scholarly journals Augmented Reality Technology as a Complement on Graphic Design to Face Revolution Industry 4.0 Learning and Competence: The Development and Validity

2021 ◽  
Vol 15 (05) ◽  
pp. 116
Author(s):  
Asrul Huda ◽  
Nelda Azhar ◽  
Almasri Almasri ◽  
Rizky Ema Wulansari ◽  
Akrimullah Mubai ◽  
...  
Keyword(s):  
Augmented Reality ◽  
Learning Process ◽  
Graphic Design ◽  
Industrial Revolution ◽  
Survey Method ◽  
State University ◽  
Application Technology ◽  
Average Value ◽  
Augmented Reality Application ◽  
Augmented Reality Technology

This study aims at developing the augmented reality application technology, a complementary learning on graphic design to face the skills and learning of the industrial revolution 4.0. This study uses a 4D (four-D) development method for the development of augmented reality application technology and uses a survey method for validity. This AR application will be validated by 12 experts, while the respondents used in filling out the needs analysis questionnaire at the define stage (four-D) are students and lecturers of Informatics Engineering Education, Padang State University. The results of this study indicate that on the analysis of the achievement of the learning process, it can be seen that there are still expectations and advantages in the achievement of the learning process desired by lecturers and students, where the learning process is still in the sufficient category and 80%, students need development of technology as complement reality to be used as learning media in the learning process. The validation test also shows that the augmented reality application technology is included in the valid category with an average value of V value of 0.933. So, it cannot be denied that the augmented reality application technology is valid to be used in the learning process.

scholarly journals Augmented Reality: Daily Prayers for Preschooler Student

2018 ◽  
Vol 12 (1) ◽  
pp. 151 ◽  
Author(s):  
Hendra Pradibta
Keyword(s):  
Augmented Reality ◽  
Learning Process ◽  
Virtual Object ◽  
Learning Materials ◽  
Alternative Learning ◽  
After Effects ◽  
Adobe Illustrator ◽  
Augmented Reality Application ◽  
Augmented Reality Technology ◽  
Daily Prayer

Education is one of the aspects that many synthesized with technology. Yet, this is contrary to the fact that where most of the learning materials are still based on text. This research aims to develop an alternative learning media by implementing Augmented Reality Technology for Preschooler students. Augmented Reality (AR) is an application that can combine the virtual object as text, pictures and animation into the real world. Development of Augmented Reality application uses Web Aurasma Based Studio, with learning materials of daily prayer for preschool student. The development of the characters and the animations were using Adobe Illustrator and Adobe After Effects. The results of the study showed that technology Augmented Reality can be used as an alternative learning media especially in the learning process in Preschool Al Furqon. This is because the content Augmented Reality in the form of animation can gives more understanding and attention for preschool student to follow the learning process

Elements of Augmented Reality Application Design in Teaching and Learning Process

2020 ◽  
Vol 24 (02) ◽  
pp. 2583-2590
Author(s):  
Fadila Zuraida Mohd Nor ◽  
Fazlinda Ab Halim
Keyword(s):  
Augmented Reality ◽  
Learning Process ◽  
Teaching And Learning ◽  
Augmented Reality Application ◽  
Application Design

scholarly journals Впровадження технологій доповненої реальності у навчальному процесі з конструювання авіаційної техніки

2021 ◽  
pp. 110-118
Author(s):  
Олександр Володимирович Каратанов ◽  
Андрій Миколайович Биков ◽  
Марія Вадимівна Сергієнко ◽  
Дмитро Михайлович Мірошниченко
Keyword(s):  
Augmented Reality ◽  
Mixed Reality ◽  
Educational Process ◽  
Modern Education ◽  
Augmented Reality Application ◽  
The World ◽  
Augmented Reality Technology ◽  
Increase Productivity ◽  
Virtual And Augmented Reality ◽  
The Cost

This study examines augmented reality, which imposes on the world around us virtual objects, characters, filters, or other effects through a special camera. Currently, augmented reality is considered potential for pedagogical programs and it is beginning to gain momentum and be actively used. The use of augmented reality technology opens up new opportunities that increase productivity and efficiency in various industries, improve communication and knowledge transfer and make distance learning more comfortable and realistic. However, the factor of reducing the cost of production or the educational process due to the introduction of augmented reality is not yet fully disclosed and requires a detailed analysis, part of which is conducted in this paper. The existing types of augmented, virtual and mixed reality technologies were analyzed, their comparison was made, the current place in the market was determined, as well as their influence and role in modern education. The paper presents examples of the use of augmented reality technology in various fields, including in production, which demonstrates a significant increase in efficiency and confirms the relevance. An overview of the premises and laboratories, which now use virtual and augmented reality technologies for the educational process. The article also describes the shortcomings of the educational process, which can be corrected by introducing augmented reality technology. The economic benefit of using augmented reality in the educational process on a real example was calculated, due to which the expediency of this implementation was proved. Elements of the educational process are considered, the replacement of which with augmented reality will make education cheaper, and this means more accessible. An example of markers used for an augmented reality application in the field of aircraft construction is given. The tendency of the application of augmented reality and use in the educational process for the next years is analyzed, the branches in which it can be applied are considered and the expediency of its use is confirmed.

