scholarly journals Numerical Analysis on A Non-Critical Stenosis in Renal Artery

2021 ◽  
Vol 88 (3) ◽  
pp. 31-48
Author(s):  
Pranav Hegde ◽  
Gowrava Shenoy B. ◽  
A B V Barboza ◽  
S. M. Abdul Khader ◽  
Raghuvir Pai ◽  
...  
Keyword(s):  
Shear Stress ◽  
Renal Artery ◽  
Static Pressure ◽  
Flow Characteristics ◽  
Flow Acceleration ◽  
Flow Recirculation ◽  
Critical Stenosis ◽  
Early Systole ◽  
Stenosed Artery ◽  
Velocity Pressure

The increase in cardiovascular diseases worldwide has resulted in higher death rate of people globally; the primary reason being atherosclerosis. A better understanding of this condition can be achieved through the application of numerical methods to understand the haemodynamics. The present study aims to investigate the effects of renal artery angulation on the flow characteristics in a non-critically stenosed artery compared to that of a normal artery in order to understand better, the reasons for causes and progression of renal artery stenosis. Abdominal aorta-renal artery models ranging from 30° to 90° angulations were generated from computerized tomography-angiogram slices, post which they were subjected to cleanup and defeaturing. Haemodynamic parameters such as velocity, pressure and time-averaged wall shear stress were evaluated at early systole, peak systole and peak diastole for the different artery models. Extensive amounts of flow recirculation were observed in normal renal arteries with higher bifurcating angles, whereas it was not the case in stenosed arteries where flow acceleration was seen for the duration of the cardiac cycle. Evaluation of static pressure encountered a similar trend where an increase in angulation saw a decrease in pressure for normal arteries which contradicted with stenosed artery results. Analysis of shear stress saw very similar trends in normal and stenosed arteries, with lower angulation profiles experiencing higher values of shear stress at the Ostia. In the cases of arteries of higher angulation with a non-critical stenosis, the possibility of worsening of stenosis into an opprobrious stage remains a concern.

scholarly journals Effect of Externally Applied Transverse Magnetic Field on Unsteady Flow of Blood in Tapered Stenosed Artery

2019 ◽  
Vol 8 (6) ◽  
pp. 1398-1406
Keyword(s):  
Magnetic Field ◽  
Blood Flow ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Transverse Magnetic Field ◽  
Flow Rate ◽  
Flow Characteristics ◽  
Volumetric Flow Rate ◽  
Transverse Magnetic ◽  
Stenosed Artery

The role of flow parameters of blood is very important in maintaining proper functioning of heart and in turn health body. Herschel–Bulkley fluid model is used for the proposed one-fluid blood flow model. The behavior of important blood flow characteristics wall shear stress, volumetric flow rate and axial velocity of the flow in tapered mild stenosed artery in the presence of externally applied transverse magnetic field is studied. A combination of analytical and numerical methods is used to solve the mathematical model of the system. We report the importance constant/variable viscosity of blood on unsteady flow in the proposed artery. Numerical results are reported for different values of the physical parameters of interest. It is observed with the help of graphs, that the flow characteristics wall shear stress, volumetric flow rate and axial velocity are affected in tapered stenosed artery and flow can be regulated with the help externally applied transverse magnetic field.

scholarly journals Numerical Investigation into the Effects of Design Parameters on the Flow Characteristics in a Turbine Exhaust Diffuser

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5171
Author(s):  
Byung Ju Lee ◽  
Jin Taek Chung
Keyword(s):  
Static Pressure ◽  
Flow Characteristics ◽  
Aerodynamic Performance ◽  
Design Parameters ◽  
Conical Diffuser ◽  
Aerodynamic Performances ◽  
Lean Angle ◽  
Annular Diffuser ◽  
Velocity Pressure ◽  
Turbine Exhaust

In this study, we numerically investigated the effects of design parameters, such as the strut geometry or diffusion angle, on the performance of an industrial turbine exhaust diffuser. Turbine exhaust diffusers are commonly used to change the kinetic energy of exhaust gases from the outlet of turbine stages into the static pressure. The turbine exhaust diffuser investigated in this work consisted of an annular diffuser with five identical struts equally spaced around the front circumference and a conical diffuser with a hub extension at the rear. Four design parameters were considered and several values for each parameter were tested in this study. The aerodynamic performances of the studied diffusers were evaluated according to their pressure recovery coefficients and rates of total pressure loss. Contours for the velocity, pressure, and entropy increase were plotted and compared for the various diffuser shapes. The numerical results showed that the strut thickness and the axially swept angle of the strut significantly influence the aerodynamic performance of the turbine exhaust diffuser, whereas the strut lean angle and the diffuser hade angle are less important.

