ON THE INFLUENCE OF OPERATING CHARACTERISTICS OF GRINDED WHEELS ON THE QUALITY INDICATORS OF GRINDED PARTS

2020 ◽  
pp. 86-92
Author(s):  
Марчук І. В. ◽  
Марчук В.І. ◽  
Джугурян Т.Г. ◽  
Гринюк С.В. ◽  
Карпюк В.О.
Keyword(s):  
Roller Bearing ◽  
Correct Choice ◽  
Stable Operation ◽  
Abrasive Tool ◽  
Operating Characteristics ◽  
Grinding Wheels ◽  
Grinding Machines ◽  
Quality Surface ◽  
Selection Of

The quality of the surfaces of roller bearing parts is formed in the process of interaction of the cutting tool with the surfaces to be treated. In addition to technological factors, a significant place in providing a quality surface layer is occupied by the correct choice of grinding wheels. The abrasive tool has different properties depending on its characteristics. When choosing an abrasive tool, it is necessary to take into account its characteristics and their suitability for a particular type of work. Stable operation of abrasive wheels depends on the correct choice of their size, characteristics and modes of operation. The selection of grinding wheels depends on the type and properties of machined materials, power of grinding machines, spindle speed, grinding mode, requirements for accuracy and surface cleanliness and other factors that apply to the workpieces. Depending on the accuracy requirements for machining parts made of different materials, the characteristics of abrasive wheels are selected, the main of which are hardness, grain size, bond, structure, shape, size and allowable speed.

New Active Online Balancing Method for Grinding Wheel Using Liquid Injection and Free Dripping

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Xining Zhang ◽  
Xu Liu ◽  
Huan Zhao
Keyword(s):  
Grinding Wheel ◽  
Time Varying ◽  
Residual Liquid ◽  
Grinding Wheels ◽  
Abrasive Particles ◽  
Balance Condition ◽  
Liquid Injection ◽  
Grinding Machines ◽  
The Relationship

Grinding is a vital method in machining techniques and an effective way to process materials such as hardened steels and silicon wafers. However, as the running time increases, the unbalance of grinding wheels produce a severe vibration and noise of grinding machines because of the uneven shedding of abrasive particles and the uneven adsorption of coolant, which has a severe and direct impact on the accuracy and quality of parts. Online balancing is an important and necessary technique to reduce the unbalance causing by these factors and adjust the time-varying balance condition of the grinding wheel. A new active online balancing method using liquid injection and free dripping is proposed in this paper. The proposed online balancing method possesses a continuous balancing ability and the problem of losing balancing ability for the active online balancing method using liquid injection is solved effectively because some chambers are full of liquid. The residual liquid contained in the balancing chambers is utilized as a compensation mass for reducing rotor unbalance, where the rotor phase is proposed herein as a target for determining the machine unbalance. A new balancing device with a controllable injection and free dripping structure is successfully designed. The relationship between the mass of liquid in the balancing chamber and the centrifugal force produced by liquid is identified. The performance of the proposed method is verified by the balancing experiments and the results of these experiments show that the vibration of unbalance response is reduced by 87.3% at 2700 r/min.

scholarly journals Molecular replacement then and now

2013 ◽  
Vol 69 (11) ◽  
pp. 2266-2275 ◽  
Author(s):  
Giovanna Scapin
Keyword(s):  
New York ◽  
Structural Similarity ◽  
Correct Choice ◽  
Search Model ◽  
Molecular Replacement ◽  
Acta Cryst ◽  
Replacement Method ◽  
Molecular Replacement Method ◽  
Selection Of

