Comparative assessment of the pulmonary effect in rats to a single intratracheal administration of selenium or copper oxide nanoparticles

2021 ◽  
Vol 29 (6) ◽  
pp. 39-46
Author(s):  
Marina Petrovna Sutunkova ◽  
Larisa Ivanovna Privalova ◽  
Yuliya Vladimirovna Ryabova ◽  
Ilzira Amirovna Minigalieva ◽  
Anastasiya Valeryevna Tazhigulova ◽  
...  
Keyword(s):  
Copper Oxide ◽  
Cytotoxic Effect ◽  
Lavage Fluid ◽  
Copper Oxide Nanoparticles ◽  
Female Rats ◽  
Oxide Nanoparticles ◽  
Cellular Composition ◽  
Phagocytic Capacity ◽  
Intratracheal Administration ◽  
Cuo Nps

Introduction. Professional contact with selenium, copper and their compounds, including nanoscale forms, occurs in the metallurgical processes of copper sludge processing, copper pyrite roasting, manganese, selenium and tellurium production. The wide prevalence of selenium and copper oxide nanoparticles (SeO and CuO NPs) necessitates a comparative experimental assessment of its toxicity. Materials and methods. The copper or selenium oxide nanoparticle suspensions or a deionized water were intratracheally administered to female rats at single time. The bronchoalveolar lavage fluid (BALF) was obtained 24 hours after administration. There were evaluated the cellular composition and the biochemical parameters of the BALF. Results. The changes in the cellular composition of BALF demonstrate the SeO-NP and CuO-NP have a cytotoxic effect. The BALF biochemical indices were changed to a greater extent under CuO-NP. However, the phagocytic capacity of alveolar macrophages is activated under the SeO-NP. Conclusion. The SeO-NP and CuO-NP have a cytotoxic effect. SeO-NP have a positive effect on pulmonary phagocytosis, which can presumably be associated with selenium is a biomicroelement.

scholarly journals Copper Oxide Nanoparticles Stimulate Cytotoxicity and Apoptosis in Glial Cancer Cell Line

2018 ◽  
Vol 17 (1) ◽  
pp. 105-111 ◽  
Author(s):  
Nasim Rahmani Kukia ◽  
Ardeshir Abbasi ◽  
Seyyed Maysam Abtahi Froushani
Keyword(s):  
Copper Oxide ◽  
Cancer Cells ◽  
Cell Line ◽  
Cytotoxic Effect ◽  
Cancer Cell Line ◽  
Copper Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Cuo Nps

Due to cytotoxic potential, Copper Oxide Nanoparticles (CuO NPs) have recently been studied in various in vivo and in culture cell line. Also, CuO has received much attention in cancer therapy. We aimed to evaluate the cytotoxicity of CuO NPs on glial cancer (B92) cell line. B92 cancer cells were cultured with CuO NPs at different concentrations (5, 10, and 20 μg/ml) with 30 and 60 nm particle size. Then, cancer cells were incubated for 24 hrs. The apoptosis and cytotoxicity of cells were estimated by acridine orange/propidium iodide staining and MTT assay, respectively. Both sizes of CuO NPs had cytotoxic effect. Even with the lowest concentration, the cytotoxic impact accommodated 32% of cell apoptosis with 30 nm size. When the concentration of CuO NPs increased, viability decreased and apoptosis increased. However, these amounts have no significant changes in the concentration of 10 to 20 μg/ml between two particle sizes (30 and 60 nm). The IC50 was decreased as the size of particles increased, but there was no significant change. This finding suggests that exposure to CuO NPs had significant cytotoxic effect with the sizes tested when compared to unexposed control in a way that the smaller size and higher concentration exerted the maximum cytotoxic effects. It seems that augmentation may not have any impact on their in vitro cytotoxicity.Dhaka Univ. J. Pharm. Sci. 17(1): 105-111, 2018 (June)

ANTIBIOTIC PROFILE AND ANTIBACTERIAL ACTIVITY OF COPPER OXIDE NANOPARTICLES AGAINST Pseudomonas fluorescens ISOLATED FROM WOUND INFECTION

