Effect of Manganese on Titanium Thin Films Adhesion Deposited on Steel Substrates

2012 ◽  
Vol 326-328 ◽  
pp. 583-586
Author(s):  
R. Gheriani ◽  
Raouf Mechiakh
Keyword(s):  
Thin Films ◽  
Annealing Temperature ◽  
Vacuum Annealing ◽  
Pure Titanium ◽  
Nucleation And Growth ◽  
Thin Solid Films ◽  
X Ray ◽  
Solid Films ◽  
Titanium Thin Films ◽  
Steel Substrates

The mainly property of thin solid films technologies is their adhesion to the substrates. Because of its good wear resistance and its low coefficient of friction against steel, TiC is an attractive coating material for wear applications such as bearing components. The adhesion of TiC coatings, however suffers from insufficient reproducibility, which is probably due to uncontrolled process parameters. In our work pure titanium thin films of approximately 0.6 µm in thickness were prepared on 100C6 stainless steel substrates by cathodic sputtering. The samples were subjected to secondary vacuum annealing at a temperature between 400 and 1000°C for 30 min. The reaction between substrates and thin films was characterized using an x-ray diffractometer (XRD). Surface morphology and elements diffusion evaluations were carried out by scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS). The interaction substrates-thin films is accompanied by nucleation and growth of titanium carbide as a function of annealing temperature. By the SEM and EDS results, it appears clearly that the diffusion of manganese to the external layers leads to the destruction of adhesion especially at high temperatures.

Effect of Heat Treatments on the Structural and Mechanical Properties of Ti Thin Films Deposited on Steel Substrates by PVD Method

2010 ◽  
Vol 297-301 ◽  
pp. 88-92 ◽  
Author(s):  
R. Gheriani ◽  
Rachid Halimi
Keyword(s):  
Thin Films ◽  
Electron Spectroscopy ◽  
Auger Electron ◽  
Annealing Temperature ◽  
Micro Hardness ◽  
X Ray Diffraction ◽  
X Ray ◽  
Titanium Thin Films ◽  
Steel Substrates ◽  
Technological Interest

Titanium carbides are well known materials with great scientific and technological interest. The applications of these materials take advantage of the fact that they are very hard, refractory and that they have metallic properties. In this work, we have studied the influence of the heat treatment temperatures (400-1000°C) on the interaction between the titanium thin films and steel substrates. Steel substrates, 100C6 type (AFNOR norms) containing approximately 1 wt % of carbon were coated at 200°C with titanium thin films by magnetron sputtering. The samples were characterized by X-ray diffraction (XRD) and Auger electron spectroscopy (AES). Vikers micro-hardness measurements carried out on the annealed samples showed that the micro-hardness increases with annealing temperature, reaches a maximum (3500 kg/mm2), then decreases progressively. The growth of micro-hardness is due to the diffusion of the carbon, and to the formation of titanium carbide. However, the decrease of micro-hardness is associated with the diffusion of iron and the formation of iron oxide (Fe2O3). At higher temperatures, we note the formation of titanium dioxide (TiO2).

Effect of vacuum annealing on the properties of one step thermally evaporated Sb2S3 thin films for photovoltaic applications

2021 ◽  
Author(s):  
Emna Gnenna ◽  
Naoufel Khemiri ◽  
Minghua Kong ◽  
Maria Isabel Alonso ◽  
Mounir Kanzari
Keyword(s):  
Thin Films ◽  
Annealing Temperature ◽  
Vacuum Annealing ◽  
Xrd Analysis ◽  
Band Gap Energy ◽  
Chemical Compositions ◽  
Optical Parameters ◽  
X Ray ◽  
Vis Spectroscopy ◽  
One Step

Sb2S3 powder was successfully synthesized by solid state reaction technique using high-purity elemental antimony and sulfur. Sb2S3 thin films were deposited on unheated glass substrates by one step thermal evaporation and annealed under vacuum atmosphere for 2 hours at different temperatures 150, 200 and 250 °C. Different characterization techniques were used to better understand the behavior of the Sb2S3 material. X-ray diffraction (XRD) and Raman spectroscopy confirmed the formation of pure Sb2S3 powder with lattice parameters a = 11.07 Å, b = 11.08 Å and c = 3.81 Å. The effect of vacuum annealing temperature on the properties of the films was studied. XRD analysis revealed that as-deposited and annealed films at 150ºC were amorphous in nature whereas those annealed at T ≥ 200°C were polycrystalline with a preferred orientation along (201) plane. The crystallite size of the polycrystalline films showed a decrease from 75.8 to 62.9 nm with the increase of the annealing temperature from 200 to 250 °C. The Raman analysis showed several peaks corresponding to the stibnite Sb2S3 phase. The surface morphology of the films was examined by atomic force microscopy (AFM). The surface roughness decreases slightly as the transformation from the amorphous to the crystalline phase occurs. The chemical compositions of Sb2S3 films were analyzed by energy dispersive X-ray spectroscopy (EDS), revealing that all films were Sb-rich. The optical parameters were estimated from the transmittance and reflectance spectra recorded by UV-Vis spectroscopy. A reduction in the direct band gap energy from 2.12 to 1.70 eV with the increase of annealing temperature was also found.