The `phase problem' in crystallography results from the inability to directly measure the phases of individual diffracted X-ray waves. While intensities are directly measured during data collection, phases must be obtained by other means. Several phasing methods are available (MIR, SAR, MAD, SAD and MR) and they all rely on the premise that phase information can be obtained if the positions of marker atoms in the unknown crystal structure are known. This paper is dedicated to the most popular phasing method, molecular replacement (MR), and represents a personal overview of the development, use and requirements of the methodology. The first description of noncrystallographic symmetry as a tool for structure determination was explained by Rossmann and Blow [Rossmann & Blow (1962),Acta Cryst.15, 24–31]. The term `molecular replacement' was introduced as the name of a book in which the early papers were collected and briefly reviewed [Rossmann (1972),The Molecular Replacement Method.New York: Gordon & Breach]. Several programs have evolved from the original concept to allow faster and more sophisticated searches, including six-dimensional searches and brute-force approaches. While careful selection of the resolution range for the search and the quality of the data will greatly influence the outcome, the correct choice of the search model is probably still the main criterion to guarantee success in solving a structure using MR. Two of the main parameters used to define the `best' search model are sequence identity (25% or more) and structural similarity. Another parameter that may often be undervalued is the quality of the probe: there is clearly a relationship between the quality and the correctness of the chosen probe and its usefulness as a search model. Efforts should be made by all structural biologists to ensure that their deposited structures, which are potential search probes for future systems, are of the best possible quality.

scholarly journals Research of working capacity of grinding wheels

2018 ◽  
Vol 224 ◽  
pp. 01005
Author(s):  
Tatyana N. Ivanova
Keyword(s):  
Temperature Field ◽  
Operation Mode ◽  
Grinding Wheel ◽  
Abrasive Tool ◽  
Working Capacity ◽  
Grinding Wheels ◽  
Temperature Stresses ◽  
Heating And Cooling ◽  
Abrasive Grain

The processing of materials by cutting with abrasive tool is carried out by means of thousands of grains bonded together as a single whole. The quality of abrasive tool is defined by cutting properties of abrasive grains and depends on features of spreading of temperature field in time and in abrasive grain volume. Grains are exposed to heating and cooling during work. It leads to undesired effects such as decrease of durability of grain retention in the binder, hardness, intensification of diffusion and oxidation processes between the binder and grain, the occurrence of considerable temperature stresses in the grain itself. Obtained equation which allows calculation of temperature field of grain for one rotation of grinding wheel shows that the temperature of the wheel depends on grinding modes and thermophysical properties of abrasive material. Recommendations for working capacity of grinding wheels in each operation mode and with a transition from one mode to another are given. As a result of research different dependencies were determined. They include dependencies governing the extent of influence of granularity, difference in height and concentration of grains, geometry parameters of detail to be machined and grinding wheel on machining modes and the thickness of layer cutoff by one grain.

scholarly journals ПІДВИЩЕННЯ ТОЧНОСТІ ТА ПРОДУКТИВНОСТІ ОБРОБКИ ТОРЦІВ РОЛИКІВ ПІДШИПНИКІВ КОЧЕННЯ

2019 ◽  
pp. 9-17
Author(s):  
Volodymyr Kalchenko ◽  
Dmytro Kalchenko ◽  
Volodymyr Venzhega ◽  
Sergiy Ryabov
Keyword(s):  
High Performance ◽  
High Accuracy ◽  
Machining Process ◽  
Grinding Wheels ◽  
Treatment Area ◽  
Rolling Bearings ◽  
High Productivity ◽  
Roller Bearings ◽  
Grinding Machines

Urgency of the research. High-precision and productive machining of the ends of the rollers of the roller bearings is an urgent and important scientific and practical task, the solution of which will allow both to prolong the life of the bearings and to reduce their production, and therefore to increase the level of competitiveness of production. Target setting. The main requirements relating to the rollers of the rolling bearings are to ensure the high accuracy of size, shape, quality of end surfaces with high productivity of the machining process. Actual scientific researches and issues analysis. The main directions of improving the accuracy and productivity of two-sided grinding are to increase the rigidity of the machine-tool-tool-part system, to reduce the thermal impact, to improve the kinematic characteristics of the workpiece movement in the treatment area, to optimize the design and characteristics of grinding wheels. Uninvestigated parts of general matters defining. One of the most promising areas for improving the accuracy and productivity of the double-sided grinding process is to use the effect of crossing axes of grinding wheels and billets with special tool profiling. The purpose of the article. To analyze the factors that affect the accuracy and productivity of machining the end surfaces of parts on two-sided grinding machines and to develop a new high-performance method of processing the end surfaces of the rollers of the roller bearings, which would provide the possibility of assembly between the rolling bodies and the rings, not by a selective method. The presentation of the main material. The combined editing of the two planes of grinding wheels on two-sided grinding machines enables to obtain a larger diameter of the calibration section. In this case, the entire allowance is cut off in the area adjacent to the gauge. The calibration section at the inlet of the parts in the treatment area does not participate in cutting off the seam allowance, has high stability and at the outlet forms the final accuracy of the end surfaces. Conclusions and suggestions. The paper proposes a new high-performance method of single-pass machining of the end surfaces of the rollers of the roller bearings on two-sided grinding machines with oriented grinding wheels, which have a calibration section, which ensures high accuracy of processing. This method allows to reduce the scattering range of sizes and to go to the method of complete interchangeability when assembling the bearing units.

