaluated and improved, with this we reduce the inspection times in the quality of the product. Contribution: The actions implemented allowed obtaining an increase of 5% of the OEE, in relation to the previous measurement.

Application Of Cusum Chart In Control Of Paper Quality

GIS Business ◽  
2020 ◽  
Vol 14 (6) ◽  
pp. 1062-1069
Author(s):  
S.Ramesh ◽  
B.A.Vasu
Keyword(s):  
Process Parameters ◽  
Manufacturing Process ◽  
Paper Industry ◽  
Primary Data ◽  
Cusum Chart ◽  
Paper Machine ◽  
Statistical Control ◽  
Operating Characteristics ◽  
Small Shift

This paper is an attempt to assess if the manufacturing process of paper machine is in statistical control thereby improving the quality of paper being produced in a paper industry at the time of process itself. Quality is the foremost criteria for achieving the business target. Therefore, emphasis was made on controlling the quality of paper at the time of manufacturing process itself, rather than checking the finished lots at a later time.  This control on quality will help the industry deduct the small shift in the process parameters and modify the operating characteristics at the time of production itself rather than receiving complaints from customers at a later stage.  This paper describes controlling quality at the time of manufacture itself and helps the industry to concentrate on quality at low cost. The researcher has collected primary data at a leading paper industry during October, 2019.  Though X-bar and Range charges were primarily used, CUSUM charts were used to sense the minor shifts in manufacturing process, to explore the possibility of adjusting process parameters during manufacture of paper.

Influence of mineral elements on the yield and quality of grain of the prospective line in winter tritikale

2020 ◽  
Author(s):  
I.N. Voronchikhina ◽  
◽  
A.G. Marenkova ◽  
V. S. Rubets ◽  
V. V. Pylnev
Keyword(s):  
Cost Effective ◽  
Mineral Elements ◽  
Early Spring ◽  
High Potential ◽  
Winter Triticale ◽  
Yield And Quality ◽  
Fertilizer System

The results of elements development of varietal agrotechnics of a new high-potential line 238h of winter triticale presented. It was identified that under the conditions of 2020 the most cost effective fertilizer system is an early spring application of NPK (S) (15-15-15 (10)) at a dose of 200kg/ha. The profitability level of this fertilizer was 88,9%.

scholarly journals Porosity Analysis of Additive Manufactured Parts Using CAQ Technology

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1142
Author(s):  
Peter Pokorný ◽  
Štefan Václav ◽  
Jana Petru ◽  
Michaela Kritikos
Keyword(s):  
Manufacturing Process ◽  
Scanning Speed ◽  
Additive Technologies ◽  
Integration Time ◽  
Detector Resolution ◽  
Porosity Analysis ◽  
3D Scans ◽  
Printing Direction ◽  
Non Destructive

Components produced by additive technology are implemented in various spheres of industry, such as automotive or aerospace. This manufacturing process can lead to making highly optimized parts. There is not enough information about the quality of the parts produced by additive technologies, especially those made from metal powder. The research in this article deals with the porosity of components produced by additive technologies. The components used for the research were manufactured by the selective laser melting (SLM) method. The shape of these components is the same as the shape used for the tensile test. The investigated parts were printed with orientation in two directions, Z and XZ with respect to the machine platform. The printing strategy was “stripe”. The material used for printing of the parts was SS 316L-0407. The printing parameters were laser power of 200 W, scanning speed of 650 mm/s, and the thickness of the layer was 50 µm. A non-destructive method was used for the components’ porosity evaluation. The scanning was performed by CT machine METROTOM 1500. The radiation parameters used for getting 3D scans were voltage 180 kV, current 900 µA, detector resolution 1024 × 1024 px, voxel size 119.43 µm, number of projections 1050, and integration time 2000 ms. This entire measurement process responds to the computer aided quality (CAQ) technology. VG studio MAX 3.0 software was used to evaluate the obtained data. The porosity of the parts with Z and XZ orientation was also evaluated for parts’ thicknesses of 1, 2, and 3 mm, respectively. It has been proven by this experimental investigation that the printing direction of the part in the additive manufacturing process under question affects its porosity.

