Finite Element Modeling and Analysis for a Certain Urban Bus Frame

2013 ◽  
Vol 433-435 ◽  
pp. 2239-2245
Author(s):  
Ya Hui Li ◽  
Wei Dong Luo ◽  
Rui Zhou
Keyword(s):  
Finite Element ◽  
Element Model ◽  
The Body ◽  
Body Frame ◽  
Cross Sectional ◽  
Modeling And Analysis ◽  
Calculation Results ◽  
Bus Body ◽  
Urban Bus ◽  
Set Up

Using CATIA set up a 3d model of urban bus frame in this paper, And ANSYS13.0 is used to establish the body frame finite element model of the certain urban bus body frame, Based on this model, the static characteristics under various conditions were analyzed, and the features of stress and strain distribution are gotten. Through the analysis of calculation results, we can conclude that this body frame around the column to the rear windscreen beam junction strength in insufficient, need to increase cross-sectional area of the left column; The floor behind driver seats strength is not enough, need to add two beams to strengthen the support. And the calculation result shows that the rest of the frame has a certain extent optimization space, and can provide the basis for the next step of lightweight.

Electric Bus Body Lightweight Design Based on Multiple Constrains

2012 ◽  
Vol 538-541 ◽  
pp. 3137-3144 ◽  
Author(s):  
Wen Wei Wang ◽  
Cheng Jun Zhou ◽  
Cheng Lin ◽  
Jiao Yang Chen
Keyword(s):  
Finite Element ◽  
Lightweight Design ◽  
Element Model ◽  
The Body ◽  
Body Frame ◽  
Electric Bus ◽  
Free Model ◽  
Bus Body ◽  
The Finite Element Model ◽  
Torsion Condition

The finite-element model of pure electric bus has been built and the free model analysis, displacement and stress analysis under bending condition and torsion condition have been conducted. Optimally design the pure electric bus frame based on multiple constrains. Reduce the body frame quality by 4.3% and meanwhile meet the modal and stress requirements.

Model and Finite Element Analysis of a Bus Body

2012 ◽  
Vol 605-607 ◽  
pp. 596-599
Author(s):  
Feng Wang ◽  
Qin Man Fan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
The Body ◽  
Body Frame ◽  
Element Analysis ◽  
Maximum Deformation ◽  
Emergency Braking ◽  
Computing Platform ◽  
Bus Body ◽  
Stress And Deformation

ANSYS is used as the finite element computing platform to analysis a certain type of bus body frame under four load conditions of bending conditions, reversing conditions, the bending and torsion conditions and the emergency braking conditions. The constraints and load approach in the four conditions are given in this paper. A certain type of bus body skeleton program and the finite element analysis are conduct. The result shows that: (1) Bus body frame changing brings the re-distribution of the stress, making the overall stress and deformation of the body skeleton relatively uniform. (2) The improved program makes more than 250KG weight losing of the body frame and the changing location of the maximum deformation under the bending conditions. The maximum bending deform increased is only 8.92%.

Structural Optimization of Packer’ Cone with Material Properties and Mechanics Parameters Based on ANSYS

2012 ◽  
Vol 252 ◽  
pp. 172-175
Author(s):  
Zhi Ping Guo ◽  
Wei Guo ◽  
Yan Fei Wang ◽  
Guan Fu Li ◽  
Yan Zheng Lu
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Material Properties ◽  
Theoretical Basis ◽  
Cone Angle ◽  
Element Model ◽  
Mechanical Analysis ◽  
Calculation Results ◽  
Set Up ◽  
The Finite Element Model

Cone is one part of a packer. To understand the seal effectiveness of the packer, mechanical analysis must be made for it. The finite element model of packer is set up and packer minimum setting load changes are calculated under different climb angle of cone. Results show that reduce the cone angle of climb can make the packer sealing load significantly lower.The calculation results provide the theoretical basis for the real operation.

scholarly journals Finite element model of laminate construction element with multi-phase microstructure