ON THE EXPERT’S RIGHT TO BE PRESENT AT LEGAL PROCEEDINGS

2016 ◽  
Vol 15 ◽  
pp. 163-171
Author(s):  
M. G. Shcherbakovskiy
Keyword(s):  
Initial Data ◽  
Legal Proceedings ◽  
Reliable Assessment ◽  
Data Acquiring ◽  
Selection Of

The article discusses the reasonsfor an expert to participate in legal proceedings. The gnoseological reason for that consists of the bad quality of materials subject to examination that renders the examination either completely impossible or compromises objective, reasoned and reliable assessment of the findings. The procedural reason consists ofa proscription for an expert to collect evidence himself or herself. The author investigates into the ways of how an expert can participate in legal proceedings. If the defense invites an expert to participate in the proceedings, then it is recommended that his or her involvement should be in the presence of attesting witnesses and recorded in the protocol. In the course of the legal proceedings an expert has the following tasks: adding initial data, acquiring new initial data, understanding the situation of the incident, acquiring new objects to be studied, including samples for examination. An expert’s participation in legal proceedings differs from the participation of a specialist or an examination on the scene of the incident. The author describes the tasks that an expert solves in the course of legal proceedings, the peculiarities ofan investigation experiment practices, the selection of samples for an examination, inspection, interrogation.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

DESIGN, SIMULATION AND IMPLEMENTATION MONITORING SYSTEM FOR SYSTEM CONTROL C4 FEEDING PUMP FOR FEED VAPORIZATION IN THE BUTADIENE PLANT

2020 ◽  
Vol 1 (1) ◽  
pp. 31-35
Author(s):  
Fahmi Yunistyawan ◽  
Yunistyawan J Berchmans ◽  
Gembong Baskoro
Keyword(s):  
Motor Control ◽  
Control System ◽  
Field Operator ◽  
System Control ◽  
Variable Speed ◽  
Variable Speed Drive ◽  
Software And Hardware ◽  
Discharge Pressure ◽  
Selection Of

This study implements the auto start control system on an electric motor 3 phase C4Feeding pump when the discharge pressure is low-low (4.3 kg /cm²). The C4 feeding pumpmotor was initially manually operated from the local control station, this was very ineffectiveand inefficient because it still relied on the field operator to operate the pump motor and whenthe plant was in normal operating it is very risk if the field operator late to operate motor then itwill impact to quality of the product, and if the delay time to operate motor is too long then planthave to shut down, therefore improvement is needed in the C4 feeding pump motor controlsystem. In this paper, various types of 3-phase motor control are explained which allow it to beapplied to the C4 feeding pump motor that are on-off, inverter, and variable speed drive andefficient selection of the three systems control of the motor. Software and hardware used in thisthesis work are DCS CENTUM VP Yokogawa.

Thomas More’s Correspondence in a Spanish Ambiance

Moreana ◽  
2002 ◽  
Vol 39 (Number 149) (1) ◽  
pp. 41-60 ◽  
Author(s):  
Eugenio M. Olivares Merino
Keyword(s):  
The Subject ◽  
Selection Of

The recent reprinting of Álvaro de Silva’s 1998 edition of a selection of More’s letters prompts the author to examine the subject of Spanish translations of More, and of de Silva’s general commentary on More’s correspondence and on his relationship to other humanists. The author reflects on aspects of More’s personality as exposed in his letters and uses what he finds as a corrective to several biographical misconceptions. He points out the strengths and weaknesses of de Silva’s work and compares it with that of other translators, particularly Elizabeth Rogers, and notes the particularly Spanish quality of de Silva’s edition.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Sign in / Sign up

Export Citation Format

Share Document