2019 ◽  
Vol 9 (o3) ◽  
Author(s):  
Haider Qassim Raheem ◽  
Takwa S. Al-meamar ◽  
Anas M. Almamoori
Keyword(s):  
Antibacterial Activity ◽  
Copper Oxide ◽  
Pseudomonas Fluorescens ◽  
Wide Spectrum ◽  
Copper Oxide Nanoparticles ◽  
Morphological Properties ◽  
Clinical Samples ◽  
Oxide Nanoparticles ◽  
Cuo Nps ◽  
Disk Diffusion Assay

Fifty specimens were collected from wound patients who visited Al-Hilla Teaching Hospital. The samples were grown on Blood and MacConkey agar for 24-48 hr at 37oC. The bacterial isolates which achieved as a pure and predominant growth from clinical samples as Pseudomonas fluorescens, were identified using morphological properties and Vitek2 system. The anti-bacterial activity of copper oxide nanoparticles (CuO NPs) against was tested by (disk diffusion assay) using dilutions of (400, 200, 100, 50, 25, and 12.5‎µ‎g/ml). The (MIC and MBC) of each isolate was determined. CuO NPs shows wide spectrum antibacterial activity against tested bacteria with rise zone of inhibition diameter that is proportionate with the increase in nanoparticle concentration. The MIC of CuO NPs extended from 100-200‎µ‎g/ml and the MBC ranged from 200-400‎µ‎g/ml. The antibiotic profile was determined by Viteck 2 compact system (Biomérieux). CuO NPs‎ found highly effective and safe in P. fluorescens wounds infections comparing with used antibiotics.

scholarly journals Green copper oxide nanoparticles for lead, nickel, and cadmium removal from contaminated water

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Alaa El Din Mahmoud ◽  
Khairia M. Al-Qahtani ◽  
Sahab O. Alflaij ◽  
Salma F. Al-Qahtani ◽  
Faten A. Alsamhan
Keyword(s):  
Experimental Data ◽  
Copper Oxide ◽  
Copper Oxide Nanoparticles ◽  
Bet Surface Area ◽  
Oxide Nanoparticles ◽  
Cadmium Removal ◽  
Cuo Nps ◽  
Pseudo Second Order ◽  
Isotherm And Kinetic Models ◽  
Lead Nickel

AbstractEnvironmentally friendly copper oxide nanoparticles (CuO NPs) were prepared with a green synthesis route without using hazardous chemicals. Hence, the extracts of mint leaves and orange peels were utilized as reducing agents to synthesize CuO NPs-1 and CuO NPs-2, respectively. The synthesized CuO NPs nanoparticles were characterized using scanning electron microscopy (SEM), Energy Dispersive X-ray Analysis (EDX), BET surface area, Ultraviolet–Visible spectroscopy (UV–Vis), and Fourier Transform Infrared Spectroscopy (FT-IR). Various parameters of batch experiments were considered for the removal of Pb(II), Ni(II), and Cd(II) using the CuO NPs such as nanosorbent dose, contact time, pH, and initial metal concentration. The maximum uptake capacity (qm) of both CuO NPs-1 and CuO NPs-2 followed the order of Pb(II) > Ni(II) > Cd(II). The optimum qm of CuO NPs were 88.80, 54.90, and 15.60 mg g−1 for Pb(II), Ni(II), and Cd(II), respectively and occurred at sorbent dose of 0.33 g L−1 and pH of 6. Furthermore, isotherm and kinetic models were applied to fit the experimental data. Freundlich models (R2 > 0.97) and pseudo-second-order model (R2 > 0.96) were fitted well to the experimental data and the equilibrium of metal adsorption occurred within 60 min.

scholarly journals Green Synthesis of Copper Oxide Nanoparticles Using Protein Fractions from an Aqueous Extract of Brown Algae Macrocystis pyrifera

Processes ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 78
Author(s):  
Karla Araya-Castro ◽  
Tzu-Chiao Chao ◽  
Benjamín Durán-Vinet ◽  
Carla Cisternas ◽  
Gustavo Ciudad ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Copper Oxide ◽  
Green Synthesis ◽  
Aqueous Extract ◽  
Brown Algae ◽  
Copper Oxide Nanoparticles ◽  
Macrocystis Pyrifera ◽  
Protein Fractions ◽  
Oxide Nanoparticles ◽  
Cuo Nps