scholarly journals A Bibliometric Analysis of the Publications on In Doped ZnO to be a Guide for Future Studies

Metals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 598 ◽  
Author(s):  
Mehmet Yilmaz ◽  
Maria Luisa Grilli ◽  
Guven Turgut
Keyword(s):  
Thin Films ◽  
Solar Cells ◽  
Zno Films ◽  
Applied Physics ◽  
Thin Solid Films ◽  
Future Studies ◽  
X Ray ◽  
Solid Films ◽  
Device Applications ◽  
Doped Zno

This study aims to examine the studies regarding In doped ZnO published in the Web of Science database. A total of 777 articles were reached (31 March 2020). The articles were downloaded for the bibliometric analysis and collected in a file. The file was uploaded to VOSViewer programme in order to reveal the most used keywords, words in the abstracts, citation analyses, co-citation and co-authorship and countries analyses of the articles. The results showed that the most used keywords were “ZnO”, “photoluminescence”, “optical properties”, “thin films” and “doping”. These results indicate that the articles mostly focus on some characteristics of In doped ZnO thin films such as structural, optical and electrical features. When the distribution of the number of articles using the keywords by year was searched, it was found that recent articles focus mainly on synthesis of In doped ZnO film via chemical routes such as sol-gel and hydrothermal syntheses, and on ZnO-based device applications such as solar cells and gas sensors. The most used keywords were also found to be films, X-ray, glass substrate, X-ray Diffraction (XRD), spectra and layer. These results indicate that the studies mostly focus on In doped ZnO thin films as transparent conductive oxide (TCO) material used in device applications like solar cells. In this context, it was found that structural, topographical, optical, electrical and magnetic properties of In doped ZnO films were characterized in terms of defected structure or defect type, substrate temperature, film thickness and In doping content. When the distribution of these words is shown on a year-by-year basis, it is evident that more recent articles tend to focus both on efficiency and performance of In doped ZnO films as TCO in solar cells, diodes and photoluminescence applications both on nanostructures, such as nanoparticles, and nanorods for gas sensor applications. The results also indicated that Maldonado and Asomoza were the most cited authors in this field. In addition, Major, Minami and Ozgur were the most cited (co-citation) authors in this field. The most cited journals were found to be Thin Solid Films, Journal of Materials Science Materials in Electronics and Journal of Applied Physics and, more recently, Energy, Ceramics International, Applied Physics-A, Optik, Material Research Express, ACS Applied Materials and Interfaces and Optical Materials. The most co-cited journals were Applied Physics Letters, Thin Solid Films, Journal of Applied Physics, Physical Review B, and Applied Surface Science. Lastly, the countries with the highest number of documents were China, India, South Korea, USA and Japan. Consequently, it is suggested that future research needs to focus more on synthesis and characterization with different growth techniques which make In doped ZnO suitable for device applications, such as solar cells and diodes. In this context, this study may provide valuable information to researchers for future studies on the topic.

Effect of Annealing temperature on the Structural and Magnetic Properties of TbxY3-xFe5O12(x = 0.0, 1.0, 2.0) Thin Films Prepared by Sol-Gel Process

2012 ◽  
Vol 501 ◽  
pp. 236-241 ◽  
Author(s):  
Ftema W. Aldbea ◽  
Noor Bahyah Ibrahim ◽  
Mustafa Hj. Abdullah ◽  
Ramadan E. Shaiboub
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Room Temperature ◽  
Annealing Temperature ◽  
Sol Gel ◽  
Vibrating Sample Magnetometer ◽  
X Ray ◽  
Garnet Phase ◽  
Sol Gel Process ◽  
Amorphous Structures

Thin films nanoparticles TbxY3-xFe5O12 (x=0.0, 1.0, 2.0) were prepared by the sol-gel process followed by annealing process at various annealing temperatures of 700° C, 800° C and 900° C in air for 2 h. The results obtained from X-ray diffractometer (XRD) show that the films annealed below 900°C exhibit peaks of garnet mixed with small amounts of YFeO3 and Fe2O3. Pure garnet phase has been detected in the films annealed at 900°C. Before annealing the films show amorphous structures. The particles sizes measurement using the field emission scanning electron microscope (FE-SEM) showed that the particles sizes increased as the annealing temperature increased. The magnetic properties were measured at room temperature using the vibrating sample magnetometer (VSM). The saturation magnetization (Ms) of the films also increased with the annealing temperature. However, different behavior of coercivity (Hc) has been observed as the annealing temperature was increased.

