scholarly journals Sensory and compression evaluation of facial powders obtained by different manufacturing processes

2019 ◽  
Vol 12 (6) ◽  
pp. 127
Author(s):  
A. M. Ribeiro ◽  
M. C. Baptista ◽  
M. N. Aihara ◽  
T. M. P. Toledo ◽  
T. F. B. X. Silva ◽  
...  
Keyword(s):  
Particle Size ◽  
Sensory Evaluation ◽  
Sensory Analysis ◽  
Consumer Preferences ◽  
Raw Materials ◽  
Drop Test ◽  
Manufacturing Processes ◽  
Hammer Mill ◽  
Compression Tests ◽  
Mill Addition

The aim of this study was to evaluate different manufacturing processes of compact powders and establish consumer preferences through sensory analysis. Four compact powders were formulated with the following treatments: micronization, hammer mill, addition of raw materials that modify the sensory, and simple mixture. The powders were compressed, passing the tests for glazing, detachment of color and drop test, and later forwarded to sensory evaluation by 45 volunteers. In the compression tests, drop test, glazing and detachment of color, the micronized sample obtained the best results showing the reduction of particle size influences the packaging of powders and improves the compression of the product, but in the sensory analysis the sample obtained by simple mixture was the preference of most of the volunteers. It was felt that, despite the best compaction results are obtained for samples micronized, the preference of the volunteers is still linked to older manufacturing processes where the resulting powder shows more coarse and form a thicker layer on the skin.

scholarly journals Effect of sweet yeast bread formula on evaluating rapid mix test

2011 ◽  
Vol 59 (5) ◽  
pp. 39-46
Author(s):  
Petra Dvořáková ◽  
Jindřiška Kučerová ◽  
Stanislav Kráčmar
Keyword(s):  
Sensory Analysis ◽  
Consumer Preferences ◽  
Raw Materials ◽  
Binding Capacity ◽  
Yeast Fermentation ◽  
Bread Making ◽  
Basic Formula ◽  
Fermentation Test ◽  
Bakery Industry ◽  
Ground Wheat

The aim of this work was to detect how different sweet yeast bread formulas influence results of rapid mix test and by the help of sensory analysis to discover consumer preferences and possible benefit and use in bakery industry. Applied raw materials (ground wheat flour T 530, yeast, sugar, salt, oil, egg, improver Hit) along with basic formula were taken from the Varmužova bakery in Boršice by Buchlovice. The basic formula served as a standard (I), other six formulas were then determined (II–VII). In each formula, the rate of yeast, sugar or oil was altered in the range of ± 10% compared with the standard. Flour bread-making quality – Hagberg Falling number [s], Sedimentation index [ml], wet gluten [%], ash [%], moisture [%], binding capacity [%], granulation [%], alveographic energy [10−4J] and alveographic rate P/L – was measured. Rapid mix test and parameters like pastry weight, volume, shape, dough yield, pastry yield, baking loss, penetration and sensory analysis were determined. To establish yeast fermentation activity, Engelke fermentation test was applied. The most evident differences among the samples appeared in the volume and shape. The results of sensory analysis showed that the samples with higher rate of altered raw materials were evaluated as the best.

scholarly journals Optimation and Sensory Profile of Functional Drink from Cinnamon and Cardamom

2020 ◽  
Vol 4 (2) ◽  
pp. 189-195
Author(s):  
Mardiana Mardiana ◽  
Novriza Sativa ◽  
Hari Hariadi ◽  
Nanda Triandita ◽  
Nela Eska Putri
Keyword(s):  
Moisture Content ◽  
Sensory Evaluation ◽  
Sensory Analysis ◽  
Raw Materials ◽  
Ash Content ◽  
Sensory Profile ◽  
Amomum Compactum ◽  
Functional Drink ◽  
Maximum Moisture Content

Functional drinks can be made from local herbal ingredients that are often used for spices such as cinnamon (Cinnamomum burmanni) and cardamom (Amomum compactum). The purpose of this study is to determine the best formulation of cinnamon and cardamon as a herbal drink based on moisture content, ash content , and sensory evaluation. Raw materials were dried at 50 °C until reached a maximum moisture content 10% and were reduced in size. The formulations were made of comparison between cinnamon and cardamom which were A (100: 0)%; B (80:20)%; C (60:40)%; D (50:50)%; E (40:60)%; F (20:80)%; and G (0: 100)%. The moisture content of all formulas is between 7.12-7.33% (<10%) and the ash content of all formulas is between 4.83-5.06%. The results of sensory analysis showed that formula B had the best acceptance for color (3.03) and aroma (3.17). Thisproducthad moisture 7.23 % and ash content 4.83 %.