The First Very Broadband Mediterranean Network: 30 Yr of Data and Seismological Research

2019 ◽  
Vol 91 (2A) ◽  
pp. 787-802
Author(s):  
Silvia Pondrelli ◽  
Francesca Di Luccio ◽  
Laura Scognamiglio ◽  
Irene Molinari ◽  
Simone Salimbeni ◽  
...  
Keyword(s):  
Seismic Source ◽  
Global Scale ◽  
Anthropogenic Noise ◽  
Earth Structure ◽  
Backbone Network ◽  
Early Adoption ◽  
Stable Conditions ◽  
Remote Sites ◽  
The Mediterranean

Abstract Starting in 1988, with the installation of the first broadband (BB) instrument in Italy, the Mediterranean Very Broadband Seismographic Network (MedNet) program established a backbone network of BB stations of the highest quality in the Mediterranean Sea countries. The Mediterranean region is characterized by relevant and frequent seismicity related to its complex tectonics, due to the convergence of two major plates, Africa and Eurasia, and the involvement of other minor plates, as the Adriatic plate. Therefore, the MedNet project became a scientific research infrastructure of excellence, able to fill the gap of regional coverage when the availability of seismic BB instruments was still scarce. The main characteristics of the MedNet network are the highest quality of the seismographic instrumentation at remote sites and very low level of anthropogenic noise with stable conditions of pressure and temperature. After 30 yr of recordings, the MedNet program has proven that the early adoption of very BB instruments in selected sites have been the best choice. A large number of studies benefited from MedNet data, as seismic source computation and Earth structure reconstruction, at local and global scale. We present a concise overview of the contribution given by MedNet data in the last three decades to motivate and financially support the existence of this valuable infrastructure, and to further maintain this project.

Optimal Parameter Design of Solder Residue in Flip Chip Process by Using Taguchi Method

2010 ◽  
Vol 443 ◽  
pp. 543-548
Author(s):  
Jian Long Kuo ◽  
Kai Lun Chao ◽  
Chun Cheng Kuo
Keyword(s):  
Taguchi Method ◽  
Product Quality ◽  
Manufacturing Process ◽  
Flip Chip ◽  
Optimal Parameter ◽  
Experimental Testing ◽  
Signal To Noise Ratio ◽  
Optimal Solution ◽  
Passive Component

Because the solder residue was found in the manufacturing process which greatly affected the product quality, the purpose of this paper was to make the product quality improved and to find an optimal solution for process parameters in the flip chip process. The experimental testing was based on SMT manufacturing process. The amount and size of solder left on passive component in the process of manufacturing were considered as the quality traits. Since too many solders left on the passive component side during flux cleaning process, it was possible that the balling would be flowed into the chip, which caused the bump short in the chip and affected the quality of the product. In this paper, orthogonal array by using Taguchi method is adopted as the effective experimental method with the least experimental runs. Also, based on the quality evaluation of signal-to-noise ratio, the ANOVA is used to evaluate the effects of quality target according to the experimental results. The results reveal that the optimization in the process is confirmed. Therefore, this study can effectively improve the solder residue in semiconductor manufacturing process.

Experimental study of mild steel cutting process by using the plasma arc method

2021 ◽  
Vol 108 (2) ◽  
pp. 75-85
Author(s):  
H.M. Magid
Keyword(s):  
Industrial Process ◽  
Scanning Speed ◽  
Cutting Parameters ◽  
Operating Conditions ◽  
Kerf Width ◽  
Cutting Process ◽  
Plasma Cutting ◽  
Plasma Arc ◽  
Cutting Equipment

Purpose: In this study, plasma arc cutting (PAC) is an industrial process widely used for cutting various away types of metals in several operating conditions. Design/methodology/approach: It is carried out a systematic or an authoritative inquiry to discover and examine the fact, the plasma cutting process is to establish the accuracy and the quality of the cut in this current paper assessed a good away to better the cutting process. Findings: It found that the effect of parameters on the cutting quality than on the results performed to accomplish by statistical analysis. Research limitations/implications: The objective of the present work paper is to achieve cutting parameters, thus the quality of the cutting process depends upon the plasma gas pressure, scanning speed, cutting power, and cutting height. Practical implications: The product of the plasma cutting process experimentally has been the quality of the cutting equipment that was installed to monitor kerf width quality by exam the edge roughness, kerf width, and the size of the heat-affected zone (HAZ). Originality/value: The results reveal that were technically possessed of including all the relevant characteristics, then a quality control for the cutting and describe the consequence of the process parameters.

