Unconventional Gas Resource and Developing Technology in China

2013 ◽  
Vol 807-809 ◽  
pp. 2115-2119 ◽  
Author(s):  
De Xun Liu ◽  
Hong Yan Wang ◽  
Qun Zhao ◽  
De Lai Liu

Many countries in the world begin to attach great importance to the utilization of the unconventional gas. The unconventional gas resources are very abundant in China. The development of Unconventional Gas is still in the early stage. Tight gas enters large scale and commercializing stage. Coalbed methane (CBM) is in the initial stage of commercialization, and shale gas is in the stage of resource evaluation and technology study. There are mainly three challenges need to confront, uncertainties of unconventional gas resources, key technology with low cost and environmental pollution. So in the future, resource evaluation, engineering technologies and environmental technologies in China need to be strengthened.

2014 ◽  
Vol 675-677 ◽  
pp. 1546-1550
Author(s):  
De Xun Liu ◽  
Hong Yan Wang ◽  
Qun Zhao ◽  
Ying Liu ◽  
Lei Dong

Many countries in the world begin to attach great importance to the utilization of the unconventional gas. The resources of unconventional gas in China are abundant. The development of unconventional gas is still in the early stage. Tight gas enters large scale and commercializing stage. Shale gas is in the initial stage of commercialization. There are mainly three challenges need to confront, uncertainties of unconventional gas resources, key technology with low cost and environmental pollution. So in the future, resource evaluation, engineering technologies and environmental technologies need to be strengthened in China. Tight gas is the most realistic resources to develop in China and the development and utilization of shale gas is the most anticipated. In the next ten or twenty years, the production of unconventional gas in China will increase considerably and play a major role in national hydrocarbon resources.


2012 ◽  
Vol 616-618 ◽  
pp. 250-256 ◽  
Author(s):  
Ded Xun Liu Liu ◽  
Hong Yan Wang ◽  
Qun Zhao ◽  
Hong Lin Liu

Many countries in the world begin to attach great importance to the utilization of the unconventional gas. In some areas, tight gas, Coalbed methane (CBM) and shale gas have came into commercial development. The unconventional gas resources are very abundant in China. They developed rapidly in recent years, and some progress has been made. CBM in Qinshui Basin has been commercially developed successfully. Shale gas resource is also very abundant and has a good development prospect. Besides, the gas hydrate has a great potential in resources.


2012 ◽  
Vol 2 (3) ◽  
Author(s):  
Zhichuan Xu ◽  
Zhuanfang Bi ◽  
Chengmin Shen

AbstractNanomaterials play an important role in modern science and engineering. The ability to fabricate nanomaterials with high quality and low cost is a primary stage for further discovering their applications. This research article presents a facile fabrication of Cu2O nanowires on Cu substrate. It was found that simply heating Cu in air leads to the growth of Cu2O nanowires. The Cu2O nanowires are aligned in one direction and vertically grown on the Cu substrate. The growth process of nanowires was tracked by SEM and the root at the initial stage was observed by HRTEM. The access to oxygen is critical to the growth of Cu2O nanowires and the patterned nanowire arrays can be readily fabricated by using a mask. The method reported here offers a great potential route toward a large scale manufacture of Cu2O nanowires.


Author(s):  
C. Vannuffel ◽  
C. Schiller ◽  
J. P. Chevalier

Recently, interest has focused on the epitaxy of GaAs on Si as a promising material for electronic applications, potentially for integration of optoelectronic devices on silicon wafers. The essential problem concerns the 4% misfit between the two materials, and this must be accommodated by a network of interfacial dislocations with the lowest number of threading dislocations. It is thus important to understand the detailed mechanism of the formation of this network, in order to eventually reduce the dislocation density at the top of the layers.MOVPE growth is carried out on slightly misoriented, (3.5°) from (001) towards , Si substrates. Here we report on the effect of this misorientation on the interfacial defects, at a very early stage of growth. Only the first stage, of the well-known two step growth process, is thus considered. Previously, we showed that full substrate coverage occured for GaAs thicknesses of 5 nm in contrast to MBE growth, where substantially greater thicknesses are required.


2009 ◽  
Vol 160 (5) ◽  
pp. 114-123 ◽  
Author(s):  
Daniel Otto ◽  
Sven Wagner ◽  
Peter Brang

The competitive pressure of naturally regenerated European beech (Fagus sylvatica) saplings on planted pedunculate oak (Quercus robur) was investigated on two 1.8 ha permanent plots near Habsburg and Murten (Switzerland). The plots were established with the aim to test methods of artificial oak regeneration after large-scale windthrow. On both plots, 80 oaks exposed to varying levels of competitive pressure from at most 10 neighbouring beech trees were selected. The height of each oak as well as stem and branch diameters were measured. The competitive pressure was assessed using Schütz's competition index, which is based on relative tree height, crown overlap and distance from competing neighbours. Oak trees growing without or with only slight competition from beech were equally tall, while oaks exposed to moderate to strong competition were smaller. A threshold value for the competition index was found above which oak height decreased strongly. The stem and branch diameters of the oaks started to decrease even if the competition from beech was slight, and decreased much further with more competition. The oak stems started to become more slender even with only slight competition from beech. On the moderately acid beech sites studied here, beech grow taller faster than oak. Thus where beech is competing with oak and the aim is to maintain the oak, competitive pressure on the oak must be reduced at an early stage. The degree of the intervention should, however, take the individual competitive interaction into account, with more intervention if the competition is strong.