Microstructural characterization of laser-melted/roller-quenched dicalcium silicate

1988 ◽  
Vol 46 ◽  
pp. 582-583
Author(s):  
C. J. Chan ◽  
K. R. Venkatachari ◽  
W. M. Kriven ◽  
J. F. Young
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Shape Change ◽  
Microstructural Characterization ◽  
Particle Size Effect ◽  
Dicalcium Silicate ◽  
Laser Melting ◽  
Uniform Size ◽  
Cell Shape Change ◽  
Wide Range

Dicalcium silicate (Ca2SiO4) is a major component of Portland cement. It has also been investigated as a potential transformation toughener alternative to zirconia. It has five polymorphs: α, α'H, α'L, β and γ. Of interest is the β-to-γ transformation on cooling at about 490°C. This transformation, accompanied by a 12% volume increase and a 4.6° unit cell shape change, is analogous to the tetragonal-to-monoclinic transformation in zirconia. Due to the processing methods used, previous studies into the particle size effect were limited by a wide range of particle size distribution. In an attempt to obtain a more uniform size, a fast quench rate involving a laser-melting/roller-quenching technique was investigated.The laser-melting/roller-quenching experiment used precompacted bars of stoichiometric γ-Ca2SiO4 powder, which were synthesized from AR grade CaCO3 and SiO2xH2O. The raw materials were mixed by conventional ceramic processing techniques, and sintered at 1450°C. The dusted γ-Ca2SiO4 powder was uniaxially pressed into 0.4 cm x 0.4 cm x 4 cm bars under 34 MPa and cold isostatically pressed under 172 MPa. The γ-Ca2SiO4 bars were melted by a 10 KW-CO2 laser.

scholarly journals Time-Dependent Strength Behavior, Expansion, Microstructural Properties, and Environmental Impact of Basic Oxygen Furnace Slag-Treated Marine-Dredged Clay in South Korea

2021 ◽  
Vol 13 (9) ◽  
pp. 5026
Author(s):  
Gyeong-o Kang ◽  
Jung-goo Kang ◽  
Jin-young Kim ◽  
Young-sang Kim
Keyword(s):  
Particle Size ◽  
Environmental Impact ◽  
South Korea ◽  
Mechanical Characteristics ◽  
Basic Oxygen Furnace ◽  
Microstructural Properties ◽  
Compression Tests ◽  
Basic Oxygen ◽  
Strength Behavior ◽  
Bof Slag

The aim of this study was to investigate the mechanical characteristics, microstructural properties, and environmental impact of basic oxygen furnace (BOF) slag-treated clay in South Korea. Mechanical characteristics were determined via the expansion, vane shear, and unconfined compression tests according to various curing times. Scanning electron microscopy was conducted to analyze microstructural properties. Furthermore, environmental impacts were evaluated by the leaching test and pH measurements. According to the results, at the early curing stage (within 15 h), the free lime (F-CaO) content of the BOF slag is a significant factor for developing the strength of the adopted sample. However, the particle size of the BOF slag influences the increase in the strength at subsequent curing times. It was inferred that the strength behavior of the sample exhibits three phases depending on various incremental strength ratios. The expansion magnitude of the adopted samples is influenced by the F-CaO content and also the particle size of the BOF slag. Regarding the microstructural properties, the presence of reticulation structures in the amorphous gels with intergrowths of rod-like ettringite formation was verified inside the sample. Finally, the pH values and heavy metal leachates of the samples were determined within the compatible ranges of the threshold effect levels in the marine sediments of the marine environment standard of the Republic of Korea.

scholarly journals Leaching Behaviour of Construction and Demolition Wastes and Recycled Aggregates: Statistical Analysis Applied to the Release of Contaminants

2021 ◽  
Vol 11 (14) ◽  
pp. 6265
Author(s):  
Alessandra Diotti ◽  
Giovanni Plizzari ◽  
Sabrina Sorlini
Keyword(s):  
Particle Size ◽  
Statistical Analysis ◽  
Raw Materials ◽  
Primary Source ◽  
Recycled Aggregates ◽  
Critical Parameters ◽  
Material Particle ◽  
Analysis Methodology ◽  
Construction And Demolition Wastes ◽  
Leaching Behaviour