What's the Buzz? The Neuroscience and the Treatment of Tinnitus

2021 ◽  
Author(s):  
Amanda Henton ◽  
Thanos Tzounopoulos
Keyword(s):  
United States ◽  
The United States ◽  
Global Scale ◽  
Current Treatment ◽  
Public Health Issue ◽  
Current State ◽  
Acquired Hearing Loss ◽  
Neurophysiological Mechanisms ◽  
Necessary And Sufficient

Tinnitus is a pervasive public health issue that affects approximately 15% of the United States population. Similar estimates have also been shown on a global scale, with similar prevalence found in Europe, Asia, and Africa. The severity of tinnitus is heterogeneous, ranging from mildly bothersome to extremely disruptive. In the United States, approximately 10-20% of individuals who experience tinnitus report symptoms that severely reduce their quality of life. Due to the huge personal and societal burden, in the last twenty years a concerted effort on basic and clinical research has significantly advanced our understanding and treatment of this disorder. Yet, neither full understanding, nor cure exists. We know that tinnitus is the persistent involuntary phantom percept of internally-generated non-verbal noises and tones, which in most cases is initiated, by acquired hearing loss and maintained only when this loss is coupled with distinct neuronal changes in auditory and extra-auditory brain networks. Yet, the exact mechanisms and patterns of neural activity that are necessary and sufficient for the perceptual generation and maintenance of tinnitus remain incompletely understood. Combinations of animal model and human research will be essential in filling these gaps. Nevertheless, the existing progress in investigating the neurophysiological mechanisms has improved current treatment and highlighted novel targets for drug development and clinical trials. The aim of this review is to thoroughly discuss the current state of human and animal tinnitus research, outline current challenges, and highlight new and exciting research opportunities.

Quality of moxa wool contained in commercial moxibustion devices: test method and examples of waste particle concentration

2020 ◽  
pp. 096452842094604
Author(s):  
O Sang Kwon ◽  
Seong Jin Cho ◽  
Kwang-Ho Choi ◽  
Suk-Yun Kang ◽  
Suyeon Seo ◽  
...  
Keyword(s):  
Manufacturing Process ◽  
Particle Concentration ◽  
Scale Validation ◽  
Chemical Stimulation ◽  
Indirect Moxibustion ◽  
Test Method ◽  
Direct Moxibustion ◽  
Wool Quality ◽  
Waste Particles

Background: Moxibustion treatment involves a combination of thermal and chemical stimulation applied by the combustion of moxa wool. The quality of moxa wool is considered to be an important factor in moxibustion treatment traditionally and clinically. However, despite its importance, quantitative and objective methods for determining moxa wool quality are lacking. Methods: Moxa wool and commercial indirect moxibustion (CIM) device specimens were randomly collected, dried and strained through sieves of various sizes for 10 h. After sieving, the residues remaining on each sieve were collected. The collected samples were weighed and microscopically observed. Results: In this study, we observed that fibres mainly remained on sieves sized 425 μm, and particles were smaller than 300 μm. The residues between 425 and 300 μm varied between the products. In addition, moxa wool for direct moxibustion (DMW) exhibited significantly more fibres than moxa wool for indirect moxibustion (IMW). Most of the CIM devices using moxa wool had a quality similar to IMW, except for one CIM brand using moxa wool that contained three times more waste particles than IMW. Conclusion: Based on the results of this study, we conclude that the sieving method is useful for testing the quality of moxa wool even after the CIM manufacturing process. The sieve sizes of 425 and 300 μm could be used as a yardstick to determine the quality of moxa wool. Although this approach requires larger scale validation against existing standard methodologies, we believe it has great potential to be used to improve and safeguard the quality of moxa wool contained in commercial moxibustion devices.