Utilizing Augmented Reality in Library Information Search

2014 ◽  
pp. 93-102
Author(s):  
Robert Gibson
Keyword(s):  
Augmented Reality ◽  
Information Search ◽  
Extra Dimensions ◽  
Sensory Information ◽  
State University ◽  
Sheet Music ◽  
Special Collections ◽  
Augmented Reality Application ◽  
Physical Barriers ◽  
The Many

A cross-disciplinary academic team at Emporia State University is currently in the process of developing and utilizing a mobile-based augmented reality application in the context of library information search. Specifically, the team is researching the use of mobile applications that can generate multi-sensory information retrieval relative to archives and special collections. Using this application, student and faculty researchers can physically point their mobile devices at an archival object that has been specifically marked with a photo-generated “tag” and, using specially designed software, access videos, photos, music, text, and other data that is germane to the object. This allows the archivist to preserve the object behind protective glass or other physical barriers, while allowing the information seeker to learn more about the object using embedded multimedia. This minimizes the potential for damage while providing extra dimensions of information. Of the many virtualizations currently under development are videos related to a rare novel and music compositions relative to rare sheet music – both currently housed within Special Collections at Emporia State University.

scholarly journals Development of a Motion Sensing and Automatic Positioning Universal Planisphere Using Augmented Reality Technology

2017 ◽  
Vol 2017 ◽  
pp. 1-13
Author(s):  
Wernhuar Tarng ◽  
Jiong-Kai Pan ◽  
Chiu-Pin Lin
Keyword(s):  
Augmented Reality ◽  
Mobile Devices ◽  
Mobile Device ◽  
Learning Process ◽  
Motion Sensing ◽  
Correct Position ◽  
Astronomy Education ◽  
Augmented Reality Technology ◽  
Automatic Positioning ◽  
Electronic Compass

This study combines the augmented reality technology and the sensor functions of GPS, electronic compass, and 3-axis accelerometer on mobile devices to develop a motion sensing and automatic positioning universal planisphere. It can create local star charts according to the current date, time, and position and help users locate constellations on the planisphere easily through motion sensing operation. By holding the mobile device towards the target constellation in the sky, the azimuth and elevation angles are obtained automatically for mapping to its correct position on the star chart. The proposed system combines observational activities with physical operation and spatial cognition for developing correct astronomical concepts, thus making learning more effective. It contains a built-in 3D virtual starry sky to enable observation in classroom for supporting teaching applications. The learning process can be shortened by setting varying observation date, time, and latitude. Therefore, it is a useful tool for astronomy education.

Efficient Creation of Augmented Reality Content by Using an Intuitive Authoring System

2004 ◽  
Author(s):  
Carsten Matysczok ◽  
Peter Ebbesmeyer ◽  
Holger Krumm ◽  
Jo¨rg Maciej
Keyword(s):  
Augmented Reality ◽  
3D Models ◽  
Technological Knowledge ◽  
Software Tools ◽  
Authoring System ◽  
Recent Advances ◽  
Augmented Reality Application ◽  
Augmented Reality Technology ◽  
The Creation ◽  
User Friendly

Recent advances have shown, that the base technology of augmented reality have matured the point of being usable only by specialists. But existing augmented reality applications are still prototypes. They are developed without any authoring system, only by software experts. To support the wide use of augmented reality technology, the designers of augmented reality application need methods and software tools to create the contents in a fast and cheap way. In this paper we describe an authoring system for creating augmented reality content in an easy and user friendly way. The system allows the creation of augmented reality applications in a straight forward way. By using meta-constructs like menus, selection lists or hotspots as well as illustration objects like 3D-models, videos, texts and sounds a variety of applications can be created without previous technological knowledge. A preview window is also part of the authoring system displaying the actual created AR-application.

scholarly journals The Methodology of Using Augmented Reality Technology in the Training of Future Computer Science Teachers

2021 ◽  
pp. 1-20
Author(s):  
Nadiia Balyk ◽  
Inna Grod ◽  
Yaroslav Vasylenko ◽  
Galyna Shmyger ◽  
Vasyl Oleksiuk
Keyword(s):  
Augmented Reality ◽  
Computer Science ◽  
Science Teachers ◽  
Digital Data ◽  
Literature Analysis ◽  
Future Teachers ◽  
Augmented Reality Application ◽  
Cognitive Experience ◽  
Augmented Reality Technology ◽  
Object Of Study

