Test and Research to the Dank Ratio of Woven Filtering Fabric

2011 ◽  
Vol 332-334 ◽  
pp. 916-919
Author(s):  
Gui Fen Yao ◽  
Jian Hua Yin ◽  
Hai Wen Liu
Keyword(s):  
Water Permeability ◽  
Performance Indicator ◽  
Woven Fabrics ◽  
National Standards ◽  
Test Results ◽  
Quality Of Water ◽  
Relationship Of ◽  
The Relationship

No matter for clothes fabric or industry fabric, the water permeability is an important performance indicator. In order to explore relationship of the water permeability of woven filtering fabrics with the fabric structure parameters, we design sixteen fabric. According to the national standards of determination of water permeability of woven filtering fabric, we test the dank ratio of the design fabric. In this paper we analysis the water permeability and structure parameter of woven filtering fabric with test the quality of water on some time through woven fabrics. We calculated the dank ratio from the water permeable quality and other parameters. The results indicate that, the effect of fabric texture on the dank ratio of woven fabrics is that the dank ratio of the plain weave is the smallest and the satin weave is the biggest. In addition, the relationship between overall covering factor and water permeability showed that the water permeability decreases along with the overall covering factor increasing. A linear regression equation between dank ratio and overall covering factor is get from the test results. In order to get big dank ratio, we should produce fabric with satin weave and lower overall covering factor.

scholarly journals Dentin reactions to caries are misinterpreted by histological “gold standards”

F1000Research ◽  
2014 ◽  
Vol 3 ◽  
pp. 13 ◽  
Author(s):  
Priscila Florentino Silva ◽  
Danilo Augusto de Holanda Ferreira ◽  
Kássia Regina Simões Meira ◽  
Franklin Delano Soares Forte ◽  
Ana Maria Barros Chaves ◽  
...  
Keyword(s):  
Polarized Light ◽  
Occlusal Caries ◽  
Dentin Mineralization ◽  
The One ◽  
Relationship Of ◽  
The Relationship ◽  
Caries Lesions ◽  
Gold Standards

Dentin reactions to caries, crucial for pathogenesis and for the determination of the severity of caries lesions, are believed to be reasonably detected by stereomicroscopy (SM) and polarized light microscopy in quinoline (PLMQ), but accuracies are not available. Here, stereomicroscopy of wet (SW) and dry (SD) ground sections of natural occlusal caries lesions resulted in moderate (0.7, for normal dentin) and low accuracies (< 0.6, for carious and sclerotic dentin) as validated by contrast-corrected microradiography. Accuracies of PLMQ were moderate for both normal (0.71) and carious dentin (0.71). The hypothesis that detection of dentin reactions by SM and PLMQ would be influenced by the contrast quality of micrographic images was rejected. Dentin reactions were scored by SW, SD, PLMQ, and three types of microradiographic images with varying contrast qualities and each technique was compared against the one that resulted in the highest number of scores for each dentin reaction. Large differences resulted, mainly related to the detection of sclerotic dentin by both SW and SD, and normal and carious dentin by PLMQ. It is concluded that contrast-corrected microradiography should be preferred as the gold standard and SM and PLMQ should be avoided, but the relationship of PLMQ with dentin mineralization deserves further investigation.

Using the alveograph in developing requirements for the quality of flour for wafer sheet production

2020 ◽  
Vol 29 (12) ◽  
pp. 52-58
Author(s):  
E.P. Meleshkina ◽  
◽  
S.N. Kolomiets ◽  
A.S. Cheskidova ◽  
◽  
...  
Keyword(s):  
Rheological Properties ◽  
Quality Indicators ◽  
Wheat Flour ◽  
Mathematical Statistics ◽  
Intended Purpose ◽  
The Future ◽  
Relationship Of ◽  
The Relationship

Objectively and reliably determined indicators of rheological properties of the dough were identified using the alveograph device to create a system of classifications of wheat and flour from it for the intended purpose in the future. The analysis of the relationship of standardized quality indicators, as well as newly developed indicators for identifying them, differentiating the quality of wheat flour for the intended purpose, i.e. for finished products. To do this, we use mathematical statistics methods.

Management of Economics and State "Bottom"

2020 ◽  
Vol 17 (6) ◽  
pp. 76-91
Author(s):  
E. D. Solozhentsev
Keyword(s):  
Quality Of Life ◽  
Artificial Intelligence ◽  
Probabilistic Models ◽  
Human Life ◽  
Special Software ◽  
Human Quality ◽  
Relationship Of ◽  
The Relationship

The scientific problem of economics “Managing the quality of human life” is formulated on the basis of artificial intelligence, algebra of logic and logical-probabilistic calculus. Managing the quality of human life is represented by managing the processes of his treatment, training and decision making. Events in these processes and the corresponding logical variables relate to the behavior of a person, other persons and infrastructure. The processes of the quality of human life are modeled, analyzed and managed with the participation of the person himself. Scenarios and structural, logical and probabilistic models of managing the quality of human life are given. Special software for quality management is described. The relationship of human quality of life and the digital economy is examined. We consider the role of public opinion in the management of the “bottom” based on the synthesis of many studies on the management of the economics and the state. The bottom management is also feedback from the top management.