Amongst different living organisms studied as potential candidates for the green synthesis of copper nanoparticles, algal biomass is presented as a novel and easy-to-handle method. However, the role of specific biomolecules and their contribution as reductant and capping agents has not yet been described. This contribution reports a green synthesis method to obtain copper oxide nanoparticles (CuO-NPs) using separated protein fractions from an aqueous extract of brown algae Macrocystis pyrifera through size exclusion chromatography (HPLC-SEC). Proteins were detected by a UV/VIS diode array, time-based fraction collection was carried out, and each collected fraction was used to evaluate the synthesis of CuO-NPs. The characterization of CuO-NPs was evaluated by Dynamic Light Scattering (DLS), Z-potential, Fourier Transform Infrared (FTIR), Transmission Electron Microscope (TEM) equipped with Energy Dispersive X-ray Spectroscopy (EDS) detector. Low Molecular Weight (LMW) and High Molecular Weight (HMW) protein fractions were able to synthesize spherical CuO-NPs. TEM images showed that the metallic core present in the observed samples ranged from 2 to 50 nm in diameter, with spherical nanostructures present in all containing protein samples. FTIR measurements showed functional groups from proteins having a pivotal role in the reduction and stabilization of the nanoparticles. The highly negative zeta potential average values from obtained nanoparticles suggest high stability, expanding the range of possible applications. This facile and novel protein-assisted method for the green synthesis of CuO-NPs may also provide a suitable tool to synthesize other nanoparticles that have different application areas.

scholarly journals Synthesis, Characterization, and Antimicrobial Activity of Copper Oxide Nanoparticles

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Maqusood Ahamed ◽  
Hisham A. Alhadlaq ◽  
M. A. Majeed Khan ◽  
Ponmurugan Karuppiah ◽  
Naif A. Al-Dhabi
Keyword(s):  
Antimicrobial Activity ◽  
Electron Microscope ◽  
Copper Oxide ◽  
Field Emission ◽  
Copper Oxide Nanoparticles ◽  
Klebsiella Pneumonia ◽  
Oxide Nanoparticles ◽  
Xrd Pattern ◽  
X Ray ◽  
Cuo Nps

We studied the structural and antimicrobial properties of copper oxide nanoparticles (CuO NPs) synthesized by a very simple precipitation technique. Copper (II) acetate was used as a precursor and sodium hydroxide as a reducing agent. X-ray diffraction patter (XRD) pattern showed the crystalline nature of CuO NPs. Field emission scanning electron microscope (FESEM) and field emission transmission electron microscope (FETEM) demonstrated the morphology of CuO NPs. The average diameter of CuO NPs calculated by TEM and XRD was around 23 nm. Energy dispersive X-ray spectroscopy (EDS) spectrum and XRD pattern suggested that prepared CuO NPs were highly pure. CuO NPs showed excellent antimicrobial activity against various bacterial strains (Escherichia coli,Pseudomonas aeruginosa,Klebsiella pneumonia,Enterococcus faecalis,Shigella flexneri,Salmonella typhimurium,Proteus vulgaris,andStaphylococcus aureus). Moreover,E. coliandE. faecalisexhibited the highest sensitivity to CuO NPs whileK. pneumoniawas the least sensitive. Possible mechanisms of antimicrobial activity of CuO NPs should be further investigated.

scholarly journals Development of non-enzymatic cholesterol electrochemical sensor based on CuO(NPs)-Polyaniline-Murexide composite

2021 ◽  
Author(s):  
Chedia Ben Ali Hassine ◽  
Hamza Kahri ◽  
Houcine Barhoumi
Keyword(s):  
Impedance Spectroscopy ◽  
Copper Oxide ◽  
Glassy Carbon Electrode ◽  
Glassy Carbon ◽  
Linear Sweep Voltammetry ◽  
High Sensitivity ◽  
Copper Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Carbon Electrode ◽  
Cuo Nps