1987 ◽  
Vol 19 (5-6) ◽  
pp. 701-710 ◽  
Author(s):  
B. L. Reidy ◽  
G. W. Samson

A low-cost wastewater disposal system was commissioned in 1959 to treat domestic and industrial wastewaters generated in the Latrobe River valley in the province of Gippsland, within the State of Victoria, Australia (Figure 1). The Latrobe Valley is the centre for large-scale generation of electricity and for the production of pulp and paper. In addition other industries have utilized the brown coal resource of the region e.g. gasification process and char production. Consequently, industrial wastewaters have been dominant in the disposal system for the past twenty-five years. The mixed industrial-domestic wastewaters were to be transported some eighty kilometres to be treated and disposed of by irrigation to land. Several important lessons have been learnt during twenty-five years of operating this system. Firstly the composition of the mixed waste stream has varied significantly with the passage of time and the development of the industrial base in the Valley, so that what was appropriate treatment in 1959 is not necessarily acceptable in 1985. Secondly the magnitude of adverse environmental impacts engendered by this low-cost disposal procedure was not imagined when the proposal was implemented. As a consequence, clean-up procedures which could remedy the adverse effects of twenty-five years of impact are likely to be costly. The question then may be asked - when the total costs including rehabilitation are considered, is there really a low-cost solution for environmentally safe disposal of complex wastewater streams?


BMC Biology ◽  
2019 ◽  
Vol 17 (1) ◽  
Author(s):  
Amrita Srivathsan ◽  
Emily Hartop ◽  
Jayanthi Puniamoorthy ◽  
Wan Ting Lee ◽  
Sujatha Narayanan Kutty ◽  
...  

Abstract Background More than 80% of all animal species remain unknown to science. Most of these species live in the tropics and belong to animal taxa that combine small body size with high specimen abundance and large species richness. For such clades, using morphology for species discovery is slow because large numbers of specimens must be sorted based on detailed microscopic investigations. Fortunately, species discovery could be greatly accelerated if DNA sequences could be used for sorting specimens to species. Morphological verification of such “molecular operational taxonomic units” (mOTUs) could then be based on dissection of a small subset of specimens. However, this approach requires cost-effective and low-tech DNA barcoding techniques because well-equipped, well-funded molecular laboratories are not readily available in many biodiverse countries. Results We here document how MinION sequencing can be used for large-scale species discovery in a specimen- and species-rich taxon like the hyperdiverse fly family Phoridae (Diptera). We sequenced 7059 specimens collected in a single Malaise trap in Kibale National Park, Uganda, over the short period of 8 weeks. We discovered > 650 species which exceeds the number of phorid species currently described for the entire Afrotropical region. The barcodes were obtained using an improved low-cost MinION pipeline that increased the barcoding capacity sevenfold from 500 to 3500 barcodes per flowcell. This was achieved by adopting 1D sequencing, resequencing weak amplicons on a used flowcell, and improving demultiplexing. Comparison with Illumina data revealed that the MinION barcodes were very accurate (99.99% accuracy, 0.46% Ns) and thus yielded very similar species units (match ratio 0.991). Morphological examination of 100 mOTUs also confirmed good congruence with morphology (93% of mOTUs; > 99% of specimens) and revealed that 90% of the putative species belong to the neglected, megadiverse genus Megaselia. We demonstrate for one Megaselia species how the molecular data can guide the description of a new species (Megaselia sepsioides sp. nov.). Conclusions We document that one field site in Africa can be home to an estimated 1000 species of phorids and speculate that the Afrotropical diversity could exceed 200,000 species. We furthermore conclude that low-cost MinION sequencers are very suitable for reliable, rapid, and large-scale species discovery in hyperdiverse taxa. MinION sequencing could quickly reveal the extent of the unknown diversity and is especially suitable for biodiverse countries with limited access to capital-intensive sequencing facilities.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Germano Heinzelmann ◽  
Michael K. Gilson

AbstractAbsolute binding free energy calculations with explicit solvent molecular simulations can provide estimates of protein-ligand affinities, and thus reduce the time and costs needed to find new drug candidates. However, these calculations can be complex to implement and perform. Here, we introduce the software BAT.py, a Python tool that invokes the AMBER simulation package to automate the calculation of binding free energies for a protein with a series of ligands. The software supports the attach-pull-release (APR) and double decoupling (DD) binding free energy methods, as well as the simultaneous decoupling-recoupling (SDR) method, a variant of double decoupling that avoids numerical artifacts associated with charged ligands. We report encouraging initial test applications of this software both to re-rank docked poses and to estimate overall binding free energies. We also show that it is practical to carry out these calculations cheaply by using graphical processing units in common machines that can be built for this purpose. The combination of automation and low cost positions this procedure to be applied in a relatively high-throughput mode and thus stands to enable new applications in early-stage drug discovery.


Sign in / Sign up

Export Citation Format

Share Document