Construction and demolition wastes represent a primary source of new alternative materials which, if properly recovered, can be used to replace virgin raw materials partially or totally. The distrust of end-users in the use of recycled aggregates is mainly due to the environmental performance of these materials. In particular, the release of pollutants into the surrounding environment appears to be the aspect of greatest concern. This is because these materials are characterized by a strong heterogeneity which can sometimes lead to contaminant releases above the legal limits for recovery. In this context, an analysis of the leaching behaviour of both CDWs and RAs was conducted by applying a statistical analysis methodology. Subsequently, to evaluate the influence of the particle size and the volumetric reduction of the material on the release of contaminants, several experimental leaching tests were carried out according to the UNI EN 12457-2 and UNI EN 12457-4 standards. The results obtained show that chromium, mercury, and COD are the most critical parameters for both CDWs and RAs. Moreover, the material particle size generally affects the release of contaminants (i.e., finer particles showed higher releases), while the crushing process does not always involve higher releases than the sieving process.

scholarly journals Mining Wastes of an Albite Deposit as Raw Materials for Vitrified Mullite Ceramics

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 232
Author(s):  
Pedro J. Sánchez-Soto ◽  
Eduardo Garzón ◽  
Luis Pérez-Villarejo ◽  
George N. Angelopoulos ◽  
Dolores Eliche-Quesada
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Phase Evolution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Mining Wastes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Value

In this work, an examination of mining wastes of an albite deposit in south Spain was carried out using X-ray Fluorescence (XRF), X-ray diffraction (XRD), particle size analysis, thermo-dilatometry and Differential Thermal Analysis (DTA) and Thermogravimetric (TG) analysis, followed by the determination of the main ceramic properties. The albite content in two selected samples was high (65–40 wt. %), accompanied by quartz (25–40 wt. %) and other minor minerals identified by XRD, mainly kaolinite, in agreement with the high content of silica and alumina determined by XRF. The content of Na2O was in the range 5.44–3.09 wt. %, being associated with albite. The iron content was very low (<0.75 wt. %). The kaolinite content in the waste was estimated from ~8 to 32 wt. %. The particle size analysis indicated values of 11–31 wt. % of particles <63 µm. The ceramic properties of fired samples (1000–1350 °C) showed progressive shrinkage by the thermal effect, with water absorption and open porosity almost at zero at 1200–1250 °C. At 1200 °C, the bulk density reached a maximum value of 2.38 g/cm3. An abrupt change in the phase evolution by XRD was found from 1150 to 1200 °C, with the disappearance of albite by melting in accordance with the predictions of the phase diagram SiO2-Al2O3-Na2O and the system albite-quartz. These fired materials contained as main crystalline phases quartz and mullite. Quartz was present in the raw samples and mullite was formed by decomposition of kaolinite. The observation of mullite forming needle-shape crystals was revealed by Scanning Electron Microscopy (SEM). The formation of fully densified and vitrified mullite materials by firing treatments was demonstrated.

scholarly journals Effects of processing, moisture, and storage length on the fermentation profile, particle size, and ruminal disappearance of reconstituted corn grain

2020 ◽  
Vol 98 (11) ◽  
Author(s):  
Ana L M Gomes ◽  
Antonio V I Bueno ◽  
Fernando A Jacovaci ◽  
Guilherme Donadel ◽  
Luiz F Ferraretto ◽  
...  
Keyword(s):  
Particle Size ◽  
Lactic Acid ◽  
Butyric Acid ◽  
Hammer Mill ◽  
Moisture Concentration ◽  
Fermentation Profile ◽  
And Storage ◽  
Ground Corn ◽  
Corn Grain

Abstract Our objective was to examine the effects of processing, moisture, and anaerobic storage length of reconstituted corn grain (RCG) on the fermentation profile, geometric mean particle size (GMPS), and ruminal dry matter disappearance (DMD). Dry corn kernels were ground (hammer mill, 5-mm screen) or rolled, then rehydrated to 30%, 35%, or 40% moisture, and stored for 0, 14, 30, 60, 90, 120, or 180 d in laboratory silos. Rolled corn had an increased GMPS compared with ground corn (2.24 and 1.13 mm, respectively, at ensiling). However, there was a trend for an interaction between processing and moisture concentration to affect particle size, with GMPS increasing with increased moisture concentration, especially in ground corn. Longer storage periods also slightly increased GMPS. Processing, moisture, and storage length interacted to affect the fermentation pattern (two- or three-way interactions). Overall, pH decreased, whereas lactic acid, acetic acid, ethanol, and NH3-N increased with storage length. RCG with 30% moisture had less lactic acid than corn with 35% and 40% moisture, indicating that fermentation might have been curtailed and also due to the clostridial fermentation that converts lactic acid to butyric acid. Ensiling reconstituted ground corn with 30% of moisture led to greater concentrations of ethanol and butyric acid, resulting in greater DM loss than grain rehydrated to 35% or 40% of moisture. Ammonia-N and in situ ruminal DMD were highest for reconstituted ground corn with 35% or 40% of moisture, mainly after 60 d of storage. Therefore, longer storage periods and greater moisture contents did not offset the negative effect of greater particle size on the in situ ruminal DMD of rolled RCG. Nonetheless, RCG should be ensiled with more than 30% moisture and stored for at least 2 mo to improve the ruminal DMD and reduce the formation of ethanol and butyric acid.