Abstract In this study, a novel non-enzymatic sensor based on copper oxide nanoparticles (CuO), polyaniline nanofibers (PANI) and murexide (Mu) modified glassy carbon electrode was developed and used for the detection of cholesterol. Copper oxide nanoparticles were deposited on the glassy carbon electrode through electrodeposition and electrochemical oxidation followed by electrodeposition of PANI-Mu composite. The as prepared CuO-PANI-Mu sensor was characterized using electrochemical, optical and morphological methods such as cyclic voltammetry (CV), impedance spectroscopy (EIS), linear sweep voltammetry (LSV), UV-visible and scanning electron microscopy (SEM). The elaborated composite matrix was used for cholesterol detection employing the impedance spectroscopy method. As a result, good analytical performances were obtained for cholesterol quantification with good stability and high sensitivity (5575 Ω/M) with a wide linear range from 0.5nM to 50mM.

scholarly journals A novel route for the synthesis of copper oxide nanoparticles using Bougainvillea plant flowers extract and antifungal activity evaluation

2021 ◽  
Author(s):  
CI Chemistry International
Keyword(s):  
Antifungal Activity ◽  
Copper Oxide ◽  
Fungal Growth ◽  
Cost Effective ◽  
Average Diameter ◽  
Copper Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Standard Drug ◽  
Cuo Nps ◽  
Transmission Electron

A green, cost-effective and eco-friendly method for the synthesis of copper oxide nanoparticles (CuO NPs) using Bougainvillea flower aqueous extract at room temperature was reported. The synthesized CuO NPs were characterized by UV–visible spectroscopy, fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and X-ray diffraction (XRD) tecniques. The synthesized particles were highly stable, spherical in shape with an average diameter of 12±4 nm. The CuO NPs were explored for their antifungal activity against Aspergillus niger and responses revealed that CuO NPs are highly efficient to inhibit the fungal growth and zone of inhibition were comparable with standard drug. The green route for the synthesis of CuO NPs is suggested in view of promising antifungal activity.

scholarly journals Green Synthesis of Copper Oxide Nanoparticles Using Aerva javanica Leaf Extract and Their Characterization and Investigation of In Vitro Antimicrobial Potential and Cytotoxic Activities

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Fozia Amin ◽  
Fozia ◽  
Baharullah Khattak ◽  
Amal Alotaibi ◽  
Muhammad Qasim ◽  
...  
Keyword(s):  
Copper Oxide ◽  
Fungal Pathogens ◽  
Leaf Extract ◽  
Antimicrobial Activities ◽  
Copper Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Antimicrobial Potential ◽  
Cuo Nps

The development of green technology is creating great interest for researchers towards low-cost and environmentally friendly methods for the synthesis of nanoparticles. Copper oxide nanoparticles (CuO-NPs) attracted many researchers due to their electric, catalytic, optical, textile, photonic, monofluid, and pharmacological activities that depend on the shape and size of the nanoparticles. This investigation aims copper oxide nanoparticles synthesis using Aerva javanica plant leaf extract. Characterization of copper oxide nanoparticles synthesized by green route was performed by three different techniques: X-Ray Diffraction (XRD), Fourier Transform Infrared (FTIR) Spectroscopy, and Scanning Electron Microscopy (SEM). X-ray diffraction (XRD) reveals the crystalline morphology of CuO-NPs and the average crystal size obtained is 15 nm. SEM images showed the spherical nature of the particles and size is lying in the 15–23 nm range. FTIR analysis confirms the functional groups of active components present in the extract which are responsible for reducing and capping agents for the synthesis of CuO-NPs. The synthesized CuO-NPs were studied for their antimicrobial potential against different bacterial as well as fungal pathogens. The results indicated that CuO-NPs show maximum antimicrobial activities against all the selected bacterial and fungal pathogens. Antimicrobial activities of copper oxide nanoparticles were compared with standard drugs Norfloxacin and amphotericin B antibiotics. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of copper oxide nanoparticles were 128 μg/mL against all selected bacterial pathogens. MIC of fungus and minimum fungicidal concentration (MFC) of CuO-NPs were 160 μg/mL. Thus, CuO-NPs can be utilized as a broad-spectrum antimicrobial agent. The cytotoxic activity of the synthesized CuO-NPs suggested that toxicity was negligible at concentrations below 60 μg/mL.

Sign in / Sign up

Export Citation Format

Share Document