High resolution hard X-ray photoemission using synchrotron radiation as an essential tool for characterization of thin solid films

2006 ◽  
Vol 252 (15) ◽  
pp. 5602-5606 ◽  
Author(s):  
J.J. Kim ◽  
E. Ikenaga ◽  
M. Kobata ◽  
A. Takeuchi ◽  
M. Awaji ◽  
...  
Keyword(s):  
High Resolution ◽  
Synchrotron Radiation ◽  
Thin Solid Films ◽  
X Ray ◽  
Solid Films ◽  
Essential Tool

scholarly journals A Study on the Characteristics of Cu–Mn–Dy Alloy Resistive Thin Films

Coatings ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 118 ◽  
Author(s):  
Ho-Yun Lee ◽  
Chi-Wei He ◽  
Ying-Chieh Lee ◽  
Da-Chuan Wu
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Annealing Temperature ◽  
Phase Evolution ◽  
Amorphous Structure ◽  
X Ray Diffraction ◽  
Temperature Coefficient Of Resistance ◽  
X Ray ◽  
Transmission Electronmicroscopy ◽  
Scanning Electron

Cu–Mn–Dy resistive thin films were prepared on glass and Al2O3 substrates, which wasachieved by co-sputtering the Cu–Mn alloy and dysprosium targets. The effects of the addition ofdysprosium on the electrical properties and microstructures of annealed Cu–Mn alloy films wereinvestigated. The composition, microstructural and phase evolution of Cu–Mn–Dy films werecharacterized using field emission scanning electron microscopy, transmission electronmicroscopy and X-ray diffraction. All Cu–Mn–Dy films showed an amorphous structure when theannealing temperature was set at 300 °C. After the annealing temperature was increased to 350 °C,the MnO and Cu phases had a significant presence in the Cu–Mn films. However, no MnO phaseswere observed in Cu–Mn–Dy films at 350 °C. Even Cu–Mn–Dy films annealed at 450 °C showedno MnO phases. This is because Dy addition can suppress MnO formation. Cu–Mn alloy filmswith 40% dysprosium addition that were annealed at 300 °C exhibited a higher resistivity of ∼2100 μΩ·cm with a temperature coefficient of resistance of –85 ppm/°C.

Structural and Optical Properties of TiO2 Thin Films Prepared by Thermal Oxidation of Ti Thin Films

2013 ◽  
Vol 770 ◽  
pp. 225-228
Author(s):  
L. Uttayan ◽  
K. Aiempanakit ◽  
M. Horprathum ◽  
P. Eiamchai ◽  
V. Pattantsetakul ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Thermal Oxidation ◽  
Annealing Temperature ◽  
Oxidation Process ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Wafer Substrate ◽  
Uv Visible ◽  
Ti Films

Titanium dioxide (TiO2) films were prepared by thermal oxidation from Ti films. The Ti films were deposited on glass and silicon (100) wafer substrate by dc magnetron sputtering and subsequent with thermal oxidation process. The crystal structure and morphology of TiO2 films were estimated by using X-ray diffractometry (XRD) and field-emission scanning electron microscopy (FE-SEM), respectively. The optical property of TiO2 films was determined by UV-Visible spectrophotometer. The influences of annealing temperature between 200 to 500°C in air for 1 hour on the structure and optical properties of TiO2 films were investigated. The increasing of annealing temperature was directly affected the phase transition from Ti to TiO2. The optical and structural properties of TiO2 films are the best exhibited with increasing the annealing temperature at 500 °C.

Microstructure and Mechanical Properties of Chromium Carbide Coatings Deposited by Magnetron Sputtering Technique

2019 ◽  
Vol 397 ◽  
pp. 118-124
Author(s):  
Linda Aissani ◽  
Khaoula Rahmouni ◽  
Laala Guelani ◽  
Mourad Zaabat ◽  
Akram Alhussein
Keyword(s):  
Thin Films ◽  
Mechanical Properties ◽  
Magnetron Sputtering ◽  
Structural Properties ◽  
Annealing Temperature ◽  
Diffusion Mechanism ◽  
X Ray Diffraction ◽  
Chromium Carbides ◽  
X Ray ◽  
Mechanical And Structural Properties

From the hard and anti-corrosions coatings, we found the chromium carbides, these components were discovered by large studies; like thin films since years ago. They were pointed a good quality for the protection of steel, because of their thermal and mechanical properties for this reason, it was used in many fields for protection. Plus: their hardness and their important function in mechanical coatings. The aim of this work joins a study of the effect of the thermal treatment on mechanical and structural properties of the Cr/steel system. Thin films were deposited by cathodic magnetron sputtering on the steel substrates of 100C6, contain 1% wt of carbon. Samples were annealing in vacuum temperature interval between 700 to 1000 °C since 45 min, it forms the chromium carbides. Then pieces are characterising by X-ray diffraction, X-ray microanalysis and scanning electron microscopy. Mechanical properties are analysing by Vickers test. The X-ray diffraction analyse point the formation of the Cr7C3, Cr23C6 carbides at 900°C; they transformed to ternary carbides in a highest temperature, but the Cr3C2 doesn’t appear. The X-ray microanalysis shows the diffusion mechanism between the chromium film and the steel sample; from the variation of: Cr, Fe, C, O elements concentration with the change of annealing temperature. The variation of annealing temperature shows a clean improvement in mechanical and structural properties, like the adhesion and the micro-hardness.

Sign in / Sign up

Export Citation Format

Share Document