2020 ◽  
Vol 27 (1) ◽  
pp. 405-414
Author(s):  
Jerzy Marszałek ◽  
Jacek Stadnicki ◽  
Piotr Danielczyk
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Bending Test ◽  
Cross Sectional ◽  
Limit Values ◽  
Construction Element ◽  
Calculation Results ◽  
Strength And Stiffness ◽  
Sectional Parameters

AbstractThe article describes a method of creating a mesoscale finite element model of a fabric reinforced laminate that replicates the smallest repetitive fragment of its microstructure – RUC (Repetitive Unit Cell). The model takes into account the influence of the number and orientation of layers, the weave of the reinforcement fabric as well as manufacturing technology on the strength and stiffness of the laminate. The constants of the finite elements forming RUC (equivalent cross-sectional parameters, limit values of forces ensuring layer integrity) are determined experimentally by performing uncomplicated tests of specimens of a particular laminate. A special preprocessor was developed to generate the finite element model of the construction element from laminate, which automatically creates the so-called batch file defining the model. The usefulness of the preprocessor was checked by simulating a three-point bending test of a laminate door beam of a passenger car. The obtained calculation results were verified experimentally.

Bi-Level Optimization for Cross-Sectional Size of Bus Body

2013 ◽  
Vol 437 ◽  
pp. 434-438 ◽  
Author(s):  
Jing Xin Na ◽  
Jian Feng Gao
Keyword(s):  
Line Search ◽  
Lightweight Design ◽  
Optimization Method ◽  
The Body ◽  
Design Stage ◽  
Concept Design ◽  
Body Frame ◽  
Cross Sectional ◽  
Multi Objective ◽  
Bus Body

A bi-level optimization method, integrating both local line search and overall multi-objective optimization, is proposed aiming to provide a solution for lightweight design of integral bus bodies. On the first level, the lightest structure under the strength condition is obtained via implementing line-search process in local bar models of the body frame based on the section libraries. On the second level, the design variables are screened by means of sensitivity analysis, and then the bus body structure is optimized by using the multi-objective genetic algorithm. This approach is implemented into an integral bus body frame during the concept design stage. It is verified that the obtained structure scheme is 10.57% lighter than the target bus model and the major mechanical performances are also better than the target one.

Finite Element Model of Human Cochlea Considering of the Helicotrema Size

2013 ◽  
Vol 456 ◽  
pp. 576-581 ◽  
Author(s):  
Li Fu Xu ◽  
Na Ta ◽  
Zhu Shi Rao ◽  
Jia Bin Tian
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Basilar Membrane ◽  
Round Window ◽  
Element Model ◽  
Oval Window ◽  
Fe Model ◽  
Cochlear Duct ◽  
Human Cochlea ◽  
Set Up

A 2-D finite element model of human cochlea is established in this paper. This model includes the structure of oval window, round window, basilar membrane and cochlear duct which is filled with fluid. The basilar membrane responses are calculated with sound input on the oval window membrane. In order to study the effects of helicotrema on basilar membrane response, three different helicotrema dimensions are set up in the FE model. A two-way fluid-structure interaction numerical method is used to compute the responses in the cochlea. The influence of the helicotrema is acquired and the frequency selectivity of the basilar membrane motion along the cochlear duct is predicted. These results agree with the experiments and indicate much better results are obtained with appropriate helicotrema size.

Study on the Prediction of Drilling Forces on Cortical Bone Based on Finite Element Simulation

2013 ◽  
Vol 589-590 ◽  
pp. 157-162
Author(s):  
Ya Hui Hu ◽  
Qing Yun Zhang ◽  
Xiao Yu Yue
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Feed Rate ◽  
Orthogonal Experiment ◽  
Element Model ◽  
Drilling Speed ◽  
Drilling Force ◽  
Drill Diameter ◽  
Potential Damage ◽  
Set Up

The changes of drilling forces during bone drilling provide a useful index for evaluating the risk of potential damage to the bone. The aim of the work is that an elastic-plastic dynamic finite element model is used to simulate the process of a drill bit drilling through the bone. The finite element model was set up in the Abaqus6.11; the prediction model of the drilling force was gotten by using the regression orthogonal experiment and data processing software Matlab7.0. Diverse values of drilling speed, feed rate and drill diameter are important factors which will lead to changes in the drilling forces. By controlling the drilling parameters can obtain the optimal drilling force. The results show that the diameter has the greatest influence on the drilling force, the drilling speed the second, the feed rate the last.

