Electrical Contact Properties of Micro-Injection Molded Polypropylene/CNT/CB-Composites on Metallic Electrodes

2015 ◽  
Vol 1103 ◽  
pp. 77-83 ◽  
Author(s):  
Michael Heinrich ◽  
Ricardo Decker ◽  
Joerg Schaufuss ◽  
Juergen Troeltzsch ◽  
Jan Mehner ◽  
...  
Keyword(s):  
Injection Molding ◽  
Large Scale ◽  
Electrical Contact ◽  
Influential Factors ◽  
Scale Production ◽  
Micro Injection Molding ◽  
Micro Electro Mechanical Systems ◽  
Aspect Ratios ◽  
Injection Molded ◽  
The One

The investigations carried out under this work dealing with a new field of application for large-scale production of electric contacting processes for micro-electro-mechanical systems (MEMS) using the micro-injection molding technology. The focus of this article is the analysis of process-related influential factors of micro-injection molding that determines both the electrical resistivity and the flowability of polymer nanocomposites filled with carbon nanotubes (CNT) and carbon black (CB). For that, the viscosity and the electrical conductivity as a function of different CNT-and CB-contents and their combination were investigated in a manufacturing study for Polypropylene. The results of the investigations answered questions regarding material science and technical processes. By this, optimal rheological properties for formation of micro injection molded conductive patterns with high aspect ratios on the one side and with the best possible conductivity of the nanocomposites on the other side can be set.

A Ceramic Tubular Probe For Online Substance Concentration Measurement, Manufactured By Ceramic Injection Molding

2012 ◽  
Vol 2012 (1) ◽  
pp. 000604-000608
Author(s):  
Matthias Hartmann ◽  
Bertram Schmidt
Keyword(s):  
Injection Molding ◽  
Zirconium Oxide ◽  
Large Scale ◽  
Low Cost ◽  
Tetragonal Zirconia ◽  
Scale Production ◽  
Ceramic Injection Molding ◽  
Substance Concentration ◽  
Sensor Effect ◽  
Concentration Measurements

The current research presents recent respective to the work development of a ceramic tubular probe for online substance concentration measurements. The aim was to develop a robust and acid-resistant sensor device, which can be easily included in existing procedural pipeline systems. To archive those goals a lot of factors had to be checked. For the substance concentration measurements a capacitive sensor effect was chosen. With this method even low substance concentrations down to one-tenth of a per cent can be indentified. For the package material zirconium oxide (tetragonal zirconia polycrystal – TZP) was used. Zirconium oxide is a technical ceramic which is wear-resistant, acid-resistant, has a low thermal conductivity, is electrically isolating and can be uses in a ceramic injection molding (CIM) process. In the phase of the sensor design process multiple geometries for the sensor effect and integration space for the evaluation electronics had to be considered. A standardized DN 10 DIN 32676 flanged joint was also added for an unproblematic connection to the pipelines. All these needed geometries had to be integrated into one ceramic element. As a result of these requirements a 3D CAD model of the sensor element was designed. The CAD-file has shown that there was only the CIM technology left to comprehend developed sensor geometry. CIM is a low cost process for large-scale production which is distinguished by high size accuracy. In the CIM process the material shrinkage, this is caused by the needed debindering and sintering steps, had to be considered. The developed ceramic tubular probe was successfully tested in multiple fluidic systems. It has left the test phase and is now ready for maturity phase.

scholarly journals Bacteriophages and the One Health Approach to Combat Multidrug Resistance: Is This the Way?

Antibiotics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 414
Author(s):  
Mary Garvey
Keyword(s):  
Large Scale ◽  
One Health ◽  
Bacterial Resistance ◽  
Therapeutic Potential ◽  
Methicillin Resistance ◽  
Bacterial Species ◽  
Emerging Diseases ◽  
Scale Production ◽  
Essential Components ◽  
The One