Problematic Internet Use digunakan Ketika Kesepian pada Remaja

2020 ◽  
Vol 14 (1) ◽  
pp. 45-60
Author(s):  
Yashinta Yashinta ◽  
Dwi Hurriyati
Keyword(s):  
Internet Use ◽  
Hypothesis Test ◽  
Problematic Internet Use ◽  
Coefficient Of Determination ◽  
Test Results ◽  
Research Subjects ◽  
Significance Level ◽  
Relationship Of ◽  
The Relationship ◽  
Effective Contribution

This study aims to determine the relationship of loneliness with problematic internet use on boarding students on Silaberanti street in Siantan jaya Opposite Ulu 1 Palembang city. Research subjects numbered 220 people using random sampling methods. Data was collected using a 60 item problematic internet use scale and a 60 item loneliness. Realibility is generated on scale of problematic internet use of 0,955 and loneliness of 0,946.Hypothesis testing uses product moment correlation analysis techniques. Hypothesis test results showed a positive relationshif between loneliness with problematic internet use on boarding students on Silaberanti street in Siantan jaya Opposite Ulu 1 Palembang city r= 0,684 with a significance level of 0,000 (p<0,01). Loneliness in this study made an effective contribution of 46,8% to problematic internet use which can be seen from the coefficient of determination (r²) that is equel to 0,468.

Calculating the aerodynamics of vertical axis wind turbines

2012 ◽  
Vol 34 (3) ◽  
pp. 169-184 ◽  
Author(s):  
Hoang Thi Bich Ngoc
Keyword(s):  
Wind Turbine ◽  
Incidence Angle ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Velocity Triangle ◽  
Relationship Of ◽  
The Relationship

Vertical axis wind turbine technology has been applied last years, very long after horizontal axis wind turbine technology. Aerodynamic problems of vertical axis wind machines are discussible. An important problem is the determination of the incidence law in the interaction between wind and rotor blades. The focus of the work is to establish equations of the incidence depending on the blade azimuth, and to solve them. From these results, aerodynamic torques and power can be calculated. The incidence angle is a parameter of velocity triangle, and both the factors depend not only on the blade azimuth but also on the ratio of rotational speed and horizontal speed. The built computational program allows theoretically selecting the relationship of geometric parameters of wind turbine in accordance with requirements on power, wind speed and installation conditions.

Tire Treadwear — A Comprehensive Evaluation of the Factors: Generic Type, Aspect Ratio, Tread Pattern, and Tread Composition Part I: Introduction and Details on the Organization of the Program

1986 ◽  
Vol 14 (4) ◽  
pp. 201-218 ◽  
Author(s):  
A. G. Veith
Keyword(s):  
Aspect Ratio ◽  
Comprehensive Evaluation ◽  
Test Method ◽  
Interactive Effects ◽  
Data Analyses ◽  
Main Effect ◽  
Systematic Determination ◽  
Relationship Of ◽  
The Relationship

Abstract This four-part series of papers addresses the problem of systematic determination of the influence of several tire factors on tire treadwear. Both the main effect of each factor and some of their interactive effects are included. The program was also structured to evaluate the influence of some external-to-tire conditions on the relationship of tire factors to treadwear. Part I describes the experimental design used to evaluate the effects on treadwear of generic tire type, aspect ratio, tread pattern (groove or void level), type of pattern (straight rib or block), and tread compound. Construction procedures and precautions used to obtain a valid and functional test method are included. Two guiding principles to be used in the data analyses of Parts II and III are discussed. These are the fractional groove and void concept, to characterize tread pattern geometry, and a demonstration of the equivalence of wear rate for identical compounds on whole tread or multi-section tread tires.

DIAGNOSING QUALITY OF FRICTION SYSTEMS OF MECHANISMS OF DEVICES

2019 ◽  
Vol 1 (7) ◽  
pp. 10-13
Author(s):  
D. Yu. Ershov ◽  
I. N. Lukyanenko ◽  
E. E. Aman
Keyword(s):  
Surface Defects ◽  
Diagnostic Methods ◽  
Design Parameters ◽  
Diagnostic Model ◽  
Mechanical Assemblies ◽  
Local Defects ◽  
Relationship Of ◽  
The Relationship ◽  
Production And Operation

The article shows the need to develop diagnostic methods for monitoring the quality of lubrication systems, which makes it possible to study the dynamic processes of contacting elements of the friction systems of instrument mechanisms, taking into account roughness parameters, the presence of local surface defects of elements and the bearing capacity of a lubricant. In the present article, a modern diagnostic model has been developed to control the quality of the processes of production and operation of friction systems of instrument assemblies. With the help of the developed model, it becomes possible to establish the relationship of diagnostic and design parameters of the mechanical system, as well as the appearance of possible local defects and lubricant state, which characterize the quality of friction systems used in many mechanical assemblies of the mechanisms of devices. The research results are shown in the form of nomograms to assess the defects of the elements of friction mechanisms of the mechanisms of the devices.

Sign in / Sign up

Export Citation Format

Share Document