Topology Optimization Design of High Pressure Storage Tank Structure

2012 ◽  
Vol 430-432 ◽  
pp. 828-833
Author(s):  
Qiu Sheng Ma ◽  
Yi Cai ◽  
Dong Xing Tian
Keyword(s):  
Finite Element ◽  
High Pressure ◽  
Topology Optimization ◽  
Storage Tank ◽  
Optimization Design ◽  
Influence Factors ◽  
Element Model ◽  
Design Variables ◽  
Calculation Results ◽  
Pressure Storage

In this paper, based on ANSYS the topology optimization design for high pressure storage tank was studied by the means of the finite element structural analysis and optimization. the finite element model for optimization design was established. The design variables influence factors and rules on the optimization results are summarized. according to the calculation results the optimal design result for tank is determined considering the manufacturing and processing. The calculation results show that the method is effective in optimization design and provide the basis to further design high pressure tank.

Contribution of Lamb wave modes in the formation of higher order modes cluster (HOMC) guided waves

2021 ◽  
pp. 095440622110424
Author(s):  
Z Abbasi ◽  
F Honarvar
Keyword(s):  
Finite Element ◽  
Wave Packet ◽  
Lamb Wave ◽  
Guided Waves ◽  
Element Model ◽  
Higher Order ◽  
Guided Wave ◽  
Cross Sectional ◽  
Higher Order Modes ◽  
Wave Modes

In recent years, Higher Order Modes Cluster (HOMC) guided waves have been considered for ultrasonic testing of plates and pipes. HOMC guided waves consist of higher order Lamb wave modes that travel together as a single nondispersive wave packet. The objective of this paper is to investigate the effect of frequency-thickness value on the contribution of Lamb wave modes in an HOMC guided wave. This is an important issue that has not been thoroughly investigated before. The contribution of each Lamb wave mode in an HOMC guided wave is studied by using a two-dimensional finite element model. The level of contribution of various Lamb wave modes to the wave cluster is verified by using a 2D FFT analysis. The results show that by increasing the frequency-thickness value, the order of contributing modes in the HOMC wave packet increases. The number of modes that comprise a cluster also increases up to a specific frequency-thickness value and then it starts to decrease. Plotting of the cross-sectional displacement patterns along the HOMC guided wave paths confirms the shifting of dominant modes from lower to higher order modes with increase of frequency-thickness value. Experimental measurements conducted on a mild steel plate are used to verify the finite element simulations. The experimental results are found to be in good agreement with simulations and confirm the changes observed in the level of contribution of Lamb wave modes in a wave cluster by changing the frequency-thickness value.

Calculating Mechanics Characteristics of Single-Walled Carbon Nanotube Materials by Finite Element Method

2017 ◽  
Vol 730 ◽  
pp. 548-553
Author(s):  
Jing Ge ◽  
Hao Jiang ◽  
Zhen Yu Sun ◽  
Guo Jun Yu ◽  
Bo Su ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Radial Direction ◽  
Element Model ◽  
Beam Element ◽  
Beam Position ◽  
Single Walled Carbon ◽  
Finite Element Software ◽  
Calculation Results ◽  
The Moment

In this paper, we establish the mechanical property analysis of Single-walled Carbon Nanotubes (SWCNTs) modified beam element model based on the molecular structural mechanics method. Then we study the mechanical properties of their radial direction characteristics using the finite element software Abaqus. The model simulated the different bending stiffness with rectangular section beam elements C-C chemical force field. When the graphene curled into arbitrary chirality of SWCNTs spatial structure, the adjacent beam position will change the moment of inertia of the section of the beam. Compared with the original beam element model and the calculation results, we found that the established model largely reduced the overestimate of the original model of mechanical properties on the radial direction of the SWCNTs. At the same time, compared with other methods available in the literature results and the experimental data, the results can be in good agreement.

Sign in / Sign up

Export Citation Format

Share Document