Study on the Flow Characteristics of Shengli Oilfield Super Heavy Oil

2017 ◽  
Vol 10 (1) ◽  
pp. 69-78 ◽  
Author(s):  
Wang Shou-long ◽  
Li Ai-fen ◽  
Peng Rui-gang ◽  
Yu Miao ◽  
Fu Shuai-shi
Keyword(s):  
Pressure Drop ◽  
Pressure Gradient ◽  
Heavy Oil ◽  
Flow Characteristics ◽  
Fluid Viscosity ◽  
Linear Flow ◽  
Start Up ◽  
Non Linear ◽  
Core Permeability ◽  
Velocity Pressure

Objective:The rheological properties of oil severely affect the determination of percolation theory, development program, production technology and oil-gathering and transferring process, especially for super heavy oil reservoirs. This paper illustrated the basic seepage morphology of super heavy oil in micro pores based on its rheological characteristics.Methods:The non-linear flow law and start-up pressure gradient of super heavy oil under irreducible water saturation at different temperatures were performed with different permeable sand packs. Meanwhile, the empirical formulas between start-up pressure gradient, the parameters describing the velocity-pressure drop curve and the ratio of gas permeability of a core to fluid viscosity were established.Results:The results demonstrate that temperature and core permeability have significant effect on the non-linear flow characteristics of super heavy oil. The relationship between start-up pressure gradient of oil, the parameters representing the velocity-pressure drop curve and the ratio of core permeability to fluid viscosity could be described as a power function.Conclusion:Above all, the quantitative description of the seepage law of super heavy oil reservoir was proposed in this paper, and finally the empirical diagram for determining the minimum and maximum start-up pressure of heavy oil with different viscosity in different permeable formations was obtained.

scholarly journals Interactions between Tandem Cylinders in an Open Channel: Impact on Mean and Turbulent Flow Characteristics

Water ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 1718
Author(s):  
Hasan Zobeyer ◽  
Abul B. M. Baki ◽  
Saika Nowshin Nowrin
Keyword(s):  
Turbulent Flow ◽  
Open Channel ◽  
Recirculation Zone ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Flow Recirculation ◽  
Tandem Cylinders ◽  
Flow Development ◽  
The Mean ◽  
Recirculation Length

The flow hydrodynamics around a single cylinder differ significantly from the flow fields around two cylinders in a tandem or side-by-side arrangement. In this study, the experimental results on the mean and turbulence characteristics of flow generated by a pair of cylinders placed in tandem in an open-channel flume are presented. An acoustic Doppler velocimeter (ADV) was used to measure the instantaneous three-dimensional velocity components. This study investigated the effect of cylinder spacing at 3D, 6D, and 9D (center to center) distances on the mean and turbulent flow profiles and the distribution of near-bed shear stress behind the tandem cylinders in the plane of symmetry, where D is the cylinder diameter. The results revealed that the downstream cylinder influenced the flow development between cylinders (i.e., midstream) with 3D, 6D, and 9D spacing. However, the downstream cylinder controlled the flow recirculation length midstream for the 3D distance and showed zero interruption in the 6D and 9D distances. The peak of the turbulent metrics generally occurred near the end of the recirculation zone in all scenarios.

scholarly journals Significance of Slippage and Electric Field in Mucociliary Transport of Biomagnetic Fluid

Lubricants ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 48
Author(s):  
Sufian Munawar
Keyword(s):  
Shear Stress ◽  
Flow Direction ◽  
Pressure Rise ◽  
Physical Parameters ◽  
Slippage Effect ◽  
Channel Surface ◽  
Electro Osmosis ◽  
Biomagnetic Fluid ◽  
Velocity Pressure ◽  
Metachronal Waves

Shear stress at the cilia wall is considered as an imperative factor that affects the efficiency of cilia beatings as it describes the momentum transfer between the fluid and the cilia. We consider a visco-inelastic Prandtl fluid in a ciliated channel under electro-osmotic pumping and the slippage effect at cilia surface. Cilia beating is responsible for the stimulation of the flow in the channel. Evenly distributed cilia tend to move in a coordinated rhythm to mobilize propulsive metachronal waves along the channel surface by achieving elliptic trajectory movements in the flow direction. After using lubrication approximations, the governing equations are solved by the perturbation method. The pressure rise per metachronal wavelength is obtained by numerically integrating the expression. The effects of the physical parameters of interest on various flow quantities, such as velocity, pressure gradient, pressure rise, stream function, and shear stress at the ciliated wall, are discussed through graphs. The analysis reveals that the axial velocity is enhanced by escalating the Helmholtz–Smoluchowski velocity and the electro-osmosis effects near the elastic wall. The shear stress at the ciliated boundary elevates with an increase in the cilia length and the eccentricity of the cilia structure.

scholarly journals Computational Modeling of Flow Characteristics in Three Products Hydrocyclone Screen

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1295
Author(s):  
Anghong Yu ◽  
Chuanzhen Wang ◽  
Haizeng Liu ◽  
Md. Shakhaoath Khan
Keyword(s):  
Static Pressure ◽  
Cfd Simulation ◽  
Volume Fraction ◽  
Flow Characteristics ◽  
Pressure Profile ◽  
Reynolds Stress Model ◽  
Grid Scheme ◽  
Cylindrical Screen ◽  
The Right ◽  
Axial Depth