New uses for brick-making clay materials from the Bailén area (southern Spain)

Clay Minerals ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 453-465 ◽  
Author(s):  
I. Gonzalez ◽  
E. Galan ◽  
A. Miras ◽  
P. Aparicio
Keyword(s):  
Particle Size ◽  
Iron Oxides ◽  
Raw Materials ◽  
The Other ◽  
Southern Spain ◽  
Other Hand ◽  
Floor Tiles ◽  
Potential Applications ◽  
Clay Materials

AbstractAn attempt has been made to assess new potential applications for the Bailén clays, traditionally used for manufacturing bricks, based on mineralogical, chemical, particle size, plasticity and firing results. Raw materials and mixtures used by the local factory were selected and tested with the addition of some diatomite, feldspar or kaolin. Based on their properties, clay materials from Bailén might be suitable for making porous red wall tiles, clinker, vitrified red floor tiles and porous light-coloured wall tiles by pressing; the first could be manufactured from the raw materials and mixtures currently used by the local manufactures. On the other hand, stoneware shaped by extrusion, such as perforated bricks, facing bricks and roofing tiles, can be also manufactured from the mixtures used at the factory if they contain 20-25% carbonate and small amounts of iron oxides; lightweight bricks require black and yellow clays with diatomite.

scholarly journals Phase evolution, characterisation, and performance of cement prepared in an oxy-fuel atmosphere

2016 ◽  
Vol 192 ◽  
pp. 113-124 ◽  
Author(s):  
Liya Zheng ◽  
Thomas P. Hills ◽  
Paul Fennell
Keyword(s):  
Particle Size ◽  
Compressive Strength ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Carbon Capture ◽  
Raw Materials ◽  
Carbon Capture And Storage ◽  
Phase Evolution ◽  
Chemical Compositions ◽  
Phase And Elemental Compositions

Cement manufacture is one of the major contributors (7–10%) to global anthropogenic CO2 emissions. Carbon capture and storage (CCS) has been identified as a vital technology for decarbonising the sector. Oxy-fuel combustion, involving burning fuel in a mixture of recycled CO2 and pure O2 instead of air, makes CO2 capture much easier. Since it combines a theoretically lower energy penalty with an increase in production, it is attractive as a CCS technology in cement plants. However, it is necessary to demonstrate that changes in the clinkering atmosphere do not reduce the quality of the clinker produced. Clinkers were successfully produced in an oxy-fuel atmosphere using only pure oxides as raw materials as well as a mixture of oxides and clay. Then, CEM I cements were prepared by the addition of 5 wt% gypsum to the clinkers. Quantitative XRD and XRF were used to obtain the phase and elemental compositions of the clinkers. The particle size distribution and compressive strength of the cements at 3, 7, 14, and 28 days' ages were tested, and the effect of the particle size distribution on the compressive strength was investigated. Additionally, the compressive strength of the cements produced in oxy-fuel atmospheres was compared with those of the cement produced in air and commercially available CEMEX CEM I. The results show that good-quality cement can be successfully produced in an oxy-fuel atmosphere and it has similar phase and chemical compositions to CEM I. Additionally, it has a comparable compressive strength to the cement produced in air and to commercially available CEMEX CEM I.

Minimizing Segregation in Bunkers

1973 ◽  
Vol 95 (1) ◽  
pp. 81-85 ◽  
Author(s):  
K. Clague ◽  
H. Wright
Keyword(s):  
Particle Size ◽  
Flow Regime ◽  
Mass Flow ◽  
Raw Materials ◽  
Model Tests ◽  
Material Density ◽  
Filling Method ◽  
Density Results

Bunkers used in steelworks sinter plants and other applications need to be designed and operated so that the feed emerging is unsegregated. A series of model tests has been carried out to discover which bunker shape, flow regime, and filling method give the least segregation for raw materials of different particle size and density. Results are compared with results from larger bunkers. The main conclusions are that an evenly-filled wedge-shaped mass-flow bunker is best at preventing segregation and that material density has little effect.

Sign in / Sign up

Export Citation Format

Share Document