Antimicrobial resistance necessitates action to reduce and eliminate infectious disease, ensure animal and human health, and combat emerging diseases. Species such as Acinetobacter baumanniii, vancomycin resistant Enterococcus, methicillin resistance Staphylococcus aureus, and Pseudomonas aeruginosa, as well as other WHO priority pathogens, are becoming extremely difficult to treat. In 2017, the EU adopted the “One Health” approach to combat antibiotic resistance in animal and human medicine and to prevent the transmission of zoonotic disease. As the current therapeutic agents become increasingly inadequate, there is a dire need to establish novel methods of treatment under this One Health Framework. Bacteriophages (phages), viruses infecting bacterial species, demonstrate clear antimicrobial activity against an array of resistant species, with high levels of specificity and potency. Bacteriophages play key roles in bacterial evolution and are essential components of all ecosystems, including the human microbiome. Factors such are their specificity, potency, biocompatibility, and bactericidal activity make them desirable options as therapeutics. Issues remain, however, relating to their large-scale production, formulation, stability, and bacterial resistance, limiting their implementation globally. Phages used in therapy must be virulent, purified, and well characterized before administration. Clinical studies are warranted to assess the in vivo pharmacokinetics and pharmacodynamic characteristics of phages to fully establish their therapeutic potential.

scholarly journals Characterization of Stereolithography Printed Soft Tooling for Micro Injection Molding

Micromachines ◽  
2020 ◽  
Vol 11 (9) ◽  
pp. 819 ◽  
Author(s):  
Daniel Dempsey ◽  
Sean McDonald ◽  
Davide Masato ◽  
Carol Barry
Keyword(s):  
Aspect Ratio ◽  
Injection Molding ◽  
Raw Materials ◽  
Tool Material ◽  
Mold Temperature ◽  
Micro Injection Molding ◽  
Digital Light Processing ◽  
Electron Microscopies ◽  
Aspect Ratios ◽  
The Impact

The use of microfeature-enabled devices, such as microfluidic platforms and anti-fouling surfaces, has grown in both potential and application in recent years. Injection molding is an attractive method of manufacturing these devices due to its excellent process throughput and commodity-priced raw materials. Still, the manufacture of micro-structured tooling remains a slow and expensive endeavor. This work investigated the feasibility of utilizing additive manufacturing, specifically a Digital Light Processing (DLP)-based inverted stereolithography process, to produce thermoset polymer-based tooling for micro injection molding. Inserts were created with an array of 100-μm wide micro-features, having different heights and thus aspect ratios. These inserts were molded with high flow polypropylene to investigate print process resolution capabilities, channel replication abilities, and insert wear and longevity. Samples were characterized using contact profilometry as well as optical and scanning electron microscopies. Overall, the inserts exhibited a maximum lifetime of 78 molding cycles and failed by cracking of the entire insert. Damage was observed for the higher aspect ratio features but not the lower aspect ratio features. The effect of the tool material on mold temperature distribution was modeled to analyze the impact of processing and mold design.

scholarly journals PVB/PEG-Based Feedstocks for Injection Molding of Alumina Microreactor Components

Materials ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1219 ◽  
Author(s):  
Anna Julia Medesi ◽  
Dorit Nötzel ◽  
Thomas Hanemann
Keyword(s):  
Injection Molding ◽  
Large Scale ◽  
Metal Oxide Nanoparticles ◽  
Reaction Medium ◽  
Cost Effective ◽  
Polyvinyl Butyral ◽  
Shear Stresses ◽  
Scale Production ◽  
Ceramic Injection Molding ◽  
Functional Components

The ceramic injection molding (CIM) process is a cost-effective powder-based near net shape manufacturing process for large-scale production of complex-shaped ceramic functional components. This paper presents the rheological analysis of environmentally friendly CIM feedstock formulations based on the binder components polyvinyl butyral (PVB) and polyethylene gycol (PEG). The prepared PVB/PEG-based alumina molding compounds were investigated with respect to their PVB:PEG ratios as well as to their powder filling degrees in the range between 50 and 64 vol.%. Corresponding viscosities and shear stresses were determined for increasing shear rates to show the effects of increased PEG content and solid loadings on them. Two single reactor components were injection molded and subsequently joined in their green state for fabrication of an alumina microreactor. The intended purpose of the alumina microreactors is their potential application as wear-resistant and hydrothermal stable multifunctional devices (µ-mixer, µ-reactor, µ-analyzer) for continuous hydrothermal synthesis (CHTS) of metal oxide nanoparticles in supercritical water (sc-H2O) as the reaction medium.