Three products hydrocyclone screen (TPHS) can be considered as the combination of a conventional hydrocyclone and a cylindrical screen. In this device, particles are separated based on size under the centrifugal classification coupling screening effect. The objective of this work is to explore the characteristics of fluid flow in TPHS using the computational fluid dynamics (CFD) simulation. The 2 million grid scheme, volume fraction model, and linear pressure–strain Reynolds stress model were utilized to generate the economical grid-independence solution. The pressure profile reveals that the distribution of static pressure was axisymmetric, and its value was reduced with the increasing axial depth. The maximum and minimum were located near the tangential inflection point of the feed inlet and the outlets, respectively. However, local asymmetry was created by the left tangential inlet and the right screen underflow outlet. Furthermore, at the same axial height, the static pressure gradually decreased along the wall to the center. Near the cylindrical screen, the pressure difference between the inside and the outside cylindrical screen dropped from positive to negative as the axial depth increased from −35 to −185 mm. Besides, TPHS shows similar distributions of turbulence intensity I, turbulence kinetic energy k, and turbulence dissipation rate ε; i.e., the values fell with the decrease in axial height. Meanwhile, from high to low, the pressure values are distributed in the feed chamber, the cylindrical screen, and conical vessel; the value inside the screen was higher than the outer value.

Fluid Flow Structure in Arterial Bypass Anastomosis

2005 ◽  
Vol 127 (4) ◽  
pp. 611-618 ◽  
Author(s):  
C. M. Su ◽  
D. Lee ◽  
R. Tran-Son-Tay ◽  
W. Shyy
Keyword(s):  
Fluid Flow ◽  
Flow Structure ◽  
Bypass Graft ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Complex Flow ◽  
Arterial Bypass ◽  
Flow Recirculation ◽  
Area Reduction ◽  
Complex Flow Structure

The fluid flow through a stenosed artery and its bypass graft in an anastomosis can substantially influence the outcome of bypass surgery. To help improve our understanding of this and related issues, the steady Navier-Stokes flows are computed in an idealized arterial bypass system with partially occluded host artery. Both the residual flow issued from the stenosis—which is potentially important at an earlier stage after grafting—and the complex flow structure induced by the bypass graft are investigated. Seven geometric models, including symmetric and asymmetric stenoses in the host artery, and two major aspects of the bypass system, namely, the effects of area reduction and stenosis asymmetry, are considered. By analyzing the flow characteristics in these configurations, it is found that (1) substantial area reduction leads to flow recirculation in both upstream and downstream of the stenosis and in the host artery near the toe, while diminishes the recirculation zone in the bypass graft near the bifurcation junction, (2) the asymmetry and position of the stenosis can affect the location and size of these recirculation zones, and (3) the curvature of the bypass graft can modify the fluid flow structure in the entire bypass system.

Preston-Static Tubes for the Measurement of Wall Shear Stress

1994 ◽  
Vol 116 (3) ◽  
pp. 645-649 ◽  
Author(s):  
Josef Daniel Ackerman ◽  
Louis Wong ◽  
C. Ross Ethier ◽  
D. Grant Allen ◽  
Jan K. Spelt
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Convenient Method ◽  
Pipe Flow ◽  
Total Pressure ◽  
Static Pressure ◽  
Shear Stresses ◽  
Streamline Curvature ◽  
Syringe Needle ◽  
Wall Shear

We present a Preston tube device that combines both total and static pressure readings for the measurement of wall shear stress. As such, the device facilitates the measurement of wall shear stress under conditions where there is streamline curvature and/or over surfaces on which it is difficult to either manufacture an array of static-pressure taps or to position a single tap. Our “Preston-static” device is easily and conveniently constructed from commercially available regular and side-bored syringe needles. The pressure difference between the total pressure measured in the regular syringe needle and the static pressure measured in the side-bored one is used to determine the wall shear stress. Wall shear stresses measured in pipe flow were consistent with independently determined values and values obtained using a conventional Preston tube. These results indicate that Preston-static tubes provide a reliable and convenient method of measuring wall shear stress.

Effects of magnetic field on blood flow with suspended copper nanoparticles through an artery with overlapping stenosis

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
C. Umadevi ◽  
G. Harpriya ◽  
M. Dhange ◽  
G. Nageswari
Keyword(s):  
Magnetic Field ◽  
Blood Flow ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Copper Nanoparticles ◽  
Analytical Solutions ◽  
Biomedical Applications ◽  
Flow Resistance ◽  
Cardiac Diseases ◽  
Stenosed Artery

The flow of blood mixed with copper nanoparticles in an overlapping stenosed artery is reported in the presence of a magnetic field. The presence of stenosis is known to impede blood flow and to be the cause of different cardiac diseases. The governing nonlinear equations are rendered dimensionless and attempted under the conditions of mild stenosis. The analytical solutions for velocity, resistance to the flow, wall shear stress, temperature, and streamlines are obtained and analyzed through graphs. The obtained outcomes show that the temperature variation in copper nanoparticles concentrated blood is more and flow resistance is less when compared to pure blood. The investigations reveal that copper nanoparticles are effective to reduce the hemodynamics of stenosis and could be helpful in biomedical applications.

Sign in / Sign up

Export Citation Format

Share Document