The paper describes the concept of augmented reality. Based on literature analysis, the authors claim that augmented reality technology enriches human experiences with digital data. The introduction of augmented reality applications and services provides an opportunity to increase the realism of research, while also offering an enhanced emotional and cognitive experience. Therefore, it can be an effective tool for the organization of learning in schools, colleges and universities.Augmented reality technologies can be interesting as an object of study as well. To do this, scientists need to design, develop and test appropriate methodologies.This paper explores one of the components of such techniques. The authors analysed several platforms for creating augmented reality applications. Unity, Vuforia and 3d-Studio were chosen for the purpose of analysis. Using them, the authors developed a fragment of the content of education. It contains instructionsfor creating an augmented reality application. The paper contains the author’s account of the process of training future teachers of computer science at Ternopil Volodymyr Hnatiuk National Pedagogical University (Ukraine). Based on the conducted study, the authors claim that students showed considerable interest in augmented reality technologies and the content of their training.

scholarly journals Augmented Reality Application to Efficiency the Process of Making Batik Motifs Using Vertex Marker

2019 ◽  
Vol 4 (3) ◽  
pp. 267
Author(s):  
Wahyu Teja Kusuma ◽  
Herman Tolle ◽  
Ahmad Afif Supianto
Keyword(s):  
Augmented Reality ◽  
Process Time ◽  
Traditional Methods ◽  
Augmented Reality Application ◽  
Augmented Reality Technology ◽  
Digital Objects ◽  
Fabric Surface

From the total time of making traditional Batik, the batik stage is the most time consuming because there are a lot of mistakes due to lack of carefulness when making batik motifs on cloth. To overcome the problem of making Batik motifs, this research utilizes the strengths and capabilities of Marker-Based Augmented Reality technology. The development of Marker-Based Augmented Reality applications is done by replacing digital objects with Batik motif images and markers attached to the fabric. Development of Marker-Based Augmented Reality applications using vertex markers to reproduce Batik motif objects in order to overcome the limitations of the reach of hands when making Batik motifs on fabric Finally, by using Marker-Based Augmented Reality applications batik makers do not need to draw Batik motifs in pencil on fabric because of Batik motifs directly displayed on the fabric surface by the application, so that it is expected to reduce the process time of making Batik motifs compared to making Batik motifs using traditional methods.

scholarly journals PERANCANGAN DAN PEMBUATAN MEDIA PEMBELAJARAN AUGMENTED REALITY PADA PENGAJARAN TEKNIK ELEKTRONIKA

2019 ◽  
Vol 7 (3) ◽  
pp. 128
Author(s):  
Iim Abdul Rohim ◽  
Putra Jaya
Keyword(s):  
Augmented Reality ◽  
Architectural Design ◽  
Average Score ◽  
Electronic Components ◽  
Development Environment ◽  
Average Value ◽  
Electronic Engineering ◽  
Augmented Reality Technology ◽  
The Media ◽  
Feasibility Test

This study aims to produce learning media for electronic components using Augmented Reality technology by knowing the performance and magnitude of the feasibility value of learning media for electronic components using the Augmented Reality technology. Designing and making applications using the steps of the waterfall method include: 1) Designing, 2) Architectural Design and Interfaces, 3) Encoding / Programming, and 4) Testing. Application programs are made with laptops that have Intel®core ™ i3 [email protected] processor specifications, 4.00GB RAM, Intel® HD Graphics520, 1TB hard drive, with a Windows 10 Pro 64-bit X64 operating system. Integrated Development Environment (IDE) in making this application is Unity 2018.3.6f1 with the marked based tracking method. Based on the results of the feasibility test conducted by two material experts as well as two media experts, that in the aspect of application material got an average value of a total score of 63 out of 68. In the media aspect the application got an average score of 84.5 from the total score of 96 Both of these scores give interpretation that the application of Augmented Reality learning media in teaching electronic engineering is very feasible to be used as a learning media.Keywords: Augmented Reality, Learning Media, Electronic Engineering, Unity 3D

scholarly journals Development of android based augmented reality video for tennis courts learning

2021 ◽  
Vol 6 (2) ◽  
pp. 218-230
Author(s):  
Galang Sulaksono
Keyword(s):  
Life Cycle ◽  
Augmented Reality ◽  
A Value ◽  
Assessment Of Learning ◽  
Development Life Cycle ◽  
Multimedia Development ◽  
Augmented Reality Application ◽  
Augmented Reality Technology ◽  
Tennis Court

This research aims to develop an android-based augmented reality application called AR Tennis. The resulted product is used as a medium for learning tennis courts courses. The AR Tennis application helps students understand the illustrations contained in courts tennis textbooks. The picture in the book which is originally only a silent illustration, with the help of the AR Tennis application, the image will move. The method used is MDLC (Multimedia Development Life Cycle). Testing the application using the blackbox method and the results are all components of the application function properly. From the results of the assessment of learning media experts obtained a value of 97.6 with a very good category. From the expert on tennis material, the score is 89.2 with a good category. And trials for students who take part in tennis court scored 92.14 in the appropriate category for use. Augmented reality technology is still not popular in the field of education. But going forward this technology will be very helpful in any study in the education.

Sign in / Sign up

Export Citation Format

Share Document