Warpage Measurement of a Micro Electrical Fan on Micro-Injection Molding

2012 ◽  
Vol 184-185 ◽  
pp. 1651-1654
Author(s):  
Jeou Long Lee ◽  
Y. Lin ◽  
Y.K. Shen
Keyword(s):  
Injection Molding ◽  
Injection Pressure ◽  
Acrylonitrile Butadiene Styrene ◽  
Mold Temperature ◽  
Micro Injection Molding ◽  
Optimum Result ◽  
Suitable Material ◽  
Packing Pressure ◽  
Injection Molded ◽  
Packing Time

This study characterizes warpage of a micro-injection molded micro electrical fan using the Michelson interference method. This study conducts experiments to analyze different polymers-polypropylene (PP), polyamide (PA), acrylonitrile-butadiene styrene (ABS), ABS+ polycarbonate (PC), and polyoxymethylene (POM)-process parameters, such as mold temperature, injection temperature, injection pressure, injection time, packing time, and packing pressure, for a micro electrical fan. To obtain the optimum result (minimum warpage), this study assesses the effect (warpage) of each material on micro-injection molding. PA plastic is the very suitable material for micro electrical fan with Michelson interference analysis on micro-injection molding.

A Simple and Effective Method for the Preparation of Porous Graphene Nanosheets

2015 ◽  
Vol 719-720 ◽  
pp. 123-126
Author(s):  
Jin Sun ◽  
Qing Zhong Xue ◽  
Yong Gang Du ◽  
Fu Jun Xia ◽  
Qi Kai Guo
Keyword(s):  
Large Scale ◽  
Graphene Nanosheets ◽  
Scale Production ◽  
Green Method ◽  
Porous Graphene ◽  
Large Scale Production ◽  
Potential Applications ◽  
One Step ◽  
Autogenous Pressure ◽  
The One

Porous graphene is a collection of graphene-related materials which exhibits properties distinct from those of graphene, and it has widespread potential applications in various fields. Several approaches have been developed to produce porous graphene. However, the large-scale production of porous graphene nanosheets still remains a great challenge. Moreover, the costs of some methods are prohibitive for its commercial production and the processes are too complicated and time-consuming. In this work, we propose a simple and green method by which graphene nanosheets can be etched by sodium hydroxide under autogenous pressure at 180 °C. The morphologies and surface elements of the porous graphene nanosheets and sizes of pores were characterized. It is demonstrated that the one-step etching of graphene nanosheets is an effective method to obtain large-scale porous graphene nanosheets with high and uniform porosity. The pores in the porous graphene nanosheets were 6 nm depth (the same as the thickness of the graphene nanosheets) and 30-50 nm width.

Metal and Ceramic Micro Components Made by Powder Injection Molding

2007 ◽  
Vol 534-536 ◽  
pp. 373-376 ◽  
Author(s):  
Volker Piotter ◽  
G. Finnah ◽  
B. Zeep ◽  
Robert Ruprecht ◽  
Jürgen Haußelt
Keyword(s):  
Injection Molding ◽  
Large Scale ◽  
Ceramic Materials ◽  
Powder Injection Molding ◽  
Tungsten Alloy ◽  
Powder Injection ◽  
Scale Production ◽  
Large Scale Production ◽  
Scope Of Application ◽  
Tungsten Powders

To overcome the lack of micro manufacturing processes suitable for medium and large scale production as well as to process high resistive materials a special variant of micro injection molding is currently under development: micro powder injection molding (MicroPIM), which already enables the manufacturing of finest detailed components with structure sizes down to a few ten micrometer. In order to expand the scope of application of MicroPIM, tests are being conducted with pure tungsten powders or tungsten alloy powders. As further improvement, micro twocomponent injection molding allows, for example, the fabrication of micro components consisting of two ceramic materials with different physical properties.

Secondary Industries for Tropical Africa

Africa ◽  
1943 ◽  
Vol 14 (4) ◽  
pp. 170-176 ◽  
Author(s):  
Theresa Cahan
Keyword(s):  
Large Scale ◽  
Good Effect ◽  
Scale Production ◽  
Tropical Africa ◽  
Large Numbers ◽  
Large Scale Production ◽  
Initial Stage ◽  
The One ◽  
Opening Paragraph ◽  
Laborious Method

Opening ParagraphThere is a tendency in some quarters to regard secondary industries as a panacea for all the economic ills of tropical Africa. It would be well at this initial stage to sound a note of warning. In the past, the industrialization of agricultural countries has had two results: one good, one bad. On the one hand, the establishment in a country of labour-saving machinery and large-scale production in place of the old laborious method of making things by hand has led to a rise in the general standard of living within the country in terms of real incomes. On the other hand, the drift of workers to the towns and the herding together of large numbers of people in factories resulted in the sum of social evils associated with the ‘dark satanic mills’: overcrowding, sweated labour, destitution, unemployment, and many more. The problem for tropical Africa to-day is to combine the maximum of the first and good effect with a minimum of the second evil.

Sign in / Sign up

Export Citation Format

Share Document