scholarly journals Features of parasitocenosis in eimeriosis in young ruminants

2021 ◽  
Vol 0 (14) ◽  
pp. 91-100
Author(s):  
Vera Usevich ◽  
N. Kurochkina ◽  
M. Drozd ◽  
Ol'ga Petrova
Keyword(s):  
Comparative Evaluation ◽  
Animal Species ◽  
Treatment Time ◽  
Global Scale ◽  
Laboratory Diagnostics ◽  
Therapeutic Effectiveness ◽  
Treatment And Prevention ◽  
Traditional Remedies ◽  
Eimeria Arloingi

Abstract. The prevalence of coccidiosis diseases of various animal species has a global scale, so this problem has attracted the attention of veterinary specialists around the world. The purpose of this study was to study the specific features of the species composition and laboratory diagnostics of eimeriosis in young ruminants and to evaluate the effectiveness of treatment and prevention when using drugs from different groups. The material for the study was goats and calves. The research was carried out on the basis of two farms of the same agricultural holding in the Sverdlovsk region. Diagnostics was performed based on clinical and laboratory studies. Results of the study. The main pathogens in the goat breeding complex in goats of different ages were identified: the main causative agent of coccidiosis in 120-day-old goats was Eimeria arloingi, which accounted for 54 % of all detected oocysts in the samples. Eimeriosis occurred as a mixed invasion of Eimeria arloingi with Eimeria ninaekohlyakimovae (33 %) and Eimeria intracata (13 %). Eimeria arloingi (68 %), in 21-days-old goats – Eimeria ninaekohlyakimovae (32 %). Eimeriosis caused by Eimeria bovis was detected in 30-days-old calves (100 %). The article describes the results of using various anticoccidial drugs in the treatment and prevention of eimeriosis. A comparative evaluation of the therapeutic effectiveness of known coccidiostatics is given. The economic efficiency of different groups of drugs was evaluated. The scientific novelty lies in the fact that the morphological and quantitative assessment of parasitocenoses in eimeriosis in young ruminants was carried out. A comparative evaluation of the effectiveness of various traditional remedies and a new drug for the treatment of eimeriosis in calves and goats was carried out. Conclusion. Not all of the drugs used have the same therapeutic effectiveness both in terms of treatment time and the quality of elimination of the etiological factor.

scholarly journals Data heterogeneity and oldness, two difficulties to overcome for the world seabed sediment mapping

2021 ◽  
Vol 4 ◽  
pp. 1-7
Author(s):  
Thierry Garlan ◽  
Isabelle Gabelotaud ◽  
Elodie Marchès ◽  
Edith Le Borgne ◽  
Sylvain Lucas
Keyword(s):  
Global Scale ◽  
Single Product ◽  
Seabed Sediment ◽  
Bathymetric Data ◽  
The World ◽  
Data Heterogeneity ◽  
Sediment Data ◽  
The University ◽  
Seabed Sediments

Abstract. A global seabed sediment map has been developed since 1995 to provide a necessary tool for different needs. This project is not completely original since it had already been done in 1912 when the French hydrographic Office and the University of Nancy produced sedimentary maps of the European and North American coasts. Seabed sediments is one of the last geographical domains which can’t benefit of satellite data. Without this contribution, sediment maps need to use very old data mixed with the new ones to be able to reach the goal of a global map. In general, sediment maps are made with the latest available techniques and are replaced after a few decades, thus generating new cartographic works as if all the previous efforts had become useless. Such approach underestimates the quality of past works and prevents to have maps covering large areas. The present work suggests to standardize all kind of sedimentary data from different periods and from very different acquisition systems and integrate them into a single product. This process has already been done for bathymetric data of marine charts, we discuss in this article of the application of this method at a global scale for sediment data.

Sign in / Sign up

Export